Crawl Space Encapsulation! Make Sure Your Project Is Done Right!

[@FieroGTXX]

I would work for your anyday. Pride and Perfection. Havent seen ANYBODY do any better. WOW!

[@TannerFlowers]

Thank you for noticing too! It don't happen by chance! There's a lot of effort that goes into creating these results.

[@majestikunikorn2183]

I know nothing about crawl spaces and I just watched an hour of this, because I could see the quality of work you did!!

[@TannerFlowers]

Thank you for saying that! I appreciate it! -Tanner Flowers

[@majestikunikorn2183]

No problem you worked hard, so you deserve these comments! 👍

[@TannerFlowers]

We certainly did! Wait until you see the upcoming new project video. We had to rip an existing encapsulation out, and then install our's. Should finish it up tomorrow I hope.

[@hungvu8480]

I have not seen this kind of workmanship for a good long time!

[@TannerFlowers]

Thank you very much! 👍👍

[@cglarsen26]

The taping is so clean - especially on the piers. Unless you've done this work it's difficult to comprehend the level of effort required for a end product this nice.

[@TannerFlowers]

Thank you very much for noticing.

[@latoniaeilum1982]

Mr. Al Sharpton! Is Doing Well, In "Motorhome" - High Profile!!! Governor: Tanner Flowers!!

[@TannerFlowers]

Blessings be upon my people.

[@steveobutler1384]

I’m in the field!!! That end cap is fire!!!

[@TannerFlowers]

Woooooooooo! Thank you!

[@PTucker0864]

Back breaking work for sure. I needed to sell my house back in 2019....it was a nightmare....me, alone, digging a perimeter drain in mud under the house....I couldn't afford to go all out like this, but it solved the problem. I used a little bit of info from different channels to git-r-dun.....took me 8 months to get that house sold after I already bought another one! Doing all of this while working a 70 hour week trucking job.....felt like I was living in a grave....you guys make it look easy....lol.

[@TannerFlowers]

Unfortunately, I have done wayyyyyyy more of them than I even care to know the number to. I reckon it's just like anything else. You just get more and more adapted to the situations, the more you voluntarily subject yourself to said situations. I bet you was wore out!!

[@Amer1ca56]

Been fighting this battle for weeks now. At 68, I’m good for about 3 hours per day under the house then have to let my knees heal for one or two days before I can get back at it. 😮 I just sent a text message about a quote for my crawl space.

[@TannerFlowers]

@Amer1ca56 I believe you.

[@blainewilliams4627]

Man I’m trying to venture out and get into the trade on my own. How does it look so tight and seamless

[@TannerFlowers]

@@blainewilliams4627 trainings can be booked at CRAWLSPACEARTISTS.COM

[@JoeyGaglioti]

That’s how you do work boii!!!! I can’t find ANYONE around here that works like fhis

[@TannerFlowers]

Hard to find. Thank you too.

[@tracker335]

Awesome,awesome, awesome job !!!

[@TannerFlowers]

Thank you very much! 👍

[@chief5981]

Unbelievable man. Best encapsulations by far. But.. but.. but.. the termite gap 😆

[@TannerFlowers]

I love making the uneducated babies cry. Appreciate the kind words amigo! 👍👍

[@zachBking]

why is he YELLING? haha. looks great, good work

[@TannerFlowers]

Holy Spirit grabs a hold of him occasionally. #Blessings

[@JoeyGaglioti]

Will this floor have insulation?

[@TannerFlowers]

I cannot recall why he held off on it? He was having this place remodeled. That's what all the beating and banging you hear going on was. Not sure if he's ever gotten any installed, or not. We did at his last house. He had 3 crawl spaces at his last house. He's a great guy. I have always liked this customer.

[@latoniaeilum1982]

Governor Tanner: Will be great in the "Level 3 - Cherry Grove, South Carolina

[@TannerFlowers]

I took this trip to Garden Grove. Smelt like Lou Dog inside the van.

[@JoeyGaglioti]

Where do you buy that 20 mil poly?

