Taking A Stock Subaru WRX STI To Stage 3!

The Build Sheet: www.thebuildsh...
Today we are taking Tinas (IG: Krisw3) STI and actually giving it some performance modifications! Her car is pretty much stock. It's got an intake on it but I really don't count that as too much. SO We've got a nice set of ID1050s, Grimmspeed limited catted downpipe, Perrin 2.4" Turbo Inlet, Grimmspeed Boost Controller, Cobb fuel lines, and an AEM 340LPH Fuel pump to go into the car! This should wake it up quite a bit and put the car around 300WHP or so!
Smeedia Merch: www.smeedia.ne...
Smeedia Discord Server: / discord
Tools For The Garage:
Special Oil Funnel: amzn.to/3oeyiCq
Coolant Burping Tank: amzn.to/3iesMfn
3/8" Socket Seet: amzn.to/3uf2dLT
1/4" Socket Set: amzn.to/2XPEd5K
3/8" Impact Gun: amzn.to/3lYfO6q
3/8" Ratcheting Wrench: amzn.to/3ueQNYu
Batteries for those electric tools: amzn.to/3zQE5A5
Floor Jack: amzn.to/39KdE4y
Jack Stands: amzn.to/2WfVWCT
Gucci Screw Driver Set: amzn.to/3EXGTPN
Hook and Pick Set: amzn.to/3kJdeBJ
Audio:
Lioness - DayFox
Get Away - Tubebackr
Flashes - Mezhdunami
Fresh Up - Tubebackr

[@joshanderson1122]

Random quick builds are great. They break up some of the grinding projects require. I'm always reminded you will never see a shaved Subaru engine bay. It's just a rat's nest of hose and wire

[@Smeedia]

I've seen a few but there is so much got damn shit in there 💀

[@C4banchee]

It's nice to know that you can get that much done that quickly. I just picked up my 22 WRX and those first 1000 miles are murder man, but I think the first thing it needs is an exhaust its so quiet. Keep the content coming man.

[@Smeedia]

Catback is always needed 🔥 they all don't take too long once you get into it a bit 🥳

[@shadow123739]

I definitely like seeing how easy it is to do the easier mods that are for still being regular daily driver's while getting more power would love to see more 😁

[@Smeedia]

Definitely try to get more of them added in 🥳

[@hellomyles]

O2 sensor removal and install mega hack! GM has a spray can, I am not home till Sunday so I can’t give ya the part number yet, but I have used it professionally for like 20 years and ever since I’ve used that spray, I have never had an o2 sensor not come out or go in and damage threads. You crack the o2 sensor. Spray the special sauce. Tighten it and then loosen again, and keep working it back and forth until it comes out easy. I have done probably thousands of o2 sensor removals and installs that way. I’ll try to remember to post the part number Sunday. It works great on exhaust bolts and nuts too. If I remember right, it’s a penetrating oil with liquid graphite in it. Anywho.

[@Smeedia]

Please lemme know what this goodness is!

[@hellomyles]

@@Smeedia part #88862627 is the GM part number. It’s called “Rust Penetrant and Inhibitor Heat Valve Lubricant. It’s the bees knees. I’ll shoot ya a pic on the gram of it.

[@stevepowell1347]

I know it's not everyone's taste but love the wrap and engine dressing. Not sure about the back end though but obviously she loves it and that's all that matters

[@Smeedia]

Yessssir 🔥 not my taste for looks but I can respect the work put into it 🔥

[@cspiess24]

FYI, Cobb has 2 Fuel Pressure regulator SKUs, one is for aftermarket fuel rail and the other is for the factory rails. With the big difference between the kits being the fuel line they come with.

[@Smeedia]

We found that out but still we're able to make it work thankfully 😅

[@matd8958]

This is literally where im at in my build , wish i had a friend with your knowledge to help, i live in spokane, i know bader is around the courner to tune it but to expensive for me to do the work . Since just moving here know friends yet

[@Smeedia]

See if there is a local subsru group out there, I'm sure someone in the area is willing to get down into it with you 🔥

[@AlexRamirez-wx3xc]

Im so glad to hear I'm not the only one that leaves those fuel guards off I hate taking those off especially on the older subies

[@Smeedia]

They're the dumbest things! 😅

[@omialmanza1900]

That engine bay looks mint. 💪🏼 stg 3 is a win all day!

[@Smeedia]

It's soooooo blue 😅

[@kristinaellis1903]

Thank you!! We like it minty

[@omialmanza1900]

@@remissiveslave thats your problem dude, mine's power shot up very well.

