Tech Talk- Using CP Series with a Subwoofer

[@ernieD]

Thanks, I needed that, ;>). Just ordered a second CP8. I plan to connect both to my EV powered sub.

[@RexyFan]

ernieD How’s the EV sub going ? I’m looking at buying a different branded sub due to budget to connect to my QSC 12 but hope it won’t make too much a mess ??

[@djs5663]

EV subs lack power & those ETX's are too heavy

[@DJBpartyTV]

@@RexyFan best budget sub for the price is the Alto TS 312. I've heard them in person and they definitely bang for a 12-in subwoofer.

[@RexyFan]

@@DJBpartyTV I’ll have to check them out Thanks

[@jessicaembers924]

Can i connect 4 CP12's up with 2 KS118's and run 2 CP8's as floor monitors? Cause i prefer the sound quality of the CP12's over the KS12.2's by a land slide. But i'd probably need to use 4 of them to keep up 2,000 watts with those big ass subwoofers and i Don't wanna use the little ones! :-)

[@adashtban1521]

what if we have only a single CP8 and a single Sub? how it works? just connecting the Combo XLR out to the Sub, and adjusting the contour to ex. sub, right?

[@QSCAudioProducts]

Yep, that is correct!

[@류대선-q4v]

감사합니다~ 잘보고가요~

[@Vanhalen1]

Do you use a mixer with this

[@gamedia3489]

You can use any input device that will go into the subwoofer on a 1/4 in or xlr cable; even a bluetooth device.

[@jayadevasarkar3431]

Hi! Newbie here in audio set up. I recently bought a pair of QSC CP12. I don't have a mixing console yet and I tried to use both speakers connecting through input C using my cell phone to play some songs. I used my 2nd unit cp12 as extension speaker. The manual says from MIX OUT (Post gain) of one speaker (serving as the main) connecting to input A of another speaker (extension), the gain level of which should be set to 0 db. And when the gains on the extension speaker are set on zero, the extension's output level is the same as the master's output level. Control both master and extension output using the master's Gain controls. I did this but there is no sound coming out from the extension speaker. I need to adjust the gain of the extension speaker for the sound to come out. And the thing is I have to set the gain of the extension speaker to 12 o clock while in the master/main speaker is set to 8 o clock only and it produces a bit of equal sound strength. Obviously, I have to set the gain of the extension speaker higher to match the main speaker contrary to what the manual says. Any thoughts on this? TIA.

[@richardv.582]

so as i understand Default sub, setting is when using Sub Woofs...

[@biasvids3987]

CP SUBWOOFER ?

[@yandeacak7400]

あなたの最初の誕生日プレゼントは何ですか？

[@kalebolson4512]

the video image is too poor, you need to fix it more

[@junhao735]

you need to clarify the content