I would like to see P770 vs 921 Forged vs 921 HM Pro.
@Millartime124 жыл бұрын
Was fitted for P790s. Looking forward to them coming in this week even though it’s end of season. Needed to retire my titleist DCI 962 from 17 years ago lol
@jacksoni3494 жыл бұрын
That must have been an eye opener?
@GolfRx4 жыл бұрын
I just put DCI in my bag, 6 iron 32deg .. hit them pure, replaced my modern 7 iron 31 degree clubs
@Millartime124 жыл бұрын
I hit my dci’s pretty well but very high and spinny. Even my “knock down” shots are 120-140 in height. Just figured nearly 20 years was time for an update. The lofts are going to be interesting to get used to. Will be spending some time on range top tracer to get an idea.
@Millartime124 жыл бұрын
Ian Jackson it was. But both will play similar so not worried. Thinner top line would be nice but not a deal breaker for me. I’m a 12-15 type capper who doesn’t have time to play a ton and isn’t too picky.
@GolfRx4 жыл бұрын
Brad Millar 💯 .. I hit them spinny as well coz of the shaft. I prefer them spinning to stick on the greens without rolling off. If your swing speed average you will be going on to the fringe with 790.. test Wilson staff model blades. Compare them .. they were the closest for feel and loft
@brandumb9252 жыл бұрын
I was able to hit a P770 6 iron after one was left in the tee box from a group ahead. Not ashamed to say I hit a couple balls before I turned it in and I have never experienced that crispness of the ball coming off the face before. I was in awe! I gotta get a full set of these in the bag soon. Beautiful!
@christianmarkuz55194 жыл бұрын
I have the P770 for almost two weeks now. These are by far the best irons I have had so far. The 5 iron is just as easy to hit as an 8 iron.
@erikcrossley50484 жыл бұрын
Awesome, and lucky based on the delivery dates I'm seeing. Curious how you would describe your ball striking?? I'm leaning towards the 790s in 4 and 5 then getting into the 770s. Not a very consistent Striker, but decent club head speed.
@bl63694 жыл бұрын
What shafts did you go with?
@christianmarkuz55194 жыл бұрын
@@bl6369 Nippon Pro Modus3 Tour 120, X-Flex. Played the same shaft in my old iron. Simply the best shaft in my opinion.
@christianmarkuz55194 жыл бұрын
@@erikcrossley5048 I do not have a 4 iron, my setup is 5 - PW. I am also not the perfect ball striker. I could hit the 5 iron of my old irons, but I didn't really like doing it. Had to put in a lot of effort to get a good result. Even bad shots with the P770s give me better results than my old irons. Especially with the long irons, the P770 has given me a big boost in confidence.
@bl63694 жыл бұрын
@@christianmarkuz5519 oh cool. I never tryed those shafts. I tested modus105 and hit them good but just felt too light. I ultimatley went with the KBS tours which gave me best numbers and feel.
@davemack4 жыл бұрын
Great video and a very sound conclusion, guys. I'd love to see a head to head between P770 and JPX 921 Forged and/or Hot Metal Pro.
@stephendibari50104 жыл бұрын
same here !
@luiscamarillo90204 жыл бұрын
Thank you for the reassurance. I’m glad i put in my order for 5-6 in p790 and 7-pw in the p770. Again awesome videos! 🙏🏽 Can’t get enough!
@antonsmith7434 жыл бұрын
I've gone for a combination set. Pw to 7 iron p7mc and then 6 to 4 iron in the p770. Absolutely love them
@robbayntun75924 жыл бұрын
Would like to see more off centre strikes with both of these since the irons are designed to be “forgiving”. Great job tho, keep’em coming
@erikcrossley50484 жыл бұрын
Would love to see a fit where you find the type of player that would benefit from these in like a 4-6 or 7 range but would out the MC in the bag for 7/8-wedge, and the process used to actually determine that?
