Horace needs his own RWS book: Story One: So far, so good. Story Two: Paint Problems. Story Three: Naming nonsense. Story Four: The drop.
@ianjackson47212 жыл бұрын
Songs?
@TankEngine752 жыл бұрын
The book title should be Horace The Kerr Stuart Tattoo Tram (Kerr Stuart Tattoo is Edward Thomas's and Peter Sam's class)
@ewanfawkes27082 жыл бұрын
@@TankEngine75 Horace the Corris engine.
@thechair3712 жыл бұрын
Book name: Horace the wretched engine.
@theamazingadventureofeduardo2 жыл бұрын
I already write a book about him!
@22Tesla2 жыл бұрын
How I avoid brush strokes: basically making the layer of paint as THIN as possible by spreading it out as much as I can. One brush load, I spread that brush load of paint as much as I can before the paint can't go any further and keep doing that till it looks thin enough. I then repeat it as often as I need to get a complete coat. Another method I've used is putting some paint in some sponges for makeup and then just dabbing the model until no more paint comes out then letting it dry before repeating. Repeat about 5-6 times, and the coat is generally thick enough to look smooth and consistent. The thin paint layers don't take long to dry since the layer of paint is so thin, but a tiny fan helps speed up the drying time.
@JojoCat20082 жыл бұрын
I follow how @Trackside Studios 06. Does it: Many thin coats are better than few thick coats. - its true as you're adding in layers to make it have its color. I brush in One Direction. You only need 4-8 Coats if you're brush painting, 4 as a minimum if you have an undercoat.
@Yogasefski2 жыл бұрын
If all else fails, you could turn him into a model of a generator.
@generalprincecodyhedgewolf29442 жыл бұрын
Like smudger
@22Tesla2 жыл бұрын
Just like how Awdry dealt with his model of Stanley on his layout
@lowfurts2 жыл бұрын
And if that fails too you could turn it into a scrap prop
@romycarldelacruz1980 Жыл бұрын
*”HAHAAHAHHAA”* -smudger
@Graysonthegreenivatt2MT9 ай бұрын
Boy (hand slaps face)
@BlaxlandRidge32 жыл бұрын
Your commentary is hilarious, and I admire your ability to just laugh it off and know better for next time. Modelling is a learning curve and you will only get better. He looks great so far!
@chesapeakedproductions30092 жыл бұрын
Speaking from experience?
@rottenroads19822 жыл бұрын
I legitimately Laughed when you said you would name the engine “Poop Stain”. So Hilarious 😂. However, it’s not Poop Stain and I am now not happy.
@carstrainsandcrossings86392 жыл бұрын
Lol same
@rottenroads1982 Жыл бұрын
However, jokingly calling his engine Poop Stain & then revealing the real name gave me and Idea. An engine whose nickname is Poop Stain Puffer, but his normal name is just Puff.
@SodorTrain12252 жыл бұрын
That little guy is adorable!
@TheArtisticGod98412 Жыл бұрын
Very!
@Flyingdurito2 жыл бұрын
Not gonna lie, for a first time model it’s actually pretty good, getting that new airbrush definitely made the process easier
@CommunityBrightHunt328 Жыл бұрын
1:58 -> I died laughing when you called the engine, “Poop Stain”
@Fanoflarryboy972 жыл бұрын
That looks so cool! You know, I sometimes make my own HO models out of scratch with only using: a hot glue gun (to stick the pieces together) some HO bogies ( for the wheels) and finally, some cardboard (most of my custom HO trains I’ve made are mostly made out of cardboard. Some of them are just old engine parts I have lying about.)
@rmarsh93872 жыл бұрын
Modeling making isn't as easy as some may it out to be sometimes, but you can only improve moving forward. Horace looks good for what he is so far.
@UsefulEngine112 жыл бұрын
Personally man at a first attendant of modeling this isn't really bad I mean it's better than what I can make as I'm not really a modeler. Then again hopefully if you try this again hopefully it will work out better the second time.
@TrainFanProductions49352 жыл бұрын
Honestly, you didn’t do that bad of a job. I think that you made a pretty good model. It’s not in that bad of a condition. Some glue and new couplings will likely do the trick.
