Making Circuit Automatic Charger full battery 3,7 volt

[@bmcgorakhpur5787]

V nicely explained how to repair a damaged battery box. Thanks.

[@chuberube63]

components 1. Bc 548 transistor 3₹ 2. Two LEDs 2₹ 3. 1k resistance 50 paisa 4. 220 ohm resistance 50 paisa 5. In 4007 diode 50 paisa

[@elektronikaelektro8008]

I dont see transistor

[@leopoldofernandezjr4441]

What is paisa mean?

[@leopoldofernandezjr4441]

No transistor in the video

[@EliteGamer8825]

@@leopoldofernandezjr4441 1 paisa = 1/100th of Indian Rupee

[@EliteGamer8825]

@@leopoldofernandezjr4441 50 Paisa means 0.5INR (0.0068 USD)

[@sunilssil]

The video is good, Please share the components details used in description.

[@fuadhasan594]

Kalau di lihat dari videonya, kemungkinan partnya: 1. LED 2 buah (merah,hijau) 2. Resistor 1k 3. Dioda 1 A 4. Dioda zener 5v Input 5 v Kalau ada yang kurang atau salah mohon di koreksi

[@bangmexi8891]

Kira2 LED-nya brapa volt header..?

[@Akoegbepeter]

The battery are connected in series, 5 volt will damage the battery

[@pipercub45]

When you are showing the end view of the LEDs, it is hard to tell if the LEDs are on or off. Thanks for the video!

[@Narpy_the_dog_man_kid]

Yeah its a genius idea.

[@javiermariani9800]

Xcelente video pero debes explicar a largo de los materiales y componentes que se utilizan y así tener una mejor preparación al hacer el cargador de baterías

[@eliaseinston4715]

I am from Spain and I understand that the battery power supply what it does is connect the neutrals of the diodes and neutral Battery with the neutral of the usb, then adds to the usb phase a diode and then add to the usb phase a resistance for the Led that I imagine is less than 5 volts (you will have to look at an Led equivalent to 5 or else you add a resistance), then you add in the diode the phase of the battery with a zener towards the red Led. Then try it and that's it.

[@IslamHk-lg7op]

انا لم اشاهد اشتغال اليدات، كان من المفروض اطفاء ضوء الغرفة لنلاحض استغال الليدات شوقتنا تبدو الطريقة جميلة وبسيطة وفعالة خاصة لو اضفت بعد الصمام زنر قايت موصفت وستعملته لفصل الكهرباء بعد الامتلاء البطارية م...............

[@elyaabe.inventions]

Great job, I wish you success in your career. Thank you for the information

[@italpark9747]

Muchas gracias amigo por hacer este tutorial yo recién lo ví y lo acabo de terminar el proyecto y me sale bien de como carga mis baterías , gracias amigo , te doy tu like

[@سامیاربهادری-ز5م]

سلام چه طوری درست کردی ان قطعات اسم ش چی هست برادر

[@mariosergioariasalmaguer5452]

Hola me podrías ayudar a terminar mi cargador diciendo que tipo de resistencia utilice y el diodo saludos y disculpa es que me urge

[@TicoMeu-yz1eb]

​@@mariosergioariasalmaguer5452Oi

[@Koko-ou6lm]

Red led for full is not convenient and no auto cut. Charging such a battery using puny diode is not safe because no current limite. So, diode may be over heated and damage. And very bad for battery. Use a 2 ohm 1 watt resistor in series will protect a little.

[@Luismiguel1939]

you should, to improve the understanding of those who see you, make a diagram of the circuit

[@bayufifi8657]

Ini org indo anjing

[@gamingwithsniperhead8322]

Thats correct

[@douffinguessan1129]

Merci pour le travail que vous faites pour nous.

[@glowingrainbow2004]

Mohon dengan hormat, Dalam pembuatan video tutorialnya, diterangkan sedetail mungkin tiap komponen yang dipakai, agar kaum awam seperti saya ini dapat membeli ditoko komponen sesuai petunjuk yang telah diberikan. Terimakasih.

[@maspono8090]

Mungkin orangnya lg sakit gigi.

