I had the same problem with my rx 6600 XT from xtx version qick. Hot spot on this card was even 105c. Year ago i changed from thermal grizzly to ptm and it was really big change. On thermal grizzly i still had like 20-25c delta depends on game but now at full load on furmark its like 20c delta, in game its more like 10-15c

Sir, do you know the proper thermal pads sizes of sapphire pulse rx 6700xt . Ny card is going 80 degrees and hotspot more that 95 degrees , it’s quite good for my 35-40 degree room temperature 😂. Still wanna know cuz i want to change the pads and paste.

I had this problem with a Sapphire Rx570 and your sanding trick worked great, thank you very much.

Testing my 32 gig 3200 MHz set right now. Hoping it will be a stable 3600 MHz with 1.4 volts.

how is this LTP 15 compared to k5 pro? planning to buy one of these for laptop

And thats why I recommend always going Invidia for high end cards. With amd youll for sure get really bad coil whine and horrible temps. People are really biased towards amd just because it usually gets more fps than Nvidia but look at what you get lol.

🙂Sapphire has by far the best quality of AMD partner cards. I have a Sapphire Nitro+ card running in both of my rigs, the main gaming rig has an Nitro+ Vapor-X RX 7900 XTX and the second system has an Nitro+ RX 6950 XT. To be honest, I wouldn't consider anything other than Sapphire cards. Well, maybe a Powercolor Red Devil because I've only had good experiences with them personally, but that would be it.

nice video bro

Idk why but my rx 6600xt by gigabyte after two years now was giving me 76c core and 95 to 97c hotspot in games like hogwarts legacy and even gta 5, later in nfs unbound. Results were more in hogwarts legacy, until I gave it to the seller and he sent the gpu for rma and all they did was repasting and it’s still under warranty. Day one and it was all good, other day it just became so worse like core and hotspot temps were like 79 to 80c and 100 to 105c until the system reboot itself. I decided to disassemble the whole pc and just clean everything, though I clean every month. I have a thick radiator from deepcool le 500 which wasn’t able to be mounted on the top so I switched my front two fans with radiator as an intake and those fans as an exhaust on top. Not so good ik that as it pulls hot air, also today I noticed that the gpu is assembled with all screws tight, still I see a gap on one side, a medium sized gap like it isn’t mounted properly. Idk but I had contacted again and the seller has asked me to give it to him and he’ll see what he can do.

Hi already seen your video because I need some help i'm using RTX 3070 ti Zotac aorus and I needed to change the Thermal paste and Thermal pads because always was on 80 degrees and with this change now I have less degrees like 71 but My problem is with artic mx6 when I applied at couple of 2 months sometimes less my temps goes higher like 78 depends the game yesterday I was playing and I haf 78-79 gpu temp but hotspot was on 96 was to higher also before this because I didnt was monitoring I had a black square artifact than goes more and more bigger on plague tale requiem ultra 1440p I restarted My PC doesnt freeze but i'll restarted to check temps only hotspot at full load gpu was 95-96 degrees and memory and gpu temps 78 so I changed Thermal paste another time after a month or 2 don't remember right now and now my temps are normal on 71 degrees gpu hotspot 81-82 tomorrow I'll go to receive Thermal Grizzly Kryonout but I don't know if I'll go to spect the same results I only not want to change thermal paste every month do you know why this happening ? I'll go to use Thermal grizzly but alot of people saids than dry so quick so I don't know why Thermal paste when I applied I can play 1 or 2 months and memory temps never reach 90 degrees I'll hope you can help me to know whats the problem i'm thinking about your method aplication but with that method I waste more paste and also some.people said than need to be a uniform install with backplate and processor

Sapphire is doing a very good job if it comes to build quality and the parts they use. I've got a Nitro+ 7900XT and iit's one of the best build cards ive ever owned. The only thing i don't like is the VRAM temp. It's a problem with all RX 7000 cards (7800XT and up).

Don't know why the industry hasn't innovated a solution that's being growing ( literally ) over the years? "Cards" stopped being "cards" when they went from single slot with minimal weight to a card with 1KG of copper and aluminum hanging off one side. The PCIE ( or any connector ) should NOT be used as a structural support. Vertical mounting the GPU connected by the flexible cable takes pressure off of the PCB connector.

Which is better? Thermal Putty VS Thermal PAD

4070ti was better for same price

Не кликбэйт спасибо

Смотрю видео , если кликбэйт ставлю дизлайк

Installing your gpu vertically in this type of case is a big mistake... That's why your temps are insanely high for that model.

I like thermal putty, it's great for small devices like laptops, phones. thermal pads are hard to find the right size, especially small devices.

Builded like tank - lived on warfare less 5 minutes 😂

Nice video, brother. Sapphire Cards are really Good. I, too, have very few AMD cards that I get to repair.