@c4m3r0n2 жыл бұрын
This’ll be interesting!
@cplayzstuff69072 жыл бұрын
Innit
@RWSfan20242 жыл бұрын
Lemme guess: when you get enough sets, engines, etc: you’ll make a Bachman remake of Peter Sam and the Refreshment Lady? Horace actually looks incredible, shame he got ruined when you arrived at Chicago
@Steamenginesunited34562 жыл бұрын
I quite like this model.
@OldFrailandDecrepit2 жыл бұрын
Loved the video, because it was the story all my attempts at customizing.
@theoneandonlynumber12532 жыл бұрын
Thomas1edward2henry3 yea hand painting is a pain but It took me 2 fricking years to learn how also tuansk for showing the website to get the model kits I've been trying to find one
@jamesthomas5109 Жыл бұрын
6:22 Would love to see Horace in a future episode, best wishes. 🚂
@gavinomeara2 жыл бұрын
The prodigal son returns
@Legomastr3652 жыл бұрын
He's very cute! You're being very hard on yourself. Yeah OO9 modelling can be an absolute nightmare. Making Sir Handel and Duncan were very tedious processes but as long as you have a positive outlook everything will turn out alright. A few tips I could give you for this; paint pens are a lifesaver. If you wanna do the safety valves and chimney caps in gold, definitely get a gold paint pen. Much easier to do than hand paint it in yellow. For name and number plates, etched is the way to go. Narrow planet let's you customize name and number plates to your liking. It takes about 8 weeks to develop and then 1 or 2 weeks to ship to you but they look so much more professional than transfers. Also, spray painting, imo, is easier than air brushing. You could spray the whole engine in red and then hand brush the black parts, or air brush them if you really think that would be easier. Other than that he's a very adorable engine, and I might get one for myself! Sorry to hear about the tramskirts breaking but I hope you can get him fixed soon!
@Trainboy172 жыл бұрын
1:57 Poop Stain And that Folks is when I lost it
@USRA_Fanatic2 жыл бұрын
I think ya did terrific!! Yes the model’s probably been a pain, but I still think ya did marvelous!!
@valesbridge_yt10 ай бұрын
As someone who hand paints models, one tip i can give is, use a smaller brush, that way you can avoid the paint lines
@bigbuffersproductions2 жыл бұрын
It’s my favourite engine Poop stains. This is a really nice model so unfortunate that you went through all that
@carstrainsandcrossings86392 жыл бұрын
Too bad the character isn’t canon lol
@ajaxengineco2 жыл бұрын
I used the same KATO chassis under my Kerr Stuart Skylark side tank, & the couplings kinda stopped being attached before the model was even painted. Also the body got into a bit of an accident (overzealous filing pre-painting) and ended up losing the rear buffer beam & bunker. Painting did cover that, though, once I'd glued the whole back together again. I brush-painted mine, first in an ugly olive green colour, & the brush kept losing bristles which was a pain, and brush strokes ruled the day. In the end I gave it up as a bad job, and switched to a nicer Red Oxide paint, which I had handy, though with the same crappy brush. However, because I used Pheonix Precision Paint that time, which I swear is magical, I managed to avoid brush strokes. I call the little engine all manner of names, and even made up six small wagon kits to go with her. No layout yet, just a length of track. Because as mentioned the original couplings went up the spout, I gave her chain couplings nicked from an OO model, and even buffers. The wagons have N-scale chains on them, which are bit clogged with paint, and also they don't have hooks so they're kind of stuck as two unconnected rakes of three.
@medwaymodelrailway71292 жыл бұрын
Wow enjoyed your latest video thanks for sharing.
@cadenthecadburyengine81982 жыл бұрын
In may, Kato is releasing Prince and Princess, so those could look nice
@rmsteutonic3686 Жыл бұрын
For brush strokes, I like to use paddle pop sticks with sand paper on them. Works well
@brightredmogul19122 жыл бұрын
The Slow Mental Decline of T1E2H3, circa 2022
@DocterGeko2 жыл бұрын
Just a heads up, quite alot of Ebay 3D models are actually stolen models from Shapeways so it's best to be carful as the money might not go back to the original creator.
