Tecumseh lawnmower linkage

An overview of the Tecumseh lawnmower linkage configuration.
By Request

[@ohyeah3750]

Finally after watching about 15 videos on Tecumseh linkages, this is the one that I wanted. A big thanks.

[@lencost1]

Thank you Tomsmallengines for making this video. @ 1:18 you showed the bowel nut and both sets of holes. I did not see in the small hole in the bowel nut the first time that I removed, and cleaned the carburetor. The second time around I took just the bowl nut off and cleaned the small hole out with my oxy acetylene tip cleaner. This is now a one pull starting mower!!! Thank you again.

[@MrDanoconnor]

Excellent Close up Video Tom....Sure to help out many guys who (Like we all Have) taken parts off in a hurry without looking or are missing parts. Well done

[@kolenskivoip5361]

I thought I would remember how it went back together but then the link fell completely off the carb. Not only did I not know where it connected anymore, I could even tell which end was which. Thanks for showing me again.

[@Liberallez]

AWESOME!!! I've been trying to figure out how my newly (cheaply) acquired mower should be set up...thank you!!!

[@805ROADKING]

Nice camera work Bud!! Them tecumseh carbs are great, same design since the 50's when they were Lauson!!☺

[@haroldgeorge4222]

A little picture ...a thousand thank yous

[@carnivore10]

Lol..your very welcome. I hope it helped you..

[@2muchspl]

You're doin the lords work with this picture/video😂😂😂. Thanks from Indiana!!!

[@carnivore10]

Lol..yvw

[@wisemjk9813]

Thank you I finally got it fixed next time please show how to put together the complete linkage but anyway thank you so much for doing the video but it would have been better like I said if you would have showed how to put back together the complete linkage thank you

[@PaulHenreid]

Does the Governor shaft from inside the motor move? It looks like it stays horizontal on the outside while the Governor rod moves.

[@edzgarage]

Good video Buddy!

[@stoner4]

Im having a problem , I set this linkage up as it shows , how on earth will my throttle work, the governor controls the rpm sorta right? between me choking it and the trottle operation, that supposed to work with the governor I thought, that spring is loose to the trottle , can you explain this, I thought the choke has to be connected to something besides just closing when you want to shut it off! I had it running full throttle! so the choke should be a bit on the closed side , when the givernor pievce is straight up its not full throttle right? Somrthin g is messed up here on mine , I got it used lawnboy tecumseh V7O 125254F

[@Chooman69]

A great reference video.

[@triggersnipe1]

thanks!!!

[@picklevid]

perfect thank you.

[@hendrikbyker8867]

mower is now running great, now i have beer money to spend

[@vinceking7878]

Erm. Mine is not the same.

[@allprog]

everyone in these videos call the top tube THIS TUBE but never says what its is or is for lol