Table Saw Mobile Base | With Outfeed and Dust Collection - 14

[@robertlego9335]

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

[@Mike-wx2vv]

Just got the 7485 saw and I'm currently building this by rewinding, fast forwarding and pausing 8000 times. So far it looks great with a few tweaks. Love the detail man.

[@jonesworksshop]

Thats awesome to hear! I hope it turns out great and Id love to see it when its done!

[@tonydewberry3633]

Nice. Really liked the honesty of the "measure once" scene.

[@jonesworksshop]

Thank you! Definitely should have double checked that one.

[@Kokoras1980]

Very good job, my friend, well done, I liked Greece, Florina, Western Macedonia🇬🇷👍🌹

[@jonesworksshop]

Thank you so much!

[@Kokoras1980]

@@jonesworksshop Everyone says it's very simple but for us amateurs it's a bit difficult I want to do a similar one and the phase is what I have all the tools and I don't do anything.🇬🇷👍

[@jonesworksshop]

@@Kokoras1980 I totally get that. Im definitely not a pro. I think all you can do is get in the shop and start building and thats how we all get better. The more you build the more comfortable you get. Tomorrow I am releasing a new video and its a more in depth how to video on this table saw stand. Check it out and I hope it helps,

[@DIYAudioGuy]

That thing is sturdy.

[@jonesworksshop]

I like a really beefy heavy work table

[@dinoleupoldvonlowenthal349]

best music for a woodworking video I ever heard so far and great work as well

[@jonesworksshop]

Wow, thanks!

[@GNU_Linux_for_good]

Ha, ha.. I fancy two really big loudspeaker walls, the open garage, and *that* song played with 10'000 watts, just to drive the whole neighborhood insane. *Great* 08:50 *Damn it* , Jones - you considered everything!

[@jonesworksshop]

I tried to anyway! I love your syle!

[@ebabula27]

I have been looking at photos and videos of these out feed tables for the dewalt saw and this one is by far my favorite one, I think I made up my mind and will be building on just like this.

[@jonesworksshop]

I really appreciate the compliment! Have fun building!

[@blackmangopit]

is there a reason the outfeed table is higher than the saw top? I always thought they should be flush

[@jonesworksshop]

@@blackmangopit The out feed side is higher but you shim your saw to be flush with it. I made the outfeed side taller so If I ever need to switch to a new saw it would still fit.

[@diywoodworking7490]

Nice, I made mobile liftable workbench with DEWALT DW745 and DW735 today!

[@jonesworksshop]

Very nice! I see you have a video. Ill check it out!

[@ChulaChingonaCabrona]

I was woodworking while watching your videos and then this one came one and that song made me feel like a total badass with my t square lol

[@jonesworksshop]

Haha! Thats awesome!

[@MondoRockable]

That thing looks as solid as a rock. Nice work.

[@jonesworksshop]

Thank you so much!

[@richcolter3122]

Well Done! Time to upgrade my current workbench.

[@jonesworksshop]

Thank you so much! Have fun building!

[@KyleLasVegas1]

Very nice work, obviously not your first project but I could not believe you did all that cutting with no eye protection.

[@jonesworksshop]

I'm better about wearing it now. Breaking old habits

[@XaltLures]

Fantastic Dewalt table saw stand! I wish you were my brother in law. Thanks a lot for the schot!🤝

[@jonesworksshop]

Haha Thank you so much!

[@davidj1436]

Love the design. Don’t forget to protect your eyes and ears. Want you to be able to listen to awesome music while you work when you are older!

[@jonesworksshop]

Thank you! I'm alot better about protecting myself since making that video. Definitely had some bad habits.

[@davidmorgan1547]

Great video. Nice build. Love the music. Thanks 👍

[@jonesworksshop]

Thank you!

[@dianeernest1660]

I like your plans . I just got a new Dewalt saw.

[@jonesworksshop]

Thank you so much! That's awesome! I love the Dewalt table saws, I hope you enjoy it

[@sunnyjin9566]

The highlight is headclamp. Hahaha

[@darrellpatton4008]

I loved "Head Clamp".

[@jonesworksshop]

Comes in handy!

[@smoleyhokes]

Great video. Just what I needed to make my saw more useable. Where'd you find those cord wraps? Not sure I'm up on the music. But, I'm old. I like classic country.

[@jonesworksshop]

Thank you! I actually just 3d printed those cord wraps but I think they could be made easily with a couple of short dowels

[@davehillsden]

glad you're enjoying your new Milwaukee tools! go team Green!!!!!!!

[@narkaras]

I want one of this table saw stand ❤👍

[@vstm3950]

Nice design and fun to watch, thans for sharing bro. Cheers from Poland

[@Tod_Unctious]

Very nice bench, thanks for sharing.👏👍

[@TheAdamPoole]

I like the use of the head clamp.

