4.6.5 Packet Tracer - Connect a Wired and Wireless LAN

[@danieljuanta7211]

My friend your really saving me from failing a course If I can see you in person I would hug the hell of you! your a hero men I hope you can keep making great videos.

[@TechAcad]

Any time!

[@brodjoe13]

I appreciate these videos so much. I watch them first then I go try and to them by myself and then reference these videos if I get stuck. I’m a visual learner and I’m class we don’t have instruction we just do the work ourselves and if we get stuck we ask the teacher. But being able to watch them first helps so much, you’re helping so many people out, thank you! 🙏

[@christiano8104]

4 years later still helping us with this, thank you!

[@TechAcad]

Great to hear!

[@KeeK7891]

You're a hero. I didn't skip the ads because you deserve all the revenue!

[@TechAcad]

Thank you so much for your great support and sharing my dear friend! Its really motivate us!

[@AdelLevi]

Thank you so much, if it weren't for you I'd be stuck for hours!

[@TechAcad]

Glad I could help!

[@jaredringor9552]

This saved me from failing my college class, Thanks man!

[@TechAcad]

Glad it helped!

[@retroiglu]

Seems that the fiber orange cable has been updated. Now it's only one single cable but still has a dual connector or port(in the Secondary Network).

[@Fight77965]

Bro u saved me 🙏 I was gonna fail everything if u didn’t make these videos

[@TechAcad]

Glad I could help

[@ndumisohlengwa3554]

I final find my teacher for Cisco thanks sir, I promise I will share your channel as much as I can.

[@TechAcad]

Glad it helped! And thanks for your great support and sharing!

[@maryamalali-s6t]

Thank you so much, i appreciate your efforts even though it has been 4 years this is helping me understand more than the professor thank you very much, may god bless you !

[@TechAcad]

Great to hear!

[@unfortunateevents8944]

hello do you have the answers for part 5?

[@DonJulioReacts]

Saved my life. THANK YOU SO MUCH AND GOD BLESS YOU🙏🙏🙏🙏🙏

[@TechAcad]

Glad it helped! And thank you so much for your great support and sharing!

[@dozhin9369]

Bro is the GOAT thank you so much for making first college semester so much easier

[@TechAcad]

Happy to help

[@HarpreetKaur-wt1kl]

Thanks So much ☺, lots of Love for you, You are making me understand everything better than my professor👍. Thanks for uploading your helpful videos☺🤗

[@TechAcad]

Glad to hear that

[@Italiaiskawaii]

thank you tech acad for your hard work, subscribed! 🙂

[@TechAcad]

Thanks for the sub!

[@Robin_St]

Marshalla du Ehrenmann, helps me at my exams a lot

[@TechAcad]

Glad it helped!

[@jessicaclarke5132]

Sir good night you have no idea HOW MUCH I APPRECIATE YOU AND YOUR VIDEOS!!! Your videos be saving me 🙏🙏 is Appreciate you

[@TechAcad]

You are very welcome

[@TreakTrove]

Great tutorial . It's helping us a lot.

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@sahildixit432]

Why didn't you explain the connections between devices in detail from basic ?????

[@henrytate9681]

Thanks Heaps Bro! 👊

[@TechAcad]

Any time!

[@aeronnepomuceno6305]

Thanks man. You're such a big help!

[@TechAcad]

Glad to hear it!

[@emilyaday4960]

you are the best teacher

[@TechAcad]

Glad it helped!

[@matthewrivera638]

Thanks man. This helps tremendously!

[@TechAcad]

Glad to hear it And thanks for your great support and sharing my dear Friend...

[@themage1016]

thanks indian guy you really are my only hope

[@williesolomon614]

Impressive lab video tutorial. I've learned a lot by watching your video lab. Thanks for sharing.

[@TechAcad]

Glad it was helpful!

[@mariyanmitev3199]

Thanks a lot! Great tutorial! I had a problem with one cable and you helped me to find the right way!

[@TechAcad]

Glad it helped!

[@hejkurdi3052]

Very helpful video. Thank you!

[@TechAcad]

Glad it was helpful! And thank you so much for your great support and sharing our channel with your friends...!!

[@joshgagne4357]

you are my hero

[@TechAcad]

Glad it helped

[@omarsaleh8605]

YOUR AMAZINGLY AWESOME AND THANKS FOR THE HELP😁😁💙

[@TechAcad]

Happy to help!

[@motirealestate]

I wish I can give you a hug you are the best!!!!

[@TechAcad]

Glad you like it!

[@dheerajgudipati9375]

Thank you so much for your help!

[@TechAcad]

Glad it was helpful! And thank you so much for your great support!

