Ortur Laser Master 2 - 20W Engraver. Build, Test & Review.

[@russelldicken9930]

That's by far the clearest presentation of the Ortur Master 2 I have yet seen. Mine is on the way so it gives me time to prepare. You include a lot of useful information. Many thanks.

[@DavidALovingMPF102]

Well? Do you like it?

[@Metal_Vistas]

@@DavidALovingMPF102 - I'm wondering that as well.

[@YoungFamily_]

I'm sitting on the edge of my seat in suspense to your review!

[@trippfall]

You got a squad waiting on the feedback bud

[@GroteGlon]

More than a squad now

[@tweddelltrumpet]

I don’t think review videos can get much better than this. Thank you so much!

[@aishaally1634]

Can it cut paper materials?

[@exituscaeli959]

Absolute smash out of the park review and demo. Otur should be paying you. I'd talked myself out of getting this but you answered every preliminary question I had. Now I actually see the NEED for this in my project and it's an entirely different perspective. My budget battles are between 3D printer resin supplies or getting additional hardware. I think I'm sold. This is an investment.

[@Philcoopersworkshop]

One of the best overviews of this I've seen, you covered things that no one else seems to, and I'm looking forward to using mine when it arrives.

[@patrickmaartense7772]

agreed !

[@Philcoopersworkshop]

@@Damian-Church-NZ Yes it did! Very nicely.

[@cedric9776]

Wow, I think this is the most complete and comprehensive review/explanation I've found online, which is of great value for a beginner like me. Thanks so much for that!

[@tillherrmann3431]

The amount of work dedicated to make this video.. that isn't just a review of the ortur laser cutter, but basically a complete guide on how to use one, and a really good aditionally. Thanks for your work, really clean presentation!

[@techydiy]

Glad it was helpful!

[@sp404ex]

The thoroughness of this presentation is impressive. I ordered the "20watt" version based on a first viewing. I appreciate your clarification of input versus cutting power, as well as a live demo of what can be accomplished with this unit. The Ortur is preferable to the similarly priced Chinese K 40 CO2 lasers IMHO because the K 40s, while more powerful, the build quality and included components seem spotty at best, and the the setup is more difficult. Many CO2 lasers tout pass through capability, a feature that would obviously be easy to implement. The easy customization of an extrusion based frame makes it easy to implement changes to expand capabilities. If this proof of concept laser works for me, I will likely order a larger more capable FullSpectrum machine, while retaining this surprising capable machine. Thank you!

[@dertoken]

I just bought an Ortur 15W Master Laser 2 and your video helped me so so much to get it up and running. The best hint was that I have to hold the shift-key when I want to turn on the laser while running along the frame. Many thanks!!

[@shaundowns493]

Without a doubt, the best review of this machine out there. Well done, and loved watching it.

[@techydiy]

Thanks 👍

[@BrandonsHealthJourney]

I absolutely agree. Best video on this machine. I'd be willing to watch a couple more.

[@arnaudmetivier8020]

Thank you so much, guy ! At least a video that treats most of all the materials I could dream to cut and grave, without searching to last and last till the death just to reach unbearable ads. You saved my evening. Best thoughts from Brittany / France

[@ekaterinajameson3841]

Excellent video, Thank you! I used this to set up my unit today and I'm already engraving .

[@russellmatthews595]

Hi what a great find I have spent two days trying to find what software i need to run my brand new ortor just about to give up looking at time wasting u tube rubbish. Then i found yours it answers all my questions how to get started was most important. thank you very much no time wasting, concise and to the point. Thanks so much stay safe.

[@FilterYT]

That was a fantastic review, thank you from a first time viewer.

[@brunosmith6925]

AT LAST... a video that explains everything about this machine. Been looking at many American videos - all are totally unhelpful. Thumbs up.

[@Sky_Nett]

Woah you can engrave clothes! This is a whole new stuff for clothes design!

[@Istocnik777]

Have y tried ?

[@cornpop7805]

Wow, this is the best review of any product I've ever viewed! Your audio is flawless, your descriptions are perfect, the procedure order is excellent.

[@rosiepeng-superwave7210]

contact me, show you something you interested.

[@Qujav]

World needs more reviews like this one :D

[@techydiy]

Clearly you didn't actually watch the video where I explained the difference between input power and optical output power. I find that with stupid people they react without thinking or researching, they act like a dog, see something, react to something, except you can train dogs. Here boy have a dog biscuit and fuck off.

