Tự làm bộ lăn bóng siêu đẹp cho máy tiện

hôm nay mình hướng dẫn làm bộ lăn bóng (lăn bi) cho trục, lăn bi tạo bóng cho trục, đơn giản hiệu quả, sau khi lăn bóng bề mặt láng mịn và cứng cho anh em gia công chính xác vào vòng bi hoặc bánh răng hoặc làm ty thủy lực

[@mbananahead2524]

Awesome take on an old idea of tools to add a smooth shiny finish, but this is so much better than any regular form tool, I’m so impressed I’m going to make one for my machine, thank you so much for sharing

[@PavelKralKafeman]

Watching steel work, as well as wood, is satisfying and reassuring. I'm also glad that KZbin music isn't used.

[@WickedWood]

You are a skilled master of your craft. Thanks for showing us all how you do this in detail. Excellent video!

[@phuocnguyen6010]

Cảm ơn vì những chia sẻ nầy!!

[@hoathepviet]

Chuyên nghiệp. độ hoàn thiện sản phẩm tốt. chúc mừng e.

[@dennistennyson8856]

This is the best design and build that I have seen of this type of tool. Well done.

[@inhchinh832]

Vừa bóng đẹp vừa làm cứng bề mặt

[@Radiotexas]

VERY nice work! Never seen a tool like this before! THANKS!

[@nguyentrunghieu9068]

Nhìn mê quá luôn🎉❤😊

[@roadshowautosports]

This is awesome idea! I was wondering what was he doing throughout the video but at the end, it’s awesome!! I must agree with a previous viewer that it would add hardness to the surface and that makes it even better! Great job!!!

[@karlalton3170]

Công cụ tuyệt vời anh em 😁😁🤘🤘

[@adambergendorff2702]

Excellent build! The best looking version of this tool I've seen!

[@marley589]

Try looking for pattern burnishing for the next level.

Quá độc đáo và rất hay, mới mẻ. Cảm ơn bạn đã chia sẻ 👍👍👍👍

[@khampha-sangtao]

Cảm ơn anh chúc anh sức khỏe

[@NhoNgo198]

​@@khampha-sangtaoquá hay,có bán sp này ko bạn ơi

[@keal4825]

Rất giỏi và sáng tạo, tài năng !

[@user-xt1zg7kw1i]

Надо было прорезать паз подшипника глухим, что бы иметь возможность наполнять маслом эту полость. Масло лучше использовать с добавлением молибдена

[@user-fm4jl6us4f]

Толково.

[@dennistennyson4540]

This is the best design and build that I have seen so far.

[@opieshomeshop]

Machinist? Or Wizard? You decide. I’m willing to bet this tool adds a certain amount of surface hardness to the part as well. Very impressive. I’m going to have to make one of these. 😊

[@JaakkoF]

Doesn't add hardness unless the material is work hardening kind (like 304 stainless). Surface tension goes up, as this is imparting the same type of stresses to the material surface as cold rolling/forming/drawing does.

[@opieshomeshop]

@@JaakkoF I didn't ask you for one. I own a machine shop for 2. I never gave ANY specifics about anything other than a base generalization. Jeerko!

[@skirmish3889]

Упрочнение поверхности однозначно даёт твёрдость и увеличивает эксплуатационные характеристики, молодец 👍🏻

[@pieterveenders9793]

@@JaakkoF It does surface harden it, just like shot peening for example would.

[@bigboreracing356]

Yap yap yap yappity yap. Check out my latest video on how to fix a SCAT CRANKSHAFT crankshaft that looked like crap out of the box.

[@jorgepaulo300]

Bacana é muito didático a forma de apresentar seu trabalho é inspirador excelente 👍👍

[@flavioBohemio66]

parabens cara,,,, você é demais.......super criativo......to aprendendo contigo

[@GenauMann]

Excellent Idea 👍 Great video 👍 When I finish my current project I am going to build one, and try it out👍

[@user-vw6sg5sk1l]

Tuyệt vời bạn à

[@kennethjanczak4900]

Nice and inspiring job. Thanks for taking the time to make the video and share

[@BLACKCATMODDING]

Quá đẹp

[@MrRctintin]

Excellent work, lovely tool, well done from the U.K. 👍

[@masterQ20]

You are doing great! You did a great job!

[@aldeen19]

Neatest work I have ever seen.. good job man keep it excellent.

[@Lone-Wolf87]

Very nice. That tool does a great job. Well done. 👍👍👍👍

[@StripeyType]

This is good stuff! I wonder whether running a shear-type tool before this would improve surface finish even further? Honestly, it might be worth me just trying it out to see. Thanks so much for sharing this!