@SuddyMuggy2 жыл бұрын
Loving the way Horace is looking!! Although I think gold for whistle and funnel cap would look really smooth :) Still he looks very smooth.
@jessewebb28265 ай бұрын
Yeah. I feel your pain on the name plates there.
@WesternOhioInterurbanHistory2 жыл бұрын
airlines will often destroy model train, even if you do your absolute best to protect them
@greenninjalloyd43762 жыл бұрын
What smart little engine!!!
@Killdane2 жыл бұрын
That little guy looks amazing! “This is the sad story of my life” Lmao Not tying to be rude
@Brianrockrailfan2 жыл бұрын
great video
@KeruToL2 жыл бұрын
Horace the horrible Is really quite adorable
@CommunityBrightHunt3282 жыл бұрын
The title screen that had the engine with the truck face gave me the heebie-jeebies
@roaropgard85752 жыл бұрын
Smart work 😎👍
@ScaryGT8242 жыл бұрын
Bloody hell that is amazing! And you can easily make a RWS peter Sam just take off the side plates and boom ya done!
@Veggietalesfan22 жыл бұрын
That's a nice video. You did try your best. And after all, practice does make perfect.
@fridaynightfunkinfan56272 жыл бұрын
P o o p S t a i n . 🌀
@Trainboy112 жыл бұрын
Nice work buddy
@cplayzstuff69072 жыл бұрын
Content
@ps73722 жыл бұрын
You have my sympathy.
@Mr.toasterandclay2 жыл бұрын
Nice job man
@Majinsonicsudios70252 жыл бұрын
the Well SH*T Part I laughed So Hard
@joshuaW56212 жыл бұрын
This locomotive looks like it could fit perfectly well on a Mid Sodor layout.
@manuelbrewer69272 жыл бұрын
Well, you tried and that's all that matters. I'm very proud of you.
@project-x17482 күн бұрын
Hi thomas1edward2herny3, I know this video is too years old and i’m pretty late to it but I advise that you used this paint called Apple barrel matte. Yes I know the paint don’t have a glossy or reflective finish, and it’s a matte color but it’s so smooth and easy to paint and clear if you make any mistakes. I also advised to beware of yellow because it is a bitch to work with. Yes white is the same but it’s not as bad as the yellow paint (for me).
@heritagerailwayproductions18852 жыл бұрын
If you can't figure out the decal nameplates then you could buy some custom etched plates from Light Railway Stores
@user-ix6dm6tu4f Жыл бұрын
Next model you should make: a hymalayan locomotive from Shapeways called "Darjeeling inspired tram kit." only abt 50$ including shipping.
@Trollingdemon_072 жыл бұрын
Alternative title: T1E2H3 fails at making a RWS Peter sam model
@Micktrap397 Жыл бұрын
5:56 You’re not the only one who had a sad story, Recently I was trying to fix the left buffer on my copy of the Hattons Genesis Break Coach in a LBSC livery, but I end up having some glue marks on it in process. Kinda sucks isn’t it?
@tonyromano6220 Жыл бұрын
Wow brave man posting this!
@ironhorsehistorian98712 жыл бұрын
You have a son now, congrats :)
@cubekid89772 жыл бұрын
You're so close in reaching 50k subs
@Trainboy112 жыл бұрын
Good work though
@Im_here1702 жыл бұрын
Cool 😎
@jockdouglass38242 жыл бұрын
Dope
@weirdo24662 жыл бұрын
Well,look on the bright side. You can paint it to make it look like a scrapped loco
@paleopotato7362 жыл бұрын
Tip one of Model painting. Thin your paints. Air brushes need a milk like consistency and brush painting needs something a bit thicker. But not too thick as it will leave brush strokes.
@purpleengineproductions57912 жыл бұрын
This guy is a little Speed Demon 5:53
@captain_will.2 жыл бұрын
In Ethiopia strain consist of 5 or 6 cochis double bodies bubbles
@stevenmosco202 жыл бұрын
It looks good sorry about all the crap that happen to you
@TankEngine972 жыл бұрын
Looking good.