[@TannerFlowers]

Any of that info is covered during the consultation. I am free info'd out.

[@streetsweepsonic1360]

Start to finish what would something like this cost?

[@TannerFlowers]

Depending on measurements, around 30k.

[@danlinky4959]

Man super nice job. I wish you were close to Rocky Mount NC.

[@TannerFlowers]

I have a NC crew. Thank you too.

[@SeanBaker]

Damn, this is some clean work!!

[@TannerFlowers]

Thank you Sean. 👍

[@SIR_TOOLS]

Perfection!

[@TannerFlowers]

Appreciate you!

[@ianrobinson476]

11:29 check out the cracking that is starting from where the builder notched out the girder instead of shimming. I dont know if you do jack supports too but Tanner that's definitely something you should point out to the home owner for the longevity of his home. And at 12:09 too.

[@TannerFlowers]

That's what his builder's for. That's the last stuff I want to learn. Wish I didn't know what I do.

[@ianrobinson476]

Hahaha, just trying to protect your beautiful work.

[@TannerFlowers]

I know. I appreciate it too. But if people only knew how much I didn't care if I ever did another one of these in my life, they'd likely appreciate the effort I put into them even more. I am already hard to access. But I am about to take my picking and choosing to a whole new level.

[@darrelc5411]

This is nice, how much to get something like that done?

[@TannerFlowers]

20k - 30k+ depending on the size of the project.

[@mteske1]

Do you seal all the vents except one, and put the fan in the one left open?

[@TannerFlowers]

All but the exhaust fan placements. Typically 2-4

[@tinaelizabethmcdonou]

Have you ever repurposed or collected water from the sub pump or a dehumidifier? Say for use in a garden?

[@TannerFlowers]

Would be a great idea. 👍👍

[@rampg1008]

Thumbnail is lit 🔥😂😂

[@TannerFlowers]

Haha! That one was my wife's idea. I don't follow that stuff. Crawl space is a jewel though! 👍👍

[@nate456]

is the vapor barrier too high? I can't imagine the homeowner selling the house but if he does, will the termite inspector rip all that down to look at the sill plate? also looks like the vapor barrier touches wood on the pillars. does the homeowner complain about the dehu noise? I noticed you didn't put the dehu on foam to stop vibration or does the rope absorb it? did you double up on vapor barrier? otherwise looks great, super nice to have the external pump on the dehu, thanks

[@TannerFlowers]

We have never had any complaints about anything. And everything is visible. Poly can be pulled back anywhere along the tops for inspecting. Don't ever be fooled by the ignorant bug people's claims. They are just repeating what they have learned from their local branch manager. Research CRAWLSPACEARTISTS.COM to learn the real facts on these procedures.

[@moavic5087]

Haha 😂 why do I see these Bernie memes everywhere. Seen him choking out an mma fighter the other day. Thanks for the video tanner!

[@TannerFlowers]

Haha! My wife told me it would be funny. So I did it. I didn't even know it was thing. I don't get into that stuff. Lol Thank you to my friend! Appreciate seeing you in the comments! 👍

[@gordonbrinker]

Amazing work. Now go get you some Champy’s fried chicken and a 40oz.

[@TannerFlowers]

Haha! I have never eaten there before.

[@paulwhite4061]

Great job Tanner, got a question regarding that exhaust fast located at one of the vents. So, all 100% encapsulated crawl spaces should have these? The reason I am asking is, my ex-wife and husband just built a really nice house and had the crawl space 100% encapsulated. There are 0 vents on the foundation so there are not any exhaust fans. Is this something that is a huge concern? They just got the keys back in March, so it is all new. Any information would be greatly appreciated, the home is in central WV where it gets very humid. Thanks, Paul White

[@TannerFlowers]

Hard to compare any other projects to our's. I have never found a like comparison. So I can only speak of what we do.

[@paulwhite4061]

So, are you saying that not all crawl spaces WILL NEED THEM? thanks, Paul@@TannerFlowers

[@TannerFlowers]

Correct.

