table saw sled/table saw upgrades/테이블 톱 확장 썰매 /망치소리

It is a table saw extension sled that can easily cut even long trees.
It is especially convenient and accurate when cutting multiple long trees.
"Woodworking tools are finished in the hands of a carpenter."
긴 나무도 쉽게 재단 할수 있는 테이블 톱 확장 썰매입니다.
여러개의 긴 나무를 재단할때 특히 편하고 정확합니다.
"목공 공구는 목수의 손에서 완성 된다."
인스타 그램: / wood.no1
홈 페이지 : hammersound.modoo.at/

[@망치소리HammerSound]

재 업로드 영상입니다. 6:47초에 쏘스탑 사고영상/주의 사항등이 있습니다. 혹시 따라만드실 분은 같은 실수 없으시길바랍니다. 꼭 확인하시기 바랍니다. This is a re-uploaded video. At 6:47 seconds, there is a saw-stop accident video/cautions. If you are going to follow along, please do not make the same mistake. Please check.

[@jangpannala]

ㅜㅜ 손가락이 아니라 알루미늄이 걸려도 터지네요.ㅡ.ㅡ; 카트리지 하나 날렸네요. 아까브라 ㅜㅜ

[@망치소리HammerSound]

@@jangpannala 네..전기가 통하면 안되나 봐요^^ 젖은 나무도 안되고.. 장갑을 껴도 터지네요^^

[@jangpannala]

@@망치소리HammerSound 네 취목이라 지금은 테이블쏘지만 ㅎㅎ 여건이 된다면 꼭 영입하고 싶은 쏘스탑 ㅎㅎ 영상 잘 보고 있습니다~

[@dhk7148]

바이패스 모드를 모르시는건가여... ㅜㅜ

[@berkanisk1960]

amzn.to/341H6Rn Hi, I would like to introduce you to this excellent product, the product is very useful for carpenters, I recommend the saw six

[@bradleytuckwell4854]

Best table saw sled I’ve seen made on any channel yet.

[@nomad4731]

Out of all the table saw sleds I've seen, this is without no doubt the best one.

[@망치소리HammerSound]

Thank you

[@mokongtv123]

대박 영상입니다!! 공유해 주셔서 감사합니다^^

[@Papou_Pete]

The. Most elegant design I have seen so far on KZbin.

[@leemaker6801]

와우~ 망치소리님 대박 아이템 만드셨군요.. 아이디어 정말 좋습니다. 저도 아이디어 훔쳐가서 만들어야 겠습니다. 즐거운 하루 되세요 ^^

[@망치소리HammerSound]

ㅎㅎ 꽤 쓸만합니다. 즐거운 하루 되세요^^

[@HyperactiveNeuron]

That may be the coolest crosscut sled I've ever seen. Tamar (3x3 Customs) has a really cool one but you may have her beat. I dunno. I'd vote for you just because you had the guts to screw your fence in final position without the 5 cut method or even a single test cut. That's confidence!

[@망치소리HammerSound]

Yes, it is. Thank you. Have a nice day.

[@LJBevensII]

A rather costly mistake not disabling the Sawstop mechanism prior to cutting the aluminum track. I made that same mistake when cutting a mirrored acrylic sheet. It only takes once in having to buy another safety mechanism and you won’t forget again. Your sled though is very well planned and an awesome build. I have flagged and saved your video so that I can reference when building my new sled. Thank You for sharing...👏🏽👍🏽

[@망치소리HammerSound]

Thank you. Have a good day

[@roystonwilliams7260]

Its a piece of art, thank you for leaving the hishap in the video. Well done great job.

[@khmcs]

영상 잘 보았습니다. 정말 좋은 팁을 배우고 갑니다.

[@user-bt6ss6nf3w]

너무 유익해서 이건 뭐 유료시청해야해도 볼거같습니다!! 정말 창의적이고 실용적이고 와우 감탄만 하다보고갑니다👍

[@망치소리HammerSound]

감사한 말씀입니다. 많이 알려주세요. 그것으로 충분합니다^^

[@heijud63]

감사합니다 믿고 보는 영상

[@andrewbieger5004]

AWESOME build. The parts where you setup the measuring tape was genius.

[@crosby3108]

I saw that coming saw stop never fails, slead looks amazing, thanks for also sharing the mistake

[@Ebikelover]

That fence is genius, great build..

[@PaganWizard]

I really like your design for this sled. Your SawStop table saw has a key on the right side of the power switch that allows you to override the safety device for when you are cutting metal pieces, or when you are cutting wet lumber. The replacement brakes and blades can be very expensive, using this will save you a bunch of money.

[@Andy-jr9ho]

Watching your video is a real pleasure. Highest accuracy and quality of work (anyway excessing many times a common DIY enthusiast need).

[@망치소리HammerSound]

Thank you

[@nsanerydah]

Amazing job!!! Great video. Very inspiring.

[@georgebliss7674]

Wonderful video and awesome build. Keep up the good work 🤙

[@BOSWAHANA81]

6:45 sometimes..we learn lot from mistakes, great job with the table sled Sir

[@user-ts5cy3di1m]

Большое спасибо дорогой друг!!! Замечательная работа! Посмотрел на одном дыхании

[@망치소리HammerSound]

👍👍

[@abdellaghezali99]

Super travail, je cherchais moi-même un tel système pour ma scie sur table. Grand merci pour ce partage. Cordialement.

[@woollywoolwoolz]

I guess you got a sawstop in case your gloves get caught while using the table saw? 🤦‍♂️

[@wll1948]

a melhor mesa para serra de bancada que eu j´vi no youtube...parabens!!!!

[@망치소리HammerSound]

감사합니다

[@terrybell3298]

My brother I enjoy watching your videos so much that it makes no difference what tour making. I mean dude you have a gift, you are Blessed with so much talent and design, it really blows my mind how perfect the joints are and how everything fits together I am a sign artist and do a lot of hand lettering, I've been doing it for 35 years and I am decent, but when it comes to building things I get a F. I can design something that will work, in my head, but transporting that to my hands? I'm all thumbs. Great videos, I would thanking God everyday if I could do what you do. God bless Everyone

[@망치소리HammerSound]

Thank you. You gave me strength. Have a nice day

[@davegower123]

Unique design. Nice work! Thanks for sharing! Cheers 🍻👍🏻😊

[@user-fb7fh6gh3g]

너무 감사합니다! 솜씨가 정말 좋으세요 !! 그리고 역시 쏘스탑 b ㅋㅋ

[@망치소리HammerSound]

최고죠😊👍

[@farrierss1724]

Best sled I've seen since my last winter in the Adirondacks. Well Done!! I will make one. Do not run with those scissors.

[@SER-spb]

Спасибо! Отлично!

[@josevillanueva6992]

Great sled. I like it.

[@Rage-of-War]

Great design!!!

[@1954hany]

Working on a saw in gloves is the same as putting out a fire with petrol :)

[@BriskBadgeR]

Wowzers. That is a great sled. If only I had a little more free time...

[@bobbg9041]

Well! Sawstop works! Got that test out of the way.

[@Rubin5342]

Bet you wish you had a do over on that alum channel and the gloves with holes in them ? It was a great video and a damn nice accessory. //ji

[@joedance14]

Very nice! Nice design, nice workmanship! Hope to see more.

[@망치소리HammerSound]

Thank you.

[@tims6845]

Отличная идея! Отличная работа!

[@망치소리HammerSound]

Спасибо.

[@user-yb5ww9ur5z]

Great design! Thanks for sharing, it inspiring :)

[@망치소리HammerSound]

Thank you

[@LeosTueftelei]

Nice work! 👍 👌

[@landeptv9272]

Karyanya sangat sempurna Ikut belajar gan🙏

[@bradlloyd3208]

Well I thought I had seen great saw sleds before this one, It has to be the best ever.

[@stepheneldredge6263]

I know right! Ill be trying to incorporate that adjustable fence into a miter saw station as well.

