Samsung Galaxy S22 Ultra AM Film Glass Screen Protector! BETTER than Whitestone Dome!

[@joseaviles1575]

Might sound weird but a friend thought me that if you put a screen protector in the bathroom you turn the hot water on it eliminates most of the dust in the air…tried it and it really help…random thought but just thought I throw in here lol

[@TechnicallyTee]

Not weird at all but that process doesnt work with the screen protectors with the liquid glue. You'll mess it up if you do that. Lol.

[@chupappi626]

I installed it while showering and it worked. Thanks @jose aviles

[@bastiaan1532]

Imma try this lol

[@gilmour2214]

el inglés no es lo tuyo verdad, nopal Jose?

[@chupappi626]

@@gilmour2214 que?

[@sharonraquel2669]

Just installed replacement screen, following you step-by-step. I believe your video is even better than having an actual person here. He/she/they would have gotten on my nerves. Thank you thank you!!!!

[@adequatequality]

1 tip I would've mentioned in the video is to take some pieces of scotch tape and put them over the speaker grill as well as the 4 sides of the phone to avoid the adhesive touching those (kind of like the Whitestone Dome).

[@jdoshow78]

Will definitely keep this one in mind. I installed a different brand and it was ok. Seemed that the glue didn't hold to well so I went with the Whitedome as I usually do. There glue always seems to hold well. And so far my fingerprint sensor has work pretty much perfect. I'd say out of 20 trys you'll get it 19. And without having to hard press. Also thanks for mentioning to viewers trying not to open packaging over the glue. I alway try not to open anything over the phone once the screen is cleaned.

[@panzerxtream7007]

I watched your video and ordered AM film and just put on. It was as simple as you made it look. Thanks and Ill keep watching.

[@Stonefly2112]

Whitestone Dome and Amfilm Ultra Glass are nearly identical. Whitestone has a very slight edge in quality and its a hair thicker. Amfilm Ultra Glass is great as well, a little thinner and you can see a slight circle where you put the weight while it cures. The key to assuring perfect fingerprint reading is a great install and pressing HARD when re-registering your finger prints. I also think Whitestones coating lasts longer, barely. You can't go wrong with either. Except Amfilm Ultra Glass is now only made for the Ultra no S22 reg or S22+.

[@Mike_The_Hog_A_Nator]

I can't do screen protectors that have that thumb print circle. Looks like Whitestone for me🤟

[@alexanderyang8720]

@@Mike_The_Hog_A_Nator but is what he said true about the thumbprint?

[@BJPerryJr]

I've almost got this brand couple of times but always stuck with Whitestone Dome. Now I'll keep my options open since my GF is having issues with her Whitestone & I installed hers at same time as I did mine. Really good content man & greatly appreciated

[@TechnicallyTee]

No doubt. Just some more options out there to try out. My scanner worked good with the WSD but def works better with this.

[@BJPerryJr]

@@TechnicallyTee yeah I'm putting this in my cart now as we speak..lol I always have a backup for my screen protector

[@Stonefly2112]

They both work about the Same. Just make sure you press hard or very firmly when re-registering. I find that makes all the difference for some reason.

[@jackjira]

Saw some negative reviews about this screen protector on Amazon. It it worth to try?

[@Stonefly2112]

@@jackjira If you have an Ultra, this Amfilm Ultra Glass and the Whitestone Dome are basically your only options if you want your fingerprint reader to work with a glass protector. I have tried them both. I would start with the Amfilm Ultra Glass as it's a little cheaper and this is your install vid/ directions. Mine have worked great in the past if you install them correctly.

[@apexpredator_jku]

There's dozens upon dozens of reviews where the adhesive seeped into the ear piece speaker and ruined people's phones. Why they wouldn't include a sticker to put over that like Whitestone is a massive oversight.

[@slimd98]

I have a Whitestone on mine and I was going to ask the same thing,,it seems a little simpler but after buying a unlocked 1tb phone and waiting over a month to get it,,I would b pretty sick if the earpiece got messed up,but the concept is definitely simpler

[@annreinbeau]

This is precisely what I was thinking. Why not offer stickers to cover those openings?

[@DdotMaCK]

But the stickers he used to get dust off were clearly for that in my opinion... There were like 6 stickers

[@hankhill6569]

Did you see all those stickers?