[@leftinashes]

Hehe... After watching this episode I'm in the mood for some mint chocolate chip ice cream!

[@foxunfocused]

Love the color scheme of Bubbles. And I'm definitely going to have to check out thebuildsheet!

[@Smeedia]

Cool website 🔥 Her cars nit my taste but I can respect the work 😅🔥

[@kristinaellis1903]

Thank you! 🖤🙏🏼

[@ObiWanStromboli]

It’s so nice to see Smeedia’s SoCal cousin Travis every once in a while.

[@Smeedia]

Shoes up whenever he wants to 🤣

[@followtheornghat]

Lets go baby! Bringing bubbles up to the next level!

[@Smeedia]

Need to modify all the subarus!

[@matthewkennedy5483]

Never had a chance to own an EJ yet, but man that rumble.... it makes me happy in ways I can't describe. My FA is nice but it just doesn't bring the same kind of Fizz (older top gear reference)

[@Oldmannobody]

Agreed man, I wanted an EJ too. Went with the FA too. Older models are really holding their value.

[@BDA0531]

I might be the minority but despite being an EJ owner, I really love how the FA sounds. Soooo much turbo spool with a tomei with a catted jpipe. I wish I could afford both

[@Oldmannobody]

@@BDA0531 Agreed 👍. I’m doing stuff that doesn’t require a tune. Can’t afford a down pipe and to retune. Just doing suspension stuff that I can do myself. The remark axle back really opens the sound for what it is, lol.

[@unknown_gamer6956]

As a former EJ owner, I definitely miss the deep burbely rumbley sound it had. For sure a unique sound. My FA has grown on me a lot the last couple months since I got it and have come to love it more and more. There's some good setups for it to really bring out and open up the tone. It's all preference

[@Oldmannobody]

@@unknown_gamer6956 Most definitely. I’ve contemplated forking over some 💳 credit card for a Grimm speed down pipe. Not sure if this would be the best or not?

[@vlNemesislv_]

Love the fact she’s on bags, I’m at a stance look with my STI and I get so much hate about but idc lol

[@Smeedia]

Ain't nothing wrong with that 🔥 my STI Was the same when it was on bags

[@cughan_9482]

Just makes me want to buy stage 3 kit for my car! Best of luck with dyno prep and knowing the resistance of the fuel level sensor is great to have!

[@Smeedia]

Thanks dude 🥳 if it was on a weekend I'd have you guys pull me out there 😅

[@cughan_9482]

@@Smeedia ahhhh good 😊 thought you didn’t like our job last time. We were wondering why you didn’t reach out to us. Just give us a heads up next time its on a week day and we can take time off work for it. Wanna see it rip!

[@Smeedia]

Did not wanna make ya'll call out of work of we could avoid it but good to know 🥳

[@cughan_9482]

@@Smeedia next time 😊

[@tyhyhh]

Did my first turbo and replaced my inlet tube on my 05 legscy gt literally took me all day 😆

[@andrewmonahan4503]

Cobb website gotta still be dial up speeds

[@Smeedia]

DUDE FOR REAL!!!

[@Anudist]

Not a fan of that car, like, at all (sorry, not sorry, Tina), but it's always a pleasure to watch the work being done. Enjoy the e-tuning, Tina! Hope you get all the horsepowers!

[@Smeedia]

Not my cup of tea either but I'll gladly make another car quicker 😅🔥

[@freddyrivera318]

Yeah that was a great video. 👍 great transformation 👏 I need to do something like that to my 2020 wrx if you need a car for your next video. I will drive to you from Tampa.

[@Smeedia]

Let's goooo!!!!

[@02_bluebaru69]

Yo the build sheet is an awesome idea! I'm excited to get that going for my subie

[@Smeedia]

Setting one up for the Evo as well 🔥😁

[@ThatwhiteSTI]

Can you do an update video on how to make higher HP with the new rules that are in place? Also would you still be able to register your car in another state so you don’t have to deal with emissions inspections? Also I can’t wait for buildsheet to be finalized so I can get everything organized

[@Smeedia]

Depends on the state but some states you can register outside! And yessir I can 🔥

[@cjhouse8666]

I got $900 for my stock downpipe a week ago. I haven't done injectors and fuel pump yet so my tuner had to be very conservative with the tune.

