Tearing down the CB919! (Beginner Bike Build Series - Ep. 3)

Get your Motorcycle gear @ shop.yammienoo... $1 = 1 Entry to win our giveaway bikes
Join @ yammienoob.co for access to our Discord server and automatic entry to win our bikes
Our best videos: bit.ly/Best-Vi...
Our Best Selling Street Glove: bit.ly/valenci...
------------------------------------------------------------
Best Beginner *Sport* Gear:
Helmet: bit.ly/SS900-H...
Jacket: bit.ly/SS-Savage
Gloves: bit.ly/4SR-Mon...
Boots: bit.ly/Coastal-...
Best Beginner *Dual Sport/ADV* Gear:
Helmet: bit.ly/SS2600-...
Jacket: bit.ly/Hammer-...
Gloves: bit.ly/Firstge...
Boots: bit.ly/AR1-Rac...
Best Beginner *Retro/Classic* Gear:
Helmet: bit.ly/Arai-Re...
Jacket: bit.ly/Armored...
Gloves: bit.ly/4SR-Mon...
Boots: bit.ly/CTA-Lea...
---------------------------------------------------------------
FAQ:
What should my first bike be? A Turbo Hayabusa.
Very funny, no seriously. What should I get? A TURBO BUSA.
What is this channel? The premiere source of motorcycle edutainment (educational + entertainment) on KZbin. We take on everything from the best bikes you should buy all the way to praying to our lord and savior Rossi.
Why should I subscribe? Because you want the highest quality motorcycling videos on KZbin delivered to your feed every single day (seriously, we do daily uploads)
Why do you guys make these list videos? Like any good capitalist, we supply the demand the market has.
Music: amplelife.band...
NOTICE: Elements utilized from other videos are fair use and fall under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse KZbin’s copyright claim tool.

[@the8jrfan]

Could you work on the bike in a two piece bikini next time Yammy? Thanks pal.

[@nanithefuck]

+1

[@romankolesnikov144]

+1

[@cameronrobertson1119]

Nothing is more sexy than a man cleaning his bike

[@DJNomad777]

Pony up ,hell I would if people chipped in and got me a bell blast .

[@JohnGhani]

conversion to the legendary 919 mobility scooter has begun

[@tylorwashere8434]

Fake. I didn't see him sit in a chair staring at it and cussing it out once.

[@JMcGuire-su4cc]

Yeah... Def fake news

[@Geoffthesuperinspector]

You know we ya thicc bois, also love the new intro

[@scudberries2126]

my thruxton 900 EFI has one of those "choke" things on it as well, triumph calls it a 'fast idle' which you can use to warm the bike up quickly in cooler weather. Its actually been handy

[@UnleashedSoldier]

Best thing to use for metal stuff like the bottom of the forks is a brush and some WD-40, works like magic pulling crap out of the metal. Just make sure you de-grease it afterwards to keep dirt away

[@stoyanshopov6847]

guys i've just watched this video while being high and it was amazing totaly recommend.

[@gabesantos9510]

Stoyan Shopov same

[@stoyanshopov6847]

@@gabesantos9510 realy?!???? xD

[@natesobeck8137]

Stoyan Shopov I wish I could smoke and watch this I totally would, unfortunately I’m on probation

[@strellettes8511]

Dude I fucking love your combination of memes and motorcycles on this channel, keep it up.

[@Mish93Will]

12:34 Yammie dropping those tech house bangers 👌

[@bhargavsharma9241]

Yayyyy. New video from Papa Yam!!!

[@ghostreap]

Why does your background garage music sound like I just walked into a club in GTA

[@Vertignasse82]

Hey man I just wanna say that I'm glad that you are back and I'm really happy that your channel is growing. Well deserved.

[@pablopicaso8374]

Protip here yam from a REEL mechanic. Disposable gloves > rubber coated cloth gloves trust me its way better

[@twoscoops5197]

If you're ever stuck with a screw like that, you can cut a slot across the middle of it and unscrew it with a flathead screwdriver. A dremel makes it easy peasy yammie squeezy.

[@benjaminreid1904]

to get off trouble screws use a dremel and cut a slit and then remove with a flat head screw driver. I am a new patron by the way

[@TheYamR6Sp]

Glad to see you wash the bike the proper way, just a gardenhose and not with a presurecleaner.

[@theman9559]

You could cut a stripe in the throttle thingy screw and use a flat screwdriver.

[@deathwish8339]

That's a great suggestion, but I belive the screw was buried in a plastic sleeve.