[@DdotMaCK]

@@hankhill6569 so I bought the Am film and I can confirm there are 5 stickers for removal of dust for each screen. So 10 total in the package. There's also two strips of cardboard included to protect the side buttons... So really only the top speaker hole is at risk and some adhesive did try to drop down into the hole but as long as u follow instructions u shouldn't have a problem with it. And wipe it off as soon as u notice it. No biggie

[@Jasondranoff]

Great video... one trick I always do when installing screen protectors I do it in the bathroom with the shower turned on the steam it prevents dust from landing I always get a perfect install

[@lynneanderson4255]

Wow! I was just about to go with the WSD, but I'm going to install this instead. It seems like a simpler and cleaner operation. I'm glad I found your channel! Thanks!

[@Jj.everyday]

what I do to see most of the dust is to grab my flashlight (the one that attaches to my head hahaha) and it basically illuminates the screen and helps me see the dust more

[@TechnicallyTee]

Nice little hack right there.

[@stayingshredded]

Same. This trick has yet to disappoint. I try to minimize the time between grabbing the screen (after liquid has been placed) and catching all the dust particles with my sticker---super nerve racking. I was even using the dust sticker and flashlight after I placed the glue on the phone 😅

[@sharonraquel2669]

Thank you. These screens are terrifying!!! Have had my phone for more than a week. Returned one ineffective screen. Walking around with this expensive investment....screenless . I ordered through your link. When I get it, I will follow EVERY STEP IN YOUR VIDEO. I praaaaayyyy it works! New subscriber. BTW: Nice lighting in your video:-)

[@TechnicallyTee]

Thank you and much appreciated and let me know how the install goes. 💪🏽💪🏽

[@bluerider0988]

I wanted to try the weight trick with the Whitestone dome so I peeled the screen off and put the extra one on using a stack of washers taped together over the sensor just like you did in this video. Now the fingerprint sensor works 10x better.

[@TechnicallyTee]

Yeah I think the weight on the fingerprint scanner is key.

[@bluerider0988]

@@TechnicallyTee Another trick of you get areas around the edge that don't have glue on them, like you mentioned in the video, take a tube of the glue and remove the cap from 1 end only. Then carefully put it on the corners of the glass with no glue, and the glue will wick into the void. Then run the light on it again and it will be perfect.

[@richardr5888]

Sold. Thanks for the video. I've used whitestone before on my Note 10 plus, but I like how this installs and hopefully the weight helps out with the fingerprint scanner. Thanks again.

[@TechnicallyTee]

Yeah I haven’t had a single issue with the fps after this Install.

[@jakirhussain4727]

What happens if you want to take it off? How easy is it to remove and will it leave glue residue?

[@richardr5888]

@@jakirhussain4727 Use a blow dryer or heat gun to heat it and it comes off. If you do it slowly it comes off without cracking. No residue at all.

[@rm-pl7gg]

I just decided to choose this one for my screen protector. Thanks for the helpful info!

[@DennisChristilaw]

I am SO HAPPY that something BETTER than WSD is out there now. I ordered my kit for my S23U (and one for my wife's S22U) and am looking forward to it. The past few years, WSD has REALLY gone down hill. Thanks for this!

[@sadoxell5462]

Hey super late but how is the screen protector holding up? You reccomend it over the white dome?

[@xpane]

This is exactly why I use KZbin. Very clear and concise Thank you for the vid.

[@sammcdaniel3744]

I have been using amFilm for several years now, with several different phones and with different applications, like UV light to cure the adhesive,etc. This is a fantastic company, with fantastic produts. You can even register your product for a warranty, and they are great at replacing it if you damage it. Not very many companies that I would go out of my way to brag about, but this is one of them!

[@danielstott215]

You should also use an alcohol pad after the 1st curing process to clean up any excess glue before the second curing.

[@trinimassive33]

@TechnicallyTee, I love AmFilm. I actually installed it on my Note 20 ultra. And I actually got it again for my S22 Ultra. I actually prefer AmFilm over GlassDome not only because of price but it's just as great as GlassDome.

[@noelpaul4532]

Does the fingerprint scanner work all the time?

[@trinimassive33]

Yes it does

[@annreinbeau]

It's $1 less on Amazon.

[@Sway_Boogie]

@@annreinbeau lol

[@aliciathompson1504]

Thank you so much for those video. It went effortlessly. This is the first time I've ever tried this type of screen protector. Your step by step instructions made it super easy. I have no bubbles and was very excited to show it off. Thanks again😄

[@bluesky7838]

Thank you so much for going through this process so clearly, and alerting to the potential pitfalls.