[@ALCOMMINTL]

AWESOME WORK

[@laverdadtriunfa]

Wow very professional 👏

[@Fernando.Canal2]

This is an absolutely masterpiece

[@cequelec3479]

Super idée 👍👍👍 et très bon travail bravo 👍👍

[@망치소리HammerSound]

Merci

[@draztiqmeshaz6226]

About halfway through I was like "I wish I could get through a project like this without any problems...." oh shit.

[@zaidalshammare637]

Wonderful 👏👏👏👏👏👏

[@JSKIM-se2pi]

좋은채널 이네요. 구독합니다

[@망치소리HammerSound]

좋은 평가 감사합니다. 그리고 환영합니다.😉👍

[@stefanbukowski6568]

It kooks like your reaction was the same as mine when I hit my Incra miter Gauge with my Sawstop. "!!! What just happened??? !!...."ohhhhh. #@&%$*" "well there goes $125" Thanks for keeping it in there. Maybe it will keep others from making the same mistake. Nice sled! You do a great job at showing the steps. Very efficient working.

[@dalinska1]

Very Nice Job👍

[@wineball]

와 쏘스탑에 쏘스탑성능 확실하네요 난 순간 뭔가 함 ㅋㅋㅋ

[@망치소리HammerSound]

손가락 날라갈 염려는 없네요^^

[@82okman]

멍때리고 보다가 순간 코믹이었습니다 ㅋㅋㅋ 부품값도 만만치 않을텐데 웃음을 주세서 감사해요

[@BobbyFigliola]

Yes, of course... and then some.

[@carloscesar1202]

Good job, thanks for sharing

[@sajadwoodwork]

Really nice work sir please keep it up

[@user-ej6un3qu4q]

Please put the Arabic translation. I am a good follower of you and benefited from you very much ... Thank you, always with success and success.

[@bobbg9041]

Thats a very nice system. But I'm into saving time, ill just use my radial arm saw. I may still make a crosscut sled. But honestly I dont need it.

[@zonunalelhchhun4544]

I thiam hle Mai,good work ,and beautiful aidea

[@homemadegarage24]

Excellent, perfectly done

[@allanhmelnitski978]

Fantastic!

[@abaawan]

Thank you for sharing video brother,,, like from indonesia

[@russ7269]

Просто Суппер!! Очень здорово!! Очень 👍👍👍👍👍

[@망치소리HammerSound]

👍👍👍👍👍👍👍

[@sajadwoodwork]

Nice work sir

[@oscardacrus]

Muy buen trabajo

[@arbyars.chicksawdust]

Love the sled! Sorry about Saw-Stop accident.

[@aldoarriaga0722]

S ya se que subió este video hace mucho tiempo, pero es increíble la manera en que detecta este dispositivo la energía que le transmite al riel de aluminio, pero me sorprendio más la manera en la que sobrellevo la situación jajaja

[@망치소리HammerSound]

😊😊👍

[@user-eh5xv9nu2o]

great idea

[@Evgeniyart1]

Молодец, очень круто

[@0oOLOVERo0]

Greetings,, do you have a plan for this? To follow up correctly 🌹 I loved this slide,, it it the best that I have seen so far 😍

[@dronesvisionsaeriennes]

Hi there, very nice , i've just discovered our job...but where could i get the plans, please?? Philip

[@akquicksilver]

I did the same thing with my SawStop building face for my miter with aluminum extension.

[@ΓΕΡΑΣΙΜΟΣΣΤΡΑΓΓΑΣ]

Genius 👍

[@NathanNostaw]

Oh, that 6:47 bit was heart breaking. A fraction of sec before it, I was thinking you must have engaged the safety over-ride. Nope, ouch to the back pocket. A good lesson to us all. Good to have spares ready. Without spares on the shelf (i have both, just in case I have a lapse of brain moment), it is considerable wait time on a new blade and cartridge.

[@망치소리HammerSound]

I was distracted for a while too.

[@NathanNostaw]

@@망치소리HammerSound Even though this example wasn't preventing a danger, it sure is good to know mistakes won't involve lost limbs or fingers.

