Tamiya Brushless setup...

[@chrisevaggelou8473]

As a kid I loved RC cars and as a father I would love to get my kids into the hobby and for me tamiya is a brand that offers so much and I am glad they came up with a brushless system. Lovely video.

[@rocpile]

I installed that motor in my Super Avante td4..... Brilliant indeed!

[@NotIT]

That's going to be rocking setup! Like others here, I also have a few RZ's and TBLM-02 10.5's running on TBLE-02S ESC's and even without a fan I've not had any problems or overheating problems (yet). I've got the 10.5 combo in a TRF-201 and a ReRe Boomerang and they both are awesome fun with that setup.

[@TAMIYALegends]

Not IT Excellent thanks so much for that information my friend, it’s much appreciated 😊👊🏻

[@RC4X4]

Nothing wrong with being all Tamiya. Great video. May have to try one myself.

[@TAMIYALegends]

RC4X4 Thanks for watching and leaving a comment buddy 😊👊🏻

[@IntegraDIY]

I’ve only owned two brushless systems, the old school Novak Super Sport with the 4300kv motor, and I also got the Castle Creations Mamba Max 5700kv back in 2007, and those things were wicket fast. The low maintenance and extra run time and more power made the transition to brushless incredibly good. Can’t wait to see more of this Tamiya brushless system, and see if it compares to the bigger brands in the brushless industry

[@TAMIYALegends]

Integra DIY Excellent 🤩👊🏻 Thanks for watching buddy

[@ianwinpenny1857]

Great video. I used this as a base to setup a DT03 with the same 10.5T motor, ESC and fan. It ran great and extremely smooth. I have since swapped the motor out into a Top Force with a Hobbywing ESC which like Glenn said are cheaper and put a 9.5T motor into the DT03. The ESC with fan is running OK, just have to be careful with the heat as I am over in Australia. It has not cut out yet which is a good indicator I guess

[@NordicRC]

I got the exact same TBLM and TBLE set up in my DT-02MS and Tamiya TFU and sensor cable. Runs fine. I think Tamiya rates their electronics very conservative. Also run a TBLM-02S with a 3S LiPo (and brushed silver can). And seen people go way below 23T without problems too. Of course the warrenty is out the window, but it’s also out the window with a 2S. Not a super fan of the double sided tape of the TFU but it seems to do the job. ... He he, I wonder why people always want to inform you that it’s a wrong choice. Same thing always happens with me. I mean, why not spend 30 sec to see if it’s a Tamiya-nerd/enthusiast that’s bought it before telling that one can buy other stuff. I got plenty of GoolRC etc etc brushless set ups and Arrma and Traxxas cars but still, often, I get told that GoolRC exists and Traxxas exists when I put up a video about a Tamiya project. I mean, it’s a bit pointless information for a Tamiya-enthusiast that’s showing a Tamiya project. Not sure if they actually think one can test a TBLM-02S without buying one, and instead a GoolRC? Hmm ... a mystery 😂😅

[@NordicRC]

Uhh, and I am looking forward seeing your timing test with the TBLM-02S. Have thought about trying myself, but never tried messing with the timing of any motor, so would love to see you do it first 🙂 ... Ohh, and if you ever want to try out a faster Tamiya brushless motor that’s about the same price as a TBLM-02S, then check out the TBLM-01 series. Sensorless. But a lot more choices available. Got a couple of TBLM-01 8T and TBLE-01 100A and they are really fast and punchy.

[@TAMIYALegends]

Nordic RC Visions Oh yes some of the comments I get are comical, I think people forget it’s just to make videos and have fun doing it 😂👊🏻

[@TAMIYALegends]

Nordic RC Visions Oh excellent I’ll go and have a look at that now 😊👊🏻

[@spenzalii]

Picked up a 10.5T to run with the TBLE02 in my bog stock TT01. No fan. 2S Lipo. Quicker than the 540 can (obviously). For what I'm using the chassis for (Euro Truck Racing) this is perfectly fine. Added a lipo battery check/alarm to be safe.

