What $1000 In Lube Looks Like - Rotec, Peeler Forks, Quick Coupler Install | Service Call #63

[@TekamoHD]

Hey everyone!! Support us by buying our merch, exclusive on www.FortisHD.com: tinyurl.com/servicecall63-swag Special thanks to our sponsor Rent1! If you need equipment rentals in the Vancouver or Washington area: Canada: tinyurl.com/servicecall63-rent1ca USA: tinyurl.com/servicecall63-rent1usa Buy the tools you see in this video here and use code THD023 for a discount: tinyurl.com/servicecall63-buytools

[@rp1645]

On the quick change attachment for backhoe buckets. With that Little pin, just asking because it keeps the big pin from rotating, does it ever sheer or break. 😊 Again I'm looking at small long nut type steel versus a HUGE chrome Solid Pin going through the whole Dipper lower frame. I love watching you guys I am a big Nerd on how that does what on heavy equipment. My personal baby is a 1978 Dynahoe 190 I own for fun. I just pulled off one of my front bucket DUMP cylinders. Leaks badly ( Seals) Sense I bought her in 2003 have had to reseal most of the Hydraulic cylinders. Boy talk about HEAVY. I backed my PU as close to the front bucket and ROLLED the loose cylinder into my PU Bed. That old school Dynahoe has that screaming 353 Detroit Diesel. I plug her in for the engine heater And she starts each time I play with her I call her big Musky after BEs biggest Dragline ever built for Ohio coal Company She looks like a big Musky in my back yard. I also own a 8V-71 Detroit Diesel in a 1971 SeaGrave FD Engine another big boy toy I have. Love to have one of you guys drive that Spicer/Dana 5 speed transmission and listen to that Detroit screaming. Music to my ears 😊😊😊 Thank you so much for showing how it's done. Love the $1000 grease job, that looks like fun.

[@rp1645]

I 💕 how you made the quick change trouble shooting for customers so easy and accessible 😊 can FIX an issue with that electrical gear in dirty places easy 😊 You guys ROCK 😊❤😊

[@Hartsock2009]

Why the fuck am I only finding this channel today, like this is like Discovery unhinged. The humor is spot on.

[@TekamoHD]

welcome brother glad youre joining us hahahha

[@PlankwalkinOG]

I found it a while back and said the same shit 😂

[@Failure_Is_An_Option]

Of course the losers like discovery.

[@thelogicalTMZ]

i just found it today, its literally how us in manual labor talk and act lol

[@manuelmontemayor4824]

bro for real

[@devinroberts9157]

This channels videos are one of the reasons I decided to branch out in my own. Just bought my own first truck yesterday and have been working on getting everything mounted up and stocked up. Thanks boys, wish me luck !!

[@TekamoHD]

Right on! Good luck!

[@jamesburch716]

Dude these guys definitely give you motivation to take the step. Bet they're a blast to work with

[@PrairieMechanic]

Good luck dude! Good work ethic and you’ll kill it!

[@chaisutton2153]

Good luck man!

[@jamesthomas9696]

Good luck from Scotland

[@thyserephTV]

My god it’s in fathomably upsetting and aggravating that this channel is under 100k subs. This channel should have well over a million with the kind and such high quality content they’re making us. Props to you guys can’t wait to watch this channel grow big!

[@TekamoHD]

we really appreciate that boss, that's very kind of you. Really appreciate you supporting us!

[@Jayster943]

Best way to spend night shift watching tekamo

[@yok6122]

Please show me

[@EATSLEEPFARM]

I know i sound like a broken record but the quality of stuff you guys are putting out is better then anything on TV or anywhere for that matter. Ive been behind on episodes busy doing EATSLEEPPRAY stuff 😎 but just caught up and i need more!! Awesome stuff from all you guys including behind the scenes. Lets keep this Tekamo train rollin!!!

[@TekamoHD]

Hahahaha you’re a Tekamo legend 🫡 praying since day 1!!! 🤣 we appreciate you

[@EATSLEEPFARM]

⁠@@TekