TASCAM Model 2400 and Model 12 Petition For Main Bus Compressor/Limiter

[@DonAntonioCasanova]

A big YES for a Master Bus Compressor in the Model 12. I miss this so hard for fully DAWless Music Production

[@yoco93cro]

Absolutely YES for a master comp/limiter on Tascam Model 12!

[@cassiomendes13]

Great review! And yes! Please, Tascam! My Model 12 would be more than happy with a master bus compression. Thank you!

[@chuckizzet]

Thanks for another great Tascam upload.

[@I-LOG]

I would absolutely love it if my Model 12 had a Main Bus Compressor, especially if it could be recorded onto tracks 11/12 so I could dawlessly master my tracks.

[@PatPatRoule]

Yess, please, limiter compressor for the model 12

[@purplezoid1]

Yes PLEASE Tascam!!! 🙏🏻🙏🏻🙏🏻

[@GrandCaravel]

This is why I still bounce my Model 12 recordings to a DAW for mastering. A master bus limiter is essential if you want your tracks to sound good on spotify, youtube, etc.

[@Meissnerstudio]

fully agree! Master Comp for the Model12 would a great addition!

[@Bobo]

Would love it. I haven’t bought a mixer yet but was looking for the Model 12 since it’s small and fits well into a home studio. But now when there is a newer one and looks amazing. So if the 12 can get better it’s still interesting.

[@Amighaman36]

A Master Bus Compressor would be a fantastic feature on the Model 12. This way, I wouldn’t need to transfer any files to my PC for mastering. This would the cherry on the top for DAWless Mixer/Recorder/Controller/Audio Interface. Please, TASCAM!

[@superdeluxified]

A master bus compressor would be great! Something else I'd like, although not related to this video, would be the ability to manually adjust the start/end times for vamping via the jog dial.

[@ianwinter7407]

Fab video very informative and yeah would love compressor/limiter on my model 12

[@frankborger3898]

Big yes for model 12 master bus possibility for compressor/limiter

[@royfish8522]

Yes, please TASCAM. Master bus compressor/limiter would be a great addition!

[@nickclarkemusic]

YES please! A MBC would be wonderful to master my songs to the SD card on M12. Thanks, great video.

[@andredrapeau6738]

Yes for me as well, thanks !!

[@gtmac52]

YES for a master comp/limiter on Tascam Model 12!

[@jeanlejeune2288]

I agree this would be a great addition to the M12

[@Cidr0n]

Do you got ideas for using both at once?

[@jrv8709]

It’s a no brainer to have this implemented if it’s possible Please do this for model12 tascam!!!

[@damianshepherd5627]

I'm all for a Master Bus Compressor on the Model 12!

[@getbusymakestuff]

excellent video! Yes to Model 12 MBC. Thank you!

[@roystroebel]

+1 for Main Bus Compressor/Limiter for the Tascam Model 12 ✅

[@nossborn]

It would be very nice to have a Master Bus Compressor on the Model 12.🙂

[@me_fault]

Big YES for a Master Bus Compressor in the Model 12.

[@andrewhayden8681]

YES!! Please this would be a game changer 😊 If it’s only a matter of changing some code, then why not have the option? It’s a win/win scenario!

[@StevenMichaelAnderson]

100% agree - a big YES for a Master Bus Compressor/Limiter on the Model 12 please TASCAM

[@CrossbeatsMusicProduction]

I've actually been looking at this the last couple of days.!! Great review

[@SunPointeStudio]

TASCAM, please add a Master Bus Compressor feature to the Model 12. Thank you, @RecordingStudio9, for initiating this petition.

[@SunPointeStudio]

Would the Model 2400 'Model Mixer Settings Panel App' feature work on Model 12, too?

[@mutzmusic5737]

Thanks for for the Tascam Model 2400 preview. I have my eye on it in the event I decide to upgrade from the model 12. Can't wait for the reviews to start coming out. Totally agree about the Tascam Model compressor recommendation. Also wish I had the ability to reverse the phase of a channel during MTR mixdown. Seems you can only inverse the phase during the initial tracking/recording, but not during your 2 track mixdown. A lot of times I can't determine whether the phase needs to be inverted unti I'm ready to mix down. Also, wish I had the ability to use the Inserts when going from PC to Tascam Model 12 or during the 2 track mix down. Again, the inserts seems to only be available only when tracking on the Model 12.

[@MB-kx5qs]

Yes! PLEASE Tascam! ❤ For the Model 12!

[@VincentLangevin]

1: Huge "YES" for a Master Compressor/Limiter on the Tascam model 12! / 2: For all the Tascam Model series and DP PortaStudios to be able to cable Connect & Slave to each other to work in unison!

[@kareljanda3399]

Compressor on master bus would be amazing!

[@derekmorgan3015]

Yes, please add the master bus compressor Tascam.

[@Zhahlivy]

I own Model 12 and I'd like to get a master bus compressor in my mixer.