[@taimaishu-nao1922]

Also, to anyone saying that the Tamiya unit is expensive and you could get a cheaper, faster setup: Yes, you can and I’m not arguing that. The thing is, Tamiya really go out of their way to inform you on just how you should gear the motor in order to get the most life out of it. I doubt many other brands mentioned would go out of their way to include a detailed gearing chart the way Tamiya does. So yeah, this setup may seem like diminished returns on the surface. But for the money spent, Tamiya will make sure your first run with it won’t be the only one. Just because something is cheap, doesn’t mean it’s any good. *I’ve failed to mention the need for the TFU-01. You don’t need one UNLESS you’re running the 10.5T version! That’s the only reason Glen has one. Otherwise, it’s $30 you don’t need to spend.

[@ianwinpenny1857]

Good video. I have used a 17.5T TBLM02 motor and ran it on timing position 2 (2200kv) and increased the timing to max and a definite improvement in top end speed. Note I am new to all this but liking the learning curve

[@TAMIYALegends]

Ian Winpenny Thanks for watching Ian 😎👊🏻

[@ianwinpenny1857]

@@TAMIYALegends How do the motors run on Hobbywing sensored ESC or even LRP. I am finding it hard to get hold of fan units to put on the TBLE02s ESC. Can get them but very expensive ($100 AUD). I want to put the Tamiya TBLM02 10.5T into a new Top Force kit I got. Tried getting the TBLE03s ESC, but none around

[@TAMIYALegends]

Ian Winpenny I’ve actually been told these motors run way better without the TBLE02s 🤷🏼‍♂️

[@ianwinpenny1857]

@@TAMIYALegends Thanks. I still like the Tamiya stuff and got back into all this after finding my 1985 Hornet in the garage a few months ago. Upgraded ESC, servo and motor (Note original 540 stock motor fine along with rear dampers). Amazing how it still runs just fine, so hats off to Tamiya

[@ianwinpenny1857]

@@anyajenkins4611 I think with my very limited understanding that if you think it is the motor take it out and test it out of the car. If it runs OK then put it back in and look at the pinion and make sure it is flush with the spur and rotates correctly. If that is OK then the gearbox may be the problem and if you built the kit then you need work backwards and make sure it is correctly built. The motors TBLM02 if bought from a reputable seller are spot on in my experience

[@austenmclean7588]

I’m glad you mentioned about the super stock motor as I’ve got one but didn’t know my TBLE could run it with a fan.

[@TAMIYALegends]

Austen McLEAN Excellent have fun with it buddy 😊🚗💨💨💨

[@RCACTIONAUSTRALIA]

Nice 😎👍🏻 I’m looking at running one of these in my Terra Scorcher Re Re. Interested in seeing how it goes .

[@TAMIYALegends]

RC Action Australia Cheers Adam 😊

[@darinhintz5723]

I'm gonna do the same and keep it all Tamiya! Like your dedication :-)

[@ryainestudios0128]

Wow! Cant wait to see it mounted on your egress sir glen, got mine too on 15.5T. Super smooth not over power. Has the adjustable timming and works well with tble02s esc fan. Need to install a lipo battery alarm.

[@TAMIYALegends]

ryan lozada Excellent 🤩👊🏻 Thanks for watching buddy

[@zosozoso2]

Hey Ryaine RC, do you run the 15.5T on the EGRESS? And, what does the adjustable timing do?

[@camilleriap2]

If you are going to start running brushless you should look into getting a motor analyzer. When you adjust the timing you want to try and keep the motor draw around six amps. If you increase beyond that you will create excessive heat and shorten motor life and you will not gain much in performance. A motor analyzer is key. It will tell you all the information you wish to know, kv, timing more accurately than the markings on the can as well as the amp draw.

