Taking the $100 BOAT Out for the First Time! Running the River with the Mud Motor! This Thing Rips!

Taking the $100 BOAT Out for the First Time! Running the River with the Mud Motor! This Thing Rips! How, Will it run?
I took the 10 foot Jon Boat Alumacraft down to the river to run the river and see how this boat does up and downstream. This little boat surprised me by running shallow and seeing just how fast this mud motor will take this boat. The Mud motor has been upgraded from the 212 6.5 horsepower to around 9 horsepower, and has the beef to push this boat all around. This is almost a mud motor review on a jon boat. This boat is going to be a really good budget jon boat to bass boat conversion.
Get your own Mystery Tackle Box for 10.99 below Use CODE: BASSFACTORY
mtbfish.com/bassfactory
Buy All Catch Co made fishing tackle below at Karls, click the link for Googan Baits, BioSpawn,
1000 Fish, Googan Squad
Some of the greatest tackle for a great price.
Shopkarls- gokarls.com/bassfactory
What I USE for FISHING!!!!!!
Lews Spinning Combo - amzn.to/3ymPdF3
Lews Baitcaster Combo - amzn.to/3A3iuVS
Abu Garcia Combo - amzn.to/3A4U7qz
Fishing Braid - amzn.to/3ikSH5A
Fishing Mono Line - amzn.to/3ifFoTU
Nikko Helgrammite - amzn.to/3fkQEw8
Googan Zinger Spinnerbait - amzn.to/3jdP3JP
Googan Mondo Kit PRO - amzn.to/3lkOy3p
Googan Mondo Kit - amzn.to/3fn72fN
Amazon Roostertail Kit - amzn.to/37hsA9k
Rebel Crankbaits Kit - amzn.to/3ynUPin
Crappie Magnet Kit - amzn.to/2WQFGbH
Panfish Magnet Kit - amzn.to/37eIXmR
Go Pro 5 Black -amzn.to/2VfLVoH
Sony ZV1 Vlogging Camera - amzn.to/3C8fpp5
Rode Micro Shotgun Mic - amzn.to/3zYnkDN
HP Pavillion Editing Laptop - amzn.to/3fFK4Rp
Editing Software Adobe Premiere - amzn.to/3C7ijuA
*Amazon affiliate links in description
I wonder if i can do a barnfind boat. Free. Abandoned boat with a jon boat to bass boat conversion attached to a boat restoration.
#mysterytacklebox #catchco #Karlsbaitandtackle

[@TBassFactory]

This boat is so much fun!

[@riddle58]

Derrick that’s real fast, that mud motor is the way to go you flew through the river. A lot cheaper than a new 5 HP outboard. Great video!

[@TBassFactory]

That’s why I love that motor Phil. That boat was flying upriver. I think they make a kit where you can convert that 6.5 to 22 horsepower for around $750

[@riddle58]

When I was a kid, high school I had a Jon boat with a old 20 hp on it and my buddy had a pumpkin seed boat with a 20 on it, we put both motors on the Jon boat an made his brother sit in the front. His brother was scared. The boat flew was fun for a few hours. Then the transom cracked in the middle of the lake we almost didn’t make it back to the dock. Good ole days!

[@DennisBohannan]

I have a similar setup for times when needed.

[@TBassFactory]

Oh yeah! They are so much fun

[@riddle58]

JB weld in a emergency or simple repair has worked for me.

[@TBassFactory]

Yep ol job weld has saved the day a lot for me too. My job supply was empty when I was down at the river. It would of fixed that leak no doubt.

[@ashleynaylor1341]

What a boat!!! Looks like you had a good time!!

[@TBassFactory]

It’s a good one. I had a blast

[@azlongtales]

We love our ten ft longtail builds they have done great for us

[@TBassFactory]

One yeah. I love my long tail on the river. So much fun

[@TimHaunFishing]

I love the Flintstones ingenuity at the beginning, worked pretty good and gave me a chuckle. I'm really impressed with how quick that kitted mud motor will move that little Jon and how fast it will move. Be sure to let us know the titling process goes. That is the major hurtle for a lot of us would-be Jon boat builders. Because here in my neck of the woods the delta between two identical boats, one with title and one without, is about $1000.

