Tamiya MF-01X Mercedes 85 MPH

[@RCBirds]

Congrats on the 85. This car's amazing fast👍

[@JoevsRc]

@RCBirds Thanks! Kinda getting use to it

[@AdventureTimeRC]

That is moving for this thing

[@JoevsRc]

@AdventureTimeRC Thanks! I think I have pused the speed brick to its limits lol

[@BasBoyRC]

That was stable runs and 85mph.

[@JoevsRc]

@BasBoyRC Thanks! I am getting better with it. I just can't run it into the wind lol . Weeeeeeee! Crash

[@coygtrc]

That's an awesome run, Joe 😮 Congrats 👏 Entering the 80+ club, well done 💪🤝

[@JoevsRc]

@coygtrc Thanks! I am putting the high speed gear set in as we speak. Hopefully I can get one last pull and pray

[@reitplace4765]

85!!! nice Joe I was wondering when ya would break her in.. Good stuff brother great run wind and all...😎🤙 We always go one more.. Thats how ya break thatbarrier

[@JoevsRc]

@@reitplace4765 Thanks! The one more always makes me laugh 😃 😀

[@poorboysrc]

The fastest speed brick in all the land. Haha. Nicely done, Joe!

[@JoevsRc]

@@poorboysrc Speed Brick Go!

[@TeamJunkYardDog]

Congrats on 85! The wing helped a lot I think. Well done!

[@JoevsRc]

@TeamJunkYardDog it did. I think on the crash, I was heading into the 15mph wind.

[@cw-01creations46]

Congratulations with the 85mph Joe 👍 Won't be long and you'll be cracking the triple digits 🤘 Well Done

[@JoevsRc]

@cw-01creations46 Thank! Not sure I have the time to tune it ti make 100 . But I will try. Your video will be out this week!

[@cw-01creations46]

@@JoevsRc Excellent 👍 You could do a personal best after the competition but I'm sure you've got some Aces up your sleeve for the next run 👍 Looking forward to seeing you're unwrapping video when it airs on the Big Screen 😀 👍 😄

[@jemshobbies]

Congrats!!

[@JoevsRc]

@jemshobbies Thanks! I should not have did a run heading into the wind lol

[@herbieRCpaints53]

Very nice Joe , 85 Awesome 😎😎👍👍👍

[@JoevsRc]

@@herbieRCpaints53 Thanks! It is a handful

[@AlToneTech]

Awesome. Way to end the Challange. 👍

[@JoevsRc]

@AlToneTech Thanks! I will try my hardest to get one more run in.

[@scaleworksRC]

Who'd have thunk something like this would be so fast and stable? 🤯 ..Outstanding job and big congrats on that 85! 🎉 WOOP WOOP

[@JoevsRc]

@scaleworksRC Thanks! Lol I never thought I would get that brick body moving 😅

[@JoevsRc]

@scaleworksRC Thanks. It's better now but it took a few crashes to learn

[@scaleworksRC]

@@JoevsRc The body doesn't look that bad either! My Ford GT looks like it was thrown off the Grand Canyon and survived 2 wars, but she's still running 😁👍

[@JoevsRc]

@@scaleworksRC lol 😆 😂 🤣. Mine has holes in all four corners. It's looks good at 85 mph

[@rc_michi]

85 on stock gears is astonishing, especially with that brick of a body. Well done! 👍

[@JoevsRc]

@rc_michi Thanks! I just put the high speed in with a 28 pinion. Hopefully I can get a few more mph. But I think the body might be holding it back a little. But I want to keep it.

[@AddamsPlayground]

Man it was flying! It looks and sounds super smooth! I had mine out today and it is still a twitchy tumbleweed but i did get legit passes this time and it came home in one piece so I aint gonna complain! LOL! Congrats on the 85mph!

[@JoevsRc]

@@AddamsPlayground Thanks! I can't wait to see your run

[@c.k.hobbyshop3351]

Very cool 😎 Very fast 👌

[@JoevsRc]

@@c.k.hobbyshop3351 Thank you! It probably has just as many miles on the roof as the tires lol hahaha

[@mccoy79productions66]

What an awesome share!

[@JoevsRc]

@@mccoy79productions66 Thank you. It was moving!

[@BriansRCStuff]

That thing sounded like a jet going 85 mph! Awesome job!

[@JoevsRc]

@@BriansRCStuff Thanks! I think the brick body is my biggest problem

[@SakuraRcJapaner]

That thing broke speed limit by like 50?😂🚓Dont know if the cup will issue a ticket for that tiny little thing.... Ok enough with jokes, but congrats for the great run!! So running at the same gear ratio with my car and achieved a lot faster record. I guess the battery and motor did make this difference Mines were possiblly the cheapest available on the market

[@JoevsRc]

@sakura_grx I am running stock gear set with a 26 tooth pinion. 4800 3s lihv pack, mamba x speed control and a ruddog 3.5 turn motor. Looking at the logs and it has more to give. Don't know if I will have the time. I think you need a longer road way and you will have better speeds.

[@KPtain_RC]

This is an incredible, cool project. I like the G63, but I've never seen it as a racer before! Good job 👍 👍 👍

[@JoevsRc]

@@KPtain_RC Thanks! I like to be a little different 😆 🤣 😂

[@JoseDiaz-z1r]

Niceeeee

[@JoevsRc]

@@JoseDiaz-z1r Thank!

[@PRESTINERCs]

New subscriber! #500! Congrats!

[@JoevsRc]

@@PRESTINERCs just seen this comment! Thank you! I will come and check your channel out

[@Chuckyshobbies]

Great run. Im running the same protek pack for a small pack it works great. Im hoping to get out and run one more time befor then end. There are quite a few getting in the 80s now its great to see.

[@JoevsRc]

@Chuckyshobbies Thanks! Tonight I will play with the gears and try and get one more run in. Good luck with your next run

[@JoevsRc]

@Chuckyshobbies I gave a problem to with this battery now . It won't charge or discharge. It works in the car. It shows 4.166 v per cell and at 98 percent. Ever have this problem? This was the first time using this battery

[@Chuckyshobbies]

@@JoevsRc sounds like a charger problem

[@JoevsRc]

@Chuckyshobbies it charged my other 2s and 3s packs and lihv packs. It also won't discharge on my separate discharge. I tested 6 different batteries on the charger and then on a separate discharger. Everything work perfectly. Only when I put this protek 3s.on I get an error. And won't discharge

[@Chuckyshobbies]

@JoevsRc that's crummy I haven't had that kind of bad luck with mine. And it shows voltage on a cell checker for each cell and there all ok.

[@FastFreddyRC]

That’s awesome! Nice job! I have no idea how you’re even controlling that though lol even at the 122MPH clocked by jack o trades I don’t know how you see it let alone steer it! lol

[@JoevsRc]

@FastFreddyRC Thanks! I use contact foam tires, 2 degrees toe out in the front. 90 weight oil and stiff springs. Most important I have the steering rate down to 30 percent

[@rc-diy7864]

hello very good 🤩😍

[@JoevsRc]

@@rc-diy7864 Thanks! It's been a learning experience

[@ungurdani8346]

Salut my friend super car super video subscribe subscribe 🚗🚗👍👍🤗🤗

[@JoevsRc]

@@ungurdani8346 Thanks! I will see ya later!