[@TAMIYALegends]

camilleriap2 Awesome information thank you 😊👊🏻

[@DavidWilson-vv6hm]

Great video Glenn. Being a Tamiya geek too I wanted to keep my brushless set up Tamiya but the cost just put me off. Really interested to see how this runs. Maybe I’ll get one after your runs.

[@TAMIYALegends]

David Wilson Yep the price is a real issue unfortunately 😞 Thanks for watching buddy

[@RCRetro]

Great video... FYI, I run the tble-02 esc with and BZ super stock motor which is very similar to the RZ in my Blackfoot on Lipo 2s with no fan and never had an issue with it. The Egress is going to boogie with that motor. Looking forward to seeing that video.

[@TAMIYALegends]

RC Retro Excellent thanks for letting me know buddy 😊👊🏻

[@StewMac570]

My castle ESC can run motor tests and work out KV. I have a trackstar 10.5 motor with adjustable timing. So I can run a motor test on a 10.5t motor and give you some data on what happens.

[@TAMIYALegends]

Stew- Mac Oh wow yes please, that would be great Stew 🤩👊🏻

[@StewMac570]

@@TAMIYALegends kzbin.info/www/bejne/rZ6rmKV9mM9njpI Not as great as i thought it would be....

[@19Marc79]

Just today I ran my Egress (formerly a shelf-queen) with 3150kv sensored Robitronic Platinum motor and Robitronic speedo on 3s Lipo => It runs so SMOOTH, mate....It is a dream-come-true compared to any brushed motor 👍 👍👍 The stock pinion was way too big for this setup. I use 15t pinion (could still be 1 or 2t smaller for my taste...) which gives a very nice top speed ! More than that is not needed in the Egress in my opinion. I can only recommend the analog Reely S-0090 Servo with metal gear (15 bucks). And one advice for your Egress-build: Put a lot of semi thick grease on ALL gears (front&rear) !!! To install motor/pinion correctly: Push motor-pinion-unit firmly to the spur gear, tighten lower motor mount screw mildly, apply full throttle (spur gear will push pinion slightly away), tighten both screws firmly (with previously applied thread-lock-paste). => Looking forward to your running video of your Egress, mate !!! It is my all time favorite of the Tamiya RC models 👑

[@TAMIYALegends]

19Marc79 Thanks for the great information my friend, it’s much appreciated 😊👊🏻

[@Paul__FC]

Not sure HOW! I could have missed this.

[@TrueToad]

I hope to set up my TA08 with Tamiya electronics, I have the 10.5 but waiting on the ESC due to backorder.

[@purplepidgin]

I’m running a a Tamiya 15.5 brushless on my all Tamiya TT-02

[@markgreenhalgh8344]

I've ran the rz with the TBLE-2 esc ( with the fan) and it runs fine

[@TAMIYALegends]

Mark Greenhalgh Oh that’s good to know Mark 😊 looking forward to see what this motor runs like 👊🏻 Thanks for watching buddy

[@robsteel8318]

I ran the same combo without the fan in a hotshot and it would thermal cut out after about 5 or 6 mins.

[@TeddyWhite]

Can’t wait to see this in the Egress - crank it up 😀

[@TAMIYALegends]

Edward White Absolutely crank it up lol 😂 Thanks for watching Edward 👊🏻

[@CmwSpeedrunUk]

Tamiya god has spoken i cannot wait to see this in your RCs , really interesting video buddy get that in one of your buggy’s boom 💥 lovely jubberly

[@TAMIYALegends]

CMW Chris woodward Cheers buddy 😊👊🏻

[@toreb7692]

Might have to try that in my Neo Scorcher. Exciting :)

[@TAMIYALegends]

Tore B Cool 😎👊🏻

[@iainlee4680]

Great video!, i will be purchasing this exact set up for my tt-02. I currently have a super stock rz and a hobbywing 1060 esc which works great so will be interesting to see if the brushless set up will be faster?.👍🏼😎

[@markhamer9685]

Brilliant channel Question I have a Nissan king cab I can not find tyres for it.any ideas where I could buy some Many thanks