[@madeiraemetal]

Bom vídeo. Mostra algo realmente útil e prático para acabamento no torno mecânico.

[@sergtokarka]

Great job, hello from Russia!

[@alfredofernandez4617]

Excelente trabajo, ojala tuvieras planos de fabricación.

[@ba208]

Wonderful!! Please, what are: (1) the diameter of the bearing ball? Is it 11/16" = 0.6875" = 17.46mm? (2) the type of the ball bearing (d/D/h)? Is it 6202 2RS = 15mm x 35mm x 11mm? Tuyệt vời!! Xin vui lòng, là gì: (1) đường kính của quả bóng mang? Có phải 16/11" = 0,6875" = 17,46mm không? (2) loại ổ bi (d/D/h)? Có phải 6202 2RS = 15mm x 35mm x 11mm không?

[@Arckivio]

None of what you've asked matters. You use whatever ball & bearing you want & make to your size.

[@DavidSmith-ib5jl]

Great video with excellent machining and I am going to make one!

[@chanhnguyen9608]

Đã qá cháu Lễ ơi. Nhìn cháu gia Công mà như hàng Công nghệ á

[@khampha-sangtao]

Dạ cảm ơn chú. Chú quá khen rồi

[@conantdog]

Excellent design and fabrication,👀👌

[@rafaellastracom6411]

There´s something cool about roller burnishing to me. This one´s gorgeous.

[@camillosteuss]

I`m not 100% who did a video on the topic, but if i find it, ill tell you here, but there is someone on youtube who made a certain roller burnishing tool for the milling machine... The pattern that that thing leaves is wicked... An absolutely stupid idea in my view... Allegedly it was thought as a good idea at one point in the past to replace scraping, but the only type of scraping it could replace is the scraping for oil retention, and even there, you would have to re-grind the surface as the burnishing rises the surface around the valleys... Not just that, but you still need a monstrously large machine that is monstrously precisely hand scraped for precision to actually be able to rely on that kind of tooling to ``replace scraping by hand`` which is a bit of an oxymoron from where i`m standing... But as a surface finisher it is a damn brilliant tool... Depending on the speed it leaves tighter and tighter pattern, which by logic tells you that for oil retention - you would have to have the tool turning quite slowly as not to disturb the bearing surface all too much... If i don`t post which channel uploaded the vid, just search it out, you wont be able to miss it... If you like burnishing, the sight of the surface finish that that tool leaves will please you greatly... All the best! P.s. edit - the video is ``2 ball pattern burnishing`` by engineering hacks and tricks...

[@KamiCrit]

Awesome tool and video! Any idea how much the dimensions change on the part before and after burnishing?

[@dmitryzebzeev2010]

Just perfect❤. Very Cool ! Keep going, man !

[@cuongdonhatbai]

Quá hay anh ạ.

[@khampha-sangtao]

Dạ cảm ơn anh, chúc a nhiều sk

[@tienly5705]

Hay qua a oi

[@CoolIdeasDIY-qv1nz]

Excellent Idea 👍

[@user-eq9xq8km1l]

Excellent travail !!!! plein de minutie cela donne de bonnes idées pour s'entrainer a la réalisation d'outils.

[@davidjames1007]

Nice work, thanks for sharing

[@Omphitbodoh69]

Wooow amazing brother. Godbless you and getting better

[@nickb3005]

The art of burnishing. Nice tool.

[@muhibcomertel1281]

Elinize sağlık çok güzel oldu 👏👏👏

[@BCM1959]

Clean job. Very nice.

[@Eduardo-ff8um]

Fantastico el sitema derecalcado gracias.😊

[@laurentc.8742]

Merveilleux, félicitation!

[@Bianchi77]

Nice video, thank you :)

[@bahadersingh8880]

Best workmanship congratulations

[@atvheads]

I have seen it before, but this is a nicer build.

[@Hang_bai_Can_Tho_65]

Tay nghề giỏi nè, hôm nào chế súng bạn ơi 😂

[@Macos9966]

Ótimo trabalho Parabéns

[@piet8803]

Well done! Very profesional.

[@arachnipope]

Beautiful ! Well done !

[@nicolasbernal5542]

Exelente idea para dar un mejor acabado.

[@2008koss]

nice work ! you are better than Ca Lem !

[@madeingarage7040]

Perfect👏

[@philnewcomers9170]

they would of loved you at the training school .Only trouble is you cant shoulder the ball but nice idea it has not quite got rid of emery cloth and ground finnishes ttfn&ty

[@davesmith9325]

Excellent ! I need to make one !

[@jonathanandtalley4391]

That Awesome like to make make me one for my mini metal lathe 7x14. Good job .

[@stevegpsych68]

Omg what a beautiful lathe ........