Would multiple anti sag supports resolve the problem. For example one motherboard bracket and two supports on the outside? I don't have the space for vertical gpu mounting.

sand it :P

I set tREFI to 50000 but when the stress test reaches a temperature above 55, an error appears. How much should I adjust to reduce the above situation?

...brass are worst than alu..dont get scammed..how to check if its pure copper or not...?

I have 32GB of ram of that same brand and model at 3200hz I want to adjust the latency to CL16-18-18-36 without increasing the frequency is feasible, watch out I have a Core i512600kf CPU An ASroCK Z690 Extreme board

is it normal for gpu hot spot to be hotter than my gpu temp if its 30 celius difference?

I bought an fe 780 a few months ago just as a display piece. I love the aesthetic, always wanted one as a kid.

Ever heard of ESD!!!

Could you teardown the 7900XT SAPPHIRE Pulse? Im having a hotspot issue aswell and would Need something Where i can See step for Step how to remove all the parts correct.

b shit

Hello and thank You for this video review. I'm going to buy this GPU. Could You please tell me if it is quiet? Are there any buzzing or other noises? And what about the fans? I think they don't move at all if You are not playing games, right? All the best.

7950 on my red devil 7900xt = -20c hotspot😍

yo man! good vid, I bought this together w my entire pc like 2 years ago. but i have a problem so i ran out of space on my pc, i only have some 1tb NVMe M.2 but i need more, i dont have no HHD or whatsoever, i use my pc mostly for gaming but also jus regular work, what should i buy to get more space? (i dont know nothing bout this type of shi sorry)

I just ordered a 2080ti on Ebay for $240 bucks. I've been wanting a 4070 but I don't want to spend that much. My second option was for a 7800xt for $489 but even that was a little above my budget. I really needed something around $350 but there's Nothing in the New Market for that price that has any real performance. I had completely forgotten about the 2080ti and stumbled on a Dealer on Ebay that had an Asus Turbo 2080ti that has a Guarantee. The images look good enough and the Ebay Store has great reviews so I'm taking the chance. At the very least, I'll apply some new Thermal Paste and maybe some Thermal Pads. It might not be quite the Performance of the 7800xt or a 4070 but for $240 - I think I'll be happy enough for what it has to offer. It'll certainly be a great update from my 1070ti..! Worse case scenario, I'll be able to return it and get my money back.

I have around the same size delta on my 7900XTX Red Devil. Im gonna try a new DP cord first. Then ill resort to thermal grizzly graphene for the graphics die and then GELID thermal pads for the rest. 🤞 Also if you live in America, the warranty sticker does not apply.

MX-6 is one of my highly recognized thermally conductive silicone greases, ranked in my mind: TOP1 MX-6 TOP2 M12 TOP3 MX-4

the off the shelf suppors can cause it to bend I 3d printed a groot figure that supports the whole card not just the back half full support or no support is best in my opinion

Anderson Frank Johnson Kenneth Clark Charles

is it compatible with lian li o11d

Lee Michael Miller David Moore Jessica

Qué te hace asumir que la cuchilla de afeitar es completamente recta?

I got 2 kit of 2x16gb ver.4.31 3200Mhz lpx, on a MSI B550m Mortar, Ryzen 5800X (curve opti -26, stable as a rock) but I am unable to oc the DDR4, is it because of the 4 slot issue ? (ram kits serial are showing about 120 production turn between each, so they should be really close to each other.. Any suggestion for a 4 dimm OC ? thank you

i bought this exact ram, but my motherboard only supports up to 2666 Mhz. Is it still possible to use this RAM at 2666 Mhz? And if so does it reduce the lifespan of this product. Also if it is possible to use at 2666 Mhz, would I be able to enable the XMP 2.0 at such rated speed?

Would using a raiser/vertical mount potentially cause other issues? Having all the weight just hanging off one side couldn’t be good either or am I missing something? 🤔

42 minute... and you limited the power too much...

GPU supporting brackets are a great tool when used properly. the purpose of that tool is to provide support. not raise the gpu. when users think its better to let it bend upwards instead that's when things go wrong.

Just sold this exact model to someone for 75 bucks I hope it serves them well

Essa MX-6 é uma bosta... 3 meses após aplicação o hotspot da minha placa de vídeo batendo 105graus... um lixo... ao abrir a placa pra trocar a pasta, verifiquei que a mesma tinha "derretido"... não recomendo!

How do we get exact size for 14700k CPU?

I'm interested in the Thermal Conductivity (w/mk) of Conductonaut Extreme, PhaseSheet PTM and the KryoSheet. But amazingly these are found NOWHERE on their website. Not under Technical Details, and not even in the datasheet I downloaded. What are the values? And why the hell are they not being transparent with this information?