Team Associated B7 Build - Bag 6

Team Associated B7 Build - Bag 6. I checked the gearbox to make sure it spins freely after I install each screw in it. back off a little just at a time until it moves freely if you need to. I added some Loctite on the M3x24mm screws since they go into aluminum. Hopefully this will keep the D-block from coming loose. Everything moves nice and free. No issues to report.
Please buy from your local hobby shop or consider supporting mine!
Check out Houston RC at houstonrc.net/
They do have an online shop, but if they don't have what you need, you can message them here to order [e-mail]
Kit, Upgrades, and Electronics I will use during the series.
Team Associated B7 Kit - www.amainhobbi...
Team Associated B6.4 Aluminum Bellcranks - amzn.to/3kkRRJk
Team Associated Kashima Shocks - amzn.to/3SiKFdW
Hobbywing XR10 Stock Spec ESC - amzn.to/42mWhBz
Hobbywing Xerun 17.5T Motor - www.amainhobbi...
Hobbywing Programming Box - amzn.to/3H0S9Ot
Servo Horn - amzn.to/3CSI83h
Yeah Racing Bullet Connectors -amzn.to/3CIoXcx
Good supplies to have for the build:
Tamiya Shock Vacuum - amzn.to/3YnRkoD
3D Printed Ball Cup Tool - www.thingivers...
ProtekRC O-ring Grease - amzn.to/3sO4EVO
ProtekRC gearbox grease - www.amainhobbi...
snips, diagonal cutters - amzn.to/3CcuN4V
x-acto blades - amzn.to/3Ni7ZWe
Blue Loctite - amzn.to/3KsZh6l
Digital Scale - amzn.to/3yxMGu6
Bearing Oil - amzn.to/3cV2VJI
MIP Driver Set - amzn.to/3FhjpFP
MIP Speed Tip Driver Set - amzn.to/3wZOIlV
Calipers - amzn.to/3ntNkT9
Shock Pliers - amzn.to/3yye9vX
Lexan Scissors - amzn.to/3WfByuQ
Electric Screwdriver - amzn.to/3ACqpew
*Notice: Some descriptions may contain affiliate links, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the channel and allows us to continue to produce content.

[@rudiperez5315]

Do you have to take the whole gearbox assembly out to replace the hinge pins ?