T7 Tail Tidy

[@trabftw]

If you take the aluminum sleeves out of the rear seat mount where the bolts go through, turn them over and using the same bolts, bolt them to the frame, you can just pop the seat on and off without ever having to unbolt them again. Cheers.

[@gordonmcdonald8554]

Installed my Camel ADV Tail Tidy. Great video instructions and pieces fit perfect. I am so happy to be rid of those Christmas lights all the crap hanging of the back. I use my T700 20% asphalt and 80 gravel/off-road fire roads, narly quad trails and select single track. It will be so nice not to have the pumpkins dangling from the wires on the back end every time I run gravel or off-road. BravoTeam Camel ADV ! Also, as a dirt rider super happy with the Camel ADV skid plate. I am putting on your clutch assist and brake pads next. Trust me people, I am not an aftermarket junkie. I have been setting up my enduro bikes, mostly KTM for decades. Good quality aftermarket parts are critical when you are riding remote in the Canadian Rockies. Cheers!

[@marinoopen]

The effort and details that go into these videos definitely make me want to do more business with CAMEL

[@odc43054]

Good video overall, and a great product. I really appreciated the quality and finish. A question and some suggestions - You've changed your design since this came out. Now you're including two little white nylon washer to include when mounting the license plate light mount. Where do they go? There is just a sticker on the bag and nothing else to go on. It wasn't apparent to me which side of the mounting stud they go on. I'm guessing under the nuts, but dunno. I didn't even use them, but I guess they must have some benefit. For suggestions - time to update this video. As with the spacers, your product design has changed and you are including the ability to reuse the stock signal lamps. You are also including the tear drop adapter pieces to mount up aftermarket LEDs, which is great. But they are not mentioned anywhere. For wiring the LED tail lights in - the left side is a light color connector and the right side is a black connector. The grounds are the black wire for both. When you are updating your video next, it would be really helpful to have some still shots of each area of the bike that is disassembled with some circles around the fasteners to remove. Also, it would be helpful to have a list of tools needed. Instead of using a T30, I used an 8mm socket on all the little gray screws. I think I used 8mm and 10mm sockets, a 4mm and 5mm allen, and some other miscellaneous hand tools. Oh, and it would also be helpful to let people know about the seat hack where you pull the metal inserts out of the rider seat grommets, flip them upside down, and screw them into place with the button bolts. Makes getting the rider seat on/off immensely easier (the pillion seat locks it down, so it's not loose and flying off)

[@robertlynn2720]

Just finished my install using this video. Overall great product and decent video. Good enough for a non mechanic to complete the work. Couple of notes. I bought the 4x5 oem blinker kit for the t7. I had trouble in 2 areas not covered in the video. 1. When reinstalling the tail light there was wiggle after tightening down. I found plastic washers in my kit and used those. Worked great. 2. I am one of the weirdos that likes the oem blinkers. After install, because the tidy is.much shorter than the oem rear end, i was left with lots of wiring. I zip tied them nearby as best i could. Im not mechanically gifted, even worse with electrical so a little info on what to do with all the extras woild be nice. Overall i am finally happy with the t7 rear end now. Thanks for the vid

[@johnnytenjobs]

Agree that OE indicators are perfectly OK

[@fredburris5428]

@@johnnytenjobs I agree so long as you keep the stock exhaust. For mostly on road some LED bulbs in the stock lenses would be nice and bright.

[@comfortablyunknown700]

I just finished installing the Tail Tidy. A smooth and easy job. Zero issues with the install. Looks awesome.

[@CamelADV]

Thanks for the feedback!

[@selcukcilek555]

Good design. Easy install. Perfect. Well done.

[@CamelADV]

Glad you like it!

[@stevenhill2204]

Thanks for a great vid. I've purchased the same indicator lights that you installed in this project. I was going to replace just the indicators and mod the stock tail assembly; but this changed my mind. With the multitude of fasteners required to complete this job, I would never want to get into all of it more than once. So... It looks like I have to order this tidy, the new flasher unit, and be done with it all in one go

[@fredburris5428]

Well done video, probably easier for Cory Camel ADV to do a video than write instructions. I'm almost finished putting mine on.