[@JordanJimmyDavison]

Hey tanner im encapsulating my crawl space DIY after I kill mold(already solved the water problem) and finished encapsulating should I… A. Condition the space with a couple vents. Or B. Buy a fancy dehumidifier?

[@TannerFlowers]

I learned many years ago, the hard way, that if you copied me, you need both. If it is not EXACTLY like mine, and I mean EXACTLY, you could probably get by with a dehumidifier. If it's like mine, and you do not have an exhaust system, your crawl space will become stagnant, and begin stinking, as it cannot hardly breathe whatsoever. Thanks for commenting.

[@nhiakhang2622]

Sick work as usual, Tanner, but why you gotta do Bernie like that though? LOL!!

[@TannerFlowers]

Haha! My wife told me about it. I didn't even know it was a thing. I don't follow that stuff.

[@idgafboutnethang]

Correct me if I'm wrong because I'm no expert, but from what I've been finding is that fiberglass reinforced vapor barrier doesn't have as low of a permeability rating as the non-reinforced. I can't speak to the brand you're using, I just know it is that way between the Viper CS and the Viper CSX barriers

[@TannerFlowers]

@@idgafboutnethang Thanks for commenting! 👍

[@tedkoch357]

How much would something like that cost?

[@TannerFlowers]

18k-24k

[@KC-pq2dr]

I can’t really tell but looks like there is no wall insulation board. Is there a good reason for it or against it? A recent quote I got for drainage only, the foundation companywanted to put up wall board and tried to tell me it’s code. I think probably not. Why insulate the walls when not encapsulating? I can’t see anything but wasted money but I may be missing something.

[@TannerFlowers]

@@KC-pq2dr Just watch enough of my videos until you can see the truth without having anyone else try to sell you some bullshit. If it's not what you see Tanner Flowers doing, don't waste your money. Or go ahead and waste it. That's up to each individual.

[@cuzzc9617]

Tanner - Our house was encapsulated and 2 sumps installed about 6 years ago. The installer did not recommend the vent fans or insulation. That would explain why I get a smell randomly in my house…. Not consistent, just random. A couple of questions… 1. What humidity level do you like to keep the crawl at? 2. I was told the mold on the floor joist will go dormant after the humidity is under control?

[@TannerFlowers]

It should. I always want our's below 50%.

[@victorgonzo4360]

Hey tanner would you guy come down to Miami to do some work? Look for company down here but have no luck

[@TannerFlowers]

I am never too interested in travel projects, unless it is the right project. Take the recent pondless waterfalls build we did in Scottsdale, AZ. With that being said, if it happened to be something I was interested in doing, my ears are always open. Tanner likes them Benjamins.

[@JoeyGaglioti]

I contacted April air and Company that sells dehumidifiers and they are telling me that you do not put exhaust fans in encapsulated crawlspace spaces. They tried to make the analogy to me that it would be like air conditioning your house with the window open. And that the dehumidifier only runs at 50% humidity and up. So when it’s off during the winter that fan is going to let cold air into the crawlspace. I’m so confused on what to do.

[@TannerFlowers]

You won't find anyone telling you what I say. And you won't find anyone with my customers' results. You are talking to employees/salespeople, who have never done anything like this.

[@TannerFlowers]

And have you ever seen one of their products on any of my jobsites? No.

[@TannerFlowers]

Like I said yesterday, the recipe never changes. Neither do the results. Choose to do your own project however you deem fit.

[@JoeyGaglioti]

@@TannerFlowersI’m just wondering if you being in Tennessee and me in SE PA where we have harsh winters if that’s why nobody around here has the exhaust fan?

[@JoeyGaglioti]

⁠@@TannerFlowersyeah you use dehumidifiers on all your projects. I called a couple companies in this area and they all say to seal it up tight that thats the whole point. Not trying to argue with you at all I’m just trying to understand. And I can’t find a vent that closes when the fans off

[@adamstacey4817]

For your 20 mil vapor barrier. Is that (2) 10 mil layers glued together? I only ask because I am starting a job on my own house and have been watching a lot of videos. Yours are the best by far 👍🏼. I just want to have all bases covered. Also if the 20 mil breaks down will it smell like cat urine?

