Table from a Basketball Floor (Bell Centre)

[@JackmanWorks]

My incredible sponsors are the reason I'm able to spend so much time on my videos. Please support them by clicking on the links below: 𝐌𝐢𝐧𝐰𝐚𝐱 check out their amazing stains that open possibilities for new finishing options ► Pre-Stain Wood Conditioner low.es/3A1rGN7 ► Water-Based Semi-Transparent Stain (Vintage Orange) low.es/3A1CNWz ► Water-Based Semi-Transparent Stain (Antique Jade) low.es/3bBugjG 𝐈𝐧𝐯𝐞𝐧𝐭𝐚𝐛𝐥𝐞𝐬 ► X-Carve Pro CNC bit.ly/3BLz3tE ► Easel Pro CNC Software bit.ly/3QpN9Vk 𝐓𝐨𝐭𝐚𝐥𝐁𝐨𝐚𝐭 (code "Jackman15" gets you 15% off) ► High Performance Epoxy bit.ly/3JC7x3i ► TotalTint bit.ly/3JzunZy ► Wood Sealer Varnish Primer bit.ly/3oUHhrH ► Halcyon Clear Varnish (gloss & satin) bit.ly/3dadysa 𝐈𝐒𝐎𝐭𝐮𝐧𝐞𝐬 (coupon code "Jackman10" gets you 10% off) ► Hearing protection AND Bluetooth headphones bit.ly/3bCNRQv Styles shown in this video: LINK 2.0, LINK Aware, AIR DEFENDER, FREE Aware

[@jeremyspecce]

I’m pretty impressed that you are able to do one video with 2 different sponsors that seem like sort of competitors but you were able to seamlessly incorporate both of them into the project in concert with each other.

[@jipptou]

Total surprise. I watch "Sous écoute" podcast often and my favorite woodcraft man is doing Mike's table. Great job!

[@JackmanWorks]

Wow, thank you!

[@tharemyhopkins5873]

Clamps disappearing? For sure. Multiple Pauls/Pats on screen? Easy to handle. But the opposite planer feed at 3:00 broke me! You're still full of surprises, Jackman, thank you for the massive creativity in your edits!

[@PinoyDDragon]

Next project, some kind of pully system/elevator to bring stuff from 1st floor to workshop! Love seeing yall work together. Fav duo.

[@DarkDioStudio]

Agreed. I’m surprised he hasn’t done that yet 🤔

[@JackmanWorks]

Totally!! It's been on the to-do list for 2 years, ever since I moved in 😂. I have some fun ideas though, and will definitely make a video about it. I'll be using that basketball flooring to floor the barn, so I'll definitely figure out something before I have to bring all of that upstairs!!

[@jeremyspecce]

Yeah, I know Jay Bates did sort of an elevator in tracks and I personally have a cable hoisted lift to my attic that I built. I’d love to see the Jackman version of this.

[@uniballoutlaw]

this world needs more people like Jackman and Pat

[@JackmanWorks]

I don't know if the world could handle more of me, but it definitely needs more of Pat

[@TotalBoat]

We are ALWAYS in for a treat when you guys get together!! This project was so fun and turned out awesome!

[@JackmanWorks]

Merci beaucoup

[@PatLap]

🥰👍🏼

[@thorstenhulser5008]

Yeah, the funniest two on the whole internet are back again. I really love your collaborations.

[@AttackShepherd]

Great set of guys working together....

[@JackmanWorks]

We make a good team, I guess

[@HovingtonInstruments]

Great table, I love Mike Ward🙌 Great job guys

[@JackmanWorks]

Thanks!!

[@sgsax]

You two are my favorite crime fighting duo. Table looks amazing! Hope they gave you a shout out at the event. Thanks for sharing! Now to go watch Pat's version.