[@Der_Micha93]

If you push the glass with your thumb towards the front camera on the left and right of the curved edges, can the glass be pushed out over the display? In my opinion, this is the biggest problem between tempered glass and Edge Display. You quickly have dust, dirt, etc. between the glass and the display.

[@BJPerryJr]

Tee I got these delivered couple days ago and installed on my GF s22 ultra & she likes it better than the WSD and I have to say it's a easier installation process, as I'm the one who does these things. I still have my WSD on my phone, as I've not had any issues still but will be installing the AMfilm when I need to change it

[@TechnicallyTee]

Dope stuff and glad to hear that it worked out for you.

[@stephenlouden480]

I installed this. it's great and I don't have that hideous circle from the weight because right before you use uv light. remove the weight..its wayyyy less noticeable than if you cure with weight on there. and it's still perfect fingerprint recognition. the weight slightly bends the glass at the spot after you move weight it's still bent for a minute just cure it quickly at that finger spot

[@katrinawhite8572]

Since I'm likely keeping my S22U another year, I wanted to add a sp. I cracked the WSD on my fireplace, and now AMF seems to be king. Thanks for a great demo 👍🏾

[@sparx2391]

Thanks for the demonstration, I've bought the UAG monarch kevlar case for my 22 ultra, and have put off getting the whitestone dome, as I think it would lift, this one looks like it would be OK though.

[@szurheal]

Please report back if you have any issues. I'm considering getting this screen protector and have the case already. The ZAGG Fusion XTR Curve with D3O I installed is giving me issues.

[@JCproductionspr]

any updates?

[@sparx2391]

@@JCproductionspr I fitted the whitestone dome and it's been fine with this csse

[@wheezsr]

I also have the Monarch carbon fiber on the way and also wondering which glass would be the best?

[@thegentleman90]

AMFilm is WAY better than WhiteStone. WhiteStone is 1) A LOT MORE EXPENSIVE 2) Weaker Glass 3) Too Much Hasle to Install. AMFilm offers 3 Glass kit. The installation is VERY EASY, and most importantly, they don't break the bank. Oh did I mention that AMFilm also guarantees your glass incase it breaks? Take a photo and send it to them along with a warranty claim and they'll send you a new one. No muss no fuss.

[@Atljeepboy]

Thanks for showing us a Whitestone Dome alternative. I know some 2 piece cases might have a problem with whitestone dome.

[@SheilaHensley]

Excellent, Tee. That also showed me the actual size of the ULTRA. Thought it would be bigger. Probably because I want it to be bigger. Nice vid.

[@Stonefly2112]

ULTRA is HUGE.

[@SheilaHensley]

@@Stonefly2112 thanks, I need HUGE> :D

[@pinayee]

Just found your video today about this screen protector and I happened to receive it in the mail today. Thank you for walking us through the steps. It worked flawlessly! Well, mine did however my friend's did not and sure enough it was from pulling the tabs out too fast like you said! She got two bubbles argh hehe.

[@richardcontiga526]

Geeezzz.....thanks for the vid....had to return the WSD protector.....cause this glass is 1000x better with the fingerprint over WSD....u got yourself a subscriber!!

[@TechnicallyTee]

Thanks much appreciated and welcome to the channel!!

[@kylespangenberg6502]

Really appreciate this video. I watched your whitstone video and considered buying it, but then you dropped this video and I think I'm gonna go with this option.

[@TechnicallyTee]

I both are really good but I’m getting better fingerprint scanner performance with this one.

[@petervernelen6784]

Thx for the straight forward video 👍 was going back and forth between this one and the WS dome think I made up my mind and order the Amfilm, need to check out some nice protective cases now...that rabbit hole is deep though 😀

[@TechnicallyTee]

Haha yeah it's a solid choice I like it over the WSD. Yeah the cases are a rabbit hole for sure.

[@petervernelen6784]

@@TechnicallyTee if you could choose 3 cases and one glass for the S22U which ones would you pick ?

[@stopherton8012]

@@petervernelen6784 I always get UAG cases for my phones I'm getting the UAG Monarch for my S22 Ultra they are on the expensive side costing $60 and $80 but they are worth every penny guaranteed.

[@petervernelen6784]

@@stopherton8012 Thx for your reply I'm sure the UAG monarch & pathfinder are hard to beat when it comes to protection but I'm not really into the very rugged design, maybe the civilian or plyo?