[@ryldoo6861]

once again you save me! keep up the good work :)

[@TechAcad]

Glad to hear that!

[@avanox3100]

Thanks for helping a little bit with that

[@edgarmaravilla5403]

Thank you very much for the help

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@ganni025]

thank you so much guys,,,,great work

[@TechAcad]

Thanks for watching!

[@rocketbeater6994]

For real, thank you so much.

[@TechAcad]

Glad it helped And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team.

[@monicamacabanti7621]

Thankyou, Sir! 😇

[@TechAcad]

So nice of you

[@msfklfl123]

the picture of the rack of the pimary network looks different on mine for some reason

[@pochi1x]

youre the best bro i love you

[@abinantony1295]

very usefu video... keep going on

[@TechAcad]

Glad you liked it

[@MuhammadAzema-h4j]

what is the type of the router used beacuse i cant find the s0/0/0

[@TechAcad]

You may need to add the modules from the physical tab!

[@juangarciaortiz4305]

Thank you for your help.

[@TechAcad]

Glad it helped

[@babak6000]

Thanks so much 🙏🙏

[@TechAcad]

You're welcome 😊

[@neverendingcoralmaze]

You are the BEST!

[@pujagarg8062]

Hi...I'm using Netacad. Can you please tell from where did you select these cloud/ router/ etc. On right side of screen. Are these already in activity sheet or is there any separate video. Thanks

[@TechAcad]

They are pre designed packet tracer activity files. And we will be creating such topology in the coming videos. Thanks for your great support!

[@calebpate478]

how do you know what router you need to use?

[@wildaxiz]

yeah i am also wondering since there are several types of router

[@youssefhamdy8590]

if you are connecting the same types then it's cross over and if they differ then it's straight through

[@queenmo9921]

You are amazing thank you

[@TechAcad]

You are so welcome

[@fatimasaidu8183]

Great video, keep it up pls

[@TechAcad]

More to come!

[@mdjowelrahman271]

You should mention how did you open the activity wizard/mode!

[@quocoan7049]

Thank you so much!!!!!!!!!!

[@TechAcad]

Glad it helped!

[@karensalgado9749]

This was a HUGE help but for some reason my family PC won’t ping to Netacad.. I’m not sure what configuration step i may have missed

[@Miggiesmalls777]

Same here, did you ever figure out what was wrong?

[@angelareyes9901]

I can not ping to netacad.pka either

[@Cengolp]

Marshallah einfach der Ehreninder

[@stephaniedavid3830]

Hello, may I ask if what router and switch did you use ? And physical did you put, enable to having a a link lights?

[@TechAcad]

They are actually a built in topology activity called packet tracer activity.

[@davewoodside128]

Thank you!

[@TechAcad]

You're welcome!

[@abdullahmohammad5613]

which router do you use in this video?

[@sahildixit432]

14:00 IP ADDRESS TABLE

[@simonsee1072]

which router

[@KingofcryptoMrKOC]

which routers?

[@isaacgarcia8686]

great work

[@TechAcad]

Thank you! Cheers!

[@laohu5511]

it's a kick ass video

[@ziadmershed8026]

thank you

[@TechAcad]

Welcome!

[@hindsaeed5855]

Glad it helped! I have a question how shall I know which type of connection is required?

[@TechAcad]

That is depends on the device and port. And thank you so much for your great support and sharing!

[@Арушка-ц4з]

How to make a configuration so that everything works? You have everything ready, you can show how you set it up, it's very necessary

[@leluch5197]

what router you used?

[@TechAcad]

This is packet tracer activities. You can use any router for this configuration!

[@TheArcadeEmpress]

which router did you use for this lab?

[@TechAcad]

Actually it is a packet tracer activity file. I mean pre designed activity!

[@ZainAli-xp6sy]

Thank u so much

[@TechAcad]

Thank you too

[@tyl3r290]

thank you bro!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!111

[@TechAcad]

You're welcome!

[@javeriafazal1404]

Could you please explain why we used a fiber cable to connect the router and the switch? Usually, we use copper straight-through cable to connect different types of devices.

[@jerichoquintanilla4307]

Hello sir how did you make your cables/wires look realistic in the physical topology? Mine looks like some curved, colored lines. Thank you!

[@TechAcad]

There are options to manage it!

[@marksummers463]

EXCELLENT!!! Thanks!!!!

[@TechAcad]

Glad it helped!

[@CorvondreCurate]

The vidoe is very helpful but how I get it look yours do I download or press a link?

[@linksyad6392]

Do packet tracer need network

[@giorgosntomaris3371]

I am a bit late , but thanks for the help.

