Tearing a brand new chainsaw apart

[@The_Garmin_Guru]

Would love to see a video on how you draw up an estimate on a job. Don’t have to show money just think it would be interesting if possible.

[@workinonitsteve]

That’s a nice saw, seems really fast. I’m looking for something in between my 291 and my old 064. This might be it.

[@cotontop3]

I've had it almost 2 years now and it still gets run almost everyday

[@workinonitsteve]

@@cotontop3 good to hear, I used to watch you all the time but haven’t seen one of your videos in a while. Started my own channel recently and I just ran across this video for some reason. New sub again. Keep it up 👍

[@stiantnnessen2671]

​@@cotontop3 hai tim im considering a Stihl ms 500i or a 462cm wath wood you prefer!?

[@barronkistler1196]

I absolutely love my ms400, been running a 20 inch bar. Completely stock yet. My ms 661 stock air filter was horrible. Max flo fixed that. Even though I'm starting out with the firewood gig I'm so happy with both saws.

[@DanKlein_1]

LOL. Holy cow! Didn't expect that. I don't know if I have ever seen a saw chew through wood that quick before.

[@SaltyMike396]

Seems like a good running saw. I have the 261, 462, and 661. That pretty much covers everything for me.

[@bhermon265]

Hey Tim thanks for some good information on the 400 and the demo how to calibrate the saw I haven’t seen that before 👍👍

[@johnwhicks8687]

Awesome video. That really woke that saw up

[@williamjordan5414]

Very cool. Seems like a good size all in one saw if a person was looking for one that he/she could fell, buck and/or trim with.

[@ParadiseLandscapingGA]

That was cool stuff. That bad girl woke up.

[@peckprice]

Our Stihl dealer has been talking about the 400 all spring. Looked at one last week. Weird thing was that the 400 was the only new saw in the store. They are having trouble getting new stock. Great video, appreciate the content.

[@russbyrd3221]

Love the knowledge buddy!

[@dolphuscason9383]

I wish you were in Texas,I'd have you do some tree and dirt work!

[@clintblackwell8873]

How about a MS400C vs. 562XP vs. MS362 video?

[@joshsweet5373]

Your an honest man sir...good review I just got the ms391for half that price and its 64 cc

[@thirdstreettito]

Stoekel stacks/redbeard saws who makes the foam filters has a vide on installing it in the 362 on his KZbin channel.

[@patkelly7999]

Good job Tim, well wear:):)

[@RobinRK1962]

So powerful it made the world shake

[@scottfredenburg924]

That saw is a beast

[@austinbond1348]

That dog’ll hunt!

[@georgefrench6487]

it'd be great to see a before & after test of each of the upgrades

[@davidketterman961]

That was way cool...

[@Firebird_876]

I’m not a Stihl man but those you’re running with the bark boxes sure to sound good

[@anthonymcclelland9315]

More logging stuff inthe woods please

[@1962guy50]

That 400 is smoking! Looks like you've mastered the Stihl chains. Can't wait to find out about the new fuel. SUNOCO Optima?

[@joshuafowlkes500]

Have you hopped up the 362? I have a 362 and have been looking for things to make it perform better.

[@mattphillips4260]

got some family that use wood to heat their home and water in the winter here and would love to go to school with you or the person that sharpens your chains dang they cut good

[@TheUncommonKIBBLES]

I would like to learn as well.

[@cotontop3]

@uncommonKIBBLES and @Matt Phillips here it is step by step of how I do it kzbin.info/www/bejne/eaXLZn6Gbdyhh9U

[@Sensei948]

@@cotontop3 oil mix ?

[@lukeruggiero1894]

@@Sensei948 use motul 800 offroad 2t the best there is

[@Sensei948]

@@lukeruggiero1894 33:1 ?