[@Smeedia]

Stock downpipes be selling for some nice change 😳😳😳

[@mrblonde041]

It’s about time she did something power wise lol

[@Smeedia]

Been yelling at her forever to do Power mods lol

[@Not.The.Avg.Smitty]

My wife loves hers with all those mods and then some, gonna help bubbles get into traffic a bit better I'd say.

[@Smeedia]

Should add a nice bit of spice into it 🔥

[@c.j.cameron1820]

5:42 You said you didn’t think you were gonna be able to do fuel rails. We’re you able to get them to fit with the TGV motor. Cobb still sells Fuel rails and I don’t wanna waste money on fuel rails if I can’t get it to fit with the TGV…. 🤔

[@Smeedia]

Fuel rails fit, but the lines did not 👀

[@graver80]

very nice. thanks for your time and dedication.

[@Smeedia]

Thank you for your support Don!

[@griffinklockeman2135]

Do you think that adding a phenolic spacer will help the fuel rails clear the tgv motors?

[@michaeledwardlenzi]

Yes I enjoy the transformation videos. Please do more if you can.

[@Smeedia]

Will do 🥳🥳

[@aidanfyfe5647]

fkn loved this content man! just got done with final so I am able to watch videos again! missed this channel!

[@Smeedia]

Ohhhh how did the final go?!

[@Thechaoscrusadors]

Hey tanner are you still interested in the shift knobs?

[@Smeedia]

I am! 🥳

[@chrismuncey976]

now lets see a epa compliant with a fp blue or fp green please. got to rethink my build now? is there a way to go rotated with staying epa compliant

[@Smeedia]

Yes you still can, I'll try to whip something up here soon 🥳

[@chrismuncey976]

@@Smeedia thank you...was literally about to order front mount and rotated kit and tgv deletes and then cobb hit us with the epa stuff. and shops around mobile alabama wont really give me any info on what all i can do now since epa guidlines with out having to go standalone because i have a 2018 sti and i want to retain all functions. will be waiting for some new videos from you and bader

[@backsnapd2040]

Bro those Ghost energy drinks are AMAZING.

[@Smeedia]

They are 🔥🥵

[@iRock2Hard2]

Good work on the upgrades real informational what etuner you recommend

[@DarkInstinct05]

These videos are total wins bro. Helping others out and more great content is always nice to watch

[@Smeedia]

Always enjoy being able to helps others with the builds, plus a good time to make some cats quicker 🥳

[@JoJo-GoldenEagle]

That sounds so great! The subie rumble is lovely. I was really excited to see mine have the stock downpipe so I can replace it some day. Currently have the ETS extreme cat back, but may get AWE track possibly. Any recommendations for downpipe? Also my wife loved the name Bluebaru 😂 she said if she had a blue subaru someday she would take it lol

[@Smeedia]

Lol the name is free game 😅🔥 I'd suggest the grimmspeed downpipe! Solid quality and no CEL!

[@JoJo-GoldenEagle]

@@Smeedia she likes her milfmobiles aka the large SUVs loll 😂 but I had to tell you 😂 awesome! Always a fan of no CEL. I appreciate it 🙏

[@coltonporter1496]

Why can’t you use the iwire tgv delete resistor plug?

[@Smeedia]

Is this a thing?!

[@Precisionmagert]

Stage 3 huh?. Will this be a standalone tune. I'm def geeked for the video. Prepping my forester xt for tune this year

[@Smeedia]

This is still only using accesstuner 🔥

[@Precisionmagert]

@@Smeedia ok now that make sense.

[@jameskocks4734]

well carmax gave me 22k for my 18 wrx. i still plan on following and supporting your channel.

[@Smeedia]

Whatcha looking at getting next? 🥳

[@jameskocks4734]

@@Smeedia still have my 2005 4runner. It has that bad ass 4.7 V8. Later on another newer 4runner. I really want a TRD pro.

[@supercarsofwichita9485]

@@jameskocks4734 hey I got a 2001 4runner to go with my 2014 wrx hatchback and I get more compliments for the 4runner and it's not even that clean yet

[@xelamua239]

ahahaha holdin' hands just to purge the fuel was too funny. Hilarious!

[@Smeedia]

😅😅😅😅

[@GhosTechnica]

Who is doing Tina's e-tune? I'm no longer in the CDA area of North Idaho and have no local tuners within 500+ miles of me in ND. Have everything but the catted DP and boost controller to go stage 3 in my STi. Thanks!

[@Smeedia]

I belive it was Gary Bains 🙏

[@GhosTechnica]

@@Smeedia thank you! 😊

[@ahhason]

Also looked like a catless DP. How did you get around the CEL with Cobb?

