TANGO MSR FAMILY

[@biocrx1936]

Got my 1-6 for Black Friday. Installed it and zeroed it recently. Love the glass and how easy it is to tune. Definitely getting another for the new sbr build 🤘

[@j.p.4541]

Would you say the glass is a true 1X or does it look slightly magnified?

[@demerson1990]

Is there enough room for a spare battery in the turret cap?

[@biocrx1936]

@@j.p.4541 yeah brotha it’s pretty on spot.

[@biocrx1936]

@@demerson1990 I haven’t checked honestly. I’ll check later today

[@jamestsiang3548]

Got the 1-10x last month, what a quality scope for the price! Bright optics, nice illumination, like the precision of 10x. Thank you

[@paulbarnes2752]

Just bought one of these. Not much experience at all with optics, but this seems like a quality scope at a great price. I'm impressed by the optic clarity.

[@Agent_Missouri]

I got the 1-6 and love it. Great job guys! The illumination could stand to be a little brighter but I’m not going to be super picky. I’ll take clear glass over brightness any day and y’all nailed that.

[@veevans01ify]

I bought the 1x6 and put it on my ZPAP M70 recently. It is a great optic. Great glass for the $260 price that I paid for. For me The illumination works great and can be found quickly with both eyes opened. Some of my gun friends that work at my local range shot it also and liked it a lot over a traditional red dot. That’s with and without illumination.

[@uahhak8424]

Who had it for $260.00 that's a deal

[@gh0st-6]

Got one of these a month ago. Fantastic for the price. I only wish the markings were etched and subdued.

[@claytonjohnston25]

Assuming it’s a SFP optic?

[@polishness]

@@claytonjohnston25 yes its SFP

[@msims1250]

I just picked up a 1-10 today. I can’t wait to try it out.

[@leroymoss4197]

How do you like it?

[@bobn3404]

How is clarity at 10 power? Corner to corner? How much does the eye box shrink from 1 to 10 power?

[@raygumm]

Just ordered mine today. How did yours work?

[@---tx9xx]

Also interested in hearing, how is it? Specifically, how does it work as a 1x optic and at max?

[@dewrunning]

When will the 1-10’s be available ? Not on website …….

[@averagesouthtexan5269]

Gun mag warehouse has them apparently

[@pewsnob]

Euro optic has them for preorder

[@Dick_Kramden]

Palmetto state armory

[@mj23polairs]

Any plans for a moa or mill based reticle that is not a BDC? More or less a small grid reticle with subtentions

[@ACOGLMT556]

Im really interested in the 1-10 but who has the 1-8? can't seem to find them.

[@Agent_Missouri]

I have 1 on back order. Excited to get it and try it out

[@ismarwinkelman5648]

Let us know what you think! 👌🏾🇳🇱😎

[@Agent_Missouri]

@@ismarwinkelman5648 I got the 1-6 for my 5.56 AR. That’s the only thing my vendor was able to order. If it’s awesome I’ll get a 1-10 as well when they become available for my .308

[@alldaveallnight4581]

I have the 1-6 x 24. I found it on sale for $249 and couldn’t pass it up. It’s a killer scope. I love it.

[@Agent_Missouri]

@@alldaveallnight4581 everyone ive talked to or read about really seems to be happy with it. If it’s anything like their red dots or prism optics I’ll be happy, I have a Romeo 5 on my ak, and a bravo 5 on my 300 blk ar. Love them! Super clean and clear

[@alldaveallnight4581]

@@Agent_Missouri I have a Romeo 5 as well. The Tango MSR replaced it. Different optics for different applications. The red dot for inside 100 yds and the Tango for anything past that. I’m sure you’ll love it! 👍🏻🤘🏻

[@robertdole5391]

Will they come with BDX 2.0 integration?

[@MegaBuckmark]

Whats the difference in the tango msr and tango dmr 3-18?

[@krisg8936]

When will the msr 1-10 be available I already have the msr 1-6 but I want the 1-10 for my scar 16

[@Dogsoldier12B]

What do you think about the 1-6. I'm on the verge of buying one. I heard the subtintions don't line up with actual ranges. It's going on my 12.5, a 300m gun so not sure if it matters. 🤔

[@AlabamaPilgrim333]

Show the reticle in a little more detail next time.👍🏽

[@iMatthew98]

Got my Tango 1-10 yesterday. Where is the information for the reticle?