@wallstreetoneil4 жыл бұрын
I think that is the definition of me. I'm a former cavity blade player (Taylormade C300 Forged Lehman Miura clubs), 20 years off, went to Mizuno Hot Metal Pros, weakened them, took the 5 iron out because didn't like seeing the back of the club and replaced it with a 24 degree HMB 5 iron (carry 197). Still take my Titleist AP2s out to the range, 5 iron when flushed is amazing but doesn't hold a candle to the HMB 5 iron. I could easily combo the MCs & P770s - 5 HCP, 108 Driver speed
@chrischampion7274 жыл бұрын
This! 👆🏻Paul O’Neil you sound like me. I started playing 3 yrs ago after taking about 10 yrs off and went from the old Titleist DCI 990 to a used set of the original P770. Didn’t care for the P770 in the shorter irons but loved them in 4-6. Went to MP18 MMC/SC combo. Best irons I’ve ever played but been drooling over the P7MC since they came out. So much that I ordered a 6 iron to my current specs and shaft to test. Love it! I’m a 7 hcp with a sometimes scratchy short game but a pretty consistent ball striker. I’m not getting any younger (51) and gapping 4-6 could use a boost. A potential P770 / P7MC combo has my interest. 6 iron 90-92mph and currently play PX6.5.
@wallstreetoneil4 жыл бұрын
@@chrischampion727 we sound like clones - if the MP20 MMCs had of come out before the 919 Hot Metal Pros, I would have instantly bought them after testing. I did a lot of blade testing over a few day period so I got a pretty good feel for my ball striking and which club/loft, having the low in the head Tungsten, really makes a difference in the slight off-center hits - and that seems to be for me a 32 degree 7 iron. While I would, believe it or not, hit the 34 degree MP 20 Blade sometimes further than the 32 degree MMC (i think it is the additional mass directly behind the ball), it was the 1 in 4, 1 in 5 shot, where it was hit 1 groove low, that you would lose 7-10 yards (safe on the course yes - but the loss is real) versus the MMCs which would never miss. I've really bought into the 32 degree 'modern lofted' 7 iron and then I've also changed my loft gapping to slightly larger spreads so I can spread the traditional 47 degree PW to 24 degree 4 iron lofts using 1 less club - and thus gain a club. I've had TXG bend my Hot Metal Pros to (PW,9,8,8,6) & HMB 5 iron to (47,42,37,32,28,24) to give me carries of (133,146,159,172,185,197) - I then get 3 wedges (52/57/62) and 2 hybrids (21/17) and 3w&Driver. I also use a lighter shaft in my HMB 5 iron a graphite Steelfiber i110 - in my irons I use the 120gram DG S300 - I also use the Steelfiber i110CW shaft in my 22 degree #4 Gapr High (playing open at 21 degrees). If I was going to play the P7MC/P770 combo, I would try and do a similar setup that I created - but in this case, I think the 7 iron would be the problem as I would like to have tungsten/help in the toe and heel of the MC in a 32/33 degree 7 iron - but it isn't there - and I wouldn't want to go to a hot faced hollow-headed 7 iron - and thus I think the P760 line is still useful. The Titleist T100s also interest me, but I would order the PW & 9 in the non-S heads and blend to my specs (I really like a 47 degree PW)
@erikcrossley50484 жыл бұрын
@@wallstreetoneil I don't think the 770 has a "hot face" and you could get the forgiveness and feel from it in the 7 iron
@wallstreetoneil4 жыл бұрын
@@erikcrossley5048 by hot-face, I mean it isn't a solid piece of metal. I was at a golf store today getting a wedge bent and I took a close look at the p770s - the PW sole width is an abomination - for anyone thinking of these clubs, order the P7MC PW instead. I would split the set at PW-8 (P7MCs) & 7-5(P770s) and bend the 7-5 to 32,28,24
@ITS_BOBBY474 жыл бұрын
Thanks! Since I have both the P790 long/mid irons and a full set of the P770, it is nice to see they will combo well together just by adjusting lofts...excellent!
@ianbroadway32453 жыл бұрын
Would you go combo set or p770 thinking poss p770 up to 7 and then p790?
