CUMMINS Swapped FORD Gets A Makeover And Hits The STREETS! Fummins Build Pt.20!

[@Thenightbelongstous]

Who else on YT can build pro-am drift cars, do their own fab work, swap/build a truck, and be this humble and genuine? Coolest creator on the platform, such a rad dude. Deserves WAY more subs!

[@JackoD.]

Straight up! Fuck he is definitely one of the KZbin legends I’d love to meet and drive with, very skillful and amazing personality 💯

[@mr_naitsabes8022]

Motionautotv can du that but Taylor is better

[@nastyy.8582]

Id love to just hang out with him and wrench on some cars while passing a fat ass doink around

[@vattenkatt]

Yea could not agree more! Can't think of any other creator that is so respected by all other YTers in the car community.

[@christopherwarnecke4858]

@@mr_naitsabes8022 I love taylor to death but trevor is one notch up. Can tune by himself and do really good paint/bodywork. Anything Taylor can do trevor can do as good if not a little better

[@NeverFightYourMind]

If humbleness was a person : Taylor Ray

[@joatmon7621]

Forreal though, one of the most genuine, and cool people on youtube

[@chrissyaerts9821]

I think he’s pretty great

[@TheDogHousetv]

I always holler to him at drift events, i catch him off guard and tell him to keep kickin’ ass. He’ll always respond 👍🏻

[@stuffandjunkandthings364]

check the jack kit under the rear seat. If they're loose, they make a similar racket

[@trentdawg2832]

My duramax does the same thing....I never thought to check the jack....good call!!......I always thought it was the seat belts rattling.....luckily I have beat and I just turn it up!!!

[@zachschorr5550]

Best content and attitude on youtube 100%

[@pedroleal8183]

I tought the same thing as i looked at the time of release (47mins earlier) and the number of views and likes on the vid. Thats why he has such audience. Edit: me included! Lol

[@zachschorr5550]

Pedro Leal I genuinely don’t know how more car people don’t see how great he is

[@Devan_Dunn]

Agreeed to the both of you

[@joeystrittmatter6890]

100%

[@Silverboy005]

The satisfaction of clearing that loud sound inside the cabin aaahhhhh 😊

[@WhipsawWillys]

Oh noo, im not that far in the vid yet. #spoileralert

[@masonthibodeaux4060]

I've been thinking to myself that the damn thing has rod knock this whole time🤣

[@MrRedstoner]

@@WhipsawWillys Then why are you in the comments if you don't want spoilers?

[@ctskifreaks]

22:30 - Taylor....you have a hat...and a visor...just use them lmaooo

[@KWC0]

Lmao I was looking at that big ass visor aswell

[@wobblysauce]

Ha, same thing.

[@Taylordrifts]

Idk why but I hate using visors. lol

[@SirBoostAl0t]

the squeak is the back seat upper mount against the rear wall. My Denali did the same thing and drove me nuts. You can see the rear seat shaking back and forth from a speed wobble(get that sorted lol) I just cut that mount off and the seat swung forward enough for some extra storage.

[@johnnavarro365]

you can see the back seat shaking lol

[@ghassenellafi8478]

You're definitely 100% on the spot , plus he needs to check his engine mounts because the engine gets a little bit roudy at a certain frequence if the mounts are old

[@SirBoostAl0t]

Use a magnet to keep the seat in place btw

[@zfreak2808]

Even the goats are excited that your going to finish up the Fummins.

[@neiljones3818]

They think it's a Ram.

[@jameslastname9171]

.... a Dodge Ram. >groan

[@Matty.Hill_87]

@@neiljones3818 🤣🤣

[@MrJohnv8386]

Goat they know greatest of all time that's this build

[@MarksChannel52]

When you show up to a dodge dealership for parts.

[@nungal573]

Mark Smolarek oof

[@jimmyboe25]

he should take it for a service at a dodge dealership or ford whichever

[@dinho890i]

Paint correction and interior next?