@Pumpkinheadguy142 жыл бұрын
you did a great job. high five!
@NewPatek_2 жыл бұрын
Kind of looks like the RWS take on Smudger.
@bigbigarchive2 жыл бұрын
I bet the engine's full name is Horace the Rotten Rodent! *injoke*
@BNSF_1012 жыл бұрын
Nice!
@Conman_572 жыл бұрын
Call him Horace the Unlucky Engine
@jacobhansen7182 жыл бұрын
I hope you graduate college because you’re so smart and you can continue on this amazing project
@FictionalADDON2 жыл бұрын
I think you should try a 009 scale Rusty kit on shapeways.
@mgr_video_productions2 жыл бұрын
This is why I don't work with anything smaller than HO scale. Practice makes perfect. I'm not much of painter. I more to adding and painting details on my models.
@Dreamyyepic2 жыл бұрын
When I was making my first little 009 engine I had no idea what I was doing (and I still don't) but hey at least I finished him for now
@sudrianrailwaystudios6762 жыл бұрын
It looks good so far.
@TheMNrailfan2272 жыл бұрын
This little chassis would be perfect if you ever decide to make a Plymouth or any other little four wheel switcher
@upwellonwards73732 жыл бұрын
ironically i got the same kit but to solve any banana effect im gonna soak my pieces in warm-hot water to soften them before laying them flat to cool and carefully sand whats needed
@Ryder-a-Blaze2 жыл бұрын
Still better than any model I ever made
@chesapeakedproductions30092 жыл бұрын
Well at least you tried make a model
@warragulbogan2 жыл бұрын
It very cool
@MrMemes1782 жыл бұрын
That looks great so far you can soon turn into a full-fledged model railway but I have a question what do u use when you were making the engines of sodor series
@MrMemes1782 жыл бұрын
As in the game
@MrMemes1782 жыл бұрын
U used
@SWATDOMENIC2 жыл бұрын
Pretty good job for ur first time
@imoldsquarewheels6952 жыл бұрын
You're uploading a little than usual this month.
@awesome-xk8vj2 жыл бұрын
If your going to make more trainz videos, and you're going to use Emily in it, can you please give Emily her season 9-12 whistle. Please, it fits her better then her season 7 and CGI Whistles.
@user-ol4un1lq8i2 жыл бұрын
Your supposed to put a acrylic clear coat over the decal paper before you use it
@DocterGeko2 жыл бұрын
Go to Narrow Planet, personally the best Etched custom name and number plate makers out there.
@thatoneguy75312 жыл бұрын
Not gonna lie the flat black mades it look like a hade working engine Like edward thomas most of the black paint peeled of the smoke box
@Bricky_comedian Жыл бұрын
My guy prob should have gotten a rusty rws model,paint it fully black and named him Monty
@Coffee_Rail11122 жыл бұрын
poor Horace cant go one day without getting damaged
@BIG_RED_PRODUCTIONS_official Жыл бұрын
So what if this comment is for this video which came out 10 months prior I do have one question now that Bachman has Peterson are you gonna replace Horace with a new model or are you gonna stick with the normal 1 that you made
@Deadchannel2012-u7g2 жыл бұрын
Wow
@kristalkat79392 жыл бұрын
4:18 Where did you find that Arthur theme?
@mariapaula.55722 жыл бұрын
🙌😁.
@theamazingadventureofeduardo2 жыл бұрын
Let me give you some advice. At the first you don’t succeed, never never give up!
@charimew37452 жыл бұрын
even when you're out of puff
@quarrylocomotiveproduction54392 жыл бұрын
Do you plan on making a model railway series
@tre-engines2 жыл бұрын
Oh dear! 🤣
@timthetrainguy2 ай бұрын
I just use rattle cans of spray paint when I paint trains
@melonkiller28682 жыл бұрын
Ah yes poop stain that has a ring to it
@carstrainsandcrossings86394 ай бұрын
Real 💀
@bobbymckechnie75722 жыл бұрын
I think the funnel was good the whistle was a bit tacky