Couple notes from someone that uses Bondo regularly ouside of skating. 1. if youre using the bendable plastic spreaders you can 100% let bondo dry on them, its actually the easiest way to clean them. Let it dry, then bend the spreader back and forth. the bondo will pop off super clean 2. Sanding can be done with just paper, but to get the bondo to sand faster and more evenly use a sanding block so you can apply even and forceful pressure. fingers will infact, leave grooves. 3. Pros in a vest will have a clipboard with a notepad or legal pad on it to mix bondo on. this gives the worker an easy to clean "palet" to work from. when done just tear of the sheet and its clean. Plus it matches that nifty vest.
@847lifestyle3 жыл бұрын
always funny when they try and stop you from fixing wacked street spots
@KandiKlover3 жыл бұрын
Constructive vandalism hehehe
@jdoriginals92233 жыл бұрын
Chaotic good lol
@BangPhotography2 жыл бұрын
the cracks they filled at 3:30 are there so the entire slab doesnt break when it gets too hot and the slab expands. unless bondo is somehow flexible and "breathes" with the concrete then sure, i apologize.
@adamf3863 жыл бұрын
The orange vest idea is so good.
@KandiKlover3 жыл бұрын
Two way radio also. I had my ham radio walkie talkie clipped to the side of my belt and no one said anything when I was metal detecting this construction lot and digging up holes (which I filled after).
@dougmccoy12603 жыл бұрын
Yes, an orange vest let's you do all manner of things in plane sight, but only during working hours. A clip board also lends an air of legitimacy. Latex enhanced patching mix doesn't need color added.
@KandiKlover3 жыл бұрын
Actually all you need is the vest and a hardhat or if your a nerd like me a 2 way radio outranks all that. Prankster Jack Vale did it with his UNCHAP series as an experiment. I did it for fun too. Works just fine at night as well. Construction happens at all hours.
@isaac71163 жыл бұрын
Love these videos.
@ukafrode15953 жыл бұрын
Same
@michaelvaldovinos55523 жыл бұрын
Same
@hoscalequality25483 жыл бұрын
Same
@Sennensphotos3 жыл бұрын
These videos are my guilty pleasure
@yoyoyoanyoneseenmyyoyo29744 ай бұрын
I have another tip. Put Seran wrap/ cling film over it when its drying and it will be easier to sand down as it's already smooth.
@dirtydirtmcgogurt3 жыл бұрын
I saw a video where I could see Michael Burnett in the background wearing an orange vest like that. I messaged him on Instagram and asked if he was doing that to avoid getting kicked out. He said (something like) "Yeah, it really works well too". I immediately ordered one, lol. It's in my camera bag now. It's super clutch.
@FrancescPunsolaКүн бұрын
Thanks!, I work on a village where there are a nice skatepark but, of course, full of holes everywere.
@backoffice5310 Жыл бұрын
Never dreamed that learning about handyman projects would further my skating. 😅
@francocerella610810 күн бұрын
Thanks for info. Keep up the good work..
@dexter60522 жыл бұрын
I doubt i will ever do this but its still interesting
@isc89003 жыл бұрын
hey, question about skate shoes, can we use plastic/rubber tip shoes, like Converse's?
@tacticsboardshop3 жыл бұрын
You definitely can!
@isc89003 жыл бұрын
@@tacticsboardshop thanks!
@hw.lds083 жыл бұрын
@@isc8900 make sure you get the skateboarding converse though
@Life_With_Lucky_Luke3 жыл бұрын
This vid is awesome. Love it.
@greygaidies92773 жыл бұрын
Underrated af
@Skateboardisart3 жыл бұрын
Yeahhhh ty
@lilloco22352 жыл бұрын
Did anyone else notice the OJ Wheels Vest?!?! Where can I get that?!? 🍊🧡
@chrhadden27 күн бұрын
can i smooth over a grinding surface with this?
@Kekese3 жыл бұрын
Can you make a video about how to use wax correctly?
@slimjim22823 жыл бұрын
Love this
@Wellunknownbmx2 жыл бұрын
Any of my UK folks out here, what’s the bondo equivalent in the UK? I’ve got some spots to fix!
@beaumill2 жыл бұрын
I checked on google and you can order the actual stuff
@lucasl.s.78312 жыл бұрын
Bondo is a "Polyester putty". It's found pretty much everywhere
@yoyoyoanyoneseenmyyoyo29744 ай бұрын
Car body filler
@jaun5972 жыл бұрын
How much do you need? Its kinda expensive where I am but the place I wanna fix up has lots of big cracks
@tacticsboardshop2 жыл бұрын
It really just depends on how big the cracks are. You don't necessarily need to fill the entire length of the crack. Just fill the small section that you're actually rolling over. - Tim
@kremit63613 жыл бұрын
Just did this yesterday
@kutlu135 ай бұрын
RIP Ant 4:42
@andrewmdo36143 жыл бұрын
❤️❤️❤️❤️
@airsoftluke173 жыл бұрын
Use flex seal
@suppositoryrecordings Жыл бұрын
That stuff is called liquid rubber right. It seems the elastic component could really be even more durable
@sarethums2 жыл бұрын
Hi vis and a clipboard
@Skatercrush3 жыл бұрын
thanks dog
@allieboy1813 жыл бұрын
Hey how come you guys only have the spitfire formula 4’s radial shape at 54mm only in Pink on your site??
@avakas82713 жыл бұрын
Man why should they kick us out we’re fixing public areas for free ?
@frankcastle3827 Жыл бұрын
I honestly just use cement
@karentheisen42352 жыл бұрын
not cool that the guy said to throw the tape into the bush...be respectful to the environment and other people and don't leave your trash behind. thanks.
@tacticsboardshop2 жыл бұрын
We didn't say that in our video! But I know which tutorial you're referring to. Totally agree, don't litter your supplies and be respectful to the environment! 🌎✌ - Tim
@Skateboardisart3 жыл бұрын
Save me before I drove in the comments
@shrippie-42142 жыл бұрын
You shouldn't mess with cracks that are supposed to be there that concrete crack he filled in is there for a reason.
@tacticsboardshop2 жыл бұрын
It doesn't permanently affect the concrete. As the concrete expands and contracts, the bondo breaks loose far before the concrete develops any cracks. 👍
@hootiemike30914 ай бұрын
Dude is totally right we should just quit riding all together and get jobs fuck fixing spots lol
@bananarepublic1339 Жыл бұрын
This is hillarious. Just find a spot to skate, instead of doing construction work