[@PePDude]

Maaf telat 2 tahun. Bahannya ada • Dioda • Resistor • Kabel • Lampu LED 5Mm • Port/kancing batre • adaptor AC/DC Jika ada pertanyaan bilang saja, saya aktif 🙏🏻

[@riccardoboccali2496]

Nn nõ😊😅v ct ft ci se no no 😅 un se😮 se se​@@maspono8090

[@AHwq-og1sq]

hello tech record, can the circuit be used to charge one battery?

[@erkabaslar]

bu soru mu? dener görürsün

[@antonioant0n67]

bhan pembuatannya siap kan lampu led 2 buah merah sama hijau ,dioda 3 ampre 1 buah ,dioda ziner 9 v 1 buah ,karna mengunakn batrai 2 buah jadi 7,4 volt jangan mengunakan ziner 5volt .harus mengunakan ziner 9volt tingal mengikuti skema diatas saja oc shobat ,slamat mencoba🙏🙏

[@siskaaulia8251]

Maaf bang numpang tanya Vidio itu pake rangkaian seri apa paralel

[@ايمنالفاهوم]

The music you put in your videos is very annoying

[@sopansaja]

yeah, so annoying

[@AHwq-og1sq]

hello friend, I have an advice for you, if you want to make a video without any explanation of what you are doing, then better not to bother yourself doing any video. Why because not is one watching your video is a professional in electronics. You have to consider that some of those are trying to learn electronics, and when you do not do your best in showing an explanatory video with diagrams, then do not bother yourself, either making the video. I hope you understand what I mean.

[@leopoldofernandezjr4441]

You're right brother.

[@AHwq-og1sq]

@@leopoldofernandezjr4441thank you very much

[@शिवरामपतीपुर]

जिनार दौयोड का कोड फुल्ल डायो। ग्राम कम्मपो नेंट के साथ आपका सुबह मंगकामनाएं

[@sudhanshushekharpanda5256]

Very nice. But you don't tell anything about the joining procedures and diods

[@AHwq-og1sq]

Tech record, you are showing a video only , but not a schematic diagram. A video is different than a schematic diagram.

[@filipozis]

Nice. Fine. But what capasitor and what resistor you use in this??

[@asgaraliaga1873]

Abey kon sa diode zenar rasistor kon sa hi bol bad men vedik bana

[@pranabmitra2268]

Register

[@aliask2966]

You changed the direction of the batteries opposite the one you started and did not explain this, some may make mistakes

[@isaacgalvanrodriguez8256]

Es un buen proyecto pero tengo algunas dudas, ¿cuales son los materiales que utilizaste? Y ¿por que cambiaste los resortes de 1 adelante a tener los 2 en el mismo lugar?

[@eliaseinston4715]

Dime y te explico

[@eliaseinston4715]

Los componentes no los dice pero será un zener de 5 voltios, un cable usb cortado de un usb de algún teléfono o algo, un diodo, una resistencia para el Led verde que podría ser menor a 5v o sea piensa que ese Led gasta 2 voltios, pues le añades una resistencia equivalente a 3 voltios. Y lo de la batería pos lo típico, pero podrías hacerlos tú mismo con estaño, cable y aluminio. El estaño para juntar el cable al aluminio y poder cargar las baterías

[@eliaseinston4715]

Pero si lo quieres mejorar te podría hacer un circuito con dos transistores y con dos condensadores para dejar de mandar corriente cuando llegue a la carga máxima

[@losbtssonfeos2580]

​@@eliaseinston4715 cuáles serían el nombre de esos condensadores y transistores para este caso?

[@uncledope77]

Please believe that I'm all for craftsmanship and custom work. But when it comes to 18650 battery charger, they can be ordered & shipped. For as low as $1(US) & that time can be used on other projects. Like the other person said "make a diagram" to show the circuit. For me this is a misuse of time but to each his or her own. I have made custom battery packs regulated to a certain voltage & current. Outside of that it is wise to just buy a charger for a low cost🤔

[@blavloo5554]

Stfu no one asked

[@tekinmoustafa8141]

you can now go into full mass production...to sell them to the french!