[@TannerFlowers]

I am not certain how it's made to be honest. I have never seen it break down. Been using it for many years now. Thank you too.

[@splanzza]

Unless its a part of a business secret, can you reveal how many days it took you for this project A to Z with electrical and all? Don’t think you need any compliments T but just for those people who want everyday and everything for cheep they should watch this and ATEMPT to understand the level of greatness what we see here. Perhaps they should step back, reflect and meditate a bit as well. Understanding will come within. Or not. LOL I am contractor and crawl spaces are not strange subject to me. All I will say - this is mega inspiring. Thanks for sharing Tennessee Tech. 👽

[@TannerFlowers]

It was mostly just me and David. This is when I just met Hector, and he was able to help us 2 or 3 days. I would have to go back to the timesheets to be exact, but 10-12 working days. My father in law does the electrical usually in one day. Sometimes two. You can just about guarantee, one of our inside perimeter drain jobs, normal size, will take 4-5 working days. And one of our normal crawl space encapsulations, about 4-5 working days as well. This is with only 2-3 people. Could I knock them out way faster, with more people? Absolutely! But I do not approve of most people's work ethic, nor their integrity. Therefore, I don't work well with others. I never have. I am doing more trainings for other companies now than I ever have. I actually like talking to people who appreciate what they can learn from me. I tell everybody, "What you hear me saying ain't assumptions! I been out here living this stuff since 2005 whenever I started Tennessee Technicians. I know what works. And I have beared witness too many times to count, all the things that do not." I appreciate you taking the time to post your comment. That was a great one. 👍 I did my best to give you a great reply as well.

[@splanzza]

@@TannerFlowers Reply is more then plenty. Greatly appreciate it and I do mean it! Although not to the extent of your operation I do have my own (contractor) and do understand what you are talking about completely and always try to educate my customers. It is truly amazing how tight people pinch the money bag and even at such existential (structural and health) issues like ground water, humidity, mold etc. I am proud of every single screw I installed in my life and obviously you are as well at your work. We’ll keep on doing our best … loud and clear. Thanks for sharing! Thats what a true ninja does!

[@thuster123456789]

@@TannerFlowers you are a true leader in your field. I would hire you in a second!

[@TannerFlowers]

Thank you for taking the time to say that. I appreciate it.

[@understructurerepair7132]

My Brother. You might have one, might not want one, but XTreme Power makes a jackhammer shovel for $169-$189. I think the shovel part was another $20. I have a video of a solid clay mound about the size of a truck bed. Chopped it into pieces in 9 minutes and spread it out in 20.

[@TannerFlowers]

Godamighty! Send me a link. [e-mail]

[@robertleewhitt6241]

That was a real nice job but you > never told us what it cost ?/

[@TannerFlowers]

I believe this one was in low to mid 20's.

[@robertlee3805]

@@TannerFlowers nice job you did > It’s a shame that the original builder doesn’t do this right from the start !

[@TannerFlowers]

Thank you. I agree sir.

[@latoniaeilum1982]

Mr. Tanner, Promoted To "Governor" Motorhomes On Wheels!!! 2025

[@TannerFlowers]

Won the election by a landslide.

[@gallardo360]

that bait click is the best ever ,

[@TannerFlowers]

He wasn't worth a shit under there with us.

[@latoniaeilum1982]

Tanners Train Stations 2025

[@TannerFlowers]

Choo Choo

[@loganwebb1633]

why are you screaming

[@TannerFlowers]

I do whatever I want.

[@gallardo360]

that liberal democrat in the shot . lmfao

[@TannerFlowers]

Lol! It was a funny meme at the time.

[@afk9handler]

Why you yelling tho? Jesus...

[@TannerFlowers]

No. It's just me. No Jesus here. You if the shoe fits.