[@sophisticrat4153]

The Man you’re a genius!

[@torqueaddict8226]

Only partly, using a die grinder, you’d slot that easy

[@theman9559]

@@sophisticrat4153 *frowns and blushes* Thank you!

[@gncbyron]

Man just ask Moonfleet41 that guy is a genius:)

[@jtmnavy]

very nice permy tube , very nice

[@TheOriginalArcticEd]

I probably don't need to say this, but I will anyways... I certainly hope there aren't any stupid LED under-lights, tacky powder coated "contrasting" colored brackets and / or J.C. Whitney quality accessories or begged mega dollar rear sets, etc like some of your contemporaries (Most notably Cheese on Two Weiners and Motonausia) LOVE to heap on their "builds"... Keep it clean and classy, Noob!

[@TheOriginalArcticEd]

Wrong turn there... Next thing you know, the calipers will get painted red... Oops... Never mind.

[@rem362]

Best series you can think of

[@MrCheaterpipe]

Drill the head off of the stripped screw and separate the 2 halves of the switch panel once separated there will be a large enough portion of the broken screw exposed to grab with a set of vice grips and turn out

[@Toasty553]

Live this series sorry that I’m not a patriot but I love the series and your Chanel’s and can’t wait to see where the bike goes

[@nightlyghost]

Well with the cct it looks like you don’t even need to take off the tank and fir the coolant change there usually a bolt drain plug on the water pump and since it pressurized you’ll need to open the radiator cap to release the pressure from it then to get all the coolant out you’ll need to fill with distill water and run it to operating temperature and then drain it and keep repeating till it’s just clear but other then that you did better than chace so good job 😄

[@whitelightning3330]

U have inspired me to rebuild my yamaha v star 650. I bought it this June and laid it down in July and was just gonna get rid of it but because of this build I'm gonna rebuild my bike and turn it into a bobber

[@jonharper7312]

YOUNG HUSTLA i ride a V-Star 650 and I’ve ALSO laid her down but I just slightly dented the tank The tank is custom painted with black translucent flames and cherry red So yeah I’m not replacing the tan

[@Sylencer1982]

Still watching the vid. 10-min mark. So I apologize if it's too late for this. But. Electrical work. What helps significantly: 1.) Strip both wires. 2.) Tin both wires. (get some solder covering 'em.) 3.) PUT THE HEAT SHRINK ON. Once it's soldered, it's usually not possible to do this, unless you take it apart. 4.) An often-overlooked step: Make a *mechanical* connection between the wires. Turn 'em into hooks, put 'em together, then smoosh 'em together a little. Make 'em be able to hold together without solder. And *then* 5.) Add a little more solder, to finish the connection, before 6.) sliding the heat shrink into place, and snugging it down. That mechanical connection between the wires really helps strengthen the joint, and prevents it from cracking apart later through vibration and such. There are methods other than the two-hooks technique, but that's the one I'm familiar with from Navy electrical work.

[@natesobeck8137]

Love the build series yam, I do all of my motorcycle maintenance myself and I enjoy watching videos of people fixing their bikes up themselves keep it up

[@joshuag6821]

Love this build already

[@Mike_and_Life]

Who knew Tammy's Lube knew how to work on bikes? Well done. I was never a subscriber before, I am now. And you're the only KZbin bike builder whose head is aerodynamically designed for speed! (That I know of)

[@jagovanbeek]

Hey, my throttle did that too! I just call that cruise control ;)

[@PapaMGTOW]

11:58 Impact Driver Brother! Great Build You are Awesome!

[@zondy008]

this easy really educational for people who have no idea about bikes. definitively enjoyed it and cant wait to see the end result

[@HockeyVictory66]

It’s not a choke. A choke changes the fuel air ration in a carburetor. That thingy on and EFI engine is an idle adjustment to help the bike warm up faster.

[@NudaMan]

He always looks like he is trying not to laugh when talking into the camera 😂

[@Kaminoextragalactic]

Add Clip-ons instead of putting the bar back, it makes bikes looks sooooo much better. Make a custom finish on the tank preferably Mat black or just put a leather tank cover on there in white. Put a custom single leather seat on there and cut off the tail of the bike (half of the frame holding the seat). Add white rubber tire circles on both sides of the tires. Just some suggestions from a Hornet owner over here!