[@Pixel_FX]

This video has to be the most informative video on the whole youtube. No bullshit intros and gibberish. Everything from assembly to usage and control. Awesome video. Subbed.

[@lastorianostra8173]

Master, you did an amazing job for us! thank you!!!!!!!!!!!!!!!!!!!

[@mohanad70]

To say the least, this video is described as creative. I don't need to install my device except watch this great video. Thank you from the heart.

[@ourwaystudio6204]

Now that is what I call a review. Damn good.

[@goharsaed8076]

Price?

[@SensSword]

Got this same laser as a birthday gift from my in-laws. Quite excited to start working with it, and ever grateful for such kind in-laws :-P. In the meantime, great to see these sort of reviews on the KZbins. (commenting for the Al-Gore-ithm)

[@WhiteysWickedWorkshop]

I watched all of the videos on this laser and your Review and attention to detail is by far the best! CHEERS! And Thank you!

[@techydiy]

Thanks

[@theserenemystic]

I ordered mine and decided to look up some videos for a leg up and im so freaking excited. I just got mine for wood but knowing it works so well on other materials like mirrors is opening up so many new ideas for me. Great video and very thorough.

[@rosiepeng-superwave7210]

contact me, show you something you interested.

[@trippfall]

How are you liking it so far?

[@Xelz_28]

This has been a great and thorough review. Thank you. I'm suppose to be starting a new job with this laser so this is very helpful before I actually use it.

[@trippfall]

How has it been for you?

[@HoosierNewman]

Actually found after another brand (lower priced) model popped up in ads. But by far this is the clearest and easiest to understand. The other one could not find any info or videos. So that made me search deeper. The best product representation I've seen. But shipping time could be improved. Standing by /saving for order.

[@reman666]

As usual, brilliant video. no chit chat only relevant info..

[@techydiy]

Thanks

[@williamclark3261]

This review is so good. I think showing the full range of use is the most informative I've seen.

[@k.b.bezdicek9137]

I've been watching your videos for a while now, and have been consistently impressed! You are doing a great job, your production quality is excellent, and you've been a phenomenal help in my journey back into cnc and laser technology. Thank you for everything you do, and keep up the phenomenal work!!!

[@techydiy]

Glad you like them!

[@ghgomez2]

Great video. While searching for tips for a new woodworker, I fell down the rabbit hole in a CNC path which led me to 3D printer that led me to laser printers - I enjoyed every minute of this journey - but you led me out of the hole with your well presented, detailed, presentation and I am ready to jump into the laser medium. I am a retired old man with too much time on my hands and I can't wait to add a laser to my toys. Thank you.

[@techydiy]

Good stuff, have fun.

[@ColdSideOfMyPillow]

Holding Shift while resizing will preserve the aspect ratio of your text/images.

[@SatchelMcQueenVideo]

You should take these comments and use them in your resume for this company. I bet you could easily get hired by them as the new video/PR guy. Sold I’m ordering one next month because of this review.

[@christianstclaire5706]

Kudos Sir, above and beyond.

[@seithji]

One of the best-detailed videos I have seen ..

[@Hatchmade]

Thanks for the great overview, I just bought on and I'm looking forward to trying it out

[@mkoihjkihkkugjufytdy]

Yu recommend?

[@annnnonnymous]

Just came across this review. This was exactly the level of info I needed to make a decision about this engraver. I appreciate your thoroughness!

[@techydiy]

Thanks

[@rosiepeng-superwave7210]

contact me, show you something you interested.

[@melissaruth1000]

Thanks for the video. Would you make a video on how to print a photograph on wood.

[@vladuntaroy9957]

Большое вам спасибо, в вашем видео можно оценить уровень шума работы гравера. А так все очень подробно спасибо за вашу работу.

[@sp404ex]

I was considering a FS Muse system, but I wanted to begin to understand the technology before taking the plunge. When i saw this system a while back I thought it's a toy that could not cut more than paper, and so I stayed away. Buying a K40 type laser did not appeal to me although there is a great deal of information on dealing with that type of systems shortcomings. I'm a design engineer, so the upgrade process didn't scare me from the technical point of view, but I did not want to take on another project of that type at this time. When I found this video, I bought my OLM2 based on this presentation, especially when i learned that it had the capabilities you have shown. Since then, I have been inspired to take the journey, following the learning paths that you linked to. Thank you.

