Tap to unmute

T300 too hot? 20€ fan upgrade guide

  Рет қаралды 12,880

T-one Incident

T-one Incident

Күн бұрын

Пікірлер: 27
@xainte13
@xainte13 2 жыл бұрын
Hoping I don't have an overheating issue and don't have to do this, but I saved your video in case I need to add better cooling! Thank you!
@armilayt
@armilayt 2 жыл бұрын
I like your advice on how to not lose the warranty! Keep it up
@ToneIncident
@ToneIncident 2 жыл бұрын
Yeah better don’t do what I do and keep your warranty 🤣
@armilayt
@armilayt 2 жыл бұрын
@@ToneIncident life hack indeed 😃
@armidittrich1041
@armidittrich1041 2 жыл бұрын
Very informative T one! This is really helpful
@-tom-tronic-
@-tom-tronic- Жыл бұрын
Hey all. First of all thanx for this Video ! I did this Modification because after a Maximum of 2 Rounds on the Nürburgring my T300RS overheated and turned the FFB down alot. After the change to the Noctua Fan i can say this: its absolute Bullcrap!!! I measured the Noise with the old original Fan and with the new Noctua Fan: Result - Exactly the same Noise Level! No difference whatsover. Ordered another Noctua Fan coz i thought maybe its faulty: same Result! And the worst: the Force Feedback Motor overheats same as fast as with the original Fan!!! So save your Time and dont do this Mod. Believe me. At least in my case it didnt make any difference in Noise or Temperature. There must be another way to get this working right… with a second Fan or more and bigger holes in the Top Case of the Wheel.
@ToneIncident
@ToneIncident Жыл бұрын
Do you mean the Nürburgring GP track or the long one? My noise dropped by about 10db (maybe a bit less). My T300RS is about 5 years old, maybe they changed something in between. The FFB performance changed from about 30 min to 60 minutes without any loss of FFB. I am sorry that it didn’t worked out for you and you wasted time and money. Maybe also the ambient temperature plays a big role.
@grixel_3068
@grixel_3068 Жыл бұрын
Turn on the Forced Mode on the T300. Mode + 8 at Same Time. Fan will be always on.
@davyc412
@davyc412 Жыл бұрын
The noctua fan has slightly lower airflow than the stock (17cfm vs 19cfm IIRC) fan which is why you don't see much of a difference. I opened up all of the slotted vents by removing those plastic pieces wbjxh cover about half of each of the slots. I also used a drill to open up all of the fake ventilation holes on the top. It's slightly better than stock becaue it reduces the restriction of airflow into the case. I'm thinking of putting second exhaust fan on the right side of the case. I think that noctua fan comes with all the adaptors to make that possible. There is also a 60mm delta fan on Newegg tjst has about 40cfm of airflow which is like double the stock fan. If I go thst route I may buy a usb to fan header adaptor so you don't need to hook it up to the fan header in the t300 and risk overloading it.
@joost1183
@joost1183 Ай бұрын
I did this upgrade also on my t300. Unfortunately no improvement, i do feel more air flowing through but I also cut the slotted vents, might also be that. It is still overheating which it didnt do 2 years ago (2019 wheelbase). I use boost mode, and I can keep it in use around 45 mins before it needs cooling down. Its a bad motor in essence, next to bad design. I think the motor might be cooked, something is overheating, airflow improved but the ffb fade didnt. I run 45% in ACC, 70% means overheating in 10-15 mins. I tried without boost mode but than the wheel feels dead. 7 more weeks before my upgrade arrives.
@thedude4795
@thedude4795 Жыл бұрын