[@corriecole4687]

I can’t believe how much better it looks. Very nice

[@skiphalbakken859]

Excellent how to video!. Best looking tail tidy I’ve seen. Job well done 👍

[@Levi_9_eleven]

Just finished mine, thanks for the tips. I can’t believe how difficult Yamaha made that.

[@lefterisbampaidis5446]

Can't believe the number of bolts and separate parts of that thing!

[@jimhatch8731]

Excellent Video and very easy to follow and install. The unit is super well made and looks amazing. Well done Camel! - Jim

[@martin4819]

Great company and great video. Didn’t leave out anything to make me guess. No issues with the tidy and getting my new signals installed - just a lot of stuff to undo but it’s not as bad as it seems. In case anyone was interested I got my signals from 12oClockLabs. These are plug and play and easy to install. You will need to get adapters/bracket for front and back which they also sell. U will need to get the relay…I forget where I got mine but it will hyper flash if just the front is done. It won’t flash at all if u have both and front and rear signals without the relay. The relay is plug and play so easy. Special thanks to Camel ADV. I asked if they could send me some extra stickers which I have adorned on my T7

[@marketzero]

the signal lights you didn't intend on using look pretty good

[@danmorgan8604]

Dated video. The new kit is very different for blinker install. I wish the kit included parts diagrams to show where they go.

[@joeharrison4312]

Looking at changing out the rear end on my t7. I really like the look of this one, however seems like it creates a few extra gaps for mud/water getting up inside, especially when washing under there. Anyone have any issues with this? Thanks

[@davidringel7811]

Easy to install and boy does it look good. Thank you.

[@yorkchris10]

I had a GS that I found had unusally thick plastic and I've seen Triumph tidies and the amount of plastic. They really seem well built for vibration and harness. When I had a dirt bike I took off any number panels that would allow a good grip on the frame when maneuvering. Silicone greased all the exposed connections.

[@patmansadventures.3312]

I got my Camel TT today and there were two plastic washers with the hardware.I don't see them mentioned in this video.Couldn't figure out what they were for.

[@odykas8861]

Hello, great job. I want to ask if we can put the oem led signal lights on the camel adv tail tidy..

[@glynyam487]

Nice job I have led indicators on the tenere 700 rally edition will these fit through the holes okay?

[@simonpope2095]

What LED lights did you order/opt for? Front and back? Love to see a video for the install on the fronts. And thanks for the awesome products and great videos!

[@ChrisPerry-e4n]

The 2023 model comes with the LED lights which I want to keep - anyone have any tips on how to remove them from the plastic bracket?

[@cullennowell7813]

Have you just looked at them? Should answer your question.

[@JebusFinklestein]

Will this work with AltRider rear tail rack? Those 4 bolts underneath will have to go through both these brackets. 4 slightly longer bolts maybe? I would like to buy this tidy if it will work.

[@minds4game]

What if we no longer have the stock license plate light, is there an aftermarket light that will work with this?

[@andrewsoldan6050]

yamaha should hire you man...

[@shawnwollmann]

The 2024 comes with stock led signal lights, how do those fit through the wiring holes? I am reusing them…

[@craigbielsky115]

sounds like a great name for baby wipes

[@JimPowersUSA]

Any chance, with some trimming, that the center pieces that completes the molded in "grips" can be fitted?

[@CamelADV]

It's not anything we looked at. I've attempted to lift the bike a few times with the grips and found them to be pretty ineffective. I know I certainly don't miss them. You may be able to trim and add some longer bolts to make it happen.

[@generallabamba2771]

does this tailtidy work with a high exhaust? the positioning of the turnsignals seems a bit high to work with a high exhaust. I have a 2024 model with the smaller turnsignals. Thanks!

[@comfortablyunknown700]

Looks great!!! Thank you for the video!

[@davehartsock9106]

Excellent how to video. Do you know how much the Camel ADV tail tidy weights?

