Tank Clutch Assembly (Tank Project)

[@ГеннадийЕльников]

Посмотрел несколько ваших роликов , вы настоящие молодцы , все сделали своими руками !!!

[@eklein3904]

Greetings from Australia......great job guys.

[@nachocheezed]

Reading the comments, it's like the whole world is watching!

[@raceace]

I love it when the condensed english version episodes comes out as the auto translated versions do your head in trying to understand. Love your work lads Trust the Dutch to tackle a Russian Tank rebuild, next raising the Titanic for a little restoration and then a Refurb on a Space Shuttle.

[@deborahchesser7375]

Rhys Hughes so that’s what they are speaking Hollish

[@TheAir2142]

Rhys Hughes Well there are a few Russian space shuttles left behind in a hangar in Kazakstan after the fall of the Soviet Union soooooooooo.

[@angelamcmahon]

Love this series, can't wait for WW3. Feels safer now.

[@Jaszczur-sp2tx]

one rpg and that thing is done :D

[@dougohboy5190]

they have not put any oil or axle grease in that planetary gear steering hub....

[@Taceau]

@@dougohboy5190 Copper grease, look at the collor of it.

[@dougohboy5190]

@@Taceau '''' yeh thats on the spline and pre-load nut, there are internal planetary reduction gears you see dirk cleaning the sealing rings on the centre sprocket,, that the outer sprocket gears mesh with.

[@DrRence]

@Hooha888 i do

[@jamescharron8550]

Sending some love from the United States!!!!! Keep up the great work and I'll keep reading the subtitles!! x.x

[@jasondoerksen5158]

I love watching you guys work! It's like watching the show Tank Restoration but with a lot more in depth detail! Keep up the good work and I'll come back every week to watch. Sending love from Canada

[@arjanvanraaij8440]

Every workday a update on the other channel werkplaatsvlog. English subtitles is about 3 to 4 day behind.

[@jasondoerksen5158]

@@arjanvanraaij8440 I'll check it out for sure

[@kaapeliman6716]

Hello from Finland

[@nullwii]

I want you guys to get safety wire pliers lol, it would make wiring the bolts easier and cleaner.

[@AMCguy]

There called aircraft pliers or mousing pliers

[@nullwii]

@@AMCguy the ones i have are called "safety wire pliers"

[@RandomShit169]

@@AMCguy The official name is safety wire pliers, we just use them alot in aviation.

[@mindaugasr]

I love this series, as well as vlogs. Greetings from Lithuania!

[@DrRence]

Lithuania is russia right?

[@mindaugasr]

@@DrRence I hope you are saying this with irony :) . It has been almost 30 years since Lithuania is an independent country.

[@mravecsk1]

@@DrRence Yee, it was under russian occupation and many countries/nations still are.

[@BerryBlueEyes]

Kudo's voor de cameraman jongens, het gaat met sprongen vooruit, leuk en goed beeldverslag van wat jullie allemaal doen! top! En natuurlijk ook jullie zelf, een dikke duim, want wat zijn jullie een stel doorzetters zeg! met zoveel geduld en ontzag voor het materiaal waarmee jullie werken! Het blijft genieten!

[@thespectator2976]

Greatest project on the KZbin right now, I just CANT wait untill its done.

[@ronernst3991]

Stacked multi plate clutch with inner and outer baskets just like a motorcycle clutch, pretty cool.

[@malithwijesekara2054]

Hello from Sri Lanka! Amazing restoration project. Love to watch both channels.

[@СергейМогилёвцев-с8у]

Парни, молодцы просто. Трудно представить, как можно что-то отремонтировать в танке при ремонте в поле, когда все это стоит в собранном виде на машине. Спасибо ребята за труд.

[@павелкулешов-ъ8ж]

Смотрю и себя вспоминаю, службу в ремроте начинал, учили гайки крутить, только танки Т80 были.

[@RichardFrost]

I have been watching their "Workshop VLOG channel" for months - even though I dont understand a word of dutch its well worth watching! Both of them work so well together as a team each have extensive backgrounds working on engines. I know its incredibly hard to do the english translations so I am fine with their being no English translation on the workshop vlogs.

[@teamidris]

Tip of he week; bend the end of the lock tabs up slightly before you fit them. Then you don’t have to fight a chisel under them to lock the nut.

