hikvision dvr alarm output light ON/OFF using sonoff Mini, DVR Trigger alarm output motion detection

Buy online India : amzn.to/3atp12o
Hikvision DVR detect motion or movement or set smart event to trigger the alarm out to turn ON/OFF the light using Sonoff Mini
Hikvision DVR turn ON/OFF the light when detect the line crossing rules

[@Generalistas]

Thanks, see you from Brazil.

[@Techlogics]

Thank you too

[@cctvandnetworkingtechnical]

nice...

[@AkramKhan-yt2pr]

Super sir incridibal videos

[@sbkcs]

Nice

[@khalidhanoudi]

Good

[@lungrock4366]

good idea like monitoring backyard when someone try to passing sensor could turn backyard light on ,However have to test between PIR and Hikvision motion sensor which one is better.

[@socalducky]

PIR is way more accurate

[@Jo3_Black]

​@@socalducky Not if you have the latest Hikvision Accusense cameras or NVR with Accusense capabilities even without Accusense cameras

[@somnathtandale9190]

खुप छान

[@OtoSmart]

Great video. What type/model of Camera and DVR for this demo?

[@kamildemir3143]

I dont have alarm output on my nvr can i use audio output for s1 s2?

[@hikvisiona-b8514]

So great

[@Techlogics]

Thank you

[@hikvisiona-b8514]

Love your work

[@Amzouri360]

Thank you You can set ...Night .... And .... Day .....!!#

[@karthipatt]

Kindly send the link to but sunoff mini.

[@mericgoktug]

kullandığınız modülün ismi nedir nereden elde edebiliriz ?

[@britishpops7682]

Tried this a few times, but the relays keep burning, the wiring was ok. The bulb was only 5 watts. Do you have any idea what could be causing this ?

[@Techlogics]

You can try with delay relay instead of Sonoff Mini, kzbin.info/www/bejne/p5K3nop7j92KZrs

[@justatiger6268]

@@Techlogics I tried this and my Sonoff MINI blew up :( :( :( I think I also destroyed my Dahua alarm box :( :( :( I connected mains power to the MINI and then used small wires to connect the S1 and S2 to the alarm box, which was in turn connected to my Dahua XVR. (the alarm box simply expands the alarm in/outputs to my XVR. What did I do wrong? Clearly everything -_- But I want this idea to work!

[@eduardomiziara3536]

Hi friend. My outputs are the same as yours but the alarm output is sending power, S1 and S2 do not accept power. Do you have any settings in Nvr to disable this power sending? Thanks

[@georgedbell]

I keep having the same problem with my switches burning.

[@intelligentcam]

Sensor link

[@Mo-abdomoroco2]

الله يجازكم على المعلومة ولكن موسيقى تزعج

[@mickcarson8504]

That what I need, something that turns the wall lights on when video detects movement. But, then what about cats? Right now I have lost count on the number of cats and cat fights and sensor triggered security lights and wasted electricity. It's a war zone out there at night. How do you stop cats hanging around my house?

[@4976436]

put dog barking system and no cat will come near to your home.. or if you can find dog pee put it like geo fence near ur home and cat will move from there.. or you can ask someone with a dog to make the dog pee there.. i did and it work..

[@mickcarson8504]

@@4976436 That is a fantastic idea. I wonder if cats respond to that and shoo off. But then, these nagging neighbours who will complain about anything, even if you fart in your toilet room.

[@4976436]

@@mickcarson8504 I know dear some time neighbors sucks.. so you can do it at night time put that on a bottle and spray in your area.

[@Jo3_Black]

​@@4976436 You need to use Accusense cameras with Human and Vehicle detection only

[@mohamedbadr1223]

does this work or it will burn my replay

[@BackUP-hn7ok]

कैमरा की तार कटने पर, सीन बदलने, वीडियो लॉस,और कैमरा बंद होने पर तुरंत हूटर अलार्म बजने लगे। क्या आप सीपी प्लस का इस इंस्टालेशन का कोई वीडियो दिखा सकते है?? Hooters start sounding immediately when the camera's cable is cut, the scene is changed, video is lost, and the camera is turned off. Can you show a video of this installation of CP Plus??

