Cooler Master Cryofuze Violet VS Noctua NT-H2 Thermal Pastes.

[@xenajin6827]

Thanks a lot. I was confused between arctic mx-4 and this. To see it hold its own against nt h2 was insighful though

[@TechnologyHive]

Thank you for watching :)

[@frazerxavier7295]

The intro was too good. 😁Nice comparison brother.

[@TechnologyHive]

@frazerxavier7295 Hehe, that's the classic barking dog man 😆. Thanks bro. Trying to bring new content.

[@read6281]

Hey brother cool channel. I was wondering if you could compare Arctic MX-4 vs MX-6 in the future? Thanks and keep up the good work

[@TechnologyHive]

Thanks for pointing that out. I can't believe that after all these videos I have never actually compared the two. That's content for a future video!

[@LassassinX]

Could you do one with the cyrofuze gray version? It claims to have 14W/m

[@TechnologyHive]

Ill look for it.

[@kommandokodiak6025]

I probably told you in another of your paste videos. NT-H1/2 are not good pastes period but the worst option for GPUs and any direct die application, the reason being that the paste is rated for a low temperature range that cause the paste to breakdown under the heat of the direct die which exceed the temperatures you see in the software because its lasting in the microsecond range of time but over hours of use these peaks break down the paste. If you want another paste to review look for Alphacool Apex it claims 17/wmk coolermaster also makes an even thicker paste called MasterGel Maker

[@TechnologyHive]

@kommandokodiak6025 Thanks for the tip. I'll look for both tonight and order them. 👍🏼👍🏼 I may have read your comment from a while back. Not that I ignored it, but I do like to test things myself before passing judgment. In this case, I think you're right on the money.

[@viggonord1723]

How is the thermal paste holding up now? 2 months later

[@TechnologyHive]

Temps are still the same. Thanks for bringing it up. Still holding solid 👍

[@LucasDaRonco]

Last Cooler Master thermal paste I used wasn't that good. I just stick with MX-4 and MX5 for most uses, you don't really need more.

[@TechnologyHive]

@LucasDaRonco I stick to MX-4 and MX-6 myself. But I'm also liking these phase changing TIMs, like Thermalright Heilos and PTM7950

[@DJSammy69.]

I just re-pasted and serviced my Strix 5700XT with Iceberg Thermal FUZEIce Plus and 1990core/1800mem i get furrydonut 80c / 103c hotspot.

[@TechnologyHive]

@@DJSammy69. I'll have to look at that. I've never tried it, though I have seen it for sale online where I live.

[@DJSammy69.]

@@TechnologyHive Could you test next paste with the new Furmark 2.3.0 It pulls 301W using donut from my 5700XT. There is 30'c between core and hotspot. Knot pulls only 200w. There is two different tests and GL & Vulkan for both.

[@TechnologyHive]

@@DJSammy69. I'll see what I can find.

[@DJSammy69.]

@@TechnologyHive Cool.

[@normaldude6699]

Have used the same violet thermal paste for my hp pavillion gaming laptop , on last gen games it gives anywhere from 77-86°c but on current gen games(last of us, horizen forbiddwn west) on low graphics i get 90-96°c , if possible can you suggest me some good thermal paste from amazon india

[@TechnologyHive]

@@normaldude6699 If you want the best thermal solution, I'd go with a phase change material, like Thermalright Heilos or Honewell PTM7950.

[@salemas5]

So now even thermopaste has RGB ?

[@TechnologyHive]

hahaha! Looks like we're heading that way. 😂

[@rompeldipp8488]

Driver du mye inn på finn? :o

[@TechnologyHive]

@@rompeldipp8488 Noe ganger 😆

[@thelasthallow]

need to use more paste, you want to use enough that it pumps out the sides.

[@100500daniel]

You need PTM 7950 and a washer mod if u want to get low hotspots...

[@TechnologyHive]

@@100500daniel I just need Thermalright Heilos. Does the job better 🙂

[@leemercey2260]

People just do not know much. I bet they plugged in the monitor into the motherboard with a cpu without graphics support.

[@TechnologyHive]

@@leemercey2260 I have had that happen many times with people 🤣

[@leemercey2260]

@TechnologyHive this stuff is so easy. But I've also researched the bejesus out of every part available for my targeted build. Some people!

[@leemercey2260]

@TechnologyHive where do you sell your stuff i need a decent GPU for my neice.

[@TechnologyHive]

@@leemercey2260 I live in Norway. I sell locally only.

[@owais3558]

Can anyone suggest a good 1080p monitor or a cheap 2k monitor

[@TechnologyHive]

MSI 27" gaming G2712

[@leemercey2260]

Looks like you were scammed by your customer.

[@TechnologyHive]

How so?

[@20011651]

Noctua thermal paste is garbage based on my experience .

[@TechnologyHive]

@20011651 NT-H1 has an issue with pump out NT-H2 works well. Have you tried it?