[@daveswarbrick5576]

The clutch looks very much like a motorbike one in the way it works, great works guys. Thanks to the people who are doing the translations, really makes it more enjoyable.

[@PlanetMojo]

You guys are half mad scientist, half kid with an awesome toy! Love this channel, and can't wait until you get a war surplus submarine!

[@marksumner2292]

Love it when these come out as I can see if my assumptions about what’s going on on the Dutch daily workshop videos are correct! Still haven’t figured out why they randomly went off and took a tumble dryer to bits in the middle of one last week though :)

[@fre3bs628]

It was an experiment to tumble polish some of the rusted hardware, but instead of using actual polishing compound, they just trew a lot of bolts and screws in there and spun it, resulting in just noise.

[@kolere23]

Love watching this tank. Greetings from Norway

[@miguelvalera6810]

Hey guys, good work, greetings from Spain.

[@amozil2398]

У твоего канала день рождения сегодня! Поздравляю! Снимай больше про танк. Удачи и здоровья тебе! Лайк!

[@isabellabintjamal6596]

С уважением отношусь к людям которые делают своими руками

[@francorodriguez3894]

Hello from Argentina! Great work!

[@mostlypostie1]

G'day from Australia.

[@hanssjostrand6265]

Like it from Sweden 👍 👍 👍

[@masiaworksreaper1358]

This is great! I really like this channel. You have to do english subtitles for werksplaatsvlog to! It would get you tons of more people watching your interesting work.

[@ThomastheTank113]

viewers already add subtitles to the werkplaatsvlog. it takes a lot of time to translate those long video's so milo can't do that with his schedule. the viewers are generally about 1 or 2 days behind on translating

[@masiaworksreaper1358]

Yes. I understand. Milo has lots of work to be done. Respect for all your effort. I would ask Milo and Dirk to speak in english but it is so fun to listen this in dutch. And may be educational too.

[@oguzsafayldrm5080]

Greetings from Turkey

[@joebond5012]

Just discovered this site. Great work, love your enthusiasm and mechanical knowledge. Subtitles are great also. Thank you.

[@MrDouchoid]

The lil work arounds you guys come up with are so interesting.

[@Kron161]

Hi from Barcelona!. Great job!. i'm hooked to your daily Werkplaatsvlog but I have to say that KZbin does a horrible job of translating your automatic subtitles into english!!! this weekly updates with its proper subtitles are a blessing to catch up!

[@twocvbloke]

It's coming together so fast, you'll probably be driving it before christmas!!! :D

[@jasperooms9210]

Jongens, kij gave series! Ik volg de tank al sinds aflevering 1! Maar ik moet wel even zeggen dat die borgdraadjes echt anders kunnen. Als je een borgtang hebt kun je ze veel beter leggen. Ik heb zelf een borgtang en zou het jullie kunnen leren! Ik ben zelf namelijk een vliegtuig technicus. Voor de rest, ga zo door! Het ziet er top uit!

[@Combine1331]

Hey Mastermilo! I have an idea for your channel - I really like the useless experiments and here is my idea for an 'useless' experiment - you can get a car and measure it's stopping distance with 1. Front and rear brakes working (stock), 2. Only the front brakes working (rear disabled) and 3. Only the rear brakes working (front disabled). Btw I am really enjoying the tank project series! Thanks, Mastermilo!

[@maximilianoalvarezdive9312]

Hi Boys, the work you do is excellent and the creative way to solve the problems that arise. I follow you on both channels, Greetings from Argentina !!!

[@dtpba1]

Bom trabalho!! Grato aos legendadores!! Só na expectativa de ver o projeto concluído!!

[@richardmiller8028]

Can’t wait for the big day fellers, going to take the day off, I’ve already got the beer in!

[@jimmytvfclassic]

HEY!!!!!!!!!! CAREFUL WITH THE MATHS THERE!!!!!!!!!!! If i'm correct it isn't 18,4 n/mm!!! it is 18,4 kg to move it a cm, so 1,84 k/mm you should multiply that by 9.8!!! it's gonna be 18,03 N/MM!!! That's 10 times more!! Otherwise that clutch won't work!!! I do follow you since 2013 or so guys, and i don't miss any of this series, but I wanted to point this out as I also want that tank to run because the effort you put on!!! And if I'm wrong, don't mind me! XD

[@norifumidotcom8980]

jimmytvf said it on 1:55

[@cornevanduijvenbode557]

Wat een ontzettend leuke serie! Kijk er altijd met veel plezier naar!