[@---tx9xx]

How do you like it so far? Specifically, how is it at 1x, at and max?

[@narb3h]

Anyone know when the 1x8 is coming out?

[@normcullen4857]

what happened to the 1-8 and 1-10, they are no longer on the Sig Web Page

[@Keep_It_Loaded]

Just pre-ordered a couple 1-10s for work, can't wait for hands on experience.

[@WildWeasel4570]

Where did you preorder them at?

[@Keep_It_Loaded]

@@WildWeasel4570 direct from Sig but I'm a dealer though.

[@fo8716]

Any idea of the weight on the 1-10x?

[@Keep_It_Loaded]

@@fo8716 21.12oz w/ flip caps on. It's 27.2 optic and mount.

[@fo8716]

@@Keep_It_Loaded thank you sir.

[@nickferzacca1786]

Can't seem to find the 1-8 or 1-10 anywhere... Anyone know a price point or where they're available?

[@randyestremera2418]

I ordered 1-10 off amazon for 469 yesterday

[@PierreKerbage]

MSRP and availability ETA?

[@MrSalty-pg9ty]

I paid $249 for the 1-6x24mm at Sportsman’s Warehouse on Black Friday

[@PierreKerbage]

@@MrSalty-pg9ty Thank you so much for this. WOW - that is extremely reasonable for that quality. And it's SIG!

[@the_spaartan5372]

When is the 1-10 going to be available, and what's the MSRP on it going to be? Can't find any information on it anywhere.

[@Keep_It_Loaded]

MSRP? $649.99 but will be found for less

[@the_spaartan5372]

Where did you find that at? Just checked Google again, and still can't find it

[@Keep_It_Loaded]

@@the_spaartan5372 I'm a dealer, just recieved pre-order request today. Have my rep coming in tomorrow, hopefully he'll have one on hand to check out.

[@the_spaartan5372]

Oh okay, cool

[@grif5447]

@@the_spaartan5372 SWFA has a placeholder listing at $500, and don't forget that comes with a 34mm mount which aren't exactly cheap

[@chansen9478]

Where is this scope manufactured?

[@joshuaadams9631]

CHINA

[@Edge51]

What about a FFP 1-10x? Any plans to make one?

[@markruby7143]

I picked up a Sig AR 10 and I picked ked up the 1x8 perfect match.

[@ronburton7611]

Looking at this as an option for my new ruger sfar in 308. How is it holding up on your ar10? still recommend it? looking at engaging targets at no more than 500yards so think this should fit the bil. thanks

[@maviskilpatrick7592]

How many hours does the battery last?

[@josephvaldes1077]

What's the eye relief looking like?

[@kingofshrimp]

does the tango msr have motac?

[@ACOGguy]

Why did you guys decide on the hold over points you used? They don’t line up with literally any caliber.

[@kevenrand7124]

when is the 1x10 coming out?

[@JPPVESA]

Man said 5.56 to 7.62 ...I'm fixing to get one for moose hunting in shittygritty packed with shrubs and branches type of forests for a 30-06....does it hold on that as well when shooting across an open field...?

[@edgualdino628]

Where is it made thank you

[@keyboardcommando5146]

China

[@ryanrichardson9915]

Anyone have a Zero recommendation for the 1-10? 50 yards, 100 yards, etc…? Thanks in advance!

[@CPurdiePlays]

What did you end up going with?

[@randyestremera2418]

I believe they recommend 100yrdd

[@AldapesExpress]

What do I level the line to?? I did between the screws and my reticle looks sideways

[@althor9997]

You level the line to the gap between the clamps. Keep in mind thatbits just leveled to the rifle, not level to how you're holding the rifle. No one is ever going to shoulder and cheek the rifle completely level

[@aaronutt1489]

Is it first or second focal plane?

[@narb3h]

Second

[@alphamale4497]

Is it ffp or sfp?

[@kevenrand7124]

Is the 1x10 ffp?

[@johndenham9999]

Everyone watching this video, will wish you would have told us the price.

