A2338 M1 MacBook Pro doesn't turn on after liquid damage. Can it be fixed?

[@MangoPickle]

Thanks for fixing my liquid damaged M1 MacBook Air with a coffee spill. You guys rock! Resurrected my laptop for less and its working like new. Apple and a local PC repair place said it was unfixable. Keep up the good work. Whole repair was done within 1 week of receiving the laptop.

[@hardkore360]

@7:19, I wouldn't call it sleep mode, in sleep mode it would go into a lower power/voltage state and would be a constant signal. I've seen other datasheets for similar chips and they call it "hiccup" mode, where the chip cycles on and of, very similar to a PWM output signal but with no steady clock signal driving it. This tells you something in the comparator circuit or enable circuit isn't quite right.

[@danielm6507]

My A2338 turns on and works but does not charge. It is stuck at 5v with no visible burnt or corroded components. PBBUS_AON: 12V PP5V_S2: 5.3V PP3v8_AON: 3.8V (at L5800, L5820, or L5840) PP3v3_S2: 3.3V at LC710 PP5v_S2: 5V at LC320 PPDCIN_AON_CHGR_R: 5V (at C5205,5204,5203,5202,5201,5206) with both ports) PP3V3_UPC1_LDO (Near CD3217 chips): 3.4V PP3V3_UPC1_Core (Near CD3217 chips): 3.4V PPVBUS_USBC: 5V (if connected to the corresponding port. Only shows 5V per side if connected, other side will show 0v) Any other tips or pointers to check? Thank you so much

[@SERVICIOTECNICOTUSSCARCASAS]

Hello, can you help me repair my macbook pro m1? does not turn on for short

[@duartefilipepereiraneves6933]

another good thing about acetone is that it burns really well. Much more energetic than Isopropanol

[@sameerfinds9111]

I have one A2338 which came in no power and had corrosion near one of the CD32s, I replaced with all resistors and replaced that particular CD32. After that it would simply show 20v and then after sometime 5v so I was able to put the device in DFU mode and restored the device to which it fails and now I can hear the Mac Chime and shows Exclamation Mark. There is no other damage and all voltages are present.

[@TCRSCircuit]

Question mark you mean? Restore will erase the SSD. You need to install MacOs now.

[@danandrei96]

G3H comes from G3 - Mechanical Off. It's a PC power state same as S5, S4, S3 and S0. It pretty much means that the rail is on when the computer is fully off, so more or less the same meaning as AON

[@TCRSCircuit]

Yes, fully aware.

[@ArunShankartheRealOne]

Louis brought me here, I wish you all the Best!

[@deckydluffy]

Bro this macbook a2338 ic u5000 can be replacement? Thanks

[@TonyToneFixMyPhone]

I work all day long 12 hours and then I watch Tim work.

[@wurm6635]

Louis sent me, I'm happy to support someone with drive! Keep it up bro!!

[@mirrax1181]

Hey, saw you mentioned by Luis Rossmann in his video and decided to sub to your channel as well. Keep up good work!

[@TonyToneFixMyPhone]

Hell ya, Tim can fix anything !!! Newer board videos !!! Alright !!!! ROUND OF APPAULUSE !!

[@marciarecalde4069]

Hello help, I changed the keyboard of the mac and now I turn it on and the fan sounds loud and fast I turn it off and the fan does not turn off maybe help has happened to you?

[@anonymousrenner5570]

i have a mac book water damage 2020 i believe similar to this situation how do i get this to you ?and what did this repair cost this customer so i can get an idea of price

[@Edge-71]

Hey Tim which size hakko tips you used in this vid ..top work as usual 👌

[@TonyToneFixMyPhone]

How come you always get the easy ones ! No fair !

[@dampealdany]

hi broo, can you help me to get the boardview for A2338 please

[@TCRSCircuit]

Google.

[@dampealdany]

@@TCRSCircuit is not free like others

[@coiaroutourtour7421]

Benim de benzer problemim var. Adresiniz neresidir. Size nasıl ulaşırım

[@samuelrenteria315]

How much does a service like that cost?

[@TCRSCircuit]

For this model, we charge $479 for board repair.

[@harmonicposting]

hey Tim, I recently purchased an m1 MBA and unfortunately earlier today I was extremely clumsy and spilled about half a cup of water onto the keyboard and I freaked out and almost immediately powered it off. I tried to put it into a tent shape and accidentally powered it back on but it didn’t do anything sketchy so I immediately turned it off again. Leaving it to dry for 48 hours now. Do you think I did the right thing and disaster was avoided? I don’t have any means to open the back to inspect or to remove the battery either unfortunately. Learning a lot from these videos though as I am trying to learn Hardware Engineering

[@TCRSCircuit]

Without the battery disconnected it’s hard to say. With electricity running though the board, everything you did will have minimal effects unfortunately despite what forums may say.

[@harmonicposting]

@@TCRSCircuit Thanks. I pray corrosion hasn’t set in horribly.

[@aseeskaur7077]

Hi! Need your opinion on a unfortunate problem I am facing. I have MacBook Pro 2020 and it has got liquid damage and the motherboard has failed and now things working. I just want to recover my data from the hard drive. I would be grateful if you could let me know if I could recover my data from the dead MacBook Pro?

[@TCRSCircuit]

Hello, Your machine will likely need to have the logic board repaired to recover the data. If you are within the United States we can help you at www.tcrscircuit.repair

[@leoarjuncrasto]

Hey bro, would you recommend m1 macs or are you seeing too many poor engineering problems and board failures?

[@TCRSCircuit]

So far the M1's are decent, Better designed boards than the previous for sure, however the warranty hasn't expired on a lot of them so it's still too early to tell.

[@leoarjuncrasto]

@@TCRSCircuit thanks for replying bro. Wonderful channel. ❤️ I have a 2014 macbook 15 inch. Dying GPU, low performance when connected to power and just laggy in general. I am Planning to pull the trigger on the M1 pro/ max after using my old computer for almost 8 years now. Hoping to still get around $400 as trade in as the display works fine and battery holds a charge. I hope I make a good decision. Praying hard to keep my money safe.

[@craigmountfield36]

How do they auto boot when lid is open

[@TCRSCircuit]

Hall effect sensor.

[@MrPnew1]

Mmmm, boardview. Great job Tim.

[@TCRSCircuit]

Yes.

[@erronousactions]

Great work Tim! =)

[@barrywest3758]

Awesome work👍

[@TonyToneFixMyPhone]

Team Aouyue.

[@coiaroutourtour7421]

Size nasıl ulaşabilirim adres mail telefon