Refret to stainless steel and restoration of a Gibson Flying V

[@buzzedcoffee]

These are my favorite guitar restoration and repair videos because there's no music or voice over - just the sounds of the instruments being repaired!

[@TanyaShpachuk]

Thank you!🫶

[@tetedur377]

I like watching twodfrd as well. He's a little more talkative, but he also plays a rif or two at the end of most videos.

[@Peck_Bull]

Agreed!!

[@Mormotic]

yeah dude :D I agree!

[@fabriziot1467]

indeed

[@TanyaShpachuk]

!!!! ATTENTION !!!! We have a huge YT scam activity, so I remind you again - I do not hold any giveaways or contests, moreover, I do not have a public telegram channel, if someone try to contact with you like this - block them! Be careful and don't fall for such scams.

[@markdalton6662]

You do great work but your videos are all the same , if you want to grow start talking and work on something different from refrets .

[@RicardoGordo]

This is pure asmr for guitar players!

[@sebastianpizano6610]

Absolutely yes

[@em-dashman4404]

Yup. Sleepy now 😂

[@burtosu86guitar]

Yes it is

[@nathaninostroza7655]

Not gonna bullshit u. This is straight up pornography for me.

[@joshbabbitt9243]

Would be absolutely DELIGHTED to have someone with such impeccable work, working on guitars near me!

[@tetedur377]

I love watching you work. The videos are calming and relaxing, especially the ones that are a little longer, like this one. I know it's extra work for you, and I appreciate that. In the long run, it can only benefit you.

[@kennylongnose4001]

Me too...you really seem like a person who knows at every moment what the problem is and how you will solve it. If you weren't this, maybe you should have been a doctor? But, does it seem to me or is it just me: with every new video and new details in nail polish?

[@KennethRrvik]

Watching a beautiful instrument of this kind get cleaned up and set up is soothing. Thanks!

[@stevemondragon5499]

The only request I’d make is for more subtitles on what and why you’re doing for us that aren’t in the know so we could be in the know 😆

[@MrRoderickkohn]

As always, very nice work young lady. I do appreciate you are being a little more in depth showing the rounding off of the fret ends and showing how it takes a little more than a few taps to seat the new fret in the slot. Also the close ups of removing excess super glue with the chisel. And nice nails too!!!! Always a different nail polish job for every video, nice touch and it gets our attention.

[@ShadowSloth3]

This is like the best mashup of ASMR and satisfying videos. It really feels so good to see that gentle process and the spectacular payoff. Like all is right in the world for this moment.

[@francescroig2446]

My admiration for Tanya's talent. It relaxes me to see her work.👌👍

[@Clabian96]

Could you put a list up somewhere on your videos or your KZbin page where you list and link the tools you use? I'm curious what some of them are, and I do not wish to waste your time by asking constantly... You do beautiful and inspiring work! If I'm ever procrastinating a project, I can put one of your videos on and get the inspiration to get to work! Thanks for sharing your videos 👍

[@craigbransfield9078]

Very thoughtful and careful work. Best regards, safety, and happiness to you, your family, and your countrymen 👍👍

[@dimitriskalaskanis2343]

Your videos are very calming. You are the Bob Ross of guitar repairing.

[@KerteszHuba]

Just starting to repair guitars and learn things to do the " proper" way, your channel is actually more helpful than a lot of books or pdf's that I found in the webs.. Thank you Tanya ! 🙏

[@deanbartone8187]

I have to say I recently discovered your channel and I am quite impressed with the work that you do I myself do my own guitar work, and recently started doing fret work. Of course, starting with cheap guitars and I must say you are very inspiring. I have learned a few tricks from you. Also thank you for sharing your craft. I will keep watching your videos. You have excellent craftsmanship.

[@tottipertutti]

Vederti lavorare è meraviglioso. Hai una cura incredibile nel fare le cose. Sei bravissima!

[@DoktorDamage]

Just found your page today. Your attention to fine detail is immaculate. Nice work Tanya!!!

[@czechmate9497]

I'm hooked! I woke up this morning to get ready for work when I stumbled onto a short of hers! I got back into bed and said NOPE to work today!

[@dangerousXS]

Thank for your hard work ! I've learned alot & enjoyed it, too. I just tinker and assemble "bitzas" - bits a this, bits a that. Your videos have demystified what goes into things like a refret. Now if only I had your patience, talent and skills !

[@AndrewChilcott100]

Very nice work ! I like the addition of the subtitles 😊

[@TanyaShpachuk]

Thank you!

[@pdstokes8]

Beautiful job. I love the Flying V, one of my all time favourite guitarist Andy Powell plays one.