[@scism2085]

Thank you. I notice you used both bottles of glue...so if two are supposed to be used does that mean no glue left if you need to install the second protector in the future? Also I noticed no sticker for protecting the ear/speaker?

[@NonLegitNation2]

I bought some generic no name brands tempered glass creen protector for my S22U, it's the same installation and so far so good. I would say the fingerprint sensor works about 95% of the time. The one I got cost about 5 bucks less then am film. Also the one I got has a UV light that covers the entire phone and it's usb-c, and tbh it doesn't look as janky as the one AMFilm gives you, lol, it looks like that UV light was a afterthought for AmFilm

[@TomShadowrider]

Isn't there going to. Be a shadow of a square and circle where the weight is? When I did the whitestone. I lend the long plastic piece on my screen firning the first cureing . And I'm the sunlight I saw an outline of where it all sat. And now that the sticker and weight is there I feel like you'll see where it was in the light

[@TechnicallyTee]

It's funny you say that because I use the weight on the WSD and I can see where it was but I can't see it on the AM Film.

[@stayingshredded]

Domeglass + weight circle + coins = consistent fingerprint reading with no additional added pressure

[@salriggione]

Feels counterintuitive putting glue on the phone, but it looks good. Nice table, dude. Well done!

[@TechnicallyTee]

Thanks much appreciated! 💪🏽💪🏽

[@kobi6y6]

Thank you very much! Iv’e ordered the AM screen protection and this video helped me a lot!

[@TechnicallyTee]

Glad it was able to help you out!

[@LtGIR]

Thanks so much for this video. I normally use rhinoshield impact film protectors on curved screens but wanted to check these out. You did a great job with the step by step.

[@matrix1169a]

Third time is the charm. The average consumer wouldn't be thrilled to have two failed attempts like you had. I did do a slow drop and still had tiny bubbles at the top and bottom. I noticed you used the prep wipe first then the wet wipe, which is the opposite per their video on Amazon and website. I felt my bubbles were from the prep pad because it has an oily texture. Anyways, my second install I avoided the prep wipe and no tiny bubbles. What made you use the prep wipe first?

[@6maxwell99]

AmFilm is the best. That's what I had on my S20. Never had any issues with it.

[@2FittedBW]

Great to have options. Especially with a curved screen.

[@YukonHawk1]

I really like your no nonsense approach. I just subscribed to your channel. Thank you for your quality and cool content. Peace.

[@heckemXD]

The issues I've had with screen protectors like this on my note 10 plus when I had it is the phone case would bump the protector off the phone, hopefully this works well with the s22 ultra and a case on

[@kronosaurus]

Fantastic instructional video on these liquid type installs.

[@TechnicallyTee]

Thanks much appreciated! 💪🏽💪🏽

[@sharonraquel2669]

I just installed mine today. I followed you step by step. Looks great, but I have a little black dot under the screen🤔. I have no idea what it is. A little annoying. Maybe I'll do it over someday. Thank you for the instructions!!!

[@AndreShorterTV]

i prefer amfilm over whitestone dome because you pay slightly less for it and the quality is on par w/ whitestone dome. it's case friendly as well. i've used it on my galaxy note 10 and currenly my galaxy s21 ultra.

[@Idontwantahandle1111]

Whitestone dome is case friendly tho

[@cesmobile]

i see no masking for the ports and buttons . Did you run into a issue that the glue made contact with them ?

[@TechnicallyTee]

Nope and I’ve installed them multiple times on other peoples devices and no issues. It doesn’t get glue everywhere like WS because it’s two smaller globs of glue rather that one.

[@cesmobile]

i appreciate the heart and like but my question wasn't answered . IM just wondering before i buy this or the whitestone . i know the whitestone does but i wanted to know if any glue leaked to the buttons or near it .

[@TechnicallyTee]

I clearly answered your question in my reply.

[@markbr9429]

Beware! They don't provide a ear speaker protector tape like the whitestone so if the glue gets into it you're gonna block it and you're call audio is gonna be affected. That stuff will be really hard to remove if it gets in and you don't wanna see an expensive phone affected like that

[@TechnicallyTee]

The glue doesn’t run that far and it will be fine. I’ve installed a few now and no issues.

[@stayingshredded]

I forgot to place a sticker on this for my S20 Ultra (using the WSD) and was unable to hear the caller. Was left with either talking on speaker phone or resorting to using my airpods pro.

[@Liquidlex6]

@ 12:39 you have these cool icons on your home screen. Could you please share which ones you used?