[@markysmodsandmodels1163]

Great vid as always Glenn buddy. 🙏🙏. Have to agree that they are expensive. And as you have said there's plenty of cheap combo sets out there. But I bet that'll last 10x longer than my Gool setups. Also you are a big nerd... 🤓🤓. But we all are! 😂😂. You can't beat having full Tamiya installed in your pride and joys to keep em authentic. 😉😉. Looking forward to some run vids on it buddy. 😊😊

[@TAMIYALegends]

Markys Mods and Models Thanks for watching Mark, very much appreciated buddy 😊👊🏻

[@markysmodsandmodels1163]

@@TAMIYALegends you're welcome mate. Keeps me sane at work during me lunch! 😉😉👍👍

[@markhollinshead5795]

ive run the same setup i my neo scorcher ran well and super smooth pulls way better on 2s

[@TAMIYALegends]

Mark Hollinshead Sweet Mark, I’ve had a few comments like this now, really looking forward to getting this out for a run 🤩🚗💨💨💨

[@jasonvicars226]

Brushless is a little different. You kinda adjust timing to grip level. For playing around....6amp and high traction around 8amp. Then gear for the track. Bashing...... Motor temp. Gear for track and having fun...motor temps!😊 Keep up the videos!

[@TAMIYALegends]

Jason Vicars Excellent thanks for that information Jason 🤩👊🏻

[@jasonvicars226]

Thanks for the info you give out on your channel! Always love learning something new from my favorite brand to build first and race second! Brushless motor dynos are getting cheap if you don't have one already!😊 Do quality assurance in electronics manufacturing so i have some ideas........🤔😀! Thanks again!

[@charlesburlison-rush1281]

Great video and got me think I may go with the TBLM-02s 10.5T for my new Top Force EVO which I have just purchased and it now comes with the TBLE-04s ESC. Ideally I want to stay with using Nimh batteries for now so how would a 3000mah stick cope using standard gearing?

[@jayess397]

I think the TEU 105BK is brushed only, with a 27t limit. And the 106BK was/is for twin motors(?).

[@TAMIYALegends]

JayesS Great information buddy, thanks for letting me know 😊👊🏻

[@adrianharrison5208]

I’ve also wanted to try the Tamiya brushless motors just to see if they are worth the extra money. Watching this one

[@TAMIYALegends]

adrian harrison Excellent Adrian 😊 Thanks for watching buddy

[@Steve-rk6lg]

Got myself a super stock, didn’t know about the fan so just ordered one from tony 👍🏻

[@TAMIYALegends]

Stephen McClune Excellent good old Tony’s Tamiya Parts 🤩🤩🤩 Thanks as always for watching buddy 👊🏻

[@davidturner2365]

Gunna be cool in the egress carnt wait to see it running 👍👍👍

[@TAMIYALegends]

David Turner Me too 😊🚗💨💨💨

[@stephenmanley4097]

That will be interesting to so how it performs 👌

[@TAMIYALegends]

stephen manley Thanks for watching Stephen 😊👊🏻

[@UlisesBatalla]

Can I have the part number for the fan unit? I have about 7 of these ESCs and I need fans. NEVERMIND DUHOOOOOOY!! LOL

[@taimaishu-nao1922]

Mate, I watched this video before caving in and buying one. What’s weird is how Tamiya US states that the TFU-01 is discontinued and the only place you can get one is from Hong Kong. I have them on both of my cars but yeah, seems like an oversight to not make them like the TBLE-04S which allows the use of ANY 25x25mm fan with JR connectors. So far I’ve loved the 10.5. It’s not a perfect motor but if you give it full beans, it will go like a hurt rat! Just gotta really read the manual that comes inside the box of the TBLM-02S; DO NOT DISCARD OR YOU’LL LUNCH YOUR NEW MOTOR!!! Gearing is important with these because you don’t want the ESC to go “pop, bang, hiss”, hence why I say DO NOT throw away the manual that comes with it! While on the subject of gearing, one must be careful if running a 68T or lower spur gear. Too high or low a final drive can again cook the ESC! I almost ran a 27T pinion and 64T spur on my TT-02, which is the lowest drive I can go before the ESC says “no way”. I currently run 22T pinion and 68T spur and the final drive is right in the middle of the Tamiya specs for that spur gear. Thanks Glen and thanks for this very informative video.