[@AnthonyP2A]

EDM in the background? NOICE! :)

[@patw9175]

New intro is [fire emoji]

[@jordanmorrison9287]

14:13 craigslist post "honda cb919 never dropped needs tlc runs fine 1000 dollars and she's all yours with a pair of gloves thrown in there too"

[@dirtydsquared7495]

When I strip a bolt which I don't a lot because I don't use power drills on bikes.......I cut a slot across the bolt and use a flat screwdriver

[@twistedturtle6654]

That would be such a cool ass wasteland bike

[@jamesbashaw5831]

The "Choke" on a fuel injected engine is called a Fast Idle Circuit. I believe they used it as a cost saving measure on earlier EFI bikes. Now they just have the comouter do it. My '01 Aprilia RSV Mille R has one too. When I bought it I was a bit confused!

[@everyonelovesfriday2045]

CCT is right on the throttle side of the motor. Super easy to replace. I replaced mine in my xx1100 every 2k. Sounds like rattling, It’s more of annoyance than anything else

[@Kyle-ue5uj]

Victory v92 had a choke like lever on the handlebar of that efi bike, was technically more of a timing adjuster for cold starts but also worked as cruise control at about 75 mph

[@nealbot5000]

One trick that I use to extract stripped bolts like that, is to get a torx bit that aaaaaaalmost fits into the stripped out cavity. Then hammer it in there and then turn it with a 1/4 or 3/8 drive, whatever it may be.

[@bladenmist9573]

I hope you can make that bike look hot, i trust you yam.

[@murkrowkronos8074]

Ohhhhhhhhh boy.

[@xGxPhantomZzz]

Oh man you haven't seen my chains..on my old DTR125..oh god the chain, there is about 1/3 Inch of Gunk on it, I had to scrape it of with a flathead screwdriver! Couldn't even finish everything because there was so much!

[@alexboyde8129]

Fast Idle not choke! X11 came with a fast Idle as well remember... design of this bike goes back to early 2000's it was common for bikes to still have Carb's fuel injection was relatively rare twenty years ago

[@ruikazane5123]

I'm excited myself. Work on it correctly though. Miss a point and you'll set damage either immediately or later on.

[@manindernz]

Good to have you backk brotherr!!!

[@elchompo6114]

I'm 15 rn and from the UK so I can't get a bike over a 125 until I'm 19. I'm thinking at 17 get a KTM RC 125 and then at 19 I'm gonna get a Yamaha bolt and have some fun with that with mods n whatnot.

[@elchompo6114]

@@jediknight1294 will I have to do a scooter license before I can do my whatever the over 125 is

[@lukegrendahl469]

Just pledged to your Patreon can’t wait to see this build progress!

[@Real_MisterSir]

Ducati 749/999 also have a choke-like feature to help with cold starts despite being FI :)

[@junglejim8781]

As does my 2002 aprilia rsv mille and that's efi

[@DJNomad777]

Get that screw off with some vice grips and if that don't work dremel the head off then vice grip.Either way don't let that thing whip you .

[@xrated072]

Rc51 also has a choke. It's more of a fast idle for cold (weather) starts, if I'm not mistaken.

[@Kiwi-vk1lo]

For a stuck bolt try PB Blaster, LIGHT tapping to encourage liquid to get in seams, wait a little while and try again. If it doesn’t work, drill the head off and use vise grips to get the threaded part out once you’ve disassembled. Or use a reverse threaded tool extractor.

[@pumpiron1657]

Y u ain't married Cammie cube XD Edit : i low-key love that intro

[@hopper1]

Left hand drill bit would've made quick work of that screw. You'll get the next one though.

[@dirtydsquared7495]

Good bike choice ... now u need a 900rr and a turbo

[@kyleb5633]

A noob but somehow a legend

[@ramnamrico9399]

Do a motorcycle restoration series

[@gripsanity]

What about a liter bike makes it a beginner bike?

[@daveheffner3266]

#hentaiwrap

[@sleepysilversmith5339]

Most early FI bikes have enrichers. Look at the Hayabusa's, the TL-1000's, yes hornets, BMW K-bikes, you'll see them everywhere. They stopped appearing around 03 - 04.

[@devinblack20]

Love your videos, I was just wondering if you have or were thinking about taking an MSF course? You might have mentioned it before in another video, but thought I'd ask

[@travatron4000]

1st Gen "New Classic" Triumphs had a choke despite being EFI too. I was told once that it basically is a manual replacement for what would have to be a servo in the throttle bodies to facilitate cold starts. IDK if that's true or not.

[@MitchMAH]

you look like you have no idea what your doing. like, at all. that makes for some good entertainment! i wish you the best, but will also enjoy all the troubles along the way. can't wait for the next!