[@Leofred2000]

Definitely interior. Its more gross than my dad and he doesnt like showering

[@dinho890i]

@@Leofred2000 bruh 😂

[@matthewf1979]

I love that we’re getting more and more Sandy content. 👍 for kitties.

[@redrice589able]

The lack of a 4th gear is the 5R110 doing its thing does a 3-5 shift and you dont use 4th unless under 32°. And the gearing if the axles are oem you can check the axle on the door sticker and google it. 1800rpm is peak torque for the cummins vs ford is around 2100rpm.

[@dsruddell]

thats the one problem with fummins swaps. the v8 engines rev higher naturally. i feel any cummins truck that isnt lifted should be running 3.55-3.73 gears. your truck probably has 4.10s and thats why its doing 2k. youll start sucking fuel at 2k. cummins loves to cruise 1600-1800rpm. fords usually have 3.73 or 4.10s (excluding f450+) i personally think lifted duallys are useless. when you tow youll end up rubbing the rear duals together and blow them. i forget how tall 19.5s are but you may be able to swap those on and lose some revs on the freeway. i honestly wouldnt run 19.5s because of how rough they ride but i live in california our roads are HORRIBLE. your roads look better. i also like your year with the older dually bed fenders.

[@andrewkelly3702]

When are you getting that thing detailed?

[@loganjames4607]

Underrated comment. The interior is driving me crazy. lol

[@redactedmind7115]

Chris Fix Here! He knows how to keep paint looking good. The 96 Corvette never re sprayed and that TrailBlazer looked like previous owner cared about that SUV from day it left dealership.

[@jasonaldenhaley1]

Ready for "Let's detail a Fummins!"???

[@mattie3349]

Semi wheels and a polish would make this truck unreal! Good job Mr Ray!!!! 🤟

[@JuPac420]

You are my favorite youtuber, hands down the most interesting, thoughtful, knowledgeable, and detailed wheel man on KZbin ever.

[@jbperformance3123]

Can we appreciate his weight loss

[@RatomirFilipovic]

Did you see his gf, he better lose some weight or she leaving :D... JK ofc

[@dcNo5]

To do list should look like this: -steering wheel -windshield And then other stuff. I know you want the truck to look right but think about yourself and make it pretty inside. Also clean the leather please.

[@jeepwrangler111ify]

Ceramic coat the headlights and it will help prevent oxidization and keep them from pitting.

[@liammcgeath6665]

I love the positve attatude and genuineness you bring to your channel one of the reasons ive been watching for years. The truck looks sick super cool to see you rip it around.

[@MrAzsplit]

Always makes me nervous when he’s pulling the truck in and out with the garage door half open.

[@BIGFOOT-ENT.]

Especially with the good up

[@LifeofMarcus]

Big facts

[@zackperata2847]

Also great to see sandy approves

[@BIGFOOT-ENT.]

Sandy is a nice touch

[@DriverJizzle]

My favorite build series ever. You’re a Swiss Army knife fr.

[@jaygood87]

Sandy the cat defo gives the garage videos that extra added sauce lol love the videos taylor 👌👌👌

[@andrewm007]

I like how clean you made this truck👌👍One of my dream builds

[@juliomoisa1172]

“Kinda looks like a dodge” well taylor it is kinda a dodge now lol

[@SirVic42]

Sandy always comes out for the Fummins!

[@diesels4774]

Definitely wax your headlights to keep them from yellowing, do it on all my cars and works like a charm

[@fb.9292]

Foil them

[@JZEFPV]

PPF would be the best way to keep them fresh. Protects from scratches, chips, and yellowing.

[@pratt1bp]

@@JZEFPV sure is the longer lasting protection over wax or ceramic coating them. If he uses Ultra he will get about 10 years out of the film.