@davidmccutcheon19034 жыл бұрын
Great video gents - this video reinforces how excited I am to get my P770’s with Oban CT 100 shafts.
@golf_is_a_happy_place99904 жыл бұрын
After 3 yrs with the p970s, I've moved to p770s following a fitting with Taylormade - I only found 3-4 yards in difference for me, but chalk & cheese with the spin, more hiehgt height & spin, 800rpm (but standard loft, so that would count for that difference) p770s so much easier to control (for me that is) - loved every shot with the p790s which have helped me improve my game, which has allowed me to move to an even better player irons for me. Great video guys.
@andrewrowley6253 Жыл бұрын
You guys make the greatest videos! I love the info I get from your reviews! Thank you for all your hard work!
@Drhurt36364 жыл бұрын
Great timing on the video. Just got fitted for 6-gap P770s & 4-5 in P790 with Oban CT-125 X shafts. Was scared about forgiveness bc I’m currently playing Titleist 718 AP1. Makes me feel better so I’ll probably buy them now.
@annefilippobertozzi76014 жыл бұрын
Great job as usual, guys. I have to test the p770s, but from what I’ve seen so far, it seems they’ve won the battle in my short list: mizuno hmb, srixon x7 and ping i210.
@bryceboring26154 жыл бұрын
I need to stop watching the videos that show the same category of club I just bought
@MurphyGreg4 жыл бұрын
Recovering from a knee injury so my golf is all through the lads of TXG. Thanks guys :))
@stephan52784 жыл бұрын
I looked at the 790s about 2 years ago and loved them. Got a great deal on Callaway Apex Pros and bought them instead. I'll be in the market again in the spring and will probably end up with the 790s this time.
@ermangus4 жыл бұрын
I was very sold on the Mizuno Hot Metal Pro until I walked by the rack with the p770. Some decisions to be made for sure.
@ryanrichardson99154 жыл бұрын
I love my 790's (4 handi). I only get out 1-2 times a month now, so the added forgiveness of the 790's is awesome. I would be interested in maybe combo-ing to a 770 8-pw maybe. This was just the test I was looking for! Thanks!!
@kylesinclair2034 жыл бұрын
Compare against the PXG 0211’s? I saw a test where the 0211 was very comparable performance wise as the Gen3 0311’s..... And at $89 a stick......
@monstermarine4 жыл бұрын
I own the previous generation P790's. Although they go far, I've found them to be 'heavy' if you know what I mean. I just tried the P770's at my home course, Rattlesnake Point. Let's just say I'm buying the 770's. They actually carried farther than my 790's measured on Trackman.
@austinfeliciano44834 жыл бұрын
Same here. The 1st gen does feel a little heavy
@gimbalair4 жыл бұрын
I love these when Luke Searle fitted me a few weeks back, but we couldn’t get them to stay straight, kept hitting a flat hook, hit the 790 got a lovely high fade.
@gimbalair3 жыл бұрын
@@zacharycuthill5060 I just leave it to the fitter bud. Lovely clubs. Just couldn't find a shaft that would give me the numbers and the flight i was after. (his words not mine)
@lkae43 жыл бұрын
A lot of players pick 790 over 770. A lot of very good players too.
@nceebee68594 жыл бұрын
So, It's all aesthetic? What's the outcome of performance across the face? I was hoping they dialled it in for greater consistency.
@docomo6614 жыл бұрын
Currently playing P - 6 P770 standard lofts and P790 5 & 4 lofted to match the P770 5 & 4
@drobster1003 жыл бұрын
Thanks to youtube and all the talk about how chunky many of the irons being reviewed are, the top line on my P760 irons is the biggest I can overlook on most shots. There is always a shot or two during a round though where I think, jeepers that top line is BIG. I otherwise really enjoy them.
@ph4694 жыл бұрын
Im really confident with my 5 year old Speedbalades full set but looking to upgrade. Been looking at the 790 as a full set, but the short irons on 770 sounds plus a more forgiving long irons 790 sounds like a great option. Thus is the perfect info I was looking for. Thank you.