[@Balonk0]

U deserve a olympic medal for this review! Gj sir

[@alpscraftshack599]

One of the best, if not the best video I have seen on this machine. All useful & relevant information. You should give lessons on making these type of videos. There would be so much more useful videos out there then, instead of a lot of the garbage there is now. Keep up the good work.

[@derrickw7253]

Very helpful video. I am not new to laser cutting, but I just got this model and found your video to be more helpful than the user's manual. Thanks!

[@techydiy]

Thanks

[@bbdd345]

Excellent video demonstration and tutorial. Thank you, as you are the first person I actually understood, becuase you didn't miss a step while others assume too much. Your a genious. Thank you

[@dennis954rr01]

Thank you so much for the great video. I muddled through 5 or so USELESS videos before finally finding what I needed and more in this video. Concise and thorough, excellent video!

[@techydiy]

Thanks

[@joseanderson-cuff6491]

Excellent video...enjoyed every second of it, from start to end. Very informative and the latter part of the video opened my eyes to new or potential projects that I could use a machine to execute. Thanks again for spending so much time to give your audience a wonderful, well edited video presentation. Excellent job!

[@techydiy]

Thanks

[@perthmadbloke]

The best Ortur laser video on youtube!! G8 lens is a good upgrade as well

[@techydiy]

Thanks. I have been looking for a G8 lens, I cant seem to find any, I will have to import one I guess.

[@PCPAyLOAD]

Well done! Really makes my apprehensions of buying one go away.

[@ImperialLightandMagic]

Brilliant video, I ordered the 20W last night and this video will be on repeat when I build it!

[@brentpeterson6052]

I have been considering whether to buy one of these or not. You have made the decision much easier! Thanks for the great info.

[@Profoundemu]

This is a great laser, ive done a lot of projects with it. Only thing is that the laser lost significant power and no amount of focusing would work. I upgraded the laser to a 30w and its back at perfect. I recommend using lightburn with it.

[@juanalbertocorniel]

You deserve that we all buy the machine. Brilliant Review

[@ccyblissketch9453]

amazing review man , you simply explain more than those who sell them or the groups. thank you very much

[@techydiy]

Thanks

[@xxchillyxdogxx]

This is SUPER helpful. Definitely have sold me on purchasing it! They should add this video to their websites for sure!

[@timhayden5364]

This is the best instructional video that I have ever seen. Thank you!

[@Vteka]

Kawał dobrej roboty. Dziękuję. Pozdrawiam z Polski

[@eddiethomason_]

Bro, this video just saved my life!!! Thank you!!

[@lightnbreezy6044]

Excellent information, much appreciated. I'm goin to try this, many years ago I did some wood carving, looks like my creativity will be tested here.

[@asdwee4444]

Thank you so much for this video. In the order feedback I recommand your video to all aliexpress buyers who want to buy this cnc laser engraver

[@nevillearnold9087]

What was your experience with Ali express

[@asdwee4444]

@@nevillearnold9087 It was ok.The package arrived in two weeks.(November 2020) I buyed from official Ortur store

[@thomasdehne125]

Great. Because off this Video i could work with the correct settings and be able to become a good engrave on my blanks... Thank you

[@イエンスヨハンセン]

Superb video! Mine arrived today, and i don't think I'd have assembled it as quickly as i did with just the official user manual. Mine appears to be a slightly later version, and there are a couple of new bits not covered in this video, but they are not covered in the manual either. I'm saving this video as a go to reference guide.

[@eddiestephen4353]

Now that is what I would call a review...well done.

[@techydiy]

Thanks

[@gianazzolini5588]

Great Video! I ordered an Ortur Master Nov.10th. Cant wait, I wanted to use it for Christmas items, well will du it next year!!

[@dahlbergt]

Very, very informative and enjoyable! Thank you!

[@y2ksw1]

Best review I have seen so far.

[@dmaher2007]

I have to agree with the previous comments, great review and use, and for people setting up this laser very good detail on the settings. Just subscribed to your channel. Cheers.

[@ellaabboud9794]

Absolutely great review. So clear, so many different materials. So informative!