[@femte9291]

Hi! I installed your tail tidy on my T7 and noticed that it left a few openings/holes underneath, just behind the taillight, where water/mud/dirt can easily get through and under where the wiring & connections are of the blinkers, taillight, numberplate light. After riding like this for a few thousand k’s among which in rain and offroad, I disassembled the seat fairing plastic parts in order to take a look and indeed, there was a lot of sand underneath and around the wiring. I cleaned it and took some ducktape to cover the holes. Is this a known issue or did I do something wrong when assembling your tail tidy? Thank you & best ragards! By the way, the tail does look tidy now but my back is not so tidy anymore…

[@odc43054]

Yeah, there are some gaps. IMHO, nothing is being hurt by a little dirt. I’m not worried about it.

[@reneweisz9157]

Is there a way to change the sparkplugs on the T7 without having to take half of the bike apart? I just watched a video that gave me nightmares about that LOL . Thank you in advance :)

[@ralfabel8657]

Very nice! Is it qualified for German TÜV?What's about the side reflectors?

[@itzFYEB]

i was wandering the same, for Italian regulations it had to have a reflector, i imagine fitting one wouldn't be too complex

[@patricklebon5800]

Bonjour, exportez-vous vers la Belgique ? Quel est dans ce cas le délais de livraison ? Est-il possible de garder les feux clignotant d'origine avec votre Tidy ? Cordialement Patrick

[@skybluetenere]

Bonjour Patrick, you can get Camel ADV Product in three countries around Belgium: France - Ixtem Moto Germany - Bikes Peak Netherlands - Rally-Motor Hope it helps 💙💛🏁🤛🏼

[@samhill3496]

It's strong works way belter than factory

[@scottbdavis12]

Great video! Just ordered this. Also, your skid plate is awsome super happy with it! I know you don’t make handguards but what are the best you’ve seen in the tenere so far?

[@CamelADV]

We use the Highway Dirt Bikes set-up. They are quite stout.

[@joshuagmain]

What rack is that on the back???

[@Patoubody]

If everyone could be this honest about their products...

[@MKlukowski]

That looks great! How much weight did u manage to shave off compared to the original plastic Yamaha had on?

[@michaelhenschel4356]

I have installed the Tail Tidy and I'm a little bit concerned about the open slots now near the rear light where spray water from tires will surely enter. The ugly big OEM tail at least was "sealing" the rear from spray water. Any comments on this?

[@CamelADV]

With or without the factory licence plate/signal light mount, the LED tail light is 100% sealed on it's own.

[@michaelhenschel4356]

@@CamelADV Sorry, I didn't explain correctly I suppose. I wasn't talking about the tail light itself. I was rather talking about the whole rear. There are left and right gaps near the tail light that are open because the Tail Tidy doesn't cover the gaps like the OEM tail does.

[@MrPreles]

Nice product! I’ll be ordering one once my bike arrives. Who makes that rear rack?

[@_Lebowski_]

Yes, please! Somebody let us know!

[@lexaket]

Great things. Can you tell me how tall are you? My height is 175 cm and I can't understand is it bike goo for me or not. Thanks.

[@martin4819]

I’m 182 cm and can easily get the balls of my feet down but can’t flat foot the bike. You would probably be on your tip toes which would make it tough to walk the bike while seated. Honestly, u get used to the height pretty quick and adjust things accordingly. I think u are still tall enough that u could get a foot down without leaning the bike over too much if u had to. They have a lowering kit but of course u will lose some suspension travel.

[@JG__12]

Hey Cory, do you know about the T7 Rally kit to join both parts of the seat? You might find it useful, cause the oem system truly sucks. Nice vid btw!!

[@CamelADV]

I have the one piece rally seat, it works well. It seems strange they didn't use the same seat pan for the low, regular, and tall seat.

[@oic1968]

I just did the Auz hose hack cost $2, works great with stock seat no more need for those screws.

[@JG__12]

@@CamelADV Yeah, definitely

[@JG__12]

@@oic1968 Could you please send a link or explain the hack? Really have no idea what you are talking about

[@skybluetenere]

@@JG__12 just search for 'Tenere 700 seat hack' and you'll find it 💙💛🏁🤛🏼

[@janmikoaj3122]

What was a reason of this modification? Looks better it's a fact, but something else? :) Some technician aspects?

[@CamelADV]

Aesthetics mostly, durability too. The stock set-up is a lot of plastic and can be damaged quite easily.

[@goatman86]

Damn! There's like 2kg of just bolts in the OEM tail.

[@zardportugal]

Beautiful.

[@grego10r]

can i use orginal turn signals? with it >>

[@alexmckenzie1063]

Nope :(

[@patmansadventures.3312]

@@alexmckenzie1063 I guess I'll keep looking.Factory TS's are a must.

[@robertlynn2720]

@@patmansadventures.3312 they make the oem light tail tidy. Im installing now

[@patmansadventures.3312]

@@robertlynn2720 Where do i get one?

[@robertlynn2720]

@@patmansadventures.3312 camel-adv.com/collections/yamaha/products/yamaha-700-tenere-t7-tail-tidy

[@gbner9991]

personally I don't like the exposed cables of most of these aftermarket holders

[@lifeexpert3053]

To much Bolts 😄 good job👍

[@CamelADV]

Lots of bolts but I'll take that over fragile plastic tabs any day!

[@ernieschatz3783]

What's wrong with the Starship Enterprise? I'll keep the functionality and sacrfice the coolness factor. How will I ever live with it? 😂😅

[@azlong4596]

Somebody got a new scooter.

[@CamelADV]

Yeah, my Canadian T7 arrived. I was hoping to get one in the second wave of bikes that are arriving as I already have the Euro-spec bike. That would have given someone else an opportunity to get a bike and would have given me a bit more room in my already undersized shop. My dealer said they expected the second wave in early August but they weren't absolutely confident in that so they strongly suggested that I take it now so I risk being T7-less when I have to crush the Euro bike. It worked out well as they ended up having a spare red and white after someone else cancelled their pre-order.

[@azlong4596]

@@CamelADV I meant to ask you about the crush factor, can't that bike be used as a off road only vehicle or is there a Canadian law prohibition of ownership of some kind.

[@randycallow3736]

Good video

[@legghorn]

Oh! Now you got a canadian bike?

[@CamelADV]

Yup, it showed up the other day.

[@joseaguirre7517]

Wow!! Where is the diference! Betwin this "canadian" and the rest of TENERE 700 in the rest of the world?

[@CamelADV]

@@joseaguirre7517 It appears to just be different signal lights and the red paint on the "Competition White" bike is a different shade.

[@legghorn]

@@joseaguirre7517 At least the euro version nicer indicators ;-)

[@ZaferOnurlu]

Hi, where did you order your tail tidy 😊

[@AJourneyOfYourSoul]

For a budget bike, Yamaha sure made it overly complicated. No big deal, off it goes.

[@CamelADV]

There are definitely a few things that could have been simpler.

[@leewalker2221]

The entire back end of the T7 looks terrible in general but you've done a good job here. Wished it had the old 660 rear on it.

[@19Taylor79]

This Numberplatelight, seriously?

[@toddabbott3605]

Will your tail tidy work with the OEM luggage rack?

[@CamelADV]

Yes, it definitely does!

[@southpaw6167]

Nice

[@Lonestar19d]

Very nice. Now make one for your real bike - the 790!

[@CamelADV]

The 790 tail is already pretty clean from the factory. I don't think it needs a chop. Rottweiler has one if you're looking.

[@Lonestar19d]

@@CamelADV Thanks. Very cool of you to share the love with another vendor.

[@ОлегЧупрун-ь6ы]

Мот красивий, а станок возле стени ищї шикарней.Україна.

[@robsonenduro3316]

WTF yamaha still using bulbs...

[@justgjt]

$17 690 AUD budjety bike . . . . lol !

[@magilla2567]

Can get em for $15 800 AUD if u know where to look.

[@T7-RALLY]

Does this kit still work for the 2024 Tenere