[@MaxDellOrco]

wich esc you mounted in the end?

[@CarminesRCTipsandTricks]

Not Nerdy Glenn.... Just true to your Channel concept! 😉 I could never afford a Tamiya Brushless Motor, so I'm stuck with the Korean Knockoff CRAP. In me Racing experience, advanced Timing adds top Speed. Also adds HEAT. Be careful how far you go. Me Mate Mark Bryan from Midlands, usually runs 13T Brushless Motors on the TBLE-02 with zero problems... But I believe that it's more like a 23T Brushed. Carmine ✈🚂🚙

[@CarminesRCTipsandTricks]

Sticky Tape on something that gets hot.... Hmmmm....

[@TAMIYALegends]

PoorManRC Mark has a great channel 🤩👊🏻 Thanks for watching and commenting 😊

[@RCHobbyShed]

So this is the video I couldn't find a week ago. 🤣. That 10.5t will be plenty powerful, you'll have fun with it! 👍

[@TAMIYALegends]

RC Hobby Shed Lol 😂 Mick Have you ever played with the timing on a brushless motor?

[@RCHobbyShed]

@@TAMIYALegends I haven't as yet but I've never really needed to. You'll find the 10.5t will have plenty of grunt. I'm sure it'll have a tad more grunt with advanced timing but way less than just adding more S's to your battery. 👍

[@CharlesGarnierRC]

This esc is not bad, but there, as you said, many drawbacks that I hope will be corrected in the next itteration: - 50% speed in reverse. - sensored only for brushless, no sensorless (I really like the fact it can do both brushed and brushless). - No program card. - overheating (I have the fan as well, cool stuff, but my motor stoped oftem because of temp, even with the nice fan option). - turn limits in both brushed and Brushless are too high, especially for brushed. If all those stuffs are changed, it mighr be a big hit!

[@cmarshall4559]

I tried this setup a year ago as I had loads of the Speedos and like you wanted all Tamiya. It ran ok but not better than brushed and was way too complicated for me. Went through a puddle and it all went dead so I'm back to technigold and ni cad😃

[@TAMIYALegends]

C Marshall Love it 😊 back to proper old skool gear 🤩👊🏻

[@cmarshall4559]

TAMIYA Legends yeah I learned my expensive lesson. All my lipo's packed up too🤕keep it simple. Loving running a hornet lately and as a kid I hated them.

[@jonsayell1487]

I run my rere Hotshot with a RZ motor and use a TEU302BK controller, but I don’t run lipos on it

[@TAMIYALegends]

Jon Sayell Excellent Jon, do you know what motor limit that ESC has please? Thanks for watching buddy 😊👊🏻

[@jonsayell1487]

TAMIYA Legends pretty sure it only 23t, works fine with the RZ. I have some instructions.......somewhere lol

[@rcalltypes8230]

The Tamiya TBLE01 ESC used in the Super Levant, has a 8t 4410kv motor. Look into this ESC, if you want a cheaper alternative to Transpeed. 😎

[@TAMIYALegends]

Rcalltypes Oh interesting thanks I’ll have a look at it 😊👊🏻

[@rcalltypes8230]

@@TAMIYALegends It’s Tamiya’s 100amp ESC, I’ve had mine since 2010 when I purchased the Super Levant. 10 years old running on 2s 7.4v lipo, for the last (I think 7 years) I changed the 8t 4410kv motor for a Leopard 3570kv motor so I could run on short grass without overheating. So far so good👍🏻

[@alfredyost7972]

I did something like this in the Tamiya Porsche Cayenne SUV. I used a Tamiya radio, a Tamiya servo and a Tamiya ESC. The ESC came with the kit. I got a stock Tamiya brushless motor. I just got the a 17.5 brushless motor. I wanted to go with a stock motor because the gears in the kit are plastic. I did not want to tear up the gears in the car. How did it work? It was okay, but not great. The build on the Tamiya brushless motor is fantastic. It even looks great. Also remember that Tamiya uses sensored and not sensorless system. I would say that the Tamiya radio was probably below average, the Tamiya servo was below average. The motor was good. The include ESC is also average. Thoughts?

