Tach Programming for Firstech Remote Start/Security Installation

Compustar monitors your vehicle’s engine to validate remote start activity. In the event your engine cannot be detected, the remote start operation will be cancelled after (3) three unsuccessful attempts. If you have an LCD remote, the following errors could appear on your screen - error 1, error 8, or error 08. To solve this issue, please follow the steps below:
1. Start your vehicle’s engine using the key or push-to-start button.
2. Press and hold the foot brake down.
3. While keeping your foot on the brake, press the KEY button on your remote control. Your parking lights will flash once.
4. Turn off your vehicle’s engine and remove the key from the ignition.
5. Retry remote starting your vehicle using your Compustar remote.
Note: the following video is currently unlisted to prevent unauthorized use of these instructions. If you are not an authorized Compustar installer, please find a retailer near you at www.compustar.com.

[@Klmurray1967]

Thanks for your video. The last two days my remote had a error-01 message. I followed the video instructions and it work right away. One Chirp and turn off the engine. Restart with the remote no problem. Thanks for your help.

[@jyl1970]

Mine flashes more than 3 times( The no break signal going to the control unit) what should i do?

[@khalidkakati4406]

I noted that your product not sale in Arabian gulf and middle East

[@treimche]

At 1:38, you spelled "brake" wrong. Great video though!

[@jarenbraxton246]

Really dude? Don’t you have something better to do?😂