[@jonesworksshop]

It comes in handy!

[@fabiomerlin8820]

Cool setup. Thanks for the video.

[@danholzer4626]

love the build and the music!

[@charlessmith6636]

Love this build I just bought the same saw and have been racking my brain on a stand well love to say I just started build mine almost like yours but a lilttle bigger and 3drawers thank you so much

[@jonesworksshop]

Thats awesome! Enjoy building!

[@freddysosa8921]

Thank you for the video. It came out really nice

[@jonesworksshop]

Glad you liked it! Thank you

[@michaelh.7040]

Amazing plan, great job. 👏👏👏👏

[@jonesworksshop]

Thank you! I appreciate it!

[@GeorgeGladden]

Very nice ... So many dang clamps. Keep up the good work, man.

[@jonesworksshop]

I appreciate it man!

[@chrisodriscoll5095]

awesome video ! Thanks for this. I want to build one myself now.

[@jonesworksshop]

If you do id love to see it!

[@thomaschandler4831]

Nice work brother..... and I love your music selection.... sure would like if you put some measurements with your videos ..... longer videos are nice ...... it's good to get your input on your thought process .... I look forward to your next build .

[@jonesworksshop]

I appreciate the feedback. As I get better and more comfortable with making videos Ill definitely do that.

[@GNU_Linux_for_good]

Pretty darn awesome.

[@jonesworksshop]

Thank you!

[@protestgoogle3471]

Love the outfeed table, been looking for a best in class design to fit my space. This may work. But wow, great choice in music. Went straight to my music provider and added Royal Deluxe to my playlist. Thanks for that recommendation.

[@jonesworksshop]

They are definitely one of my favorites! I hope it fits your space perfectly, enjoy building!

[@mprumsey]

Nice work. Thank You for sharing

[@jonesworksshop]

Thank you so much!

[@rameshkana2107]

Good build. Good mucis. Just about to start similar project for the same table saw. Looking forward to seeing more builds.

[@jonesworksshop]

Thank you so much!

[@voodoodaddy915]

Very impressive, in my Top 5 of all the table saw ideas I've seen, well done.

[@jonesworksshop]

Thank you so much! I really appreciate that!

[@Makerdude23]

Really nice job!

[@jonesworksshop]

Thank you!

[@jaraxel888]

Thank you for the video, this is virtually what I want to build for myself!

[@chaselesser3191]

This is a nice compact size table. Most I see are huge and have to have a big garage to get some use out off.

[@jonesworksshop]

That was definitely my problem with my last saw. It was big and wide so I downdgraded to this but It fits my work flow much better.

[@calcioevita5]

@@jonesworksshop Awesome man! This is the issue i'm having. I have an older Ridgid ts3650 with full cast top but i feel its just to big for the space. I was looking at the 7491 from Dewalt. Is that the table you have? its one of the bigger job site saws and i like the idea of an accurate Rack and Pinion fence. Cheers, Matt

[@jonesworksshop]

@@calcioevita5 Thats exactly the same saw I had before and yes, this saw is the 7491. My saw is actually the 7490. Its the exact same saw just without the mobile base. I love it because its compact but has a large capacity. It takes up so much less space but It has all the capacity I need.

[@craighatch3221]

Thanks for the ideas, you have great taste in power tools.

[@jonesworksshop]

Thank you so much!

[@TheHarly]

Wow..nice base my friend 👍👍

[@jonesworksshop]

Thank you!

[@shanta818]

Thank you this is an awesome video, no bs no fluff easy to follow...keep it up bud great job

[@jonesworksshop]

Thank you very much!

[@samh9072]

Nice work!!

[@lukejasso1183]

Nice work, very functional

[@jonesworksshop]

Thank you very much!

[@davidmorgan1547]

Royal Deluxe - loving it - cheers buddy 🎵

[@jonesworksshop]

One of my favorites!

[@as7river]

Every beginner video I watched prior to setting up my home shop insisted that a 12-inch miter saw was overkill, and so I got a 10-inch. But darn if I don't want a 12-inch after watching this.

[@jonesworksshop]

Im definitely a fan of the capacity

[@collinstebbins2598]

Very nice! Exactly what I was looking for for my 745. Thank you!

[@jonesworksshop]

Absolutely! Have fun building!

[@MrChewy63]

Nice job Jonesy

[@1966apc]

Good work.

[@jonesworksshop]

Thank you! Cheers!

[@AdamsLeatherWorks]

Great project, fun edit, loved the music!

[@jonesworksshop]

Thank you!

[@ChikaVadik]

"Head clamp," I loved that.

[@jonesworksshop]

Hah Thank you!

[@tnkntx]

Very nice build.