@danjohnson62922 жыл бұрын
I wanted to get the P760. Hard to find off the shelf and no option for custom set. (August 2022) Would love TM to come out with a new version of P760
@travisgetty71444 жыл бұрын
Great video, I love how technical you get. Would love to see TM P7MC vs. Mizuno MP-20 MMC.
@BAA35954 жыл бұрын
Had a cool test idea. "Longest forged iron of 2020" with each iron set at the same loft with same shaft as in this video. Maybe pick longest forged iron from each manufacturer. Great video as always!
@zaheerkader74264 жыл бұрын
Now this I would like to see .. not 5 irons stamped with a "6" on it
@canyonaro4 жыл бұрын
Callaway Epic Forged or Cobra King Forged Tec. Both are rockets.
@jacobbrooks15764 жыл бұрын
What kind of ball was being used in this test? Just wondering if you loved theirons but needed a little more spin if you could just add a higher spinning ball for the extra help
@glennwisse62714 жыл бұрын
Great review guys. Looks like a winner for Taylormade. I can see this and Mizuno’s Hotmetal Pro battling it out for top selling irons.
@2222skinny4 жыл бұрын
T100s by far a better iron
@mikemaupin83644 жыл бұрын
Whats your opinions on p770 vs apex pro 19 as far as forgiveness and flight characteristics?
@jasoncormier42764 жыл бұрын
I’m playing the 770’s . So far two rounds and several range sessions. Absolutely love them. Im getting plenty of spin with the scoring clubs and just the right amount of forgiveness in the longer irons. I was playing Srixon Z Forged MB’s.
@MikeFaraci4 жыл бұрын
Very happy with my 790s, but I wonder if the short irons are similar between these two because you lose the hollow body and speed slot in the 770 below the 7i.
@MrGoGetIt504 жыл бұрын
@txg. Is there a big difference in swingweight? I play 1.75 over standard so I’m worried about a combo set of 770 and MC. Play a CP2 oversize with 6 extra wraps. MC are stock D3 and 770 are D2
@kourt24694 жыл бұрын
would love to see you guys do a trackman vs gc quad test indoors. Highlight the pros and cons of each - would be helpful for us going into fittings where someone has a trackman to be able to know what to expect numbers wise, etc.
@lhg44654 жыл бұрын
Years ago(15-18) I played the ICW 5's by Taylormade. The 3-6 were cast/ perimeter weighted with an enclosed back to look like forged and the 7-PW were forged. They were ahead fo their time I guess. I am up for a fitting in mid-October and am looking forward to the iron combination conversaton
@timseebold23554 жыл бұрын
I got a full set of p790 a few weeks ago, moved from Titleist mb’s. Feel and feedback are very different. But you can still shape the p790. Still bedding them in but might drop back to MB’s to compare again. Nice work lads, keep up the great content! 👍
@garyhovey93054 жыл бұрын
Another great piece of content....those two models side by side with great data....super helpful for the consumer. Bucket list item is a one hour fitting with Ian.....your clients must feel totally dialed in
@tims98814 жыл бұрын
How do the P770/790 compare to the Wilson D7 Forged?
@ahastar11414 жыл бұрын
Would be interested to see the p770s vs the Mizuno HMBs
@matthewvenet10824 жыл бұрын
Playing 716 ap2 11handicap. Was fitted by Taylormade rep for combo set p770 A wedge to 7iron and p790 6 to 4 iron making my 4 hybrid redundant. Want to get 790 long irons on the course before pulling the trigger
@colinmorgan10253 жыл бұрын
Just wondering if these are draw biased . Went for fitting and had 105s dynamic gold Voss but always around 6 deg closed face . Struck well . T200 1deg closed but only had AMT shafts . Hit straight but 10 yards short less efficient not solid strikes
@alexanderortega80024 жыл бұрын
Excellent video guys! Recently I was getting fit by a Taylormade rep and he noticed a slightly more spin, less distance from the 7i P770 in comparison to the 7i P790. Given the difference in stock lofts between these clubs that seemed logical. Your experimental data shows equally lofted the clubs would perform nearly identical. Rather than accept the difference in lofts as the disparity between clubs the rep thought changing shafts between both sets would be better than manipulating the lofts. He suggested I should be fit for P770 with KBS C Taper or P790 with KBS $ Taper. This seemed well and fine until I watched this video. The idea of combining the 2 sets P790 (3i-5i) + P770(6i-AW) seems like a good idea. I would rather tweak lofts for gapping rather than have 2 different shafts for the 2 sets of clubs. Thoughts? Could you guys clarify how you would gap the irons? The video is a little confusing as to degrees of loft for clubs. Video mentions P770 4i @ 21*, 5i @ 24.5*, 6i @ 28*. Wouldn't the P790s be the longer irons and transition to the p770s for the shorter irons?