[@bacchumondal8159]

My 8 channel DVR, 8 camera motion sensors can be activated.

[@Techlogics]

Usually the alarm input port will come 4, so maximum 4 sensor can connect

[@bacchumondal8159]

@@Techlogics thanks

[@Javid-Iqbal-Khattak]

Sir how i connect arduino with dvr. In my dvr have no output for alarm

[@Javid-Iqbal-Khattak]

Sir what cable i connect gsm project with dvr. In my dvr have no output alarm place

[@nalinakshanarumal6543]

Let me know hik DVR model no.

[@azmyacader]

where i can get this diy switch

[@Techlogics]

From Amazon

[@azmyacader]

TECHLOGICS if you can send me the link please

[@mphothabo8811]

What is the model of this dvr?

[@Techlogics]

iDS-7BXXHUHI-M1/S

[@vaddeanilkumar4951]

I don't have this alarm port in my dvr

[@Techlogics]

Then, you may try this method kzbin.info/www/bejne/rIKbaYB3hLmKmaM

[@justatiger6268]

THIS VIDEO IS DANGEROUS AND NEEDS TO BE REMOVED !!!

[@yorkincr]

Hi. I tried this installation but when I connected S1 and S2 (from mini-sonoff) to chOut1 and G (from HVR), it burned that channel. There was a little short circuit sound and short circuit smell. I want to know what could have been the problem. I am using a mini sonoff exactly the same as the one you are using. I am using a different HVR. Mine is DS-7208HUHI-K2. Before I connected the mini-sonoff to the HVR I was able to test both of them and they were functioning as expected. I was able to turn on the 120VAC bulb when I short circuit S1 and S2. On the other side, using a continuity test (electric tester) I was able to hear a beep for several seconds when line-crossing event was fired. // Something else is that when I test (+)S1 (-)Nin and (+)S2 (-)Nin, I was able to measure 65VAC on each of them. Is this what we are expected to get on each Sx? //*// This is how I connected mini-sonoff: Nin (bulb), Nin(outlet Neutral), Lin(outlet Line), Lout(bulb), S1(HVR alarm chOut1), S2(HVR alarm G, G that correspond to chOut1). I appreciate if you can help me find out whats wrong. I still have 3 alarm out working. Thanks

[@Techlogics]

Hi, I noted your points. If you facing the short/burn problem with the DVR/NVR Then the alarm out relay not present on your cctv device. For that you can use separate relay to connect the AC Devices Or You can directly use DC lamps without sonoff device. Or you can try with Email triggered Alarm using IFTTT kzbin.info/www/bejne/rIKbaYB3hLmKmaM

[@yorkincr]

​@@Techlogics At this point I am not that worried about the burned Alarm Out Channel. I am more concerned about learning from this experience. Once said that, let me tell you that I have been testing voltages in my HVR and it seems to me that Alarm Out Channels in this HVR are dry contacts. I trigger the alarm from the menu and I am able to test continuity between 1 and G (2 and G, 3 and G, 4 and G). After I test continuity I test voltage (DC or AC) and I get 0V, so it seems I am not able to power DC lamps without external relay. // On the other hand, I see from your video that your DVR short circuit S1 and S2 when it close and that turns on the light. I understand you don't need nothing else than that (shor circuit S1 and S2). If that is the case, what is the "alarm out relay" not present in my HVR suppose to be doing besides what it is doing right now? (close circuit when activated) Thank you

[@georgedbell]

Hi, did you figure this out? I have the same problem with the burning out. Also destroys my sonoff minis!

[@infideaglobal7557]

Make clear videos

[@binsonphilip4513]

You qukely show how can understand

[@XiONtv]

You can pause or slow down the playback speed

[@Xridhar]

Can I know the Hikvision DVR model no pls

[@Techlogics]

DS-72XXHQHI-K1. Also you can try usual DVR without alarm port kzbin.info/www/bejne/rIKbaYB3hLmKmaM

[@kawsariqbal6648]

আসসালামু আলাইকুম ভাই আপনার নাম্বারটা দেন

[@jpssekhon]

Useless