[@ralphlivingston894]

First time I stopped by your channel… Great job! (I’ve been looking for an out feed table for my table-saw.)

[@jonesworksshop]

Thank you so much! If you build one I'd love to see it

[@XAnonymousGuyX1]

The only thing I would have done different, is ditch the middle casters to make it easier to push against a wall, especially in tight spaces. Other than that, fantastic job and I'm jealous. Haha!

[@jonesworksshop]

You definitely could do that. I personally never push it against the wall and the additional casters help me roll over my crazy uneven floor.

[@XAnonymousGuyX1]

@@jonesworksshop I get that. I just like having tools I'm not currently using pushed out of the way. It's just how I work and I keep buying more and more tools and my work space doesn't grow for some odd reason. If the center casters are for you, more power to you. Like I said, it's just the only thing I'd change, if I were building this same thing. It's excellently built, I tip my hat to you.

[@danmaciosekmaciosek6166]

Like the head clamp

[@jonesworksshop]

Its cheap and effective!

[@beatsntoons]

Top stuff. Great result, that looks like loads of fun to build.

[@jonesworksshop]

Thank you! I loved building it!

[@joewelling3278]

Nice job, I have been pondering building a mobile base for my Dewalt job site table saw. I have used the head clamp method numerous times as well

[@jonesworksshop]

It comes in handy all the time!

[@Theinc0gnit0]

lol, measure once, cut twice. This is the first video i watched of your channel and that part made me subscribe immediately. Great design btw!

[@jonesworksshop]

Thank you so much! I'm glad you enjoyed it!

[@zupp.social]

I saw your neighbor closing their garage, they don't like the noise lol 🤣

[@jonesworksshop]

You are right about that lol

[@woodprojectswithalex2692]

wow!! Simple, Strong, Beautiful and Usable! Thanks for sharing that with us!

[@jonesworksshop]

Thank you so much! Very kind, Im glad you enjoyed it!

[@tro8191]

Kick a** music! Kick a** build! Great job! Head clamps rule bro... I use em often myself lol!!!👍

[@jonesworksshop]

They come in handy for sure! Thank you so much!

[@pauldejesus9644]

nice work great music

[@jonesworksshop]

Thank you!

[@justinmackey2912]

Nice build

[@jonesworksshop]

Thank you!

[@ecaff9515]

Great job and video. Thank you for sharing. Volume of background music was distracting from your good work. I like that head clamp...

[@jonesworksshop]

I appreciate the feedback and thanks for the compliments

[@sasukekun1416325]

I've watched this a few extra times because I liked the music so much. Devices also have volume controls. 😜 I'll be building this today except I'm going to pivot the whole thing so I get a table top extension on the left instead of an outfeed on the back. Planning to roll this over to my main bench and use that as the outfeed. Thanks for the great video and cut list.

[@alx9064]

Nice work ! very neat !

[@jonesworksshop]

Thank you so much!

[@downtownbicycle]

Great project loved it thank you for sharing..

[@jonesworksshop]

Thank you, and thank you for watching!

[@grahamlumsden8471]

The saw must be a Dewalt DWE 7491. The 745 and 7480 will not allow a dado blade. Nice work, help me with a plan for mine.

[@jonesworksshop]

You are correct! This is actually the DWE7490X which is exactly the same saw but this one came with a scissor stand instead of the mobile base.

[@dgb5820]

Looks really nice

[@jonesworksshop]

Thank you!

[@gnt256]

nice table bro. when you make something like this you should have printable plans to sell. i sure would buy one

[@jonesworksshop]

I appreciate that and also the feedback. Ill work on teaching myself how to make plans and look to do that in the future.

[@ΓΕΡΑΣΙΜΟΣΣΤΡΑΓΓΑΣ]

Great video useful project , your head clamp was one of the best jokes i have ever seen at woodworking video's

[@jonesworksshop]

Thank you so much! Im glad you enjoyed it!

[@davidtyers4903]

That's well thought out. Quality.

[@jonesworksshop]

I appreciate it, Thank you

[@outdoornut]

Very nice design! Very nice video! & also very nice choice of music!!!! :-)

[@jonesworksshop]

Thank you so much! I appreciate that

[@Juh812]

Awesome job! I just picked up the same saw for my shop.

[@jonesworksshop]

Thank you! I love the saw, I hope you enjoy yours

[@DIYDREW]

Really great job! I built something similar for my shop. Only difference is I am making it a more all-in-one situation rather than just for a table saw. Just subscribed and look forward to more!

[@narrowjay0]

Very nice

[@jonesworksshop]

Thank you!

[@enricopanate7964]

Good job bro!

[@jonesworksshop]

Thank you!

[@46bovine]

Stupid me! I went to the show more tab and I answered my dumb question. Thanks, Jones.