the standard fan has a CFM rating of about 23.9(?) if i recall correctly, and reaches circa 3800 rpm. The noctua replacement I looked at was only crica 17 cfm and I think spins slower. Its hard to find a fan that can be as quiet as original and with similar CFM but, i noticed users recommending against the noctua one, when i was reasearching........
@vinvinudu77
@vinvinudu77 Жыл бұрын
The original fan CFM is about 13, I don't know where you get that 24 from 🤣
@Mateo6078
@Mateo6078 Жыл бұрын
@@vinvinudu77 www.chiefly-choice.com/fans/uploads/122939245975j0n.pdf - 21,4 CFM
@dubdubdidubadubdub
@dubdubdidubadubdub 2 жыл бұрын
I tried this guide in my Boeing 737 and now it's a B737 Max. Do you have any advice?
@ToneIncident
@ToneIncident 2 жыл бұрын
OMG, better get out of that one. Heard they are not reliable at all!
@kszytok
@kszytok Жыл бұрын
Is this really works? I found my wheel on long tracks softening ffb
@ToneIncident
@ToneIncident Жыл бұрын
I guess it depends, for me it made the issue better. But after one hour of playing I sometimes loose FFB
@DanielFenandes
@DanielFenandes Жыл бұрын
@@ToneIncident How long until you lost FFB power before the upgrade?
@retard8333
@retard8333 Жыл бұрын
@@DanielFenandes for me: Before about 20 minutes After about 60 minutes
@-tom-tronic-
@-tom-tronic- Жыл бұрын
Dont do it. I did. Wasted my Money and my Time. Its the same Noise and same Issue with Temperature! Greetz
@christiandittrich9010
@christiandittrich9010 2 жыл бұрын
I tried this guide in my car and now it wont turn on anymore. Do you have any advice?
@ToneIncident
@ToneIncident 2 жыл бұрын
Hello Mr. Dittrich, have you tried turning it off and on again?
@PixelKhaos
@PixelKhaos Жыл бұрын
Oh wow its incredibly difficult to fin 3pin to 2pin adapters, no longer available or I get the wrong results when looking. What was the issue with the wrong cable you tried?
@ToneIncident
@ToneIncident Жыл бұрын
You're right about that. Unfortunately, the cable is no longer available. At 0:20 you can see that the plastic has different grooves, you can cut this off with a cutter knife (but then you probably have to glue the plug in). Maybe this cable will work: m.de.aliexpress.com/wholesale/3-pin-to-2-pin-adapter-fan.html?catId=0&initiative_id=AS_20230223014053&SearchText=3%20pin%20to%202%20pin%20adapter%20fan&spm=a2g0o.productlist.1000002.0&gatewayAdapt=Pc2Msite
@PixelKhaos
@PixelKhaos Жыл бұрын
@@ToneIncident in the end, I figured since its a pre-owned outside warranty anyhow, to just splice the original fan cable with a noctua adapter for a fanhub setup :) Did find a singular adapter cable locally available as backup though
@FTS_SIMRACING
@FTS_SIMRACING 11 ай бұрын
i did that and end up blowing up the power supply it took a year
Thrustmaster T300 Metal Bearing & Pinion Upgrade Mod
5:52
Sim Pulse
Рет қаралды 64 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Thrustmaster T300 Fan mod with 3D printed airflow guide.
5:08
Kevin Lei
Рет қаралды 1,2 М.
T300RS Fan Replacement - Noctua - No Need for Soldering
1:14
Crovax806
Рет қаралды 3,3 М.
Is the T300RS still worth it in 2023?
10:01
random callsign
Рет қаралды 260 М.
Thrustmaster T300 Fan Replacement Guide
9:52
Cruiser Brah UK
Рет қаралды 3,8 М.
Thrustmaster T300 wheel repair
10:41
madinventions
Рет қаралды 114 М.
Why I'm Returning my Thrustmaster T300 & What I'll be Getting Instead
15:49
The Casual Racing Gamer
Рет қаралды 26 М.
Thrustmaster T3PA Brake MOD That Feels Like T-LCM Brake Pedal
4:04
Sim Racing Pal
Рет қаралды 26 М.
Troca de cooler no Volante Thrustmaster T300RS GT
33:37
Zi Anderson
Рет қаралды 853