@michaellarko77314 жыл бұрын
New viewer here - big fan so far! I was fitted for P790s about a month ago and cannot wait until they arrive later this week. It's going to be a huge improvement over my 10+ year old Callaways. Keep up the great content!
@emak45582 жыл бұрын
Finally !!! Somebody testing at equal loft. Thank you.!
@johnnywunder6234 жыл бұрын
@txg great vid boys. I thought Matty Boy might spin the 770 a bit more but really cool to see they were literally apples to apples. Crazy good irons. I found I hit them exactly the same but my spin rate went up quite a bit with 770 all while maintaing launch, speed and distance. AKA Unicorn irons:)
@gilbertamthor50984 жыл бұрын
Great video guys. Really good to see if your a good ball striker that 770 is a better fit and if u miss a few sweet spots 790 might be a better choice👍
@MrMavrix4 жыл бұрын
I really like your videos and the approach which you’re using for the different fitting. I recently ordered the 2019 P•790 with a Nippon Steel 950GH neo shaft... -1” and 1 flat! I’m really interested in your opinion in regards to the shaft!?
@chrischampion7274 жыл бұрын
Great comparison! I would love to see a head to head with P770 and the P7MC for those that think they would be a killer combo. I know they’re a completely different design but how would you rate these vs the original P770? I played the original P770 and loved the forgiveness of long irons but the short irons just looked and felt kinda chunky to me so I moved on to MP18-SC.
@katalystbu4 жыл бұрын
I agree. Taylormade have a blending chart between the sets but comparing a same loft 770 and a 7MC would be great to see.
@altaylor57854 жыл бұрын
My set of p790 4-6 and p770 7 - AW should finally arrive this week despite being ordered in late August. Oban CT 115 stiff shafts. I’d be interested in your views on how to gap the bridge between p790 6 and p770 7. I think the fitter has recommended adjusting p770s to meet 790 lofts i.e 7 at 30.5
@ianbroadway32453 жыл бұрын
Would you combo again or just go 770 or 790?
@claytonentrekin66884 жыл бұрын
you guys should do a review of the new Haywood Signature MB irons
@trevorarmstrong45514 жыл бұрын
Current gamer 620 MB 7 iron (35) carries 174. Testing P770 (33) and 7 iron carries 190. Concerned about gapping as set gets shorter. Bend weak or combo with MC/MB to control yardages?
@Boss302ATC4 жыл бұрын
Forgiveness and extra (needed???) Distance vs consistancy of distance on good strikes and workability, do you feel you need distance or forgiveness? I'd you are still happy with a MB I would stay there, I feel like the downside to Matty testing is these aren't clubs he would play - they go too far! The best addition to the channel would be a slow speed Matty, that would be a game changer IMO. PGA players aren't great real world examples for us hacks, but watching JT these days smooth his irons instead of smashing them makes much more sense. Take one more club and swing smoothly, which may now make the case for the 770s??? Otherwise grab 770s and buy another gap wedge and lose the 4 iron!
@frankcinotti34164 жыл бұрын
Purchased the P760's in January. Love them! Most consistent iron play I've had in a long time. Took me a few months to get comfortable with them, but very happy with my purchase.
@10asseed4 жыл бұрын
I just got fitted a couple days ago at Golftec, 790 is what I ended up with. I like the 770 but on miss hits the 790 just out performed the 770 for me.