[@chrissyaerts9821]

Sandy is hyped about the truck

[@jaydub8576]

Taylor, do an interior detail video or do a collab with a detail-tuber. Also get one of the stitch-on leather steering wheel wraps and do the baseball stitch. Super satisfying.

[@1leggeddog]

Honestly, i looked at your other builds but this fummins is the one i see you be the most excited about and it makes it even more fun to watch

[@kjmahanna5138]

It makes me sooo happy to see someone else happy with the work they’ve done on their vehicle.

[@davidblanck4131]

Taylor, you can thank me later for this cheat code. Turn the key on seatbelt off engine off with parking brake set. When the seatbelt light turns off after a minute plug in and unplug your seatbelt 3 times. When you plug it in the 4th time, it will flash. When the seatbelt light stops flashing, turn the key off. This disables the seatbelt chime. Repeat the process for the passenger seat. If I missed a step, check out KZbin videos on seatbelt chime delete for ford. Obviously, always wear your seatbelt on the road. Mainly, it helps for cruising around your property at slow speeds. Congratulations on the first drive. I would love a cummins swapped ford.

[@bryanaguilar2626]

Taylor I understand the excitement over headlights and tail lights they transform the car or truck, looking good!!

[@JimmyZ408]

Probably the nicest Cummins conversion I've seen in this truck! Job well done Sir..

[@Ramcat_Vlogs]

Should totally add pods to your rear bumper makes seeing for hooking up an detaching a trailer a world of a difference at night

[@danielpearce33]

Congrats Taylor, You're a one man crew with the amount of stuff you accomplish... respect bro

[@scottyknot7403]

Haha. I get the same feeling when things work correctly!! Awesome. I'm glad you kept the ford body!! Keep up the hard work and if you need help I'm always down to put the truck/shop to use!

[@bryanmoro7564]

Do the steering shock like nobody wants a death wobble

[@jaredanthony8070]

Death wobble comes from loose or worn parts. A steering stabilizer helps transmit less impact from bumps. He replaced all the balljoints and drag links as well as the steering box so there damn sure shouldn't be any loose or worn parts😂

[@pbking442]

@@jaredanthony8070 there are new trucks that end up with the death wobble with nothing broken.

[@mihailpetrovici5044]

I think he bough something more "special" anti death wobble

[@SirVic42]

Did he ever torque down the cab bolts? I remember him saying he was putting that off until he was final on the drivetrain, etc., but can't remember him saying he did it. Could that be a possible source of a highway speed death wobble?

[@bryanmoro7564]

Jared Anthony that’s how you know you haven’t owned a dually or a Ford truck trust me if he did change it it’s most likely the stock one and he needs to buy a better one because ford trucks have a death wobble even the 2020 trucks

[@mitchellholroyd2837]

I absolutely love that you love your shop cat!

[@JeremiahHartmanPhotography]

So stoked your first drive went well! I know that's a relief!!!

[@eightsixauto4916]

Crazy bro. The culmination of all that hard work. So dope to see it go down the freeway. Juiced to see new videos of you towing your cars to drift events.

[@FanatikBuilds]

With the rattle gone, all I hear now is turbo spool! Sounds glorious! 👌 Great job as always Taylor!

[@paulbawden2293]

Good job on the truck it’s awesome ps ur drifting at the freedom fac was out of this world 👍👍

[@codystepanian9558]

The bumper with lights made a huge difference. Nice job man!

[@SloppyMechanics]

Man that thing is nice

[@jeremyeubanks2387]

The cat ...quality control officer

[@ifan3270]

More like compliance supervisor haha

[@travisreising3972]

Upgrade the cab light to led lights but don’t get the ones are smoke out

[@kylecube15]

You sir are correct i hate smoked lights i want all the lumens

[@ricochetey]

@@kylecube15 Yeah plus they do not match the other lights on the truck

[@travisreising3972]

ricochetey agreed just would look weird with smoke cab lights I mean it would match the truck since the truck is black but he doesn’t have smoke out taillights or headlights so it would look weird