[@gopalannp1881]

. Though video is simple a narrative with details of the electronic parts used would have been more useful for viewers

[@ujjwalbiswas4851]

Why didn't you show clearly its connection. It is not CLOSE views. Next try to show closed connection

[@akhilvlogs1425]

Give the diagram plz

[@ALHAMBO]

Damm shit... Why you don't give the diagram asshole...?

[@nelsongallardo4333]

The charger circuit is fine, but you don't put the value of the components or a diagram. the diodes you use i suppose are zener diodes. Could you please send a diagram or at least know the code or data of the diodes?

[@AHwq-og1sq]

1k ohm resistor 5 volt zener 1n4007 instead if 1n5399 diode is not available. I hope I am not mistaken. these components seen in the video.

[@gerardomarino1120]

Excelente Amigó . me podrías decir el valor de cada resistencia de las tres que utilizó gracias se lo agradezco

[@gustavorobledo7310]

hola amigo! yo no tengo muchas esperencia... y ojalá pueda ayudarte! para empezar casi siempre en cualquier proyecto se usa el Diodo 1N4007 y al lado le puso un Diodo Zener... la Resistencia yo vi qe tenia franja o linea de color Marrón/Negro/Rojo es decir qe es de 1000ohmns o 1k es igual

[@sameersalaskar2750]

Khub achha kiya, lekin thoda explain karte to naye logo ko bhi samaj ata

[@alexisrojas640]

How much is the zener diode that you placed in the circuit?

[@ВикторРыбкин-с6в]

Там нет стабилитрона.Я такую схему тоже делал. Там диод. Пойдёт любой а сопротивление чтобы светодиоды неперегорели я ставил на 600 ом. Минимум для одного диода 180 надо но можно и больше лишь бы светился. Меньше 180.нельзя.

[@MetinAksu28]

He connected the batteries in series at first. Then for some reason it switched to parallel connection and never showed it.

[@duchuynh5395]

Tech Record ,how many volts is the power source for charging ?

[@suchitg9115]

Yes, absolutely correct question

[@leonardio.miyt9]

About 5volts

[@Akoegbepeter]

The battery voltage is 7.4 voltage because it’s connected in series and it’s need a 12 voltage charger to reach a maximum voltage of 8.4 volt.

[@AHwq-og1sq]

Do you believe that I am trying to figure out the connections from the video, from the minute 9.33 and so on. but I have a question, are the two leds connected negative to negative and then to the negative of usb cable?

[@Akoegbepeter]

The two positive of the led are connected together but they use different resistors.the green led light is to indicate if there is input power while the red is to indicate the battery power.

[@leopoldofernandezjr4441]

The value of components he used still confidential😊

[@AHwq-og1sq]

hahahahahahahaha

[@leopoldofernandezjr4441]

@@AHwq-og1sq 😅😅

[@Akoegbepeter]

It’s not reliable,he didn’t check the input voltage of the charger

[@kreationarts9]

There is no clarity in what you are actually doing

[@jesusdanielusme4423]

Que pena pero muy regular la explicación en la parte de los leds no das valores de componentes, gracias y bendiciones

[@hansdegroot652]

I dont understand? The zener is for the leds only? Or does it start conducting at about 4.2 volts? How to protect agains over charging and buring down the house?

[@blockchainbantaisikhnatoub3923]

3 diode will make it to 4.23 or 4.25 volts from 5 volts

[@Ing.Andresguerra1909]

Hola brother la verdad se ve muy interesante tu proyecto pero no dices el tipo de diodo rectifidor que utilizas ni las recistencias de cuántos ohms son. Yo lo acabo de ver y me parece muy bueno pero solo hay ese detalle

[@erkabaslar]

pilleri yanlışlıkla ilk önce seri bağlamış sonra düzelterek paralel bağlamişsınız👍

[@subanali7024]

Ye kya h sar lakdi h ya kagj please reply

[@collections937]

It’s just for indication ! No cut off??? Battery will damage after a while

[@amudibmh5689]

Kalo buat youtube, begini harus nya di jelaskan kapasitas masing2 komponen.. bukan cuma passng rekaman video saat kerja saja..🤣🤣

[@tupadrote3848]

Lo mismo pensé. Mira como pega la posición de los resortes al principio del video y después aparece al contrario jejejeje

[@sunaryo1272]

Kok tdk ada penjelasan. Apakah semua orang mengerti? Itu diseri apa pararel. Makanya kalau memberi tutorial yg sejelas jelasnya biar orang mengerti. Memberi penjelasan kpd orang lain, klo orang lain bingung , maka hukumnya berdosa. Niat amal, tetapi dosa yg diterima.