[@My_Life_ua]

Просто дивовижний процес реставрації! Вже скільки переглядаю Ваші відео, постійно бачу якісь нові інструменти! Це ж яка потрібна відкалібрована точність усіх приладів, щоб кожна деталька відмінно стала на своє місце! І ще прикольно іноді виглядає манікюр, як маркери на грифі, доволі символічно! 😊 Гарна робота, 👍🏻 як і власне сама гітара! 🎸

[@TanyaShpachuk]

Дякую)

[@janjosephmelenhorst1166]

Great video again and also thanks for explaining what you re doing. Helps me understand the process, reagents you’re using

[@bluephoenix3865]

I remember back in the day when I was not a guitar player I never liked that shape but now I’m in love with that shape, beautiful😎❤️

[@zepp3lin]

I own 7 electric guitars, so I did all six with stainless steel frets, I have not refret my 7th guitar because my tools are all blunt except for the files. I need a new fret cutter and my tang cutter tool broke on the 6th guitar...have not ordered it yet and it's been 2 years since I DIY my own stainless steel fret job. After watching your video, it kind of inspired me to finish up my last 7th guitar. Right now that 7th guitar is sitting inside the case without any frets on...🤣

[@marshallohio5512]

This lady is definitely a smooth talented individual 😊

[@PhpGtr]

This is the best thing I have watched all week, and I have been goofing off the entire week on YT. Well-done.

[@jeanlawson9133]

I have owned several V's and Explorer's and they all have their own voice, moreso than any other.... Your videos are awesome 👍 Thanks so much.

[@ClintHennis-zy9ck]

You do great job. And you have beautiful hands. And I heard you sneeze on another video and you have the sweetest little sneeze I've ever ♥

[@hellomynameisbenjaminupton]

I love watching you refret guitars. You make it looks so easy.. I love working on my guitars, but have never had the confidence to do a refret.. Maybe one day I will. Thank you.

[@EiziKreizi]

Just discovered this channel yesterday and now I’m binge watching, great video’s🤘😉

[@douglasholdenjr.45]

You're a true craftswoman!!!! Impeccable work!!!! Cheers from Florida. 🎉🎉🎉

[@TanyaShpachuk]

Thank you!

[@douglasholdenjr.45]

@@TanyaShpachuk You're very welcome

[@StephenLight-oc3tl]

I only discovered your channel a short time ago, but I really enjoy it. Keep up the great restorations. Love them. Take care.

[@kaka_papi]

Beautiful work!! Listened and watched before falling asleep. Quite satisfying. Planning to have a shop of my own soon. Inspiring to watch you work!

[@M4DR1U5]

Wonderful job! Wishing you the best in these troubling times!

[@TanyaShpachuk]

Thank you so much 🫶

[@FastRedPonyCar]

I've watched several of your vids now and they're all great. You and TWoodfrd are wizards with some of these repairs. A lot of work (like refret) that I don't want to attempt on my own guitars. I've got an old Tokai les paul badly needing a refret job so it was neat to see the process. I'm surprised the owner of this V didn't want you to install the Kluson locking tuners and throw those Magnums in the trash. I had the magnums on my Tokai for about a year and they were really a pain in the ass.

[@Plowguitarist]

Beautiful job young lady. How convenient it would be to have my lady as my guitar tech also. 🥰🥰

[@thomasbarker642]

I’ve watch loads of luthiers do this job and yours is top notch

[@robertjones2787]

I love your restorations. Just wish that you would talk us through what you are doing and why. Maybe we all could benefit from your knowledge. I sure would!

[@robertjones2787]

And also give us demonstration of the final project.

[@Strumbum01]

I could watch these all day long. Great work!

[@JM_Smith1]

Hii ..just found your Kool channel..I absolutely love listening and watching you ..I'm The Rythmn Guitar player for DOWN2KILL..you are a true artist..well just wanted to say hii..and I love your work

[@rajarahman9823]

Nice work. Never give up on a job. You want clients to say, “Tanya’s does an excellent job and she takes great pride in her work”. If in doubt, never be afraid to to ask for advice or assistance. Keep up the good work but also, know when to go on holiday.

[@lenniejosephful]

I love your work and watching you do this. I have a Flying V just like this.

[@zachbot]

I enjoy watching for the craftsmanship/talent and cool guitar luthier work - but really I want to see what your nails look like and how many times they change in 1 video. Stay weird!

[@zachbot]

wait...is this a new string wind tech I am unaware of?

[@TNTales]

That is a gorgeous piece of ebony. Beautiful work as always.

[@fordsrestorations970]

I have been doing Museum Quality Antique Restoration starting at the age of 5 over the years I learned a couple things , watching this video reminds me of my own hands. -->Tanya you know what that means.. excellent work !

[@gdnrecords]

Beautiful very relaxing to see how you make this precious craft, also wondering in which part of the world you are located at, just wondering if You could receive my beautiful and beloved Epiphone black beauty for grneral maintenance and refret service and also if possible refinish of the opaque paint.

[@JazzStrat781]

Great job and attention to detail 🎸👍 those polished frets look so awesome!

[@krommetal]

Wow 🤩 you did a fantastic job on this! You have a new fan here.

[@mikedinjoliet]

You do excellent work. Thank you for sharing your craft with us

[@sergejk]

Hi Tanya! Great work! Love to watch! If you could present us action at the nut in numbers for each string? That would be great! Thanks!!!

[@ThatOtherRaccoon]

Wow. This is one of the most enjoyable and educational videos I’ve ever seen.

[@TanyaShpachuk]

Thank you 🙏🏻

[@debhart4302]

So enjoyable watching you do your awesome work!

