Felting Rails - No Music! How to install Cloth on Pool Table Rails

Рет қаралды 69,053

Күн бұрын

Пікірлер: 48

@grenavoi 9 ай бұрын

Really valuable presentation. I appreciate the thoroughness of each step - all the little tricks carefully explained and ar the right time. This fellow is a model for describing a process, beginning to end as thoroughly as needed.

@TakeABreakSpasandBilliards 9 ай бұрын

Wow thank you so much! I think you're a model viewer!

@JCbrewNweld Жыл бұрын

Thanks for the rail redo video! Also, I'm glad I'm not the only one that uses the "leg lock" method for holding tools while working!😂

@TakeABreakSpasandBilliards Жыл бұрын

You're welcome! Glad to have some like-minded people out there haha

@JCbrewNweld 11 ай бұрын

@@TakeABreakSpasandBilliards Do you use glue or staples when you recloth pool table beds? If you use staples, there's a decent demand for more KZbin tutorials on the topic.

@TakeABreakSpasandBilliards 11 ай бұрын

@@JCbrewNweld I love that comment, thank you! Hopefully I can get Dave to make a video and show him people want to see more! We use both, but prefer stapling. That's why modern tables always have wood backing so you can staple the cloth down. Older tables or tables with no backing have to get glued down.

@garsonprice3441 Жыл бұрын

Thanks for the no music option. Much easier to focus.

@TakeABreakSpasandBilliards Жыл бұрын

You're very welcome!

@mariocace3244 2 ай бұрын

I used this video to do my own table. It was my first time and I did a good job. Thank you!

@TakeABreakSpasandBilliards 2 ай бұрын

That is amazing! So glad it worked!

@frankmartin1339 3 ай бұрын

Great video straight to the point just covered the first bumper

@TakeABreakSpasandBilliards 3 ай бұрын

Excellent job! Let us know how the other ones went, since I can be a difficult process. Hope it went great!

@michaeljohnson5108 2 ай бұрын

Great explanation/demonstration. Thanks!!

@TakeABreakSpasandBilliards Ай бұрын

Glad it was helpful!

@TSurge Жыл бұрын

Thank you so much for this video. All the guys are usually out on jobs so im the only one back here. So usually they cant help me out with rails. But this video is a big help

@TakeABreakSpasandBilliards Жыл бұрын

Glad we could help!

@phillipburton8575 5 ай бұрын

Great video... mate.. was really helpful... Definitely made life easy... my cushions were different but the stapling technique was great and really helped..

@TakeABreakSpasandBilliards 5 ай бұрын

Glad it helped!

@gazman1001 27 күн бұрын

Great video. Any chance do a video on the bed cloth install. 😁

@TakeABreakSpasandBilliards 26 күн бұрын

Coming soon! We're looking for the next opportunity to do one on one of our floor models

@laverdadesmejor 5 ай бұрын

Getting ready to refelt with Simonis 860 but couldn't find the video you mentioned posting with that cloth????

@jeremycummins2908 4 ай бұрын

Ive recovered bar tables and we used hot water to avoid wrinkles while doing rails .i do not have mush experence doing home owners tables and we mostly used a murcury backed felt. I haven't recivered a table for ten pkus years. This video was very informative

@TakeABreakSpasandBilliards 4 ай бұрын

Thank you for the praise, it's good to hear from a veteran of our industry :)

@piokul 6 ай бұрын

Very helpful, thank you!

@TakeABreakSpasandBilliards 6 ай бұрын

Glad it was helpful!

@kimbye1 Ай бұрын

Camel coloured cloth in the video for the rails? and the cloth under is that Simonis Gold?

@TakeABreakSpasandBilliards 26 күн бұрын

Correct, Camel and then the cloth underneath was extra imperial premier gold that we had

@tomburns890 6 ай бұрын

Good video if the strip is a little lose (a few of them have sunken down exposing some wood rail that is like a sharp edge I can feel with my fingers or snags my pool cue some when hitting off the rail) how do you tighten the stripping up in some areas) how can I make them fit tighter I was thinking of adding a piece of paper? And regarding the pocket facings I have 1/8 or 3mm now and want to tighten my pockets can I added another 1/8” or 3 mm on both sides or take the 3mm off and glue a new 5mm (3/16”) on. I’d prefer to just double up the 3mm. Thanks

@TakeABreakSpasandBilliards 6 ай бұрын

I've seen a few strategies employed to make a loose feather strip stay down. Wrapping it in electrical tape or masking tape to make it bigger is an option that we've seen work the best other than purchasing new feather strips. Your paper idea might work, just the tape will stick to the strip and make for easier handling. And on the pocket facings you can do either strategy. We recently installed someones table where they asked us to double up the rubber end facings and it worked out really nice.

@tomburns890 6 ай бұрын

@@TakeABreakSpasandBilliards Great thx 4 getting back to me. I meant double up the facing not bounce. And masking tape sounds like a good idea.

@TakeABreakSpasandBilliards 6 ай бұрын

@@tomburns890 Sounds good! Let us know how it works out

@cosullivan1357 Жыл бұрын

Learned a ton thank you. I’m a professional finish carpenter and your craftsmanship speaks volumes. Cheers. Also is that a “standard” wide crown stapler?

@TakeABreakSpasandBilliards Жыл бұрын

Thank you for the compliment! Boy, I wish I knew what the standard is, we use a Duo-Fast Stapler with 1/2 crown and 3/8 leg. Any stapler that gets you good compression that sends a staple roughly that size will do you just fine.

@ralphfasano1686 9 ай бұрын

Great video.. I have an antique table c:1920 and the wool has been replaced many times so the wood has many staple holes. Can the wood rail itself be replaced too? Do you know anyone in the northeast that does this work. thanks

@TakeABreakSpasandBilliards 9 ай бұрын

You may want to contact a furniture restoration company and see what they can do with the wood. You may try to staple it anyways, but most billiard dealers don't have the capabilities to restore old tables like that unless they specifically say they have that capability. That's why I say to seek out a furniture restoration company, and then you can contact your local dealer for cloth installation unless you still want to handle that yourself, which is great if you want to do that!

@craiglopp7018 5 ай бұрын

Check out blatt billiards they restore antique tables

@xkred2413 8 ай бұрын

Thank you for this video. Do you know any good pool table mechanics in the Los Angeles area?

@TakeABreakSpasandBilliards 8 ай бұрын

Thanks for watching! We're in Utah, so I'm not too familiar with those in the industry out in California. If I were you I would contact those closest to you and go with your favorite choice out of those, because having a local dealer that can service you quickly is nice to have.

@WeirdAM7 10 ай бұрын

Do you guys restore tables? I've got a Brunswick York that Im interested in restoring or selling.

@TakeABreakSpasandBilliards 10 ай бұрын

We can service tables in the sense that we can install new bumpers and cloth, and in some cases we can even buy replacement parts but on old tables like that where you have to rely on trying to restore or repair the existing the existing wood components you might want to consult a furniture repair service. We can handle the other things like upholstery (installing cloth), leveling, and bumpers though.

@nickvergin Жыл бұрын

Stupid question here. But would i be ok if i used a air finish,staple gun?

@TakeABreakSpasandBilliards Жыл бұрын

Hm I think it would work. You just need something that will staple a good sized staple down into wood without caving into the wood but being able to penetrate to flush as well. Just check your PSI but it should be fine?