[@Not.The.Avg.Smitty]

the hiflow cat is about 8" away from exhaust flange.

[@Smeedia]

Was a grimmspeed catted 🙏

[@meffffy]

I just bought the same exact downpipe for my 2011 and the rear o2 bung is before the cat for some reason. Her basemap probably has the rear o2 dtc disabled just like the original stage 2 ots map did. I'm dealing with this issue right now and will be switching to open source as you can still do all the stuff needed lol.

[@CanadianRC96]

@@meffffy I even asked Grimmspeed about moving the o2 sensor to behind the cat, they told me it would still cause a Cel. I don't understand how people are tuning now with accesport for Grimmspeed dp, even with an old map to disable o2 how would the tuner edit that without the new software taking effect?

[@tartarsauces]

So would you need a pro tune in order to add a bigger top mount intercooler at this point?

[@jakelonghorn9852]

Your literally great at replying…so question just got my car WRX back together forged internals, stock heads, CBE, BC, Cobb sf intake, turbo inlet, downpipe, and VTA BOV… runs great but won’t let idle after revving or driving and coming to a stop??? And my ideas of where to start?

[@Smeedia]

Does the car die when it tries to idle?

[@jakelonghorn9852]

@@Smeedia if I start it and let idle it will idle for hrs! If I try to rev it and it returns to idle it will stutter and stumble til it catches its self? In princess of getting AFR gauge hooked up

[@Smeedia]

Sounds like a decent sized vacuum leak somewhere 👀

[@jakelonghorn9852]

@@Smeedia thanks boss man! Can I test that somehow?

[@Smeedia]

Spray soapy water on vacuum connections or smoke test 🥳

[@ahhason]

Did you make sure it was in sport#?? Could be the reason why you couldn't boost past 10PSI

[@Smeedia]

Just in sport mode, the base tune had a 10 PSI cut on it 😅

[@alexpiedrasanta7074]

Could've fooled me that bubbles was not stock before. 🤔 Big surprise to me! Good luck!!

[@Smeedia]

Was all show and no go 😅 now it has a little go

[@kristinaellis1903]

Cobb intake don’t count as go! Lol 😆

[@mrbeans2425]

That is gorgeous! 😍 Do mine next please!

[@Smeedia]

Make them all fast 🥳😈

[@joshuawilliams639]

All this work but no front mount intercooler!

[@Smeedia]

THATS WHAT I TOLD HER!

[@Menace_sti]

Finally bubbles went for more power! Now shes power bubbles! Reminds me i need to upgrade my fuel mods

[@Smeedia]

Been giving her shit for so long to do Power stuff lol

[@kristinaellis1903]

I finally took Tanners advice and gave her some power. 🤘🏼🔥

[@micko9111]

Sounds wicked

[@Smeedia]

Makes me miss UEL subaru sounds

[@smashr5627]

Digging the new hair I say you keep it 💯

[@Smeedia]

Don't tempt me with a good time 😅

[@groo2765]

Taco Time!!!! So lucky!!!! 🌵

[@Smeedia]

Taco time is 🔥🥵

[@RadDadisRad]

Repping HP Academy. 👌🏻

[@Smeedia]

Yesssssir 🥳

[@TheE3R]

Whattt up Tanner?...hey brother, im hardly debating what clutch kit i'm going to get for my build, on my quote my tuner add the South Bend Stage 3 Daily, but i dont know if to go with that or save couple 100 more and get the Comp Twin Disc, Exedy Hyper( I heard it tend to rattle while iddling) or Xclutch, i want something that is not a PITA expecialy on heavy traffic, but something also that'll handle the torque for 600+

[@Outlier117]

I have the comp twin disc organic sprung clutch and it’s honestly a dream. No rattle and the clutch pedal feels like stock or even lighter. Holds 750tq. I’ve got it on my 750whp/600tq setup and it’s awesome. Just my experience and I’d recommend it to anyone!

[@Smeedia]

ACT has always been my go to, the mod twin feels fantastic and holds power well. The comp clutch I've never really liked. They were suuuuuper stiff. X CLUTCH is another highly suggested one!

[@ИванДинков-ъ8й]

should forged pistons be fitted for stage 3

[@ezimm81]

Nice video as always tanner. Does she have any mods for shifting or positive shift kit. I noticed my car has a lot of whining sound since i did the shifter and positive shift kit and the rare diff brace. Not noticeable in the video could also be that the exhaust is loud.