[@TechAcad]

Any time!

[@chuarex1077]

Hello may I know what type of router are you using brother ?

[@TechAcad]

This is a pre configured activity! You can use any router model!

[@BenjaminoBest]

Brilliant! 100%

[@TechAcad]

Glad you like it! And thanks for your great support and sharing our channel with your friends too!

[@gmansworld123]

How come a copper ethernet doesn't work with r1 and the switch?

[@ayshaalmuhairi333]

where can we find the answers to lab questions?

[@YoutubeUser01]

How will I know what cable should I use? (router 1 - switch)

[@Rosalinda-pc8bf]

Plsss answer me what router do you use? 😭😢 Is it router 2811?

[@TechAcad]

You can use any model here! Only check its interfaces.

[@heryprayoga1427]

What your type routers in video?

[@TechAcad]

We can use any routers available in Packet tracer. And better use the latest version of Router!

[@gustiandikajoni6427]

you're the best :)

[@TechAcad]

Glad it helped!

[@dextercinco658]

HOY YEL ARQUEZA, KZbin PA MORE!!! PANAY KA KODIGO

[@maciejh3866]

Pozdrawiam z Lekcji😂

[@akunlainnya2434]

How i cant click physical ,cuzz "switching to physical workspace is locked" why? :(

[@SalazarRosemarieG]

is it possible to do in other version of packet tracer? Because in 7.3.0 version there are specific name of device ( ex. 1841 router)

[@TechAcad]

you can use latest version!

[@mohammadasghari7593]

Thanks

[@TechAcad]

Welcome

[@justinemichaelmale408]

which router you used sir? Thankyou and how to ping netacad.pka thankyou

[@TechAcad]

We used the Packet Tracer Activity file. So it is a pre designed Packet tracer Activity.

[@drea416a]

Hello how do you know what cable goes to what device other than trial and error

[@TechAcad]

It is a pre configured packet tracer activity, and we may need to configure only the required topic!

[@sumansidhu2637]

How do we know which wire we going to where the wire is not mentioned.i am beggenner so please help me

[@TechAcad]

There are some criteria for connecting devices. And also we can understand the port by seeing physically. In real time, all the wires will be labeled initially to understand the other end! Thanks for your great support and sharing my dear friend!

[@gouravpb0662]

hi Am facing a problem with cloud and router 0 the connection shows red color please help me!

[@claudiu2800]

I watched a few great videos, but this one is not so clear to me. The problem is that routers, switches, etc all have the same picture. My problem is that my routers don't have the same connection ports, and even if I tried to connect with all the Router types it still didnt work. It would be great (in my opinion) if in the future you would use the devices name original like in Packet tracer. Because they are all up there and also renamed makes it hard to maybe see what the problem is. I hope I don't encounter the same issue in the next videos. Other than that, great job.

[@halluna9164]

gracias

[@Арушка-ц4з]

Can you show first how you put the elements, my cables are lit red, do they need to be adjusted?

[@TechAcad]

Please make sure that, you choose the correct cables

[@yashwanthindira3309]

Sir , i connected all as in this video but while i ping from family pc to netacad.pka it shows request time out and 100 %packet loss .what can be the error

[@MOHAMEDSAADELAFLEJ]

the ping of the server from family pc doesn't work for me!!

[@omanitheme6675]

hello brother do you have this file with you plz replay to me fast

[@fumawijaya4605]

Where can i get the pka file ?

[@TechAcad]

You can contact our team to get the files. And thank you so much for your great support and sharing our channel with your friends...!

[@Kellz145]

The best. I love you lol

[@TechAcad]

Glad it helped!

[@sumansidhu2637]

Can you please tell me what is the meaning of timer which is going on in packet tracer

[@TechAcad]

It is mainly for the evaluation purpose with a specific time! Thanks for your great support and sharing my dear friend!

[@9adrda]

i cannot get a green connection on my routers, neither to the cloud or the serial between the routers.. Does someone know a solution for this. Which router do you use. What components do you use in general for this activity?

[@WilLee-RuthlezzWrenchez]

Router-PT

[@WilLee-RuthlezzWrenchez]

but if you have netacad you would download the template "Connect a Wired and Wireless LAN". when you double click on the file it will have the topology already setup you just have to complete the connections and verification.

[@9adrda]

After some time getting it working, I noticed the file 😅

[@WilLee-RuthlezzWrenchez]

@@9adrda same I’ve been working on it for damn near 2 hours and then noticed it lol

[@9adrda]

😅 Good to hear that I'm not the only one.

[@Waddels]

THERES NO TWO CABLES THERESS ONE WHERE IS IT WHERES THEOTHER ONE