@DaNnYElLoCO234 жыл бұрын
It would be interesting to see a comparison of the 2017-18 P-770s vs the new P-770s. I own the former and would be interested to see the differences in performance. Thanks, guys!
@damiendabideen82684 жыл бұрын
How does the P760 compare to the new P770? I have hit both and still prefer the feel of the P760.
@jacobmassey464 жыл бұрын
Perfect timing! Deciding between these 2 irons right now. May go the combo route. Thanks for The great info. Any advice for shaft If I want more spin? My iron spin is a bit on the low side (around 4900 for 7 iron when i was getting fitted) Was thinking NS Pro 950 GH Neo, would love to hear your thoughts.
@jacobmassey464 жыл бұрын
Pretty sure I got the last set of 770s I’m the DFW area lol. Got the display set
@jackvliet4 жыл бұрын
Nice video, best product reviews on KZbin.
@sstewart23854 жыл бұрын
Another great review guys. Any chance you’ll review the Wilson D7 forged? I imagine they are similar players distance irons. I’m looking for a fitting and new set of clubs....and I live way up in the NWT. Keep up the great content.
@luispantin14 жыл бұрын
As soon as I’m able to take a flight to your location I will travel for a full bag fitting... my bag today: M6 Driver D3, Ping G30 D3.5, P790 D2.5 from 4 to 9, ALL CLEVELAND WEDGES... PW 45 D4, GW 50 D4, SW 54 D4, LW 58 D4...
@joel1572 жыл бұрын
Can someone explain his combo lofts? Saying he would do 21...24.5 and 28..on what the 770's? I don't get it. Taylormade has a chart that recommends combos and what to bend them at.
@gregors924 жыл бұрын
What would be some good options for someone who needs essentially the opposite of this? I’ve got some P790’s but I tend to be a bit steep, but have a fair bit of forward shaft lean, goes for miles but 15 yards roll out on an 8 iron (155-160 carry)
@canyonaro4 жыл бұрын
You are the player P770 is made for. This tested them bent to the same lofts but the stock loft of P770 is weaker & will give you much more spin than P790 at stock lofts. You will lose some distance though.
@simonfolbigg4 жыл бұрын
Love all the info you guys provide. Thanks. How would you gap/fit a combo set of Titleist SM8 60, 55 and GW, Mizuno MP20 PW - 8 iron, Mizuno JPX921 TOUR 7-5 iron and P770 4 - 3 iron? Would you make the blades stronger lofts or fit longer shaft to make them go further? Would you use the same make and flex of shaft in all the irons except the 60 and 55? I haven't see much discussion about choosing the length of shaft in irons or deciding on the most suitable swing weight. What is the process?
@keithn14 жыл бұрын
Hi guys, could you please do a video explaining how one set of irons can have constant gaps of 4 degrees through the set and a different have gaps starting at 5 then 4 then 3 and sometimes 2, I just do not understand how you can get proper gapping, would absolutely love for you guys to able to explain or explain the problem, thanks Keith 👍
@teerex84884 жыл бұрын
I love the idea of combo’ing clubs in the set. 790/770/P7MB could be nice. Where would you look add the blades at the bottom of your set? Would you intro it at the 9-PW? Or would you start the transition at the 8 iron? I have a full set of Titleist 716 T-MB now and I struggle with my scoring clubs 7-pw. The feel with these just isn’t where I want it to be and I’m looking to change things up. Looking at U500/CB/MB combo if I keep it in the Titleist fam. Thanks for another great video.
@2222skinny4 жыл бұрын
T100s all the way by far better feel
@MrAhuraMazda4 жыл бұрын
Can you do the Tour Edge Exotics EXS Pro model? You guys had great results from an unfitted standard but never got the pro model. I think with the smaller head it could be a real beast. Looks like the perfect combo of Epic Flash and TS4
@jackiechow8604 жыл бұрын
Would you recommend combo-ing the P770 with the P7MC? Do they differ a lot in feel?