[@tjeunabuurs5315]

Jullie zijn echt de beste youtubers die ik ken

[@EIM2307]

Nice to see you improving video editing. You get better and better!

[@Francois_Dupont]

thank you from Canada!

[@hydorah]

I really hope all of that works! You're so right to be ready for the possibility that something may be wrong, but it looks very promising!

[@Raulcb400f]

Hi from Argentina, keep the good work!

[@cocosloan3748]

I admire on how much hard work you put into! You are great guys!

[@Svenne1981]

ben hiermee heel laat maar die ringen om versnelling monteer je best in andere volgorde. In de drum leg je de ringen om volgorde en dan de rest erop. Gaat stuk makkelijker. Heb jarenlang versnelllingsbakken gemaakt voor de grote CAT dumptrucks

[@kraljevinabosna5599]

Hello from Bosnia! Love the series. Keep on the good work! I have twenty-five T55-s in my backyard. ...because there is a tank brigade behind my house 😁

[@keithglaysher737]

Milo, I wish you could have a set of lockwire pliers, it would make your life so much easier! Also some nice person to get the English subtitles to work! I love your channel, but I just don't speak Dutch.

[@jondavidmcnabb]

I am addicted to these crazy Dutchmen

[@erickandresgutierreztapia3215]

Best regards from Chile!!!🇨🇱🇨🇱🇨🇱

[@HeWhoDoesntKnock]

You actually can calculate the spring parameters by using number of coils, dimensions of the spring and wire diameter. But your solution works also :D

[@andries4561]

You also have to know what material it is then

[@HeWhoDoesntKnock]

@@andries4561 you can tell by the application and if its dynamic or static load

[@rctankspotter9166]

Ik hou zo veel van deze serie. Lekker bezig

[@garynew9637]

Can't wait to see this tank running!

[@MAHABO]

Great progress

[@trevorharris3917]

Great to see subtitles. Great video keep it up.

[@doubleaught7540]

Hello from Texas...Very cool and interesting vlog..cant wait for next video...

[@mikepeterson9362]

Does anyone out there have a clue how Milo could have POSSIBLY known what the correct tension was supposed to be for those springs by just testing an old one? I mean springs DO take a set with age, right? And he definitely knows that. Was that all for the camera? Did he just order actual T-55 springs from Eastern Europe and the rest was just for show?

[@rubenjimenez4589]

Here from Chile nice work

[@Andrew_Zvicevich]

Very good! Russian respect✌️🔥

[@peterderiga8090]

Misschien is het een leuk idee eens een TOEN vs NU te maken? Ik kijk zelf regelmatig naar de eerste afleveringen om het vergelijk te maken!! En ik ben benieuwd naar de koepel (vergunning, planning?!)

[@reiket6734]

Lekker Milo. Altijd leuk om zo te kijken

[@alankor_official]

Quadratisch. Praktisch. Gut

[@GarnettM]

Thanks Milo for making your vids CC - English ,Those hubs look very heavy The Tank should be a Giant event after it`s finished ,Do you have a finish date ?

[@nachocheezed]

He doesn't have a deadline cuz their still hobbyists but depends on when ww3 start i quess:)

[@GarnettM]

@@nachocheezed Should be a howl when it's done that's for sure.

[@Combine1331]

I watched a video about the latest model Toyota Tacoma and in the video they asked why this model is still with rear drum brakes. In the video the answer was not clear - 'the engineers decided that way'. But here is another useless experiment idea - Get a car with rear drum brakes - measure it's stopping distance power, convert this car to rear disk brakes and see if this makes any difference at all. Cheers Mastermilo!

[@antbran1916]

Great series enjoy watching your video's at the end of a hard week.See you next friday!!

[@christianalegre9809]

Ya falta menos para terminar . Obviamente hay muchos trabajos que hacer . Pero del 💯 ya están en el 70 por ciento buen trabajo a sus colaboradores del Equipo Máster Milo . 😊😉👍

[@cg9542]

Keep up the good work. Best wishes from scotland 🤘

[@ФёдорЕрогодский]

Розовый погрузчик это просто класс 👍

[@emre2na]

Love from Turk Republic!

