ターボレーシング(C72)分解メンテナンス交換ボディ情報付きTurbo racing disassembly maintenance! With exchange body information

[@bogeybass5150hks]

本日ミニクーパーが届き遊んでたところ、 フロントロック。原因は一緒にじゃれてた 猫の毛でした。早速この動画にたどり着き 部品も無くさず復活しました！ ありがとうございました♪

[@daveferguson3920]

Just received my C73. Might have got some wrong when reassembling the steering unit, because the steering feels different! Your video is currently the most helpful guide to mataine the chassis that I've seen.as an English man having the English subtitles is a great help to understanding the examples showed in this video! Had I subscribed to your channel earlier and watched this video you would have saved me a lot of time and hassle. No one to blame but myself. I won't forget this time ! New subscriber!!!!!!

[@umenyan0049]

I would be honored if it could be of any help to you. We also apologize for the fact that the English text of the translator may be difficult to understand. Thank you.

[@PaoloCalvi]

Thank you, you saved my day! On the C71 that I have the spring was continuously jumping off so I decided to put a very tiny drop of super-glue at the end of it so the whole process has become less stressful and the spring will never be lost again.

[@umenyan0049]

The front springs are small, so it's frustrating when they come off.😅 It would be nice to have a light stop.👌

[@georgivoyvodov1123]

I am an owner of 17 cars from Turbo racing and doing also maintenance from time to time, but ! Never aplay any lubricants to the friction part as any grease or oil easily attract the dirt and dust to stick on the greased surfaces and parts. My opinion and advice is : just clean your "bugs" only from dust with tiny brush and don't lubricate.

[@umenyan0049]

Yes, it is. Do not put oil on turbo racing. It's important to remove dust and other things tangled in the axle shafts.😊

[@turbroracing3431]

Great tutorial, thank you for taking the time to record!!

[@umenyan0049]

I am honored to help you.

[@daveferguson3920]

Forgot to say really wanted a display case to go with my Dnano and mini z. Thanks for sharing the information in this video and discription

[@teambookoka4004]

ありがたや〜🙏

[@umenyan0049]

お役に立てて幸いです😊

[@平田宏一-e6m]

C73にC71のボディは付きますか

[@umenyan0049]

大きさがかなり違ったと思いますので改造しないと付かないと思います😊

[@Przemo-c]

Damn lost that tiny front suspension spring And i was extremely carefull... Either that or mine didn't have oone as one of the wheels was sunken before i took it apart. Also sometimes I had the issue of steering lag in one direction. It would move immediately back and forth in one direction and it would move slowly in the other direction.

[@umenyan0049]

文 英語（US） You didn't have a spring from the beginning, or it flew away without you knowing. It's better to have a spare. I've lost mine twice. The steering wheel may be off to one side if you over-tighten the screws on the base (front side). Or you may have some dust somewhere in there.😀

[@Przemo-c]

@@umenyan0049 spread ordered spares for now a tiny bit of foam makes up for a list spring. And the slow sterling issue was before and after cleaning in one direction but both on return to center and deflection like a rate for motor was set at lower speeds not sure if it's the controller sending had signal or receiver putting out bad one to the motor but it's not mechanical friction.

[@umenyan0049]

@@Przemo-c Could there be something wrong with the sensor in the steering wheel? Try to reassemble it again, paying attention to the orientation of the parts. If it still doesn't work, the sensor in the base may be bad😯. Hope it gets better!

[@Przemo-c]

@@umenyan0049 Will take a look at it next time I open it but it looks more like what I saw with failing RC receivers on fixed wings bad output from them to servos.

[@umenyan0049]

@@Przemo-c Turbo racing cannot be disassembled because the base and sensor are one piece. If it is defective, repair is impossible. The servo motor is an ordinary can motor type, and spares are available. If the motor is defective, you will need to solder it. In the meantime, you need to disassemble and inspect it to determine the cause. I hope you get it fixed!

[@turbroracing3431]

Have you tried putting an upgraded motor in one of the C71/72/73’s?

[@umenyan0049]

An acquaintance KZbinr did it. I put the upgrade motor of the mini cooper on C71. It seems that it was too early and difficult to control. I have only used upgrade motors for mini coopers. It's faster. Right now, I'm interested in what happens if I put a C81 motor on it 😅