@shawnduench77013 жыл бұрын
First off great breakdown of the irons. I'm in the market for P770 even though I haven't hit have hit the 790's. Thinking of combo set 790's for 4/5 and 770 6-pw. How would you gap these clubs. You had mentioned 4 at 21 5 at 24.5. Would you then strengthen the 770's by a degree? Thanks!
@tomparker17754 жыл бұрын
Great video team. Question, what model Nike shoes is Matty wearing??
@ThomasPlaysGolf4 жыл бұрын
Matty seemed to have a better dispersion pattern with the 790. what do you attribute that to?
@jarakaki33204 жыл бұрын
Would love to see P770 vs JPX 921 Tour or Forged
@marcuszettergren88854 жыл бұрын
These game-improvement irons are incredibly easy to hit in comparison with previous game improvements. I came from the Nike Covert Forged 2.0, a great iron in its time, and swapped to the MP-20 HMB, an iron very similar to the P790/P770. (tested these too). If you only look at them coming from an older iron, you might be scared and think blades, but man, these are so easy to hit, i'd say a 20+ hcp player would fit these just as good as a 5 hcp player. I really recommend try these irons out if you get a chance. These are a real game changer for a whole lot of people with old irons. You do not need to hit these hard to have use of them either. As someone else said below, a 5 iron of these is as easy as the 8 iron of the old. It truly is.
@agentoranje37133 жыл бұрын
Hi Guys. Excellent content as usual. I don't like strong lofted clubs as i don't struggle for distance but the p790's might suit me better in terms of confidence. Is it possible to change the loft of the p790 to be even as high as the P7MC or P770? Would this ruin the club somehow? My local fitter was suggesting that anything more than a 1 degree change would be too much. Thanks.
@shaneducholke3644 жыл бұрын
Was pleasantly surprised how similar the were across the board. They will be one that I expect to hit when I fly over from Edmonton to get fitted in about a year for a full fitting when my rotator cuff is healed and I get my game back close to normal. So if you went 790 - 4 iron, 5 iron and 770 - 6 iron, 7 iron, 8 iron what would be the model if you wanted to move into something more blade like for the 9,PW, GW. I recently switch from my cleavland GW because it was a smother tradition since i chip with my PW a lot and I really like playing those similar chips shots exactly the same with either clubs. Would that model selwaalunsyagger your clubs?
@PbD1874 жыл бұрын
So I currently game the original P770 what would be the overall difference between what I have and the newer version? More forgiving, less forgiving, faster ball speeds, anything?
@suprand4 жыл бұрын
I currently game the 2019 p790s. They have been great clubs for me. That being said, I’m ordering p770s after getting fitted. Was worried about forgiveness but that went away after going to hit them on different days. Maybe it’s the more traditional lofts in the p770 that gave me tighter dispersion without any real distance loss. Also agree with softer feel like Matt said. I also went through the pxg fitting process. Was a good experience but I felt the Taylormade p790 and p770 were better for me.
@ioneil18084 жыл бұрын
I've really been enjoying the P790s. Also Matt might be the best golfer in the world.
@MrBrasserie4 жыл бұрын
Old p770 vs new? Currently 2017 set and intrested if its worth changing
@joedoaks65174 жыл бұрын
I have played the original p770's since they were introduced. I have hit the original vs the new p770's outdoors, but not on a machine. IMO, the original p770's feel better, and respond more like a players' iron. I noticed no increase in distance with the new p770. I love the look of the new model. I think the new version is very good, but I prefer the feel and playability of the original. Your experience may differ.
@v4sen932 жыл бұрын
Great video although I do wish with both clubs you would purposefully hit few bad shots (off toe, heel, thin it) to test the forgiveness difference of each club.
@wayneowens16494 жыл бұрын
Can you do a comparison between 921 Forged v P 770 currently playing i210 looking for a few extra yards de to age 61 . 7 iron carry around 150 yards. ps what’s your thoughts on power speck in the i210 👍🏴
@albertofernandez-sanguino33734 жыл бұрын
Would love to see a comparison with the Ping i500. Thx guys
@Borkybaby4 жыл бұрын
I play the p730’s. And they’re the best club I have ever used!!! Won’t change... until the faces wear out haha.
