9.1.3 Packet Tracer - Identify MAC and IP Addresses

[@domenicocardilli5224]

My university teachers don't have the confidence and the ability to explain all these concepts with all this clarity. You are helping me a lot since i have started my uni and i really appreciate all these information. GOD BLESS YOU.

[@TechAcad]

Happy to hear that! And thanks for your great support and sharing!

[@orbostghoul8792]

This channel is hard carrying me through Networking, truly helpful guides

[@TechAcad]

Happy to hear that!

[@rtpeterson03]

Thank you for taking the time to do this step by step. Your tutorials are helping my to understand the process!

[@TechAcad]

Glad it was helpful!

[@rtpeterson03]

Yes it was. The only thing I could not find was the 20 questions with the answers that went with the lab

[@LexiePorter-t9u]

Thank you so much! This is STILL USEFUL IN 2024

[@TechAcad]

Glad it helped!

[@messageofgracetruth943]

What great information really appreciated Sir. Thank you.

[@TechAcad]

Glad it was helpful!

[@avanox3100]

owmyyygood!! YOu are fantastic!! YOu helped me a lot!! I understand now whole the exercise and I understand better now too how everything works 🙂You are athe best 🙂

[@aaronl8443]

Thank you sir you are the best cisco teacher!

[@TechAcad]

Wow, thanks

[@marksummers463]

why is there an outbound side on the final pc? Nothing went out. Also u didnt list the source and destination ipas at the switch or the hub even though they are in the outgoing PDUs.

[@luan866]

You are the best brother with your packet tracer videos

[@TechAcad]

Glad you like it!

[@rosettarosette188]

Thanks, this video was very useful to me, very well explained

[@TechAcad]

Glad to hear that! And thanks for your great support my dear Friend...

[@Jseagle1989]

Why are the Source and Destination addresses for Switch1 N/A, along with the SRC IP & MAC and the Dest. IP & MAC for the hub?

[@morganreardon1499]

You must consider the active layers. Go to the OSI model when you click on the PDU, and see that the only layer 1 is active for the hub. If the the data link layer (layer 2) and the Network layer (layer 3) are not active, you input N/A in your spreadsheet.

[@soulorozco661]

Thank for these videos. They're incredibly useful.

[@TechAcad]

Glad you like them!

[@WinstonMarlboro-r4t]

you sound like kendrick lamar

[@katomic9555]

26:55 can you explain again why the answer is 'N/A' for Switch 1: Src IPv4 and Dest IPv4?

[@itsra_quelluh]

Hello where can I get the answers for the reflection questions? .. it would be a big help for me

[@notsomeoneyouknow9814]

I wanna thank you so very much for helping 😄

[@TechAcad]

You are so welcome!

[@AmanNagokay]

Do we need to make and upload this excel file ?

[@beanis8108]

Thank you for making these videos! They are very helpful

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@ayato487]

Great tutorial dude :) Was easy to follow aswell.

[@camdensuarez1759]

FAX :))))))))

[@TechAcad]

Glad to hear that!

[@EliaraTafao_]

This is helpful alot thank you..bless your work x

[@TechAcad]

Glad it was helpful!

[@yasminkhdour1239]

I love your videos thank you so much for the in depth information.

[@TechAcad]

Glad you like them!

[@Freshstanced]

Great help! Thank you very much!

[@TechAcad]

Glad it helped!

[@maleesharajakaruna556]

Thank you very much for this video

[@TechAcad]

Glad it was helpful!

[@MultiAltron]

Thank you for all the help!

[@TechAcad]

Happy to help!

[@contradei5037]

8:04 Why isn't the dest. IP and Src IP N/A, isn't the information in the PDU? I mean i see it there. Why wouldn't you fill that part in?

[@elmirgerovic8771]

I was asking myself the same question at 19:45. I'm new in networking so I'm not sure but I think that's because the information of PDU at device 172.16.31.5 shows that the Layer 3 with IP Address was used in "OSI Model" tab. But for the Switch that's not the case in the same tab, we only see the Layer 1 and 2 used.

[@ahmadmuslih]

You are a life saver😭😭

[@TechAcad]

Glad it helped!

[@bloodbaron1990]

This was super helpful! Thank you so much for walking us through

[@TechAcad]

Glad it was helpful!

[@laohu5511]

Another excellent video , right on point.

[@TechAcad]

Glad you enjoyed it

[@user-ip1kc2tn2o]

how to synchronize between excel sheet and the PDU, I need to know if you made a copy-paste of table from instruction list to excel sheet

[@TechAcad]

Hi You can copy and paste but mostly the alignment will not be proper. We will create the entire excel sheet. And thanks for your great support and sharing my dear friend...

[@kristen2830]

Thank you!!

[@eliashidalgo2731]

You're the best.

[@TechAcad]

Wow, thanks!

[@avneetmaan1612]

Hii sir, can you please give me reflection answers for this assignment

[@davaidelay]

are you sure that hub doesn't have a destination IP address

[@ahmedomar9435]

28:30 how can you know which mac address is source and which is destination

[@nicbeaver3364]

It would be helpful if you uploaded a zipped folder with ur files in it so I could look at it when I have problems.

[@louisahmadi899]

Thanks 🙏

[@TechAcad]

You’re welcome 😊

[@sentinelone7068]

Is there a hidden command on this switches and routers that will allow me to get the destination of a packet from my end?

[@TechAcad]

There may be some pre configured devices in the activity!

[@sonixgod4236]

It’s kinda hard to do it without knowing what to do and sting up the computers and routers

[@muhdsyamil4963]

Where the reflection questions answers?

[@paramveersingh1673]

how to access the reflection questions' answers from your website?

[@TechAcad]

We will update it soon!

[@sagadeanimes]

Thanks

[@TechAcad]

Welcome

[@damilolaayorinde2885]

thumbs up to you

[@TechAcad]

Glad it helped!

[@sees4993]

where can i get the answers from reflection questions ?

[@mikeoxlong8210]

techacadhelp.com/9-1-3-packet-tracer-identify-mac-and-ip-addresses/

[@Toulkun]

Why N/A?

[@christiancatalan2943]

NICE

[@TechAcad]

Glad you like it!

[@MOHAMEDSAADELAFLEJ]

your pings always work without a single problem evrytime are you scamming people with giving them only the obvious informations?

[@idovideo9738]

why you talk too much. just do it and no need of too much talk.

[@guillermocavazos]

man he´s explaning

[@kevinsweet5260]

I don't think he talks to much he just gives an explaination according to the activity file it is very helpful

[@valjeancatlvr]

don't listen to this person. I can't stand the videos without explanation. That is why I love your videos. If someone doesn't like the explanation they should mute the videos. Simple solution.

[@elsa1803]

He explain really good, that's teaching not talking, it seems like you just want the answers and your comment is disrespectful, I like the video it's a great tutorial!

[@jeremiahvaneyck282]

Dude if you just want answers and not help then your just cheating some people use this to help them if they are confused you just want free answers plain and simple

[@udayakumarmanicka6366]

Great information really appreciated Sir. Thank you.

[@TechAcad]

Glad it was helpful!