[@EEEBA1]

In that case you may enjoy chaseontwowheels :)

[@U.P_SCUBA]

Old video but screw stripped because it was jis head and a Philips was used on it. If you have a Japanese bike buy vessel brand on eBay and save your self.

[@mechanicalcanvas]

WD40, green scotch brite pad and elbow grease is a much more cost effective cleaner/polisher for the headers. Bar end is probably too tight on the throttle.

[@alexchambers8510]

Could have used an angle grinder to cut s score in the bolt, then used an impact driver or even a regular screw driver to remove it 👍

[@Surpriseify]

How is riding with your injuries Yam? Are you able to ride okay?

[@Bruh23732]

Yammie Noob Can’t wait to see you riding Yammie, it’s been too long man.

[@LF1988]

Say dirty one more time... :D

[@erics.3586]

That's a nice Z you got there

[@TheMcooper17]

hears discord, looks at own tray

[@soulshard6622]

I want a ridge wallet... but its soo darn expensive 🙁 at least for me

[@tazthedevil22]

If you buy one, you will be broke so you wont use it anymore. :-(

[@ducke295]

I'm in the same boat. It looks nice and it has some very very good reviews but I don't know that I can justify spending $100 on a wallet.

[@mgpyt]

Yo Yam, love that you're trying some different things, but the editing on this video was a little confusing at parts. You would cut to a shot while you were in the middle of saying something. Kinda annoying to follow along. Just some constructive criticism. Love the intro and reverse footage at the beginning though.

[@skulldriver1019]

The r1150 bikes from bmw have “chokes”. It’s just a high idle to keep the engine from stalling while cold though. Not sure about the 919 though.

[@nolantorrence7124]

This music is like the music from the spongebob episode when they thing me crabs is a robot

[@ChrisFetherston]

A hand impact driver will make quick work of that throttle screw.

[@saiprashanthannadanam7774]

Hey jammie pube.........😂. Just love the videos. 👍👍

[@WigglingWaffles]

You should do a photo of before and after each step

[@AlgebraCorner]

Flimsy tube on 2 wheels again!!

[@freezeman32]

Commentate over what you're actually doing! ya know just briefly say what you're doing, why, how, etc. This helps people who are new to motorcycles understand whats happening instead of just guessing what you're doing like changing fluids for example. Also can be more entertaining for those who know what you're doing while there are just clips thrown together without commentary or music. Keep up the series!

[@jered2177]

Only one I've seen was on my suzuki ltr 450 quadracer,they called it a fuel enricher lever.

[@EEEBA1]

The big question is who is going to put this bike back together after you take it apart? :)

[@sed8181]

You think that chain was dirty!! You should've seen my ninja 250s chain when I first got it. The chain was covered in thick black grease and grime. I cleaned it and it turned out the chain was silver. I'm still not sure how the chain ended up covered in goo like that because the chain was still really good underneath.

[@philip6027]

10:18 Fuel injected vehicles have a choke, but usually not physical it's just programmed into them.

[@Angelripperize]

I have a physical choke on me and I am fuel injected.

[@philip6027]

@@Angelripperize You're 14 years old.

[@Angelripperize]

@@philip6027 I'm still the fastest and best looking.

[@philip6027]

@@Angelripperize nay

[@mattgranger1221]

Legit i dont use anything but chemical guys when it comes to detailing

[@jonasjackert8843]

Hey, could you review the Bikes by MZA (East German Brand) like a Craigstlist Listing? As a german I think it would be very entertaining :D

[@matteo4282]

Wtf i came here to see a bike being worked on. Not logic giving me a speech

[@mackeycharli256]

It’s screaming for a set of clip ons

[@jamesandkendraholmes4608]

Dude..... shorts next time lol. Also your really jumped around. Keep up the good work YAM!

[@abde4645]

*LOVE YOUR VIDS KEEP U:P* ❤👍

[@gjg1281]

Hopefully that sam adams commercial will help by you a lift & some mechanical training courses haha

[@moel2753]

Music from episode please?

[@charliematthews9932]

Loving the series man! Only thing is did you warm the bike before u dropped the oil?

[@buckfiden6227]

Go Tribe

[@4ampaul]

That thing should have blue Honda coolant in it. Now quit being a Crammy Poon and get that throttle screw out

[@bristolratshooters996]

Is there a part 4?

[@onemanarmy1310]

my 1998 VFR800 has EFi but still a choke, only the 98's tho, 99-200 didnt have it.

[@sed8181]

This bike is rough. Cool but in rough shape.