[@travisreising3972]

Joe Stacks agreed but they got to be LED since Taylor already put LED headlights and taillights just to match the truck

[@Leofred2000]

He should get red and blue ones with alternating flash for traffic jams and lane hoggers 😜

[@provenceperformanceracing]

Taylor “Ice-cold AC” Ray, the man. Such a cool build dude, I loved watching it come together. Thank you for being the best KZbin channel out there. 🙌🏽

[@cd2681]

Hey Taylor I love seeing Sandy the cat

[@Lukipela01]

So happy for you to finally have the fummins on the road. Can’t wait to see the final steps with it complete

[@SDSBBQs]

*High Five* DUDE, this entire build has been so awesome! You Sir have done a kick ass job with another one.

[@freddievilchez3417]

Awesome job Taylor great work and over all so much patience in all your builds congrats on all your builds you have a big fan here.

[@KWC0]

She is looking perdy... Nice job brotha... U killed it. Excited to see it with the semi wheels

[@kylesliger1137]

Taylor, try using FORscan to make your fogs turn on when you want them to. Worked great for a 2012 F-150. Theres a ton of possiblities with the software.

[@MrZombies24]

Stock cummins are definitely slow, even the new ones feel “gutless”. Tune will wake it up

[@ghassenellafi8478]

They can take a lot of abuse even when heavily tuned you're right

[@CMgraffix]

well done Taylor, mesh cover in front bumper to avoid bugs blocking the radiators grills

[@MrJohnv8386]

Best truck you can own good job taylor this thing is sweet

[@agenericaccount3935]

Gosh, your aesthetic ability is on point. The headlamps you picked are brilliant. Advice tho, spray paint the charge cooler anywhere it can be seen through the center bumper opening. Symmetry.

[@zackperata2847]

Love the new lights!! You can always clear bra them for longer protection

[@MrTdogg175]

That noise is definitely your rear seat mounts. Under load when the throttle harmonics are vibrating mostly the entire truck if the mounts are loose on the rear seat or worn out they'll make that noise. Watch back on your clip every time it was making that noise your rear seat was jiggling around a bit while everything else was mostly stationary.

[@Shadow0fd3ath24]

Those new lights and that bumper made it look great

[@RedSunrise91]

Trucks are a bit of a guilty pleasure over here in Europe, but man i would love to drive this on long trips! Good job Taylor!

[@franklindeesullivan]

That thing above your head is to keep sun out your eyes! Sun visor

[@bryanglenn123]

That's An Amazing Feat! You Built The Perfect Truck! I'm Very Impressed!

[@HatchieeOG]

hell yeah taylor! youre killing it dude

[@ttss8526]

For the time it takes to edit in those little back round noice, so worth it!! Funny as hell!! Love the videos!!

[@orinmurphy7324]

Let’s go fummins build

[@marknewell7355]

Also Taylor has got to be the most humble youtuber and fantastic content

[@funkingonutz1170]

I'm usually not a fan of how some aftermarket head/taillights look, but those flow with the truck really well

[@Gettinbentoffroad]

Definitely one of the coolest Fummins builds out there

[@cheesepizza87]

Couldn’t be happier for you, that noise difference was madness, it’s sound awesome 👏🏽

[@Khorsathedark]

My favorite external pieces you added were the tail lights. Those are a drastic improvement over the stock ones.

[@maldenfoster]

I can understand the excitement on switching light housings, idk why but I always see it as the eyes if the vehicle if their foggy they look old and depressed

[@chrisjalbert5437]

I have the same exact black f350 dually...love this build! I have a 1200hp trans build after breaking 8 times, I warn you now !,!.......rearend will be an issue and definitely go truetrac rear locker and you'll love it🤘🤘

[@imnota]

So nice that the noise is gone, because since the first start I thought it really messed the whole point of the swap which is getting a nice comfortable quiet truck with a nice powerful and reliable engine.