[@vroge3275]

Very relaxing to watch, but I'd be a bundle of nerves looking after such lovely guitars. Looking forward to the next one.

[@TanyaShpachuk]

Thank you!

[@narcissustorres5102]

You do amazing work, and YOU ARE AMAZING YOURSELF!!!

[@BadSector]

awesome job, I am thinking of doing stainless steel frets on my main strat, they are close to worn out and I need to do a refret soon

[@retrojoeman]

Nice clean work . Welcome to KZbin ... I've never seen the solder on fret removal before , looks like good heat transfer ...

[@pk952]

I love how you don’t put too much bevel on the fret ends.

[@daveshepherd7582]

Beautiful fret work on this stunning V!!

[@alessandroferraro5743]

Tu trasmetti un amore per il tuo lavoro in maniera fantastica grazie Alessandro dell'Italia

[@elvisgeorge6307]

that’s so awsome , I love your video’s , especially when your on them , oh yeah I’m in Canada

[@downtown4028]

My 1990 Greco Mint recently had jumbo stainless installed, great option. All my primary instruments have stainless steel.

[@jeffchase2491]

Watching your videos makes me want to work on my basses. Maybe some day.

[@Captain_Yata]

Normally I'm not a huge fan of stickers on guitars (obviously people can do whatever they want though) but the black skull theme on a white V looks so cool :)

[@IL2TXGunslinger]

Beautiful jumbo stainless frets!

[@rickmasseur2008]

I love watching you work!

[@tombarone5657]

Great job. And the sub titles were a really nice touch.

[@lukecuxton1514]

I just love watching you work ❤❤❤😊😊😊

[@KFrantz]

Beautiful job Tanya !

[@diretsound5668]

Enhorabuena!!!!! Grandísimo trabajo. Felicidades Tanya!!!!❤

[@TanyaShpachuk]

Thank you so much!:)

[@brianrust6139]

I like your marking the fret board with a pencil to identify raised areas on the fret board. Good one! I've installed ss frets on my strat but after doing a fret level may have to to do it one more time. Fretboard is maple but seems to be straight though.

[@Peck_Bull]

I love your videos and I learn a lot to take care of my own guitars. Thanks!!❤❤❤

[@123henry123htc]

love to chill watching your vids, awesome work!!! keep it up

[@robarnold6998]

Again, great job! Have learned so much about the entire process for changing frets by watching a couple of your videos. Good luck and stay safe.

[@wb8802]

Masterful work; glad I found your channel

[@robertgriffin7569]

Lovely yellow flying V, looks great after refret/ clean and polish...niicely done..hey BTW, Your nails look pretty awesome too. ✌️❤️😁

[@rodrod5000]

I should review your technique for setting the slot depths for the nut. Thank you for your great videos!

[@mitchmurrell753]

Nice refresh for a worthy old soldier!

[@stephenchaulker5521]

The Guitar Doctor...Surgeons Hands...Love those Big frets LOL. Very nice guitar...V's are Wonderful 💗🇺🇦

[@Daddy53751]

I’ll say this, I just finished my first SS refret, (5 string Jazz) and WOW! What a pain. (I’m sure it’ll be worth the work though)

[@MEGAMIGA]

This was very relaxing to watch!

[@fredepstein]

Excellent fret work! Congrats!

[@BorneoHeadhuntMuslimTribe]

My favroite guitar repair..hope have more videos from you

[@scottohara2230]

Your videos are always well done. I have not seen anyone measure and adjust nut slot height like you do with the Fret Guru, can you explain your process? Thank you

[@jeremiahbeck3292]

Great job on the flying V.

[@paulwhitford7579]

Like watching a pro doing careful and quality work

[@TheIsahn]

Just the natural sound of repairing , great

[@larrynoe6162]

I am not nitpicking your work it is very good and thorough. How is the bridged ground?

[@HardwoodFloorRefinishing101]

Amazing attention to detail!!!🎸

[@treyfixes884]

Your feet press is badass!

[@michaelglodic668]

There's also use tape when you are sending

[@Sammywhat]

I truly appreciate these vids!! Great work as always!!

[@ranwaldovonslappinstein114]

Did they NEED changing? Looked good to me.

[@rallypoint1]

Awesome work!!! That bridge pick up was kinda high being worn like that.

[@martinbeaudry9475]

SO SHINY.!!! Awesome work

[@davespears2241]

Nice work lovely guitar.

[@sunnys5150]

Im hooked watching all ur vids. Amazing! 😊

[@HelterSkelter117]

Beautiful work! I recently refretted one of my guitars, first time ever, and learned that it is NOT an easy task. One question, though. Why did you not put even a single full turn on the tuning pegs? Doesn't seem like it would hold string tension very well like that.

[@maxwellbowden9961]

Hi Tanya. Is the reason for putting CA glue on the frets after they have been seated, to ensure the glue gets onto both the fret and the ebony? I have only previously seen the glue put into the slot. Thanks, I am enjoying your videos and hope you are safe and well in the Ukraine 😊

[@johnnygrind77]

OOO that guitar is pretty!! I like that it has Seymour Duncan pickups in it, too.