[@jonesworksshop]

No problem and thanks! I'm glad you enjoyed it

[@johningenito3841]

Awesome job! Don't forget the eye protection!

[@jonesworksshop]

I definitely need to get into that habit. Thank you

[@michaelpaslawski6678]

can you recommend a shop vac hose adapter for the table saw top dust port (the blue one in your video)

[@iamMarkCole]

yes please! looking for insight here...

[@iamMarkCole]

a y adapter as well?

[@jonesworksshop]

No problem! These are the ones I like www.rockler.com/dust-right-mountable-dust-coupler

[@xisten]

nice job!

[@jonesworksshop]

Thanks!

[@ronaldwayne6159]

Great job though. Perfect for one car garage workshop.

[@jonesworksshop]

Thank you!

[@helmighomestead2976]

awesome job bud! Need to build one myself!

[@jonesworksshop]

Thank you! If you do id love to see it when you're done!

[@scottsprowl7484]

Looks great. I'm building it!

[@jonesworksshop]

Have fun! Id love to see how it turns out

[@buba2isatosa]

After that shop vac mistake I would start compleatly over and do it right! I'll give $6.00 for that completly unusable one you finished🤣 just kidding great video great build and I'm completely jealous of all your toys/tools

[@jonesworksshop]

Deal! Hah

[@Tustinman]

Hello, awesome video. I just bought a Dewalt 7485, will fit this table?

[@jonesworksshop]

Yes it will. That saw is a little smaller so you would just need to shim it up a bit.

[@NomadMakes]

Nice build. I have the 7485 and also have it on a mobile base. Cool vid, I especially liked the head clamp :D You have a new sub ;-) Cheers.

[@jonesworksshop]

Thank you! I really appreciate it! That head clamp comes in handy

[@lebirdking]

What was the electrical box? Is there a link? Thanks for the video. It looks like a sturdy one.

[@johnmusgrave3179]

My hat off to you sir! A thoroughly enjoyable video but I may put a router table in the outfeed area. I have a small shop and everything needs to be flexible. Btw, I liked that headclamp!!

[@jonesworksshop]

Its funny that you mention a router table. This coming week I'll be uploading part 2 of my new table saw stand that I've been working on and it hassince added features like a router lift. Great minds think alike and can also be used as clamps!

[@juanbetancourt2802]

Excellent!!

[@annaqueen2504]

This could be my favorite video yet♡♡

[@jonesworksshop]

Thank you so much! I really loved this project!

[@kerrybradenjr.8622]

I just bought the plans. Will they work with my Dewalt DWE7485? Or will I need to change some dimensions?

[@CarolinaGirlCreationZ]

First off, your music is kick ass. Secondly, I love how much you use wood glue! It is a must to me in woodworking. Third, can you pretty please put out a more real time version of this with commentary and measurements? I have this saw and haven't even used it because the stand it came with is scary to me when I need to cut 2"x12"x8' boards. Excellent video. New sub to a new-"ish" KZbinr! Can't wait to see what else you do. :)

[@jonesworksshop]

I really appreciate that! I can definitely work on making a more detailed version.

[@CarolinaGirlCreationZ]

@@jonesworksshop that would be sooooo awesome! Thank you so much! :)

[@bobso7638]

super cool !!!

[@Turk380]

Tidy! I have the same model Dewalt saw (but the version that comes on the folding roll chassis) but have been pondering a table project like this for it. I already have a separate cart I built as a dust collection & assembly table with an iVac relay.. So I guess I could make my saw cart to end up the some height and it would also function as an outfeed table. Storage is a must as well.

[@jonesworksshop]

Thats awesome! I love this saw and I think that iVac relay is a must! I just built the first part of the MkII version and Im planning on adding several things like a router lift in the outfeed table. I think in any small shop the more versatile a tool is the better off youll be

[@Turk380]

@@jonesworksshop yeah I've been happy with it.. have used a dado stack and done box jointing and French Cleats.. need to make some zero-clearance throat plates still... my only quibble would be that I wish the angle adjustment was on a cog track like the fence.. setting an accurate bevel is really fussy. A router lift sounds awesome! That's on my list too.. If you want to check out my dust collection cart it's on IG @turk.380

[@jonesworksshop]

@@Turk380 I definitely want to make some zero clearance throat plates also. My only complaint is the dust collection under the saw. It seems like there is a mountian of sawdust under the saw every time I use it. Im planning on fixing that too. Ill definitely check it out!

[@Litehamer]

Love this video Love this music Love your work. Total newbie and am useless with wood work. Would pay for this plan Great word . Thank you

[@jonesworksshop]

Thank you very much! I really appreciate that!

[@adamvan101]

I love the editing! Great format, keep it up :)

[@jonesworksshop]

Thank you!

[@Muhsinah.Nadeem]

Do you show how to make the miter saw table as well?