[@dandable]

Freaking rad! Your videos on this truck build are my most anticipated. Keep them coming

[@L3_Media_Group]

Taylor, check your seat. My first truck had a squeaky seat at highway speeds. No one ever rode in the passenger seat so I never could find what the noise was until I put some weight in the seat one day. With the weight, the noise stopped and pointed me in the right direction. I found that a bracket bolt needed less than a quarter turn and never heard that noise, again.

[@painedinks]

She looks so nice and cleaned up now! I'm so stoked and excited for you man, and I love these videos. These videos are always good for me to watch, enjoy, and live vicariously through you at the end of my day. Thats really cool man!

[@STREETCARCULTURE]

Taylor, you seem like a humbled chilled dude. Keep the content coming my man

[@Cheesyyy69]

This is by far my favorite series!!!

[@ethanhughes3220]

Ford looks great with the new lights!! 👍👍

[@lastv8270]

Taylor Ray you the Man you've made every part of this build interesting

[@bigrockauto]

Great Job - Love when a plan comes together. Great video!! Thanks

[@tankfan08]

Our Cummins swap took some tinkering when we got it done. We had a 4.10 axle ratio and it made the truck seem like it was working a little hard unloaded. We also had an issue with the converter locking but it is an Allison trans.

[@JuanMartinez-zw4tn]

It would look cool if you 3D printed an I 6 and Cummins for the fan shroud to replace the power stroke v8 turbo diesel. Also impressive what a huge difference the front bumper makes on this fords. I really dig the headlights (think a black housing would look better tho).. But have my doubts about the taillights

[@markrounds6302]

You're so excited for cold AC. It's like you live in Florida or something. :P

[@icyphilippe]

a ford with a cummins engine and chevy looking lights... make evryone mad 😂

[@dieselman8v923]

Ford used cummins before in their HD trucks and used to own part of cummins so really not of the ordinary other than the gay chevy tail lights.

[@NotaThunderbird69]

Headlights look like a 17 f250 lol

[@rydazim]

That's awesome dude! Now to get that interior cleaned and the windshield fixed.

[@MiGujack3]

Detail and interior super clean!!

[@matthealey1346]

To wire up to the aux switchs there are a couple wires coming through the firewall harness that are capped off about 8 inchs out. Just look for some wires taped up on the harness.

[@1012Mrjesse]

Earlier model fords, withe the 7.3, had the reverse on the bottom as well. They switched to your factory style for that body style I believe

[@SuperTMAN15]

Cummins are known for having a insane amount of low end torque and tend to fade away at the higher rpm range. That will change once you get a good tune in it. Awesome to see this beast up and rolling

[@logandoherty8707]

I love seeing taylor so happy

[@TheDailyRacer]

Man this is HYPE! Even just watching, knowing the incredible amount of work it's taken for you to get there, it's surreal to see the thing driving. Outstanding work. Can't wait to see it haul something! And also, I love little details like head lights and tail lights. Brings the look of finished projects together.

[@Beaver1237]

not sure if you get a lot of fog in your area but if you do, i'd suggest getting some amber covers for your LED cubes. really helps cut through fog

[@robertreese8044]

Love the truck brother, can't wait to see the the wheels on it.. Headlights and wheels make a big difference on any truck.. Keep it up bro

[@jameslastname9171]

You are having an incredible week of content! 👍👍👍

[@Metalmaxm]

Sandy the inspector! Always there when new stuff arrives :D

[@timmaahhhh]

Unknown if this has been suggested Taylor. Download Forscan software, and buy the appropriate OBD2 cable!!! Save yourself the headache and a ton of money. Buy replacement key blanks online, and you will be able to reprogram the system and spend way less. I do not know what all you can adjust on your year truck, but I was able to program Pats, Change tire calibration, and multiple other things for my 99 Ranger when I did a v8 swap. Forscan community is AWESOME Oooh, I need to get those headlights for my 08 front end swap.