[@Gigachadsimon]

no

[@ayahsadam9817]

Nice sharing

[@mohmad2822]

This is useful, but I will remove the dislike from the video after correcting the title and deleting the word “automatic”, because it is a charger that does not have an automatic disconnection.

[@AHwq-og1sq]

hello friends, I have a question, is there any danger caused from this circuit?

[@blowingchannel4424]

THIS CIRCUIT IS NOT SAFE

[@blockchainbantaisikhnatoub3923]

@@blowingchannel4424 correct it will blow up thebattery

[@blowingchannel4424]

@@blockchainbantaisikhnatoub3923 Yea there's no overcharge protection so the battery will be damaged or it can even explode

[@djalmaamaro2574]

Hola boa tarde muito bom o projeto pode me dizer de quanto volt é esse diodo zener?

[@sweetykhanom6689]

Vc e de onde migo

[@nasserzayyad3095]

الرسم التوضيح للدائره الكهربائيه مع القيم للمقاومات وشكرا❤

[@saddam2772]

ল্যাপটপের চার্জার দিয়ে লিথিয়াম ব্যাটারী চার্জ করবো চার্জ ফুল হয়েছে কি না সেটা জানার কোন সার্কিট আছে কি?

[@juanari2093]

Muy buenas tardes me pueden ayudar con la lista de materiales para crear este proyecto suyo asi como el diagrama de favor para llevar acavo dicho proyecto suyo si no les incomoda mil gracias por su apoyo y tiempo

[@ALHAMBO]

¿Consiguió el diagrama?

[@mohamedahmedzareef8011]

U are in 2021 not in 2020

[@jayenduvora6804]

Pura samaj nahi aata hai circuit diagram dena chahiye

[@محمدطه-ه2ص7ذ]

اختراع بسيط وجميل لكن حضرتك مافيش توضيح بالصوت ليه يعنى مثلا المقاومة كام اوم والدايود المستخدم رقمه كام وكان امبير الرجاء الشرح بالصوت للفهم وشكرا لحضرتك

[@eduardoluisjuillerat3523]

Hola, cambiaste el circuito y no aclaraste ademas seria bueno el listado de componentes.

[@bhupendradesai3402]

Dabbi banana sikhadiya

[@MuhammadHofifi7]

GOOD ❤

[@one-sidegamer5534]

Nice but your video quality is not good so please make a better quality or buy new camera

[@nikhilmore2073]

Ginner diode kitne amp ka use kiya he?

[@AHwq-og1sq]

Hello friend, with regard to the 1n5399 diode, can I use 1n4007 instead? I have plenty of them.

[@leopoldofernandezjr4441]

The uploader cant reply. He doesnt know how to type😊

[@ВикторРыбкин-с6в]

Пойдёт любой диод, он в схеме направляет электричкество в одну сторону.

[@devdaspramanik9581]

Jo chij aap Laga rahe ho Unka Naam to batate Hue jao

[@alltypesvideossociety9432]

Circuit diagram bhi dena chahiye tha q ki video mei clear nhi ho raha

[@apnamultitech786]

Dear, good idea to make things at home with own way. I have needed ur help as u know.thanks a lot

[@evanpenalosa6425]

Not very detailed.... What the value of the parts installed?

[@reginaldocorreia6782]

Vídeo muito bom mais se ele explicasse ficaria show, nesse formato é para já rem uma boa noção de eletrônica

[@kidambikrishnan5027]

You should show clear diagram and components used

[@marvincarpio2714]

Why you didn't put the name of the parts... so vain to watch...

[@syedkashif74]

Bhai app ne suru main serial connection kerah hai aur batt main periall connection no ya hai.

