Taper, Drafts & Angles - Season 2 EP1

This video will give you 5 ideas to attack Taper, Drafts, and Angles in Fusion 360.....Also, need your ideas for upcoming topics :-)
Brad Tallis Channel:
/ @bradtallis8968
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/

[@markscheiner3952]

Welcome back and happy new year Lars. I cannot overstate what a help you’ve been learning fusion. Thanks

[@cadcamstuff]

Happy New Year! Thank you for taking the time to watch!!!

[@BeginnersTech314]

This is exactly what I needed I just spent like 3 hours today trying to figure out how to do these things and you explain it in a nice 12-minute video

[@cadcamstuff]

Awesome to hear. Thank you for watching 👍😊

[@deonsmit819]

I cannot thank you enough...the value you add to my learning experience cannot be measured.....God Bless!!!!

[@suzukiman650]

Thank you so much for your videos. They are a tremendous help. Learning the draft function helped me design new feet for a drum set that is getting donated to a school. Keep up the fantastic work.

[@philgeerling1844]

So glad to have you back. Please keep the videos coming.

[@cadcamstuff]

Thank you 👍😊

[@johnhildebrand8635]

Glad to see you back!!!!!! Was wondering about video on sketching on 3D surfaces using Fusion 360, I reviewed to one on exhaust manifolds and still find my ability lacking. I know it must take so much of your time to make these videos, the one on the injection molding base with all of the fast forwarding and such took better part of week to complete my model, learned so many things following that example.

[@TheChemistDIY]

Always a pleasure to watch you at work Lars, very glad your back.

[@qcnck2776]

Great to see you back and looking forward to a 2019 filled with Lars videos!

[@ristorinne5817]

BTW. Welcome back Lars Christensen

[@eduardodanielantuna5768]

Glad to see you again Lars, and Happy New Year!

[@kosinator6013]

Great to have you back!

[@cadcamstuff]

Thank you 👍😊

[@mghumphrey]

So happy to have you back!

[@DonGoddardAllAboutPaint]

So good to have you back! It's good to be learning again.

[@middleclasspoor]

So glad to have you back Lars! I hope you and yours have a great year in 2019!

[@renosgarage7451]

the last method was exactly what I needed for my application, thanks a bunch

[@user-nu6cg9cb2e]

Lars, draft is also found in sand casting , die casting, permanent mold casting as well as plastic injection molding. Also shrink allowance is req'd in all the above.

[@danielsabag5294]

as always, very clear and amazing video, I learn new things from you every video.

[@cjrobbins6511]

I'm just getting started and you helped me get unstuck while advancing my design thinking. Thank You!

[@HariWiguna]

OMG Lars! Very insightful video! Using taper and loft gives me more draft options. Thank you!

[@mindsofgreatness]

Thats Lars! This helped a lot and appreciate your content, this helped me finish up a design to train for climbing :) liked and subbed and will be watching the rest of the series now. Your content is like my TV lol

[@MatthewTinker-au-pont-blanc]

A passing thought, Draft is singular, drafts, are what you feel wheb it's windy! All the best, Matthew.

[@BrockPlaysFortnite]

Thank you! Draft was what I was looking for to add that slope

[@cadcamstuff]

Perfect. Thank you for watching

[@evanlacava9213]

Woohoo more Lars in 2019!! 💪🏻💪🏻 Happy New Year!

[@DaddyScribbles]

Excellent tutorial. Easy for a beginner to follow. Thanks!

[@johnerbert8149]

I’m extremely excited to see you back!

[@RonFloyd]

Great to see you back Lars!

[@Aherre]

Love your channel Lars!! i've learned soooo much.

[@jasonrussell8648]

I have years of ProE/Wildfire/CREO experience and started learning Fusion 360 for personal use and growth. I find it difficult navigating between the tool I work with and others such Sketchup, Fusion, AutoCad, etc. I appreciate how well you explain differences and features of Fusion 360 and you have made learning Fusion 360 easier. Thank you for your excellent tutorials.

[@cadcamstuff]

You are so very welcome 👍😊

[@Brad_A.]

Great to see you back Lars. As always, very informative...nothing but business here. Short, sweet and direct to the point. The essence of great tutorial videos!

[@cadcamstuff]

Thank you Brad

[@3dPrintCreator]

Very glad to see you back Lars, Hope to see a lot more video's from you.

[@Tools4Machines]

Thanks for the tips and showing us new and different ways, Lars. Always worth the time to watch your videos. Cheers, Gary

[@cadcamstuff]

That is awesome to hear Tools4Machines .Thank you for watching the videos

[@WA0UWH]

Lars, glad to see you back.

[@elijahcbr6009]

Yes, glad to see you back. Happy new year.

[@cadcamstuff]

Thank you elijahcbr 600 Happy New Year!

[@bjornml.08]

Great Video! So easy to find out how to use different commands watching your videos!

[@SomeGuyInSandy]

Extrude angle and Shell helped me do exactly what I needed, thanks!

[@sapvolo]

Nice to see you again Lars!!