[@Smeedia]

I don't think she does, she definitely needs it after I drove it 😅 mine also whines a TON!

[@ezimm81]

@@Smeedia was curious. My Sti has the read diff brace. Whitelines positive shift kit and short shift with front and rear bushings. I gotta record it and shoot it over to you on Facebook didn’t know if that was normal or not

[@stephenmargetjak6989]

so you didn't have to change out the fuel lines and rails? just injectors/fuel pump and regulator?

[@Smeedia]

Yes 🤝

[@stephenmargetjak6989]

@@Smeedia trying to avoid all that work if not needed....what boost controller was that you installed?

[@Smeedia]

I belive grimmspeed 🤝

[@agentbahan397]

SUBARU GO BOOM!!!

[@Smeedia]

BOOM

[@LegendaryGarageYT]

My Sti just has a Cobb catback and intake but I noticed it’s not really loud. Would a downpipe make this louder cat or catless ? Also would you recommend removing the resonator form the Cobb catback for sound purposes

[@Smeedia]

Keep the resonator and snag a catted downpipe, should add some nice tone to it 🔥🔥🔥

[@stefanvanbraam4378]

So green in Washington. Not use to seeing much grass in vegas. Lol

[@mightysurtur752]

Is that the GS catback?

[@Smeedia]

MBRP 🙏

[@whatupmyhomie8246]

What are the exact list of items to convert into a stage 3

[@Smeedia]

Downpipe Injectors Intake Fuel pump FPR Boost controller

[@jamielegg3605]

Hey Tanner, what lift is that you use, I'd love to get one.

[@Smeedia]

These are what I use amzn.to/3P1OeTy🔥

[@K-Zoo_Angler]

That sounds soooo succulent 🤌🏻!

[@Smeedia]

I miss some UEL sounds 😍

[@K-Zoo_Angler]

@@Smeedia Meeee too! I miss the EJ in general! I was gunna snag a UEL for my FA motor, but the that means another money crunch for some tuning. That's all I would have left to do to mine.

[@pab1it05]

Oh my Buddha, what is ALL THAT STUFF ON THE BACK OF THAT THING?!??!?! You could use that to reverse into someones front bar and rip it clean off!!

[@Smeedia]

🤣🤣🤣🤣

[@kristinaellis1903]

It’s a bit dangerous. Lol 😆

[@Lucas-nz8em]

How did it feel working around that air injection pump, that it likely took much restraint not to rip out. Haven’t had to do that in a while have you?

[@Smeedia]

Ended up taking it out to work around it 😅

[@sagewillett7892]

Quick question! My WRX has 79k, do I need to use high mileage oil or would it be okay not too?

[@Smeedia]

Would be okay not to 🙏

[@bp198682]

I’m going stage 3 this weekend and my tuner told me I can do the turbo inlet without taking the manifold out. It’s going to be like shoving 10lbs of shit in a 5lb bag but I’m going to make it happen.

[@Smeedia]

I've done it that way before, good luck and God speed. Lube that thing up and send it!

[@erickberard3820]

Idk what car youve got but i literally just finished this today on my fozzy and let me tell you dude...

[@erickberard3820]

In all seriousness i removed the 3 bolts for the power steering pump helped immensely just be careful with vacuum fittings when youre tightening the rear bolt back up

[@andrewharris7868]

You know, I like ur fun little quick projects. Like a breather for ya. Funny tho, ej vs fa boost. My fa run bout 20psi, 24 when she's feelin extra 🔥 🌶️ 😉

[@Smeedia]

We like the spice 🔥🥵

[@alexuong963]

holy shit i saw this car last sunday at pacific raceway IS THA BUBBLES???

[@Smeedia]

That would be it 😅

[@websters5569]

I miss this kind of video

[@Smeedia]

More coming 🙏

[@websters5569]

You finished all of those on that same day?! Jeez! I wish you’re close to me, I’ll just pay you to do the same stuff as I learn watching you do what you do.

[@muhammadfahmi7960]

Nice tshirt...HPA 👍👍👍👍👍

[@Smeedia]

Gotta represent 🥳🔥

[@gino4171]

when will the announcement for the giveaway be?

[@Smeedia]

Tomorrow's live stream 🔥

[@jesseg1758]

Sorry, bro! You are awesome. Though I need help. With the AF20…

[@jeprodigalson792]

That random Wig on the ground 😂

[@Smeedia]

Lmao don't question the wig 🤣

[@ThatWasherNerd]

Love the mods, but my gosh I hate that wrap.