@ronlandry76724 жыл бұрын
Great video! Still playing the OG P770s and love them but intrigued by these new versions. Was Matt using his typical shaft (DG X7)? Does he use that shaft for all of your iron tests?
@keithn14 жыл бұрын
Hi guys are you saying you would weaken the 790 ‘s in a combo set as apposed to strengthen the 770’s, thanks Keith, great videos btw
@dellie1824 жыл бұрын
Probably depends on the loft of your gap wedge. I have a 48 degree vokey, so I strengthened the 770 from 46 to 45, and weakened the switch to the 790 in my lower irons by 1.5. But if not considering the gap wedge id probably just weaken the 790s given how hot they are.
@isaackim40874 жыл бұрын
I have been waiting for this video. Thank you!! You guys are awesome
@hectorohh3 жыл бұрын
Man so many good clubs, they always make it hard to choose... Been thinking of the p77s tho
@joelfarris43034 жыл бұрын
Is there any heads with similar size /Playability of the p770 that you would label as high spin for the player that needs more spin?
@erikcrossley50484 жыл бұрын
Interestingly, for me the p770 spun more traditional and higher than my Srixon 785s and flew the same distance as the 785. Forgiveness was the main factor that has me wanting to put them in the bag.
@chill09024 жыл бұрын
I currently game the 785s and love them. But I hit them high and don't spin them a ton. Worried about hitting 770 too high. Where you kinda low with the 785s?
@erikcrossley50484 жыл бұрын
@@chill0902 I have Modus 120s in my 785s and they fly pretty high. I like the trajectory, stop pretty much where I land them which I love (on solid hits). The 770s were higher but didn't seem to float at all.
@clintvanzyl84974 жыл бұрын
#TXGTourExperience I’m thinking of returning to golf and as a previous +3 handicap golfer I’m looking for something modern and a bit more forgiving than my last set of clubs. I went on a launch monitor the other day and am swinging a 2018 P790 at 94-96mph. I’ve always been a high spin player but that makes playing in the wind a nightmare. Do you think these P770’s with an X flex Modus 120/130 would be a good idea?
@tiger05rtc4 жыл бұрын
dudes got about as good a swing as one could have. Technically extremely sound.
@thisjustanother4 жыл бұрын
its insane how consistent he is too. every shot is almost robotic and precise he is lol
@steelydan83123 жыл бұрын
i have watched a ton of your videos this dude is a machine.
@CanadianBiz4 жыл бұрын
Could we get a shot shaping test, p770 vs p790?
@nigelday0014 жыл бұрын
Very interesting review, I would like to see a cobra king forged vs p770 ..😉🏌️♂️⛳️🍻
@brodyconroy32843 жыл бұрын
P760 is a combo set between a 7MC and a 770 so now they split them up and made them compatible for combination
@Coda18504 жыл бұрын
Are these irons similar to the Sub70 699 irons?
@joedoaks65174 жыл бұрын
Ian, I recently went through a driver fitting and learned I am a low spin player. Would P790's and P770's, perhaps, not be the best fit for me due to their low spin nature? I am currently playing the original P770's.
@joshackroyd5004 жыл бұрын
Maybe a higher spin ball could help too
@whiskerrub4 жыл бұрын
You know your TXG groupie when everyone around knows not to disturb you on TXG Live Monday...and even better what they don’t know won’t hurt them. 😂👍 🤫
@banditbaker16754 жыл бұрын
MrsBandit has been asking why I have been even grumpier than normal today! I told her that I'm worried about the World geopolitical position, but she just gave me that withering look and said, "Ian & Matty are having another Monday off aren't they"? Foiled again
@michaelpoenar4 жыл бұрын
Thanks for another great video! Would love to see someone that is mid-high handicap hit a variety of irons from performance improving to player's irons, and getting their thoughts/hesitations from the lot. If you can't find a high handicapper willing, I make the perfect candidate :p haha