[@cjrobbins1598]

I'm just getting started and your video helped me get unstuck while advancing my design thinking. Thank You!

[@cadcamstuff]

That is awesome to hear. Thank you for watching!

[@majikmike44]

Combine cut. This is going to help me today. You are a great teacher Lars thank you.

[@cadcamstuff]

Thank you Mike Pavano :-)

[@helicopterjohns]

Nice to have you back. Thanks for the great videos!

[@cadcamstuff]

You are so very welcome 👍😊Thank you for watching

[@3DShay]

Great as always, really learning and enjoying, and wondering how lucky we are to live at a time that such a man like you exist. :)

[@cadcamstuff]

Thank you for watching!!😊👍

[@naldrich50]

Great to have you back.. happy new year!

[@cadcamstuff]

Happy New Year to you!!

[@allengibson7346]

Thanks as always Lars, good to see you again.

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@rflournoy]

Lars, Thanks for this great tutorial. I needed this info just last night as I'm trying to learn Fusion 360. Missing your livestreams, but will give my attention to Brad. Looking forward to more from you, too.

[@cadcamstuff]

That is awesome to hear rflournoy .Thank you for watching the videos

[@Sharkaat84]

Welcome back, and thank you so much for continuing to teach us! Being a newbie with Fusion, your videos are immensely helpful!

[@cadcamstuff]

That is awesome to hear Notorious Meerkat .Thank you for watching the videos

[@CaladesiGuitars]

fantastic -- this was a life saver for me

[@sputnik4216]

Excellent. I was looking for a feature to add on a user panel. DRAFT! Nice tapered embossings add class to an otherwise boring design. Thanks!

[@little_systems]

fantastic options of draft and taper ,very clearly explained them all

[@cadcamstuff]

Thank you 👍😊

[@alonsiu]

que bueno volver a verte!!!!! feliz 2019

[@Hermy21]

Lars I'm glad you're back, it just wasn't the same without you.... 😃 And of course you've taught me several new things!

[@chigfa4529]

Welcome back ,and happy new Year 2019 :)

[@romankysely]

Lars it is nice to see you back!

[@cadcamstuff]

Good to be back 👍

[@rallyfreak12]

good to see u back Lars, happy new year

[@cadcamstuff]

Thank you Jur, Happy New Year!!

[@Benctmoi]

Ah, Welcome back and Happy New year Lars and thank you. Again, I was able to add more tools to the tool box.

[@cadcamstuff]

That is awesome to hear Eric Mathieu .Thank you for watching the videos And Happy New Year!!

[@andrew_the_machinist]

Season 2 is awesome, man!

[@cadcamstuff]

Thank you! 👍😊

[@yurekvigo]

Glad you are back!

[@cadcamstuff]

Thank you Yurek Vigo

[@vansien]

As usual, awesome Lars.

[@cadcamstuff]

Thank you vansien

[@davemarshallmusic]

Welcome back! As luck would have it, this is exactly the tutorial I needed! Thanks!

[@cadcamstuff]

Awesome 👍

[@rukey3001]

Nice to see you again..

[@hervemarie966]

Very happy to see you back :-) I will follow the season 2 with great pleasure, thanks ! Happy new year Lars :-) Regards.

[@cadcamstuff]

Happy new your to you!! Thank you for watching 👍😊

[@ricouxstephane1628]

Nice one Lars. And happy new year, all the best !

[@cadcamstuff]

Thank you. Happy new year 👍😊

[@eliegedeonbikieyoudonangou5728]

Thank you for the tutorial! Guys, how does he do to rotate the model? feels really smooth!

[@peteferguson7024]

Well I only knew of one way... the taper angle in extrude of course, so all those were new to me and would have saved me SOOOOO much time recently had I known :) Thanks as always!!! Great video / tools

[@cadcamstuff]

Awesome to hear. Thank you for watching 👍😊

[@oliver7373]

Welcome back...thanks a bunch Lars!

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@DJ9ZJ]

Hello Lars, Happy New Year to you and your family! Your videos are great and to watch the new Season is good, it refreshes what I have learned from your former videos! Thank you very much!!

[@cadcamstuff]

You are so very welcome :-) Thank you for watching! AND Happy New Year!!

[@PoulAnkerErsly]

Hi, Lars Happy New Year from Denmark. Great to see that you are back and well. Looking forward to more quality video recordings from you, and thanks for the link to Brad Tallis Channel: @ He certainly also does a great job on explaining best use of Fusion 360.

[@cadcamstuff]

Thank you Poul Anker Ersly AND Happy New Year!! Best, Lars

[@pixl3l]

Very nice, it is always good to have more ways of doing things. I love how fusion has made me rethink how I work, I use a fair amount of bodies as tools now, to remove parts. Specially on complex geometry. One example is I had a surface that was curved in all ways but not symmetrical, and I wanted a text to follow the shape of the surface, and used a whole body just to delete parts to get it right.

[@cadcamstuff]

Cool example! Thank you for watching 👍😊

[@marcotronic]

excellent tips again, thanks!

[@johnfiott]

Very interesting ! Thanks.

