How To program tachometer with compustar remote start

how to program tachometer on your compustar remote start
This is a car audio how to tutorial that will show you how to program the tach signal on your compustar remote start
SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS radio removals, radio installs, speaker replacement, speaker installs, car audio reviews and much more.
🔻
TAGS:
🔻 #tachometer #remotestart #compustar
TIME STAMPS:
🔻
Did this video help you? Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.com/bePatron?u=43...
🔻
WHAT TO WATCH NEXT:
HOW TO WIRE A RADIO: • Car stereo wiring harn...
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO SAFELY TAP INTO YOUR CAR FUSEBOX: • HOW TO SAFELY TAP INTO...
HOW TO WIRE SUBWOOFERS: • how to wire subwoofers...
HOW TO INSTALL AN AMP TO YOUR FACTORY RADIO • how to install a loc -...
HOW TO INSTALL AN AMPLIFIER • How to install a sub a...
BEST AMP CONNECTIONS • How to install power w...
HOW TO PLAYIST: • how to
🔻
Parts used for this install are:
🔻
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
🔻
~Tools I Use almost everyday~
NEW Milwaukee right angle driver amzn.to/2t4mDvM
NEW Milwaukee right angle drill amzn.to/2GwZAwQ
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y

[@kingtony234]

Where is that box located??

[@ebrahimahmed2291]

I want to learn, will you teach me?

[@ganeshnarayan5505]

Great video brother keep making more doing a really good job.

[@jptheinstallguy]

Thanks brotha🤜🏽🤛🏾💯💯

[@PhiMobileSounds]

I am definitely here for the security installs … that’s my area for most improvement.

[@jptheinstallguy]

yesssssir i got you bro

[@KhaiMahase]

I paid a guy to do the programming for $200. I simply could not figure it out. I have the same cm-dc3. Car would go into run position but wouldn’t crank. It was the tach that caused it to not start. I know now the tach has to be programmed first before anything. This was so much easier in the video compared to when I was doing the install lol

[@edwinsmith7005]

I have the same DC3 install in a 2014 toyota corolla it start the car but won't open or closed the doors from a R5 remote any suggestions?

[@cmiracle2]

So I did these steps and I’m still getting a tach sensing error with no start… any ideas what could be causing that? 2019 Nissan Sentra keyless start

[@IADHDD]

I am trying to install the same module (CM-DC3) on a 2019 Sienna Push to Start. I got everything connected as far as the T-Harness. When I turn the vehicle on, I get a 1 red led flashing on led#1. I can't get the green led and I have tried so many things. Btw, I have installed these systems on 4 other vehicles so I have an idea of how the process is supposed to go. I reflashed the module but I still get the 1 red led flashing. Checked all the connections but can't figure out what the issue is. Let me know if you can help me

[@sheogorathyt2609]

Hey man, I got an 02 Nissan Xterra with an FH- X720BT pioneer. The radio is getting power but it’s actually turning. Everything is plugged in and works, except the radio

[@josecaban1118]

I have a question i have the compustar t12 with the drone and the Cm900as my installer didn't do a good job installing the alarm and had the antenna disconnected i cant auto start my car it tries but doesn't crank by the way my car is a manual ive tried different thing before it didnt even try to start it used to give me a error now it tries i did reserve mode it stays on then shuts off but when i try to autostart nothing happens is there a wire or program sequence im missing

[@cellphonelocksmith]

20511024671 - Remote start failed on 20511024671, Tach Sensing Failure. - I get this error each time I try to remote start in weather 50 degrees or colder, any suggestions? 2000 integra manual. Thanks !

[@josecaban1118]

How do I program tach after the alarm has been installed t12 with drone and cm900as 2006 manual transmission acura tl

[@ruccus51]

What's up brother. I have the cs7900 system. Do they have a part or something to install for the antigrind feature like how the Viper systems have? Couple times I put my keys in the ignition and accidentally cranked it and it grinded the starter.