[@sonny_z900]

Nice, I want one now to. :-)

[@jamescollins5274]

I'm confused. the Tamiya brushless TBLM motors appear to have lower RPM than the Superstock (26,500). ? So they are slower than the brushed Superstock? 🤔

[@darinhintz5723]

Think I can use the newer TBLE 04S with the 10.5??? Seems the new limit is 15.5T

[@tamiyafrog3220]

I didn't know that speedy could handle a 10.5 cool👍

[@TAMIYALegends]

tamiya frog Yeah I didn’t tbh until I did some digging, should be interesting to see how it goes 🤞🏻 Thanks for watching buddy

[@camrowdrone6497]

Always wondered if I go brushless on my Grasshopper will the gears take it, as no metal gears available I’m sure 👍🏻

[@TAMIYALegends]

Cam row drone Yes as long as it’s fully ball raced it takes it, problem is getting the power down lol 😂 Thanks for watching 👊🏻

[@camrowdrone6497]

TAMIYA Legends Thanks for the advice, mine is only plastic bushing 👍🏻

[@flixnetwork2788]

am i better of with this for my holiday buggy or a traxxas brushless motor setup

[@adammurphy4154]

Hey do you know if the 10.5t Tamiya TBLM-02s motor would work with a Tamiya TBLE-04s esc? great video by the way 👍

[@bradkalman2353]

I want to see you have a speed run Tamiya.

[@TAMIYALegends]

Brad Kalman I’ve got one, the TA-05R 🤩🚗💨💨💨

[@bradkalman2353]

@@TAMIYALegends I haven't seen you do any speed runs with it that I can remember and you are not to old.

[@TAMIYALegends]

Brad Kalman No point touching it yet buddy, Winter so everywhere’s covered in salt 😞

[@RC4X4]

How is the setup? I was thinking of doing one in a Dark Impact. I'm with you, all Tamiya setup. I use Traxxas servos in all my new builds and Tamiya esc or HobbyWing 1060 esc's.

[@TAMIYALegends]

It’s great tbh no problems at all, it runs great 😊. The issue is the cost of this set up unfortunately 😤. You can get the same or better set up much cheaper. We are paying for the Tamiya branding 😬😬😬

[@Leonsrchobbys]

very cool my friend all my tamyia are all brushless more fun but i do keep All original electrical parts and motors but mine are the cheap combos i carnt afford tamiya ones plus i would need Ten systems😂😂👊😊👍🇬🇧😎

[@TAMIYALegends]

Leons rc hobbys Yeah that’s the downside of this kind of Tamiya stuff, it’s too expensive 😞

[@odomandr]

Have you tried one of the new Tamiya 04 esc?

[@KenyukoIMAdventure]

Are you comfortable running 3s batteries on a crawler with a Tamiya “super stock” TZ motor? I am running a 28T pinion, with a 320A “new rain” ESC on a CR-01 chassis… tell me what do you think?

[@bradkalman2353]

Nothing should be too fast for you Glen

[@TAMIYALegends]

Brad Kalman I’m getting old Brad 🤩👊🏻

[@mikeymike3240]

I do enjoy tamiya stuff, sic sic sic, so do I, except for the prices. lol

[@TAMIYALegends]

Mikey mike yes I know what you mean 😬😬😬 Thanks for watching

[@guppylove7200]

Hi bud I’ve dug my old tb01 wrc focus out the loft I want to upgrade the motor and batteries any recommendations it’s officially 25years old last week thanks bud

[@markysmodsandmodels1163]

Ps as far as I'm aware the TEU ones are the predecessors of the TBLE ones buddy.