[@FUBARguy107]

I want to use this to put images on wallets and maybe some wooden objects. I've also thought about dog tags. This video made me very excited to order this same model. I need to move things in my work space to allow for ventilation. Maybe build a cheap table so I have an expendable work space. Edit: When you did the mirror I nearly shat. Then you just kept going! I am ordering this asap

[@nursecarrie]

Great video, thank you! What are the settings you use for the denim engraving?

[@urbannpa]

Great Video! I just ordered an Ortur Master 2 today...this is my reference video.

[@tell7682]

have you got it yet? i just ordered mine last week

[@ramikachucha1395]

Where do you go to order one...?

[@DanielH]

That looks great. I have a co2 laser that works great bet the work table is much smaller

[@jaspervanoosterhout4897]

Really well done! Thanks for this fantastic review! Amazing job! First time looking at your stuff, will stick around!

[@cw4608]

Excellent review and demo of this lasers capabilities. Thank you!

[@danielclarke7549]

Very well done. So thorough. Much appreciated!

[@techydiy]

Glad you enjoyed it!

[@st0mper121]

I love the tricks and everything you are showing in this video. You earned my Subscription expecting mine in under 2 weeks a laser master 2....

[@ryel073]

Plan to make a business like this. but it drives me crazy about the software. Specially that im not an IT a lot of progmam to changed specially the stuff to used for the machine. Looking forward my self to absorb all the information you’ve shared man thank you 🙏

[@captainmimsalot8098]

Where did you find your custom buttons? Also thank you for the great review

[@clintstlaurent4263]

@captain Mimsalot - did you ever find the custom buttons? I'm in the same situation. Author says "Ortur included them in the download" but WHERE?

[@martinkeast9016]

I love your videos very informative and extremely helpful, so hopefully I've just bought one..

[@craig7111]

Thanks for making this video! Super helpful.

[@sheldonkennedy]

Excellent and thorough review. Thank you.

[@lucywilliams7290]

Thank you! This is the most helpful video for this laser!

[@qbitsday3438]

excellent explanation ! Great Demo!

[@qbitsday3438]

Thank you

[@davidmajersky1969]

Mine is coming in soon can't wait to have some fun with it.

[@Roadglide911]

Well how did it go?

[@Tommy6404]

Thank you! I think I am going to get this and using lightburn and use it to cut leather with.

[@tonymontana7786]

Brilliant video, extremely helpful. Could you tell me, is there specific software version I need to download for a Mac? Many thanks.

[@techydiy]

Lightburn has a Mac version. Other people have got it working ok, I have n't tried it though. I think laser web also has a Mac version.

[@felixklages1893]

Fantastic presentation!! Really helpfull, great job! Greetings from Germany

[@hootey66]

How did you come about settings for engraving denim. Thanks for the interesting video.

[@techydiy]

I tried lots of settings until it worked. Watch the latest Ortur video on my channel for some improved settings.

[@kinkaterina]

hello! great video! what are the settings for 6mm plywood and black acrylic???

[@LT72884]

Have you engraved or cut food yet? Mine just showed up. Waiting for the grounding kit to gwt here as well.

[@dannyarcher]

Really good review thanks. I’ve decided against buying one to use to engrave my wood work as it just looks so complicated to use.

[@techydiy]

The same as everything the first time you try it.

[@taylorburton2180]

Towards the end of the video what was the purpose of the compressor, and also the purpose of the rubber and around the laser itself

[@jamiek3199]

Amazing video! Should be the benchmark for KZbin reviews, all useful and informative info with no waffle! Since recording this have you tried cutting and thin metals? Or are you aware otherwise that it doesn't? Thanks

[@techydiy]

Thanks. No it wont cut metal.

[@oakandironcustom58]

What an absolutely fantastic product review. Well done and thank you.

[@rosiepeng-superwave7210]

contact me, show you something you interested.

[@lunakoala5053]

Thanks for verifying I got the right power supply. I really got to label all those.

[@FormerlyKnownAsAndrew]

This video was extremely well done. Thank you.

[@FutureLaugh]

would you be able to make rubber stamps with this laser?

[@theosette8632]

Awesome, very nice quality of video , very professional, nice presentation , waiting your next one

[@techydiy]

Thank you! Cheers!

[@vdsmade]

Super materiał👽👍

[@timffoster]

Concise and very informative. Subscribed.

[@Engineerboy100]

I recognized this voice and finally placed it, the Gico Geco lol :) great video too btw.

[@Polytechnicka]

Excellent video, Thank you!