Team Losi Mini-B PRO build. ALL the HOP-UPS!

Mini-B Pro build. I bought all the hop ups, I think I got them all...

[@donald2818]

One might ask why so many parts had to be changed after paying for the "pro build".

[@The4x4ramfan]

Any idea when you’re gonna post a track video with this setup?

[@AdamLeeRC]

Honestly I haven't been to my local buggy track in a while. I've been busy racing 1/5 and 1/8th scale. Sorry. I'll try and get back into buggy soon...

[@The4x4ramfan]

@@AdamLeeRC no worries keep doing what you’re doing and enjoy the hobby! Me and my brother just got into the Mini B’s recently, just wanting to see different setups and seeing them in action you know

[@rcjoe406]

Sooo about $850 and I'm good lol great looking buggy brother

[@blizzyblz7832]

Got mine the aluminum steering rod that it comes with didn’t fit on the spektrum servo it comes with and the servo ended up breaking when I tried to put the steering rod on with a little bit of force not well built on that part at all other than that everything else is good only ran me back about $20

[@AdamLeeRC]

Yes. Mine did not fit the recommended servo either. I'm going to email Horizon Hobby pics. That's also why I'm running the plastic servo horn that came with my Savox servo.

[@blizzyblz7832]

@@AdamLeeRC Seems like the newer ones that they are producing are not fitting properly I have also contacted product support

[@GranthamBoysFilm]

Same happened to me. I chatted with Horizon support and they sent out a new servo immediately that fit perfect and works like a champ now.

[@lauriepearsey4607]

Nice

[@AdamLeeRC]

I didn't get the Ball Diff cause I intend to run it on carpet. I did not see an aftermarket gear diff.

[@Rch_P]

Would the ball diff affect the vehicle negatively on carpet?

[@AdamLeeRC]

@@Rch_P All carpet buggies use gear diffs. Ball diff would provide too much bite on the load tire and can cause traction roll. And trying to adjust a ball diff to work on high traction surface would either be loose enough on the turns, but too loose on the straight and may slip. IMO I can be wrong.

[@Rch_P]

@@AdamLeeRC Thanks for the reply 👍🏻 Trying to start racing & I like to pick everybody’s brain when I can.

[@roberttruesdell6151]

is the spline on the savox the same as the Spektrum

[@jasondunn6223]

Do you have a video painting the body?

[@AdamLeeRC]

no sorry

[@zacbrewser]

Running video??

[@AdamLeeRC]

Honestly I haven't been to my local buggy track in a while. I've been busy racing 1/5 and 1/8th scale. Sorry. I'll try and get back into buggy soon...

[@jacobriver198]

Part number for the slipper?

[@AdamLeeRC]

MIP20080 on amainhobbies.com

[@hanau73]

Post up the hop up part numbers if you could.

[@AdamLeeRC]

www.horizonhobby.com/search?q=%22LOS01025OptionalParts%22&srule=best-matches&sz=24 You can find all the parts here

[@yand3151]

Where did you get the servo horn for the 21t savox pls

[@AdamLeeRC]

I used one for a Micro Airplane

[@yand3151]

@@AdamLeeRC any links?

[@blizzyblz7832]

What savox servo is that?

[@AdamLeeRC]

SH-0253

[@floridabudgetbuilds4157]

Nice

[@shrillyy1604]

Running video?

[@AdamLeeRC]

Sorry I haven't had time to get to my carpet track. I've been busy racing onroad. Hopefully soon.