[@Roberto-wl5fg]

Compliments ! Could you tell me the measurements of the components you used? Thank you very much.

[@spm2508]

before and after finishing so deapth of cut...can ...

[@josehuanquil6260]

Hola mi chico inteligente que talento mi chico hermoso

[@chriswilkinson2548]

Bloody good mate from Australia

[@wallesjones1033]

Não entendo dessa área. Pra que serve essa ferramenta com uma esfera de aço na ponta

[@Stubytube]

Excelente!!!

[@user-yz7sr2oq9q]

Wow, Nice.

[@hibahprice6887]

it would be nice if you measured the diameter before and after, as well as the hardness

[@aidarosshinaalyarimi5839]

Thank you for sharing

[@paulbfields8284]

I like your style… bet I could make it twice as fast as this…😂… you have some nice tooling as well. This is a good idea when you need a “ground” surface quality.. I have to wonder how much change in diameter from the turning portion to the finished “rolled” version(?)

[@cuongandmari]

Half to 1mm depending on metal hardness.

[@JaakkoF]

@@cuongandmari You have a decade or two error in those numbers.

[@Lemming1970]

@@cuongandmari LOL I think not.

[@josehuanquil6260]

Hola mi chico hermoso buen video mi papi lindo

[@Marta_De_Jesus]

Fantástico 👏🏻

[@kaiken6104]

very smart, congratulations.

[@josehuanquil6260]

Hola presioso saludos mi chico hermoso

[@mfs5493]

What is this process called - burnishing?

[@DavidM2002]

Brilliant. But, I do wonder if you made a small stainless steel wheel, with a rounded profile, that was a press fit over the bearing, if he would accomplish the same thing. I would be careful how much pressure is applied to the work as the headstock bearings could suffer not unlike when using some knurling tools. If you want to add to the complexity as bit, make the tool spring loaded so the pressure is always consistent. If I used my lathe more, I'd make one of these.

[@JaakkoF]

You want to have that wheel be hardened, ground and polished. Cheap&dirty option is to use the corner of the bearing itself to do this operation. As for spindle bearings, you can not impart such forces that would destroy the bearings in any non-hobby lathe with the cross slide screw without something else breaking first. If yor bearings get shot from knurling, then either the knurling process has something wrong with it or your bearings were loose or shot already.

[@DavidM2002]

@@JaakkoF Thanks for your insight.

[@Sera69FI]

Nice work.

[@phatthai105]

Sắm thêm cái máy cắt dây nữa sẽ hổ trợ rất nhiều trong Cv, chúc Sk nhé

[@khampha-sangtao]

Cảm ơn anh, chúc a nhiều sk

[@philnewcomers9170]

it makes one wonder how a hardened roller would perform in under cuts for example of cource the sides of the uc would contain the roller ttfn&ty

[@olegevstigneev5367]

Молодец.

[@Manufacturingsite1]

Technical interesting work

[@josehuanquil6260]

Hola mi chico hermoso buenos videos mi chico hermoso

[@showkatshah6988]

Great job

[@Zobakka]

Молодец!

[@ucuy3706]

Tốt

[@kentuckytrapper780]

Excellent tool..

[@kimhunglai7845]

Làm màu quá bạn à

[@phongdinhchi1805]

Sao lại màu nè?

[@vanquynguyen8298]

@@phongdinhchi1805: Có thể đơn giản là do không hiểu tác dụng của việc làm đó : tạo ứng suất dư nén , tăng sức bền mỏi cho trục .

[@tranviethung12.70]

Lăn nv trục có bị nhỏ đi nhiều ko nhỉ?

[@ucNguyen-ur5fp]

Có nhận gia công lỗ lục giác trên ốc k a

[@josehuanquil6260]

Hola mi chico hermoso que buenos videos mi papi hermoso

[@arnostoermer3563]

Genial!❤

[@Leatherman154]

This tool is used for burnishing. Is how you get a nice surface finish, with minimal effort.

[@sameskremlin6777]

Dear colleague, Is it possible for you to provide drawings for this project? I would really like to be able to build one like it.

[@derekturner3272]

I'm going to make one with a carbide bearing. Will let you know how it works out.

[@user-qb3vp5qt8x]

Счастливый человек

[@alexandrniforov4896]

Молодец👍

[@user-js3vc6lt2v]

Этот процесс помоему называется накатка. Делает поверхность "зеркальной" и придает ей твердости.

[@user-qg5qd4ln3r]

Просто супер 🔥🔥

[@azarellediaz4892]

I had never seen a metal burnisher, not only impressive but the tool is very elegant and well built. Are the drawings available for sale?

[@dperfetti1]

That's a great question.