[@MattysWorkshop]

Gday, Thanks for the help., im new to Fusion360 and loving it, Cheers

[@jrgenneess762]

Nice to have you back

[@cadcamstuff]

Thank you!

[@dwsnyder63]

Awesome lesson Lars. thank you! .. now, can you show us how to do all that to the end of a round pole? Say you want to make a picture frame out of round wooden rods. How to put 45 degree on post end?

[@delmuch8691]

Greetings from Argentina Lars,, So clear, so perfect are your explanations, so clear you speech, that i Thanks a lot ... You ´re the reason i can use fusion 360 with almost no limits to my invention.. Thanks again..

[@cadcamstuff]

Awesome to hear. Thank you for watching 👍😊

[@stuartjones2541]

good info THANKS Lars and happy new year too !

[@cadcamstuff]

Thank you for watching 👍😊 Happy new year!!

[@belenhedderich3330]

Soooo happy that you are back! Happy New year! What I know of fusion I owe it to you! Hugs!

[@cadcamstuff]

Happy New Year!! Thank you so much for taking the time to watch!

[@chuckpickering6040]

Another great video, Lars! Thank you!

[@cadcamstuff]

You are so very welcome 👍😊Thank you for watching

[@EJTechandDIY]

Happy new year my men.

[@Jamdown888]

Very helpfull, im pretty new to Fusion 360 and enginering, but with fusion and your help its going pretty wel. Thumps UP!

[@cadcamstuff]

Thank you and thank you for watching

[@lskanon863]

Excellent. Thank you. Thank you. Thank you!

[@NWLaserImage]

Glad to see you back Lars! How about something about importing in files - specifically dxf files and how things work differently depending on how they were drawn, how they were exported, and what you need them for. I can give you a specific example of an import that drove me crazy today until I figured out what I did in the drawing/export to screw up my intended use in Fusion 360.

[@cadcamstuff]

That is a great topic! Would you mind emailing me your solution? Maybe I can work it into the [e-mail]

[@16by9_designs]

Welcome back, Lars!

[@cadcamstuff]

Thank you Mickey Downey

[@darrylportelli]

how can I add tapers to table legs ? I want to add a taper up to a specific length of a table leg and only on the 2 inside faces

[@bougagaga71]

Great video Lars, like always

[@cadcamstuff]

Thank you!!!

[@HybridiHippo]

Nice to see you back,,, good topiciin and nice content from those. Happy New Year to everybody!!

[@cadcamstuff]

Thank you. Happy new year 👍😊

[@DanGamble]

HE'S BACK!!!!!! Happy New Year Mate!!!!

[@cadcamstuff]

Thank you, Dan 😊Happy New Year!!

[@peterwakefield915]

I know you busy Las. But great to see you back, doing videos.

[@cadcamstuff]

Thank you, Peter

[@mahmudkhaliil2525]

thank you cant wait for the live streams

[@andreatabolacci2667]

Hi Lars, Happy new year! Thanks for your useful and interesting videos!!!

[@cadcamstuff]

Hi Andrea Tabolacci Thank you for watching! AND Happy New year!

[@kaellis8250]

I could use some help on a small part I need to duplicate in Fusion 360 so I can make a 3d printer version of it. Any chance that I could send an image of it for advice on the best way to create the geometry?

[@americorosales2085]

very good lars wellcome Happynewyear

[@StephenBoyd21]

Guess who's back, Lars is back. YAY!

[@cadcamstuff]

Thank you, my friend 👍😊

[@hishram]

Welcome back! :-)

[@AlfredoAntonioMartinez]

Happy new year Mr. Christensen!

[@cadcamstuff]

Thank you! And to you!!

[@DjCasonDrift]

Man I’ve been missing these sessions 🤙

[@cadcamstuff]

Awesome👍😊

[@jeffbeaudoin4544]

Thank you, Lars

[@stoikgramadanski7401]

Somebody is better than Lars in Fusion 360 🤔🤔🤔 Naah....I don't believe it 😃😃😃So good to see you back, man ! Honestly ! Happy 2019 also !

[@cadcamstuff]

Thank you 👍Happy 2019 to you!!

[@pkrause464]

Great video, Lars. Thanks.

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@lannydana1531]

Welcome Back!! I would like to know what you think of the UI Preview vs. the Default interface. Maybe you could cover that in an upcoming video and discuss the pros & cons of switching.

[@cadcamstuff]

Lanny, Watch Friday's video :-)

[@mmnyako]

Hello Lars, first of all thank you for sharing. Please is there a feature that enable one to add shrincage or maching allowance? Our goal is to cast frame housing and end bells of an induction motor. thanks

[@heinrichhelmbold419]

Thanks so much Lars! Not sure if my problem email inspired this or if it was just coincidence, but I actually solved my problem using the loft technique. This video is great because it shows that there are so many ways to achieve something.

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@heinrichhelmbold419]

@@cadcamstuff Thanks to you we have something to watch! 😉

[@MatthewsFabrication]

How do you put a draft or taper on a curved edge or curved side?