[@MULMUS]

Hi TASCAM, Model 12 is a great unit, keep improving this wonderful hardware with SW updates like adding a Master Bus Compressor in FW

[@MrHierundjetzt]

Love to have a Main Bus Compressor on my M12

[@zuulbull1590]

big yes

[@pbmke]

Would love to have this !! As well as having the possibility to receive midi in for triggering the recording

[@GregWallis]

Am I the only one thinking this is just an incremental upgrade at twice the price? Plus, I'm convinced there'll be no more updates for the Model 12, it's just too old now, but I'm still in love with mine. Come the deals at Christmas, there just might be a few of the Model 24 available at a super attractive price. Great review of the specs, so many thanks.

[@me_fault]

last update was only 06-05-2024. continued firmware upgrades encourages brand loyalty and reduces e-waste. one reason I ditched Zoom was because of poor after sale support.

[@bruce_from_oregon]

Great analysis, another vote from me.

[@mseitz311]

YES PLEASE TASCAM

[@jayjohnson9894]

Yes, am a Model 12 and would like the Master Bus Compressors in the Model 12

[@joelpoitras6226]

I have a Model 12 and YES for adding a compressor to the Model 12. +/or incorporating mastering presets in a futur update. Just so the Model 12 could finally be a fully completly standalone unit without depending on a PC&DAW. Please make this happen Tascam. It's been mentionned enough already.

[@DrKunz]

Welcome back on the Model series! 👍 I would love to see a Bus processor on the Model 12! I noticed that on the Model 12 (f/w 1.42.0099) the PRE-COMP send point doesn't work when INPUT switch is set to MTR (instead LIVE works correctly). Anyone else?

[@lefessier]

I just gave this a try this morning and set to MTR with PRE-COMP send point with the latest firmware into track 1 via xlr and tracks 9/10 via bluetooth I was seeing on playback things working as expected. When playing back the individual track recordings I was hearing no compression, and I was hearing the compression when I had the SD to Main Mix selected as I think that plays back tracks 11/12 which have all processing that was done during recording, but playback via the channels directly seems to have no compression or EQ etc. Do you know the specific setup you are seeing this issue to try to recreate it?

[@DrKunz]

@@lefessier Thanks for sharing your experience! The issue I noticed is about USB Send Point only, in other words when I set it to PRE COMP there is no MTR playback signal transmitted to the computer. If I set the USB Send Point to POST COMP or POST EQ, the MTR playback data is transmitted to the computer.

[@lefessier]

@@DrKunz Oh I see! Very interesting! I have just been using my model 12 as a standalone unit so haven't seen this yet but will keep an eye out, that seems less than ideal for sure.

[@DrKunz]

@@lefessier I used my Model 12 exclusively dawless for two years now. These days I wanted to test how well it works with a DAW as an audio interface and as a controller, so I checked various settings and here we are. I sent an email to the Tascam support with a description of the USB send point issue, hopefully they will look into it.

[@RecordingStudio9]

Might want to have a look at the block diagram at the end of the manual for answers 😉

[@martinsouthall]

Another yes or the main bus compressor!

[@levelletate4551]

I’m surprised the EQ range didn’t increase a bit, I would have loved an upper/lower mid eq band on this desk. 😢

[@RecordingStudio9]

I know what you mean, but that would not only increase cost, but also increase size. You just have to make the most out of it 😉

[@midwestBS]

Love my Model 12. Yes, please. Sign me up for a master bus compressor/limiter!

[@Urfinchannel]

Yes please

[@ogelapix3188]

I agree. YES!

[@samuelmaylor6634]

Yes I’m a model 12 owner and would like this feature added

[@ancientbicycles7027]

Yes

[@johnisrael5183]

So....the Model 16 and 24 is probably the best for the Studio Thanks for the that informantion I think adding to the 16 or 24 would be smarter and sound better

[@RecordingStudio9]

As I mention in my video, it’s not possible to add the compressor to models 16/24.

[@catharsis2073]

Yes I’m a model 12 user owner and would like the compressor integrated in main bus. Thanks

[@jason5276]

+ 1 for master bus compressor

[@sojourner-kl6ei]

the M16 and M24 OG analog desks would certainly appreciate a Main Bus Compressor/Limiter. Firmware update please!

[@RecordingStudio9]

As I mention in my video, it’s not possible to add the compressor to models 16/24.

[@boxonrails]

YES for a Master Bus Compressor in the Model 12.

[@Cloud_Brn]

Another YES for model 12 user!

[@muppetpaster]

Deffo YES for the MBC in the Model 12....

[@iliaskotsambouikidis4590]

Yes for a master bus compresor🙏

[@notanotherjamesmurphy5574]

I’ve had a DP-01fx for 21 years. The thing that I hate about it now is that the buttons are often unresponsive after years of use. These buttons look like they might not have that problem

[@kxdi_waters]

Good idea!