[@divljacina1]

its cuz of you guys and guys like you this world is worth something :D god bless!!!

[@Boemel]

Plantrekkerij is weer geweldig :D

[@hubertgunpowder]

Het gaat fantastisch, jongens !!

[@MrJvdlugt]

epic hoor dat jullie dit doen. Keep up going!

[@davidlawrencebanks4610]

Great, brilliant, top work!!!

[@GregSilverado]

Tanks a lot mate.......

[@jamesthornton9399]

You still need to make some sort of Jig to help you use your Bathroom Scale to give accurate pressure numbers???

[@POVLA]

I’ll be watching this next time i think something is too hard to do.

[@TheAir2142]

Once the tank is finished will you drive it through the local town? Would be really funny to go through a McDonalds drive through with it.

[@vliegtuigje16]

Hey, is het misschien een idee dat de vrijdag video op dit kanaal naar de Zondag 12:00 gaat, op vrijdag afmonteren, uploaden en inplannen. Zo heb je elke dag van de week een video, en is de zondag een soort van overzicht wat er die week is gebeurd in vogelvlucht, met standaard ondertiteling vanuit jullie. Groetjes, prettig weekend!

[@ikke382]

Wanneer verwachten jullie de 1e testrit met de tank te kunnen gaan maken?

[@fvw5708]

Weer genoten mannen, praaaachtig! #gazodoor.

[@ninja2kernow]

Thanks for subtitles

[@giwrgosmpakogiannhs859]

A lot of job guys this awesome project!!!

[@sumanmondalsuman7635]

Thanks

[@helmisahaja2028]

mastermilo make restoring a tank gearbox looks like assembling a car wheel 👍

[@loloaqici82qb4ipp]

It seems you're not getting much grease into those bearings, by that I mean not packing them, just brushing grease onto them. Is there something I'm missing?

[@arjanvanraaij8440]

some bearing are just pre lubed ther is a presure lube system.

[@Reactordrone]

They were completely filled in the workplacevlog video, they just didn't show it in the round up.

[@gerarddoller8883]

Wat gaan jullie doen met die golf

[@fandiirawan1044]

Is the clutch filled with oil or just grease? btw great work Milo

[@MP-qu4mk]

The clutch plates aren't filled with anything, they stay dray. Only the gears are lubricated.

[@webmozaic]

How did you know how much to tighten down the nuts on the plate that sits on the springs?....and get them even.

[@timmayer8723]

webmozaic this tank will never be driven as hard as when it was a true battle tank in war. No doubt each and every nut and bolt had a torque value when the tank was being assembled. This would still be the case for engine and transmission assembly but for the non stressed assemblies the factory torque value is less of a concern. Depending on the diameter of the bolt there is an assumed torque rating. 12 MM bolts could easily be tightened (torqued) to 180 Nm. Smaller diameter bolts could be tightened to a lesser torque value and so on.

[@webmozaic]

@@timmayer8723 ah ok. Thank you for taking the time to explain. Appreciate that. :-)

[@guaracyribas6112]

BRAZIL SEGUIDOR 🇧🇷💙

[@harmeiting8182]

Waarom niet op zondag? Hebben we elke dag wat te kijken! 😜

[@MP6148]

Like from Portugal

[@deborahchesser7375]

You guys need some torque wrenches and batt powered impact guns

[@robhartman01]

Hey master milo heb je verstand van diesel motoren?

[@simon515]

Great videos! Too bad Werkplaatsvlog doesn't have english subtitles, but I get that it would be too much work. Love 'em anyways!

[@juliusfucik4011]

The vlogs have subtitles but there is a delay of a few days. A lot of volunteers are working on them. So just watch with a week or so of delay and you will get all the details.

[@simon515]

@@juliusfucik4011 Oh really!? Didn't know that, gonna check it out. Thanks!

[@thewildrunners9051]

heee mense top da jullie weer kijke

[@АлександрСегеевич-х8ю]

Красава очень клёвые видосы

[@TheLantami]

guys, locking wire instelled not correctly, check how locking wire are installed on airbus, boeing and etc. Like from Lithuania