[@TBassFactory]

Yep, I hope I can get it figured out with the title. I don’t wanna make this boat a private water only boat or else I could get a fine from a warden. The last option for this boat is if I buy another 10 foot jon and combine them and make the worlds longest jon boat, ha thanks Tim

[@TimHaunFishing]

@@TBassFactory I'd love to see a 20' Jon boat🤣

[@michaelrodriguez2973]

I look up to you man your spirit of adventure is contagious

[@TBassFactory]

Ha, yeah I think I was meant to be an explorer. I appreciate that Michael

[@MrRyancangri]

Awesome!!!

[@TBassFactory]

Thanks bud!

[@MudMotorsMax]

I recommend a Robertsons Torque Tube Looped Header for even more torque & power… believe it or not you are losing a lot out of that open pipe.

[@TBassFactory]

I’m gonna have to look into that max. Thanks bud

[@MudMotorsMax]

@@TBassFactory anytime man I enjoy your content

[@rodrigoelgu]

looks like fun, I have an expensive kayak with all bells and whistles but sometimes I feel like I should've had bought a bass boat with a gas motor and go fast but I really like my kayak and how simple they can be to bad I'm not a millionaire or id have them both.

[@TBassFactory]

Yep I agree have them all. I like kayak fishing but I also like being able to go the same places as my kayak but cover way more water. Its all about what kind of fish you wanna do. Sounds like you have it figured out rodrigo

[@benmudn]

Does the AlumiWeld rods work? All you need is a propane torch. An old trick we used back in the day was to remove the drain plug while going to let the water drain out. Just need to remember to put it back in right before you stop.

[@TBassFactory]

Yeah they sure do. They act just like solder. I’m definitely gonna have to seal it up with those Ben. Probably the easiest and cheapest way.

[@lupemunoz2674]

Hey, I got 2 of those predator motors for my Go Karts, 1 is new and the other is not but both run.... I need to try converting them like your motor.

[@TBassFactory]

Oh yeah Lupe you could easily do that if you already have them and put them on the pelican. I got my long tail kit on mudskipper. I think it was $350.

[@azlongtales]

Super easy to do check out our channel might help give you some ideas

[@DennisBohannan]

Downstream with these gets challenging.

[@TBassFactory]

Yep, gotta be careful going down. I’m sure can get yourself into some trouble quick

[@MudMotorsMax]

😂 no way man they turn just fine I can prove itkzbin.info/www/bejne/nXLImKWIfLVlbJY

[@joshuajennings5723]

Thats cool, I got a Canoe with flat back, With a ole 25 Nissan 4 stroke motor. Love your vids man! Them flat bed Botes the stuff

[@joshuajennings5723]

25 horsepower

[@TBassFactory]

Dang Joshua, I bet that canoe flies! Thanks bud

[@gonzalomanriquezjr864]

Man I just put the stage 1 kit on my predator 212. Haven’t taken it out on the water to test it yet but man the one you have sounds really good.

[@TBassFactory]

I liked the motor when it was stock but when I upgraded it was a big difference. It runs so much better with the upgraded carb too. You should take your out and test it Gonzalo

[@gonzalomanriquezjr864]

@@TBassFactory yeah I may go out this week. I didn’t do the carb upgrade so that may be the next move.

[@MudMotorsMax]

Try a Robertsons Torque Tube Looped Header they really add to it!

[@crainoxlong2338]

JB weld or some sort of calk that will stick and stay their pretty good.

[@TBassFactory]

That will definitely work Crain

[@ralphcantrell3214]

Thanks for the vid. I have the same Alumacraft, boat only in 12 feet instead of 10. It is a model 1232 - roughly 12 feet long overall by 32 inches wide at the bottom. Mine is close to the same year too, as it has the exact same version of the Alumacraft decal. It's a great creek boat, but a bit tippy, and I would hate to know I had to stand up in it at speed to steer the motor. Currently it has a new Suzuki 6 HP outboard, which planes it out just fine with 200-300 pounds of people in the boat, but not so much with 400. I am also researching which 196-212cc mud motors would best allow for sitting while running at speed. If I must stand, I would feel a need to fabricate some sort of sturdy rail to hang onto. I realize I'm late with a response, but since you asked - I have seen aluminum boat repair sticks, and used to have a few back in the 90's. They were green, about 3/8 thick by 12 inches long, and were made of some sort of semi-flexible plastic or rubber. The friend who gave them to me said you just pound the damaged area back to shape as best as you could, heat the area with a torch, and then melt these into any remaining leaks for a quick and easy, yet permanent repair. They were supposed to work really well on leaky rivets too. I was really proud to have them at the time, but never actually had to use one and have since lost them in a move, but I'm sure you could google around and find something similar. It still seems like a great, viable option to me. I know there are also coatings that can be applied to the bottom of jon boats that will seal up small leaks, as well as provide various other benefits, like noise reduction and less friction on any solid objects you might encounter and need to slide over. Anyway, Thanks again. 👍