[@RecordingStudio9]

Glad you think so!

[@BogoEN]

YES

[@YBS_EdTheRed]

Yes, I am a model 12 owner and petition for the master bus compressor be added to the model 12. PLEASE

[@EnricoMorrone]

I have a model 12 and it would be great to have a master bus compressor.

[@NinetysixTele]

Yes please add a master bus compressor to the Model 12. Thanks.

[@gutterne7145]

Well of course a big YES

[@dennismaberry-rhythmspirit2818]

this video states that the 2400 does not do DAW control like the Model 12 but according to Tascam's website the new 2400 does have a DAW Controller using the Mackie Protocol.

[@RecordingStudio9]

It simply supports transport control. No faders, pans etc.

[@dennismaberry-rhythmspirit2818]

That sucks. I would have considered purchasing one of these but not now. Thanks

[@SJH205]

@@dennismaberry-rhythmspirit2818I I wanted it for the exact same reason and now I’m going to save my money instead

[@xammai9679]

A model 16 would also be nice.

[@RecordingStudio9]

You mean Model 1600

[@michaelneal900]

the master bus compressor on the model 12 might be limited by processor capacity and memory

[@RecordingStudio9]

Possibly, as I have no idea what processor or code is being used. From my experience writing a simple compressor plugin in C++, the code can be as little as couple of dozen lines to actually do the work, but to link the parameters to the physical knob and display, might be 10x the code. I'm sure it's possible to copy the code over from Model 2400. I'm hoping :)

[@Stechamppn]

Does the model 2400 have a built in metronome....as my old dp 24 had one and if you used it and then used the built in effects....say the delay.it would be in sync... my model 24 doesn't have built in metronome...making it almost pointless to use the built in delay...it never lines up properly..hopefully the 2400 has sorted that.... the dp24 had some great figures missing from the model 24 ...saying that tho..it does have a nice sound to it

[@alexdawson7851]

Can the channel inserts be used when playing audio back from the SD card?

[@RecordingStudio9]

No. Inserts are for analog inputs only.

[@Patrick.Kopytowski]

Mastering on model 12 please!

[@QuestForGear]

Yes - Implement to the 12 and 16 !

[@RecordingStudio9]

Looks like you didn’t watch all the way 😉

[@mathewworkman1625]

​@@RecordingStudio9​@RecordingStudio9 I know why you are saying that but I dont agree. They CAN absolutely implement it on the 12 , 16 and 24. I don't care what the block diagram Is currently - they dont have to stick to that....they can make an improved different version.

[@RecordingStudio9]

@mathewworkman1625 That’s why they now released Model 2400. You just have to wait and hope for Model 1600 😊👍

[@mathewworkman1625]

@@RecordingStudio9 Yep. I'm completely aware of what's what. I have a 2400 on order - and I currently own a 24. Cheers.

[@eancurtis9333]

Can you treat each of the 4 busses with out board processing?

[@RecordingStudio9]

I guess so, yes. But, you will sacrifice twice as many channels on the return.

[@WarzoneVictoryWins]

Can the OG 24 use the Tascam App to see levels?

[@RecordingStudio9]

What is OG 24?

[@me_fault]

assume OG 24 = Model 24, instead of Model 2400, which could be seen as the new g

[@JohnnysaidWhat]

can you sum using this similar to the big 6?

[@RecordingStudio9]

Yes, the Model 2400 is an analog mixer. You can send your DAW buses to it, analog sum to the main and record the stereo mix back into your DAW.

[@hairbear8454]

Master bus is a no brainer

[@shckltnebay]

I assume this works with Pro Tools?

[@RecordingStudio9]

Yes. Works with any DAW

[@Noammats]

I so want to have an excuse to buy it! But my true recording time is decades gone now. I can only justify the model 12 really :/

[@michaelneal900]

Still has the teensy weensy screen

[@RecordingStudio9]

I think the idea is to have more tactile access and the screen is for simple functions.

[@flattardianspresident5502]

Tascam is the worst amateurisg brand that offer no support. The model 24 has had like 2 uodate, its a piece of trash i sold after 1 years im glad iv sold it. Flimsy button, if you dont turn a knob a while they getball dirty and scratch like hell. Now they fix all the shortcoming of the 24, but im sure they already working in a other crappy sub standard product they will release in 2026. Hell they recycled the crappy tiny scren and recorder from the model 24 in this one... tascam all about cutting corner from profit

[@talentohumano1859]

*I NEED IT ASAP IN MODEL 16*

[@RecordingStudio9]

Had you watched the video in full you would know that it’s not possible for M16/24

[@talentohumano1859]

@@RecordingStudio9 Ok. But I Mean a New Model 1600.

[@hellofx]

Stop begging and buy the new one .

[@stevencirile]

Model 2400 in action. kzbin.info/www/bejne/ommpeWxpecd6atEfeature=shared