[@legalldavid5586]

Very clever 👍👍👍👍👍

[@carlcarlamos9055]

Nice. I will try to cross purpose this to help with finger joints on a router table or shaper. Thanks.

[@55Barcelona]

Show us how you do this router jig if you can or share it with the creator of this channel and he could make one and document it to his KZbin Channel. Really appreciate it Carl.

[@villageidiot8718]

I'm pretty sure I don't want a Saw-Stop. Just have a lot of respect for the blade, as I have for decades.

[@BossSpringsteen69]

Ooops. Forgot to hit the bypass button. I bought my backup just in case i did the same thing. I saw sparks fly from some staples and a few screws. Not sure if the saw being in a non humidity controlled storage for about a year affected it like it did the bolts rusting them out.

[@user-ne2ev8cu5x]

Класс👍такой каретки своими руками ,я еще не видел

[@bcboncs]

Amazing.

[@iwankde5k374]

Mantap...

[@massih84lemar]

Very nice 👌🏻👌🏻👌🏻🙏

[@SYLTHECRU]

Do you offer plans for your sled?

[@johnalex3023]

There is a bypass for the Sawstop, that will allow you to cut conductive materials

[@t3jem]

I was thinking that too them realized it was probably easier to use the miter saw since he'd need extra clearance from the blade to avoid tripping the sensor in the future anyways.

[@hhyqwe]

소스탑 세이프티 끌수 있어요~~~~ 키를 90도로 꺽은 상태에서 작동시켜 주시면 됩니다...ㅋㅋ 유툽에서 sawstop turn off safety 라고 검색하시면 동영상 볼수 있어요~~~

[@망치소리HammerSound]

네 좋은 정보 감사합니다^^

[@pavelant2]

очень грамотно!

[@lcotler]

Are there plans available?

[@philliparudolph9595]

impressive

[@raffaelesala992]

Congratulations on the project, very interesting.👍👍 I have a question about the blocking system of the circular saw. Why mount it and then work with gloves that are insulating?

[@망치소리HammerSound]

It is not very dangerous than you think. My hands are very dry, so it is safer to wear gloves.

[@emulgatorx]

Once it cuts through the glove, it will trigger. I'd still be afraid that the glove gets stuck on the saw tooth and gets pulled down together with the blade with the hand still inside. So I don't think it's generally advisable or safe, even with a Saw Stop. It's weird that it triggered in this situation given that the undamaged glove should have provided isolation.

[@robertomartinabait3981]

Maravilloso. ,

[@망치소리HammerSound]

Gracias

[@janoschm.350]

Klasse 👍

[@kursataskar7086]

Merhaba matkap hangi model ?

[@tjxpuck]

아이고 아까워라 날 하나 버렸네ㅜㅜ

[@ifulchannel3979]

Mantap my friend

[@minhtu1251]

👍👍👍👍👍👍👍👍👍

[@frankkamolov3815]

👍👍👍👏👏👏

[@dirkc5529]

Nice sled 👍🏻. I think you need new gloves 😅

[@AzoEditing]

isnt wearing gloves with a sawstop kinda contradicting?

[@seanmcentee4454]

A Korean working without gloves is like an OSHA supervisor without steel toed boots. It would create a rift in time and space and destroy reality.

[@cambokarate6307]

I like

[@studiofl4221]

새로운 개념 시야 넓히고 갑니다 ㅎㅎ 그런데 중간에 마찰력 줄이려고 바르는 하얀 돌처럼 생긴 건 뭔지요?

[@망치소리HammerSound]

초 입니다^^

[@sergeiivanov5325]

Respect мастеру👍!!!!! Russia 14.11.20

[@망치소리HammerSound]

Спасибо.

[@sergeiivanov5325]

@@망치소리HammerSound 🤝

[@MrGonzach]

👌

[@stepheneldredge6263]

Well thats an expensive oops....awesome sled though

[@망치소리HammerSound]

Generous investment when making a jig^^