[@TBassFactory]

Wow you definitely know your stuff. Thanks bud

[@MudMotorsMax]

Nice job man check out the Wildcat 223cc I have one on my 16 foot Coleman Scanoe RamX loaded down with my dog and gear I get 17 to 18 mph GPS certified. BTW That’s why I run plastic boats Rocks & this type of environment just is so hard on aluminum cuts like butter around my area in Montana. I got some HDPE boats coming!

[@TBassFactory]

Oh yeah that’s awesome max. I love that motor on my pelican bass raider and it can haul so much more than that jon boat.

[@MudMotorsMax]

@@TBassFactory good to know I haven’t been able to test out the John bowtie son get the first day the aluminum gets beat up around here

[@joenobles1086]

Hey while you're at home go to west marine and get J Flex clean the area and put that on the hole that's what I used

[@TBassFactory]

I'm not familiar with that joe ill check that out. Thanks bud

[@justingutierrez3343]

Man I was wanting to see you use that troling motor how that worked for that boat

[@TBassFactory]

I’ll have to do that Justin. I know it will be a big difference compared to the mud motor. Thanks bud

[@justingutierrez3343]

@@TBassFactory yes sir hey Derrick I just got a jon boat today for a hundred bucks too but I have no idea how to get her water ready do you have any tips like some coating to put on it or anything

[@willieharkless782]

Wow

[@TBassFactory]

Oh yeah. Loving that boat already

[@willieharkless782]

Happy for you I'm working on my first kayak it's a cobra fish-n-dive

[@hunterrollins5646]

My dad used to have a Jon boat with a mud motor he built out of a 670cc harbor freight engine that thing hit like 18,19 mph with 3 people and decoys and shit in it

[@TBassFactory]

Dang hunter. That was a sweet setup. With all of that in it and it did 18 was real good.

[@mattphillip9255]

Where'd you get the long tail set up? And how much?

[@TBassFactory]

I got that mud motor kit from mudskipper.com for around $350 it might of went up in price

[@crainoxlong2338]

Can you go through rapids

[@TBassFactory]

Yes I’ve ripped upstream and went fishing. That motor pushes a boat upstream where people tube through.

[@dhunterwetahook3995]

I have a 14ft flat bottom iv wanted to make an air boat with.

[@TBassFactory]

That would be awesome. You could go anywhere in that.

[@crainoxlong2338]

How shallow can it go, and imagine if you could upgrade to a 22 hp.

[@TBassFactory]

Inches of water. I’ve gone through ankle deep water no problem.

[@timwright7938]

Jb weld 👀

[@TBassFactory]

Yes sir! That stuff fixes everything. Used ol jb on a lot of stuff. Thanks bud!

[@timwright7938]

I keep it in my tackle box just in case

[@MPTX-be8qq]

Looks like you did a good job on that hole with the rock. But you messed up the paint job. 😀

[@TBassFactory]

Ha i sure did mess up that paint. Thanks bud

[@garygarcia9487]

Did u get a title on the boat or do u need 1 one for the motor

[@TBassFactory]

You can register the motor with Texas but from what I’ve seen there are not a lot of boats that have them both registered. Usually the boat gets registered with title and the boat id is for the registration.

[@robertmercer469]

What river u on

[@TBassFactory]

That’s the Guadalupe Robert

[@timothyroche6445]

where can I get a boat like th

[@TBassFactory]

Facebook marketplace is a great place to look timothy

[@timothyroche6445]

@@TBassFactory thank you and nice video, looks like a good deal for shallow water

[@justinmay3256]

Cant wait to see some bass caught out of that guy.....

[@TBassFactory]

Yes Justin, that is gonna be one fun boat to fish out of.