[@sevkavros3861]

Look like HIHI neon ikons. But any way would like to get this pack ikon🙂.

[@Gregt7694]

Off topic but what launcher and icon pack is that?

[@benlynch5740]

I had the same question

[@Eddiechavez818]

So I used this same technique lined up the screen protector to the tabs that slide out , but for some reason it's flush on the bottom and I have a ⅛ gap on top where camera is. Anyone know where I can get more of this same glue?

[@amnol2]

Great video Tee! There is also a Mowei branded glass screen protector which is also well reviewed.

[@stayingshredded]

I think Mowei has best quality glass and fingerprint sensor. The reason I took it off and went with WSD is bc the glass covered the front facing camera.

[@AKdagr8]

I feel like whitestones quality has dropped drastically this year. My fingerprint barely works. So I'm going to try this one out

[@yAyO118]

Is there a soak pad for the earpiece?

[@TechnicallyTee]

There isn’t but never had an issue and I installed a few of these.

[@LisaKnobel]

Great video. I messed up on dropping the glass the way you recommend, so I ended up with a couple of big bubbles. Decided to just chase them out with my finger. Maybe I messed it up, but I figured if I was going to have to redo it, I might as well go through the process with the messed up one and see what happens. Ended up with two micro-bubbles. Still looks better than any other screen protector I've ever installed before! Hope it holds up. And I still have the spare if I do need to replace it.

[@TomShadowrider]

So I just applied this to my phone, and when I clean my screen after, it's hard to explain but I see the outline of the sticker from the fingerprint sensor. How can I fix this?

[@TechnicallyTee]

Yeah I feel under certain lighting you can see it. Doesn’t bother me that bad but I don’t think you can remove it. Comes from the weight you put on the scanner when installing.

[@ashamane]

Wish I saw this video before I bought the whitestone dome haha. That installation was incredibly complicated and not foolproof. Your videos are fantastic, though, even if the product wasn't. I appreciate you.

[@fraire83]

Great informative video. What theme are you using for your phone?

[@TechnicallyTee]

The icon pack is LineX and I did a whole video going over the customization of my S22 Ultra. Thanks much appreciated! 💪🏽💪🏽

[@AnythingGoesJoJo]

I had mine installed perfectly...but after 4 days I started getting air bubbles and it gor bigger and bigger everyday so I ended up removing it. Anyone had the same experience?

[@Earl1403]

The instruction video says to use the wet wipe first, then the cloth, and then the screen prep wipe, do you think it matters ?

[@debprosadadhikary4840]

Thanks, how often this should be changed?

[@sagars9387]

I had this screen protector on my S22 U but had to take it off and go with the Whitestone dome glass. Amfilm has a circle where the fingerprint scanner which is visible on the white backgrounds.

[@massimocapobianco1035]

same experience here! exactly same issue

[@frankcasillo8814]

I have a question. Is there any protection for the earpiece? Can flue get in there? Please respond im about to make the purchase. 😀

[@HoormazdKia]

Great video! only problem i'm having is the bubble is SUPER noticeable over the fingerprint sensor and hasn't gotten better hours later. I already got my free replacement in the mail, not sure what I did wrong here EXCEPT i put the glue bubbles on the line, instead of inside the rectangle? Maybe that was it.

[@massimocapobianco1035]

same issue here with a strange glue circle noticeable with white screens background... annoying

[@scaryguy101]

I have some questions about this type of screen protector. Why is wet glue needed to put on the protector (why not have an adhesive on the screen and stick to the screen)? Is there a chance for the glue to leak down past the screen and ruin the phone? How hard is it to remove and will the glue ruin the screen if removed? This was a great video and been watching all your s22 ultra videos. Thank you!

[@alphaxsnowwolf9376]

How long have this been on the phone also how easy are they to come off as your uesing glue

[@any4003]

Man! Lol this guy's got me wondering if I made a mistake by purchasing the Whitestone case I got it on sale for like 36 bucks Lol ironically he was the one to convince me to get the WS

[@cial577]

Hi I have the s22 ultra so you think that the tempered glass is better then the film screen protectors for drops

[@bidkarsalazar626]

Thank you friend. You did a great job on this video. One quick question, any concerns on the adhesive poor down into the speaker or microphone holes?

[@676384]

Whats the name of the application or icons your using 🤔

[@KuroSukotto]

are there protectors out there that dont use adhesive/uv resin but have a non visible fingerprint scanner?