[@TAMIYALegends]

Markys Mods and Models Yeah I think you’re right, think there only brushed as well 😬

[@adamgoddard5765]

I’m gonna run this set up I have lab is delta xv-01 set up running that esc will I need the lith alarm I will be deffo fitting the fan to the setup why run the 16cm cable ??

[@AqueousShunt]

Might do the same thing with my Neo Fighter. How did it work out?

[@acearaya7569]

Just discovered you .. thank you Glenn!! Just purchased a DT-03 2wd. Wanted to add all Tamiya brushless system that can handle 2s-3s Lipo. Is this possible? Or must I use non-Tamiya brand for brushless motor and ESC ?

[@martinhsrc6699]

Just watching this as got a Tamiya TBLM 15.5t on order for my Egress. Did you run your 10.5 in the Egress? The video I found you say you’re running the BZ.

[@TAMIYALegends]

martin harrell No I ran it in my Durga videos 👊🏻

[@martinhsrc6699]

TAMIYA Legends ok thanks

[@jodyblackwell9012]

I'm just wondering if it is worth the extra money if one is not into speed but just driving round on a tennis court would it be worth spending the money on brushless set up

[@TAMIYALegends]

Jody Blackwell I’d say yes Jody, you could get a 17.5 brushless combo for not a lot of money, run it on 2s and you have great (not crazy) performance, a motor you don’t really need to touch and massively improved run times, I’m talking about 25 minutes+

[@mitchsmith8980]

Have you run the super stock rz on anything yet? I just put one in a FAV

[@TAMIYALegends]

Mitch smith I’ve done a video on that motor in my DT-02, it ran great on both 2&3s Lipo. But since then I’ve fitted bearings, so just waiting on better weather to see if any improvements 🤩👊🏻 Thanks for watching Mitch

[@mitchsmith8980]

@@TAMIYALegends thanks for the reply, ill check it out.

[@billdelong]

Does the ESC support any 10.5T motor or just the TAMIYA motor? Have you tried a sensorless motor too, like a generic 3000KV motor?

[@TAMIYALegends]

Bill DeLong I’ve not tried another motor, but I would imagine it would without a problem 🤔. I’m pretty sure it won’t run a sensorless motor though, I’m sure I read that somewhere 🤷🏼‍♂️ Thanks for watching buddy 👊🏻

[@billdelong]

@@TAMIYALegends, much appreciated, I found another video here showing support for other brands which is nice: kzbin.info/www/bejne/p16VcnRmfciVnbc

[@nickrobertson2450]

Yes it does. I have speed passion sensored brushless 17.5T, 13.5T & 10.5T running on the tble02.

[@nickrobertson2450]

If you leave the sensor wire out the tble02 just beeps & winks an LED fault code at you. So no it doesn't seem to run senseless motors.

[@anthonyfoulk3847]

How many turns does it have?

[@raleighburner1589]

I have the tblm o2s 10.5 with the tamiya esc but it runs the car faster in reverse and nothing I do alters that ...what's the problem

[@TAMIYALegends]

Raleighburner15 Hynes That’s really odd 😬 Have you reversed your throttle on the transmitter and checked if it’s set right 🤔🤷🏼‍♂️

[@raleighburner1589]

@@TAMIYALegends I changed the setting on the controller and altered the timing on the can and you can't reverse the wiring because it won't run at all still no luck it just runs faster in reverse

[@Raptor50aus]

Will tamiya drive train handle brushless ?

[@TAMIYALegends]

Raptor50aus Yes I haven’t had any problems with any chassis so far, but I don’t really drive them that hard tbh. Thanks for watching buddy 😊👊🏻

[@jamesbailey5008]

What is KV?

[@MrSteveESQ]

Think that motor is perfect for the set up you're running.