[@AHwq-og1sq]

1k ohm resistor 5 volt zener 1n4007 instead if 1n5399 diode is not available. I hope I am not mistaken. these components seen in the video.

[@sagherykhattak534]

Zener daiwood kitne volt ka hai aur resiston kitne watt ka use kia

[@AHwq-og1sq]

-ve of both leds are connected

[@عليعليي-ص9ظ]

A circuit diagram can be drawn

[@thisguy6883]

How to made it reverse? Or to let the electric out?

[@PRAVDA980]

Ставлю палец вниз,только из-за того,что нет схемы и пояснений.

[@laskarpelangi613]

Itu dioda biasa ukuran brapa? Zener ukuran brapa? Resistor ukuran brapa?

[@djalmaamaro2574]

Hola bom dia muito top o amigo pode me passar o diagrama desse carregador?

[@ВикторЕршов-ъ7ь]

а где схема. и светодиов можно было стачить напильником чтоб невылезали из корпуса

[@jean-lucjla2987]

Un projet à mettre à la poubelle. Charger des batteries avec seulement une diode, c'est prendre des risques. 5 - 0,7 = 4,3 volts et non 4,2 volts. Donc pensez à améliorer votre montage et donnez des valeurs à vos composants. Sinon, acheter un extincteur..

[@BireshUsendi]

Bhai kuchh component ke bare me to background mein likh dete

[@tootkhumalo4764]

Why cant u show the exact names for the tranaisorts u using

[@rusdirusdi7021]

Saya sdh membuatnya tetapi tidak bisa cut on off otomatis semua komponen sama kalau saya membuatnya pakai 3 slot apa harus 2 slot biar dapet otomatisnya.tks.

[@djalmaamaro2574]

Hola boa noite muito bom pode me dizer com quantos voltts elé se desliga?

[@douffinguessan1129]

Oui je veux garder pour toujjuur merci et que le bon Dieu vous guide toujours.

[@isabelmariogodoymoreno5423]

No está siendo claro porque se mira que pones un tipo de terminal al inicio y después aparece otro tipo y el puente entre terminal y terminal lo cual no se observa cuando lo hacen en el vídeo

[@avcablenetwork1792]

I have 1 AAA batterie we can charge 5v charging wire direct... Any problem

[@slhansapodda1489]

Volt 9 battery charger akakuth hadana hati awannako

[@worldofkabir2763]

Can u plz tell us what all components have used ?

[@bhoot1702]

One way Diode, 330 or 680 or more ohms of resistor if you feel heat in led, zenier diode

[@carloszapparelli4074]

Red will be empty and Green Full Charged !!!

[@angelnoheart1167]

..bro, please share what and what aka details of your video..

[@luigielgatto7029]

vedere le batterie con i contatti in serie , poi li saldi in paralllelo , bisogna crederci a quello che fai o prendi le cose per far capire che la gente non vede, fai vedere meglio i lavori

[@Blabzz]

Or just get tp4056 and charge a 18650 cell that way?

[@anilkumarkalva9214]

What is that glue name you are using in the viedo

[@VidarrKerr]

Why are the hands so dirty in all these videos?

[@leopoldofernandezjr4441]

Bec he doesnt know how to wash😅

[@mbahkanjeng3793]

mbok yo nek pengen ngetes LED'e nyala opo ora yo lampu penerangane dipateni toh yo..yo..lak ketok engkukan led pas murup/mati..ngunu yo kok yo cek repot'e

[@miklospery6721]

el vido esta bien pero tiene una gravicima falla , no estan indicados los valores de los componentes

[@Cheese145b]

Who uses that saw?

[@richardjanssens2657]

podrías mandarme la liste de componentes, y el plano de como armar el circuito, soy novato y deberia de aprender como ustedes

[@1islam1]

🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

[@gfb6661]

Just use micro charge socket on eBay cost only a pound ,so eas to use

[@engelscontreras]

Which Zener did you use????

[@joaoalvesdesouza2812]

Favor quando postar vídeo explicar. Pois não entendi nada.nem valor dos componente falou.mostrar tudo que esta fazendo.