[@Chris-B-Bassin]

Great video. Glass or film for s22 ultra? Im considering this one an wsd for my phone, i do like the protective stickers with wsd kit...

[@Rmbrown1964]

Great video again! I purchased the WSD the fingerprint sensor wasn't working at all. Unless I lick my finger. I will try the am film next. After this I give up lol.

[@TechnicallyTee]

Haha man I get it for sure. Let me know how this one works when you get it!!

[@MrLawlessGaming]

Hey man great video! I love the look of your home screen! Are you using like a different launcher or something?

[@TechnicallyTee]

Thanks mu CJ appreciated! Yeah I’m using Nova Launcher and and custom icon pack. Check the video out on the channel where I walk through my customization.

[@elsanto8879]

My man Mr. T Bone Phone droppin another great one! Thanks for sharing youngin!👍🏼

[@TechnicallyTee]

Thanks much appreciated! 💪🏽💪🏽

[@Shaunycentral]

Great video thanks! Any chance of the glue getting in the earpiece?

[@TechnicallyTee]

I’ve installed a couple now and I haven’t had an issue. With the being split when it comes to the glue I don’t think it’s enough to get in the earpiece.

[@stepot3715]

is there is better than white stone done? even spigen glass gstr same process tempered by white stone.

[@kingcc2]

What about fingers prints? Do you see a lot of them on the screen protector after touching on it a lot?

[@AmolPandits]

nice video. what icons pack you using ? they looks awesome

[@TechnicallyTee]

Thanks much appreciated! Icon pack is called LineX.

[@johnmalone1616]

Has anyone tried this with any of the UAG cases especially the monarch?

[@szurheal]

Please report back if you have any issues. I'm considering getting this screen protector and have the UAG Monarch Kevlar case. The ZAGG Fusion XTR Curve with D3O I installed is giving me issues.

[@johnmalone4101]

@@szurheal I actually went with a dry application TPU screen protector. I had one on my Note20U without any issues.

[@davidaparker]

awesome video!! followed your steps and nailed it the first time! great job!

[@shannonlove536]

Love your instructional videos. Does this company have a privacy screen protector w/ fingerprint support for the s22 ultra?

[@Maxiiim02]

How's the oleophobic coating? Heard good things about the Whitestone dome oleophobic coating.

[@petervernelen6784]

How compatible is this glass with a case for example the otterbox commuter, thx in advance ✌️

[@petervernelen6784]

@TechnicallyTee ⬆️😉

[@hugoye]

So can you have an equally good installation for the fingerprint scanner if you just put a weight on the whitestone?

[@TechnicallyTee]

So I used the weight off this installation and did it with the Whitestone and it left the glass wrinkled where the scanner is you can tell at an angle but it works perfect.

[@Stonefly2112]

@@TechnicallyTee Whitestone just uses a thick heavy piece of plexiglass in lieu of the weight. Same purpose

[@enriquegavidia8392]

Hello! Do they have privacy screen with this fingerprint? Any links? Thanks!

[@ehabsh4933]

Hey man, thanks for the video. I have a question! Does the fusion x case fits with amfilm glass screen protector without causing it to peel off? Thanks!

[@ehabsh4933]

please reply!

[@nazar6575]

My Ringke Onyx has no issue

[@SJF15]

After watching your video I was all set to buy this product, only it seems it's not available in the UK.

[@topjii]

Does it mess up the screen when it breaks? I heard alot of people have issues removing these glue based protectors

[@im_mayank]

What can i do if my s22u's glass have slightly air on down side right side corner ? Can i aplly it using liquid ad uv light?

[@wildbil8914]

What is a great case that would work fine with this glass?

[@coolcos24]

Great vid Tee imma def check dis out cause my white stone already chipping from the edges and not even a full 2weeks 😩 and never fell lol

[@TechnicallyTee]

Sheesh yeah that's not a good look.

[@santijr007]

This is cool ! Do they have this for iPhones ?

[@Pandemonium088]

Do they not provide a sticker to protect the top speaker/mic and buttom mic hole?

[@fjtortorelli]

I have a quick question: it's compatible with the Samsung Protective Standing Cover? If it was mentioned, I didn't realize it.

[@angryace4017]

How easy is it to get the screen protector off with that glue on it? Does the glue clean up off the phone easy enough if you mess up the install or need to replace it??

[@MrBenjarniSherwin]

Not available in the UK for some reason, only the AMfilm cheap screen protectors

[@TechnicallyTee]

Ahhhh that's sucks for sure.