[@TAMIYALegends]

Steve Moon Yeah nothing crazy for the Egress 🤩👊🏻 Thanks for watching

[@EugeneRCDrezgalovo48rus]

СУПЕР!!!💪😉👍

[@TAMIYALegends]

Евгений RC Drezgalovo 48rus Thanks for watching buddy 😊👊🏻

[@EugeneRCDrezgalovo48rus]

@@TAMIYALegends пожалуйста)))👍💪😉

[@saripudinahmad9550]

Malaysia time now... 01:39 am morning time now 23/April/2020

[@domebucket8626]

keen

[@TAMIYALegends]

Dome Bucket You certainly are my friend 🤩 Thanks for watching buddy 👊🏻

[@domebucket8626]

@@TAMIYALegends what would you recommend for a awd rally platform thx

[@TAMIYALegends]

Dome Bucket The XV-01 is supposed to be the best chassis, although I’ve not had one yet. But I know the rally guys love it 👊🏻

[@domebucket8626]

@@TAMIYALegends thx mate love from down under

[@ford351w83]

hi every one I need a little help out here looking for a gear on a very old Tamiya 1/16 M4 Sherman tank its a two motor single transmission drive train I striped out the gear between the two motors when I was a teenager my father bought this tank when he was a teenager need help on where to look if any one has help would be appreciated.

[@leehurst6922]

The other Speedo is the precursor to the 02. It is only washed

[@TAMIYALegends]

Lee Hurst Washed???

[@mattijah_s]

I've purchased the TBLM-02S from Japan for 38€ while here in EU it sells for 85€. Ridiculous

[@Gene_the_OG_Raver]

What the hell are you going to put a 10.5 in?

[@TAMIYALegends]

Gene It’s going in the Egress, but it’s pretty tame tbh at 3300kv! My other cheap combo I have is 9t 4370kv, so it’s not going to be as quick as that one, so should be interesting to see how it runs 🤔🤷🏼‍♂️

[@mitymike]

Stuff it in the mad rabbit and blow the tires off😁

[@TAMIYALegends]

mitymike 1996 Oh that’s getting the 9t 4370kv fitted 🤩🚗💨💨💨💨

[@chloedevereaux1801]

damnit 2nd... :D

[@TAMIYALegends]

chloe devereaux Lol 😂 come on you need to get this sorted out for the next video 😂👊🏻

[@chloedevereaux1801]

@@TAMIYALegends no worries :D

[@chloedevereaux1801]

@@TAMIYALegends here's a quick one for you.... did you know tamiya make a sports tuned version of the venerable 380!!!!! its faster than a stock 540..... could make an interesting vid .. :D

[@TAMIYALegends]

chloe devereaux Yeah I’ve read about it 🤔. As you say I need to look into that 😊👊🏻

[@chloedevereaux1801]

@@TAMIYALegends it'd get a lot of views :D

[@outbackrcaustralia4895]

Great video again! Check our RC HOBBY SHED on KZbin, He has a great video on the Tamiya cooling fan. He also has a bunch of great videos worth watching. Thanks again for the video mate, looking forward to seeing how the Tamiya brushless motor runs, 🦘🇦🇺

[@TAMIYALegends]

Outback RC Australia Oh yes Mick, he’s a buddy of mine, love his channel 🤩👊🏻

[@outbackrcaustralia4895]

@@TAMIYALegends Yeh he also produces awesome video's 👌

[@RC-ty5ym]

Only 3370 kv?!? A proper tuned 10,5t motor can spin 4000 kv+9

[@TAMIYALegends]

rc guy Yeah as I said it’s certainly not earth shattering performance, but I’m curious to see how it runs 🚗💨💨 Thanks for watching 😊👊🏻

[@HW-Origin]

Every time i see this "cooling solutions" i have to bang my head on the desk... damn is this a bad construction and inefficient. The already very small cooling area is covered in more plastic.... 42x42mm heatsink and fan directly attached would be much much better. But it's not only a tamiya "problem"