[@JackmanWorks]

I hope so too! I was there but couldn't understand any of it hahaha

[@sgsax]

@@JackmanWorks Only French I have is from high school, which is a looooong time ago. And Quebequois is even different from that. I've told Pat I wish I understood it better, that I miss half (or more) of his jokes. 😂

[@justindesilets3526]

as a Quebecois and a guy living near Montreal, I really appreciate this built!

[@woodworksbygrampies1284]

Hola! 🖐You and Pat did a great job and the table looks great. I hope you got a mention on the Podcast. Your Netflix series introduced me to Pat and it was great to see you both work on this one. Awesome video, great job.👏Take care and have a good one, Adios! 👊

[@TheGrantAlexander]

Always interesting to see two people take the same footage and make videos! Great job guys

[@Toupetisonfire]

Awesome project can't believe you got to make it for one of my favorite comedian

[@JackmanWorks]

It was such a cool opportunity, Mike is a great dude!

[@lindacsmith13]

I love those minwax colors - beautiful table

[@JackmanWorks]

Thanks!!

[@TheRPhelps24]

You've introduced me to Making Fun! Just watched the first episode and it's a hoot! As for the KZbin, Pat and you have great chemistry! The faces lol

[@JackmanWorks]

Thank you!! Glad you enjoyed :)

[@AndrewSzeto]

GREEN SCREEN FOR THE WIN! LOVE IT PAUL! LOVE YOU TOO OF COURSE LE PAT!

[@Little_Red_Riding_Hoodlum]

When Pat said, "Bell Centre" I was hearing, "Belt Sander". 😏

[@JackmanWorks]

haha!

[@WilhelmScreamer]

Gorgeous product, fun to see you working with other people

[@JackmanWorks]

Thanks!! Pat makes for a good partner

[@prodbybadboy5301]

This table is super super cool….. great work guys🎉….. I can always count on inspiration for another project because of u guys🙏🏽🔥

[@JackmanWorks]

Thanks so much 😊

[@laroseauxboisrosewoodwoodw8585]

Wow Mike ward i know him , well not personally , but as an comedian . I live neer Montreal actually thx for this build and share 👍🏼🇨🇦🥰

[@MichaelAlm]

How have you waited this long to get a green screen?

[@davebauerart]

Nice work! The color stains are cool. I’ll have to check those out.

[@JackmanWorks]

They're great, adds a lot of options to the finish

[@williamellis8993]

Great table, Paul. Looks like you had a lot of fun doing it. Isn't that what woodworking is all about? Bill

[@JackmanWorks]

If you're not having fun, there's no reason to be doing it!

[@HerrBlei]

Moin. Excellent video. Funny to see the differences between your videos.

[@MinwaxUSA]

Dream team 😎

[@JackmanWorks]

Oui oui! 😀

[@PatLap]

I agree! 🥰👍🏼

[@ay4u1]

This was so good! Also that colored stain 👀I have a side table that I have been trying to repair ( I am not a wood worker ) but I think with that I finally have an idea of how to finish it: Rainbow gradient 🌈

[@mdlmickysdigitallab6499]

WOW, beautiful project, I will try to copy... BRAVISSIMI e simpaticissimi! Micky

[@JackmanWorks]

Please do!

[@JkCanvas]

When cutting out the letters it looked like one tool path was with the an compression bit then followed up with a 60 degree vbit to freshen up the inside corners? Did I see that correctly?

[@JackmanWorks]

Correct! It was an 1/8" compression bit doing the bulk of the cutting and then the 60 vbit to hit all the corners

[@JkCanvas]

@@JackmanWorks thank you for the feedback.

[@danielvasileioicaliuc8332]

Love your videos man!!

[@sumosprojects]

Magic still happens #legends 🍻👍

[@deanbaker3418]

Ooo this video has two DIFFERENT bearded men in it.

[@JackmanWorks]

I didn't even have to clone myself if I didn't want to!

[@deanbaker3418]

Great work btw! Thank you!