[@Smeedia]

Not everyone's cup of tea 😅

[@-ink.-3948]

What colour is the wrap on this VA 🤔

[@Smeedia]

Satin black 🤙

[@Kindakinglogan]

Is this eastern Washington?

[@Smeedia]

Western WA 🤌

[@Stinkeye13]

20:34 put on your seatbelt tina!!

[@Smeedia]

I think she had it on 😅

[@Stinkeye13]

@smeedia oh i missed the part where she said it needed to be fixed😂

[@Smeedia]

Just the beeping 😅

[@kristinaellis1903]

Hahaha I had it on. 😂🤘🏼

[@erickberard3820]

Where did you guys get the tune?

[@Smeedia]

Gary Bains tuned it 🙏

[@Volksmash]

RiP :( tons of E-85 stations around me and no flex fuel kit to buy :(. Dreams dead

[@ImSchizoidMan]

[@ImSchizoidMan]

Yeah, they dont have those near me, i guess I'll continue to deal with chipotle

[@Smeedia]

Taco time is well worth it if you ever get the chance 🔥

[@codykellner9985]

Woooo!!!

[@Smeedia]

🥳🥳🥳🥳

[@jdsayler96]

I saw that Ghost Energy Orange Cream energy drink, shit is 🔥

[@Smeedia]

It has replaced my reigns 😅🔥

[@tracyclark7143]

Hey, what lift are you using to lift your cars?

[@CO_EVO_8]

Clean aside from the spiked lugs.

[@Smeedia]

Between those lugs and the tow hook that was on there, my shins are beat to shit 💀🤣

[@CO_EVO_8]

@@Smeedia I believe it lol

[@kristinaellis1903]

😂😂😂 sorry tanner!

[@mrsubaru5367]

I need that,nice

[@Smeedia]

🥳🥳🥳

[@dreambiggarage]

Build sheet is dead ?

[@howdyags5149]

That wig cracked me up 😂

[@Smeedia]

The wig returns 😳

[@Dulc3B00kbyBrant0n]

is there a reason peopel dont get air pump delete?

[@roli710]

Who tuned the car? I have a similar set up and am looking around for recommendations.

[@Smeedia]

Gary Bains 🤙

[@JasonSnailer]

Great vid

[@Smeedia]

Thank you 🔥

[@Shakan_not_Stirred]

What front lip and splitter are those, if you don’t mind me asking?

[@Smeedia]

I know the lip is seibon 👀

[@kristinaellis1903]

It’s just a seibon lip :)

[@Shakan_not_Stirred]

Thanks! My front lip and splitter bit the dust after too many speed bumps and other various obstacles 😂 haven’t been able to decide what to put back on there but that’s just so clean looking on the front together I had to know

[@anthonyselvek2780]

We’re you able too fit the aftermarket fuel rails with the stock tgv ?

[@Smeedia]

The rails fit, but the pre made lines did not fit

[@anthonyselvek2780]

@@Smeedia glad too hear that I’m pretty much doing the same setup as that car. With the Grimm speed down pipe did it throw a cel ?

[@Smeedia]

No cel 🥳

[@anthonyselvek2780]

@@Smeedia I hope I’m all good when I install mine

[@juliomiranda6801]

grimmspeed or cobb intake for 15 STI? leaning more towards GS

[@Smeedia]

Cobb 🤙

[@benjaminphantomhive]

Ez30 but what power does stage 3 make

[@Smeedia]

200hp

[@benjaminphantomhive]

@@Smeedia that all

[@Smeedia]

+50

[@Smeedia]

+400

[@benjaminphantomhive]

@@Smeedia not too bad at a dig that's rally good

[@kkohn1996]

I live the color scheme but that rear end is really goofy to me idk I'm not a fan

[@apreviousseagle836]

I would say, the tinier the doge, the bigger the stage ;-)

[@Smeedia]

Oh yes yes! Facts 🥳

[@johnsaunders5809]

Not first but here within the first 5 min!!

[@Smeedia]

Eyyyy early! 🥳

[@Grc011]

Bro the wig fits 😂👌🏽🔥🔥

[@Smeedia]

Lol it had to make an appearance 😅🔥

[@Grc011]

@@Smeedia it was so worth it 👌🏽😅🔥

[@areito5]

Is it a Engine light on? @smeedia

[@Smeedia]

No engine light 🥳