[@talkingrock7011]

Absolutely

[@MrSalty-pg9ty]

I paid $249 for the 1-6x24mm at Sportsman’s Warehouse on Black Friday

[@amistosophoto]

Looks promising

[@dimsum1033]

Where are they made?

[@nushinebob]

Chinesium

[@dimsum1033]

@@nushinebob thanks I found out elsewhere. In that case, no thanks then. I will pay more for one made anywhere else.

[@jinglelingle26]

I did my research and decided to go with this one...ordered it and it arrived right on time but the reticle was upside down and a little crooked too..sure hate that but Im gonna have to go a different route..assembled in china

[@rollinthesweets6147]

You were looking through it backwards 🤣

[@machine1758]

Daytime bright?

[@stevenkennedy4130]

What barrel length is your BDC set for? Thanks for the share!!

[@ACOGLMT556]

When I was younger, I asked trijicon a similar question. They basically told me that once you are sighted in the difference in drop for the barrels was minimal and that the BDC would work fine for whichever barrel length you are using. IF you need to be exactly precise while using the BDC then I recommend spending more then $500 on the optic lol and maybe something with more magnification.

[@ACOGLMT556]

I like the torque specs but wish they would maybe hide it inside the "rings" or engrave it either in the same spot or maybe the bottom of the "Ring", just not a fan of the big white letters.

[@nasirmahmood6452]

Nice

[@robertspuller6121]

I’m pretty sure I talked to you on the phone the other day jake

[@-RONNIE]

👍🏻

[@realisrealite5554]

Just bought a Sig 1x6 tango msr today.

[@mrshort2379]

I wish I had one of those Tango MSR 1-6 or 1-8 to test out on my AR-15. I have heard good things, but I would have to test one out before I could agree. hook me up

[@MF-Rell]

Get one they aren't bad by no means. They're a Lil bigger than a Strike eagle and for the price I'd rather have one of these.

[@josephvaldes1077]

Hows the eye relief?

[@MF-Rell]

@@josephvaldes1077 Not bad almost 4 inches.

[@josephvaldes1077]

No shit? This is definitely going on my next build. I'm running Romeo 5 a Juliet 3x on my current set up.

[@Alop777]

Mr. Short, if only things worked like that. You're getting an A for effort. 😂

[@MrJbrew69]

I’m sticking with PA but the tango 6 definitely a worthy set up

[@higgenbotham]

Why push the BDC reticle on the civilian market. That's fine when your scope is match to a rifle in an issued loadout, but that optic calibrated for M855 out of a 16'' barrel with no suppressor at sea level won't do me much good with a 18'' barrel pushing 75gr's at 700ft. Or what about swapping over to 6mm Arc, 6.5 Grendel, .458 socom, 300 blk ect. Just give us the same reticle design in mil or moa, and leave the dope to us.

[@jamesgarrison5546]

You can figure out what the holds on your subtens are for your caliber/barrel length. Does it really matter if your 2nd subten is perfect at 200yards or 200 meters or 213 meters? They’re for guidance, not Biblical cannon.

[@higgenbotham]

@@jamesgarrison5546 Not concerned with round measures of distance. Marks at 1, 2, 3, 4 moa are quicker and easier to use than 2.4, 5.6, 9.5, 14.5. To each their own.

[@jamesgarrison5546]

@@higgenbotham even MOA/mrad don’t have any intrinsic value unless you know what they mean to your specific barrel/ammunition combination. Neither is “faster” especially when discussing a 1-6 which aren’t for PRS type shooting. They’re ideal for combat range engagements. Get a milling reticle high magnification for your PRS gun. A 1-6 with BDC is for rough range estimations at close distances. You’re asking for a $5 adjustable wrench to also work as a torque wrench.

[@MF-Rell]

@@jamesgarrison5546 I got the BDC6 and it's not marked so you can figure out your own holds.

[@axe609]

Probably because only 1 in 10 shooters know or care, they want an affordable optic they can use and understand and has reference points to help keep it simple. The other 1 is likely going to be buying a higher end optic anyways.

[@HellsHitman]

5 year warranty so it sucks Vortex primary arms Steiner Schmidt bender and others life time warranty no questions asked

[@SnipeU696]

Now......