[@SMPLHobbies]

This is awesome! I've tried to stain wood/epoxy combos before and it's always ruined the epoxy by staining it. I do use the same total boat epoxy you use in this video. Did you just lightly sand after applying the stain to the wood to removed the stain on the epoxy? Thanks!

[@JackmanWorks]

Luckily the water based stain is a lot thicker than the oil based (I haven't tried this trick with the oil stuff) so it's easier to mask off section and also easier to clean up any spillover later (you can see us doing that at 10:08), so scraping it up with a really sharp blade was our solution for that

[@SMPLHobbies]

@@JackmanWorks Awesome. I'll definitely check out this stain.

[@PatLap]

FRIENDS!!! 👋🏼🌈👋🏼

[@woodworksbygrampies1284]

On my way to watch your video next! 👍

[@JackmanWorks]

👋🏼🌈👋🏼

[@thomashays7818]

I bet that took just shy of a century to carve on the CNC, lol. Good job 👍

[@jeffforbes3772]

Wow I was wrong...I thought you were brothers. Who else would let you draw a smiley face on his gut?

[@cswatson4823]

When you were pouring the glue and the camera was raising up to your face you should have said. Oh la la Nice table. Friends!

[@fishindude72]

Hey Jackman I've been following channel for years it's always entertaining and inspiring. I wanted your opinion about that planer. I've been holding off but I want to move on and get one. I really thought I wanted the DW734 I see you have the DW735. its a big purchase for me and I struggle with making the dissensions. I probably cant go wrong with either one though. Anyone here can throw your opinion it would help.

[@warrenwerks]

Although I haven’t used the 734, I have the 735 and have been really happy with it. I think it’s a more rugged design and has a few extra features. Personally I think it’s worth it for the 735, but you’d probably be happy with either one

[@BlueZaddy]

Your shirt ain’t seen on my tv

[@Syrkyth]

You've got to make a little (or big) dumb waiter to get material up (or down) to the shop easier. I wonder what a giant wood basketball would look-like? Or a bowling ball? (huh, apparently that's what they were made out of originally - though lignum vitae was the preferred material - yikes).

[@murmeli2395]

Do you scab metal those nails? Might get some money from them.

[@mjdthemaker7574]

You two should always work together!

[@86abaile]

Why blur out the "As seen on TV" shirt?

[@JackmanWorks]

Trademark stuff apparently, idk, it wasn't up to me lol

[@martypingel5423]

There's a real bromance happening right in front of us

[@tomahoks]

I always read it as Mike Weird. 🤷🏼

[@jeremyspecce]

I agree, the A in that logo is a little tricky.

[@кимченир-й9х]

Jackman...что то ты поправился ,но твои видео как всегда лучшие !!!!

[@jonathangrenier104]

as blurry seen on youtube

[@simonr6793]

Really disappointed 😞 I thought wow here comes track number 2 of their upcoming dad's record album 😢. It turned out nice mother ! As always guy's 💯% 👍 🇬🇧.

[@willboudreau1187]

Let's home this guy believes in "Trudeau must go."

[@TheHandystanley]

Soooo, let me get this straight. While you two play all day and night - your wives work. Do I have this straight? You guys area great...especially the guy from the land of maple syrup.

[@Texburrito03]

Seems to me that you need to build some type of ridiculous elevator to bring in wood... 🤔

[@flutter1woodcraft]

First… :-)

[@JackmanWorks]

Second!

[@flutter1woodcraft]

@@JackmanWorks Lol! Great video, you both made it looks so easy even though it is a boatload of work!

[@spbmade]

Кто, интересно им сказал что такое е6анутейшее кривляние - это смешно или оригинально или просто ок? Или это новый гей тренд такой?

[@andysaunders9720]

Just hate that this video was only possible by the support of Minwax my arse. Unsubscribe

[@JackmanWorks]

Huh? 😂😂

[@jeremyspecce]

He prefers MAX wax my ass.