[@NCCountryBoy]

If a man didn't know anybetter he might think your shade of orange might be changing. That saw sounds like one of those competition Hot Saws. Screaming demon

[@plow9133]

10 years ago I gave 400 for my Stihl, 310, only thing i done to it is buy a few chains here and there, but this year I bought the very first air filter , I'm sure it was will over do, but always ran good with a 20 inch bar since i bought it 10 years ago, on cold start 3 pulls tell you hear the pop and then half choke let it ran wid3 open fro about 4 or 5 sec and hit the throttle and pull down and it will idle all day, other then that done nothing to it, i cut about 5 or 6 cords a year for my self and I sure thats nothing but its 10 years old and never been in the shop

[@dariantakieh1398]

Omg that thing can cut. Looks like it’s a bit too powerful for you mate!

[@bigpoppasjunk333]

I thought you were a Husky guy. What's up with the Stihl's???

[@alanwatts9232]

Do you have any further improvements for the 500i filter beyond the pool noodle piece?

[@davebumgardner6309]

Where did filter come from, thinking I might get same setup for my 462

[@SCBullterriers]

That's a cutting SOB

[@billcramer9047]

Hum my 440 must be a dog it will barely pull a 25 inch bar.

[@catman980h]

There is a hell of a lot more going on with that 400 than it is with my 051 and 460’s…….

[@jurpikag]

Your new videos have not came up on my homepage and I missed a few. Did you jump teams?

[@jarredmcgallagher2592]

What happen to the Husqvarna saws?

[@nathanbrodeur]

Tim what about the MS 391 being at 64.1 cc I have a 25 inch bar for mine and it runs a full chisel 33rs chain no problem it is cheaper than the MS 400C the MS 391 with a 25 inch bar is $677.17 USD before tax probably a little bit lighter than the MS 400C

[@mr.fridggyyy5826]

391 is a farm and ranch saw if I remember correctly. So that doesn't appeal to Profesional users as much as the Pro Line of saws. My freind has a 391, and it does the job for what he does.

[@lukeruggiero1894]

Hate to tell you but 391 isnt that good of a saw. 400 is a lot lighter and a lot more powerful.

[@xenadobie1538]

Do you think they will ever fix the fuel cap problems so they won't leak?

[@cotontop3]

In their minds, there is not a problem with their fuel caps.

[@sheepdog271]

They haven't had one pop off and dump fuel/oil down their legs.

[@Davee94]

Any issues oiling with the 400c and 25" bar?

[@gunterbecker8528]

It's a year now and he still hasn't given u an answer, disappointing !!!

[@Davee94]

@@gunterbecker8528 lol im not too worried about it, ive had a 400 for over a year now running a 25 and 28 inch bar oiling decent enough.

[@gunterbecker8528]

Thanks for replying, I'm in the process of buying a saw ,tossing up between 362 or a 400 ,hence my oiling worries! Just cutting a trailer load at a time I believe a 362 would be sufficient! Its just sometimes u see a "big" log a 4 to 6 foot stump were I'm thinking a 362 might struggle a bit ??? What's u opinion, kindly advise, I thank you in advance 😊 Gunter

[@Davee94]

@@gunterbecker8528 I would go with the 400c its a great little saw power to weight wise! just crank your oiler wide open and you will be fine

[@gregking7616]

I thought you were a Husqvarna person

[@yvonnejohnson1557]

What octane gas you run in your Sol's

[@cotontop3]

It’s Husqvarna premix fuel and its 95 octane

[@brentmedders]

That Magnesium piston must really be the pricey upgrade in that saw. She sure hums none the less.

[@bubbarickard]

what is bark and what does it do

[@davidbulich1254]

Loud unrestricted exhaust

[@GozonTheGonsarian]

ho-lee-fuk-likee-likee

[@andyd9199]

Is the 400 available in the states or did you get a promotion from stihl

[@cotontop3]

Their at dealers now if the dealer will carry it. Lots of dealers aren’t going to carry it and they’re stupid for not.

[@cameroncarter2207]

Are you gonna get 462 you might have said and I missed it don't kmow

[@cotontop3]

No, I am not going to get a 462

[@lukeruggiero1894]

@@cotontop3 why's that?