Team Associated B7 Build - Bag 7

Team Associated B7 Build - Bag 7. Do not tighten the M3x6mm set screws until the end. It will prevent the hinge pins from going through during installation. Do not overtighten the M3 locknut on the hinge pin. It can compress the control arm and prevent the hub from moving freely. No issues to report.
Please buy from your local hobby shop or consider supporting mine!
Check out Houston RC at houstonrc.net/
They do have an online shop, but if they don't have what you need, you can message them here to order [e-mail]
Kit, Upgrades, and Electronics I will use during the series.
Team Associated B7 Kit - www.amainhobbi...
Team Associated B6.4 Aluminum Bellcranks - amzn.to/3kkRRJk
Team Associated Kashima Shocks - amzn.to/3SiKFdW
Hobbywing XR10 Stock Spec ESC - amzn.to/42mWhBz
Hobbywing Xerun 17.5T Motor - www.amainhobbi...
Hobbywing Programming Box - amzn.to/3H0S9Ot
Servo Horn - amzn.to/3CSI83h
Yeah Racing Bullet Connectors -amzn.to/3CIoXcx
Good supplies to have for the build:
Tamiya Shock Vacuum - amzn.to/3YnRkoD
3D Printed Ball Cup Tool - www.thingivers...
ProtekRC O-ring Grease - amzn.to/3sO4EVO
ProtekRC gearbox grease - www.amainhobbi...
snips, diagonal cutters - amzn.to/3CcuN4V
x-acto blades - amzn.to/3Ni7ZWe
Blue Loctite - amzn.to/3KsZh6l
Digital Scale - amzn.to/3yxMGu6
Bearing Oil - amzn.to/3cV2VJI
MIP Driver Set - amzn.to/3FhjpFP
MIP Speed Tip Driver Set - amzn.to/3wZOIlV
Calipers - amzn.to/3ntNkT9
Shock Pliers - amzn.to/3yye9vX
Lexan Scissors - amzn.to/3WfByuQ
Electric Screwdriver - amzn.to/3ACqpew
*Notice: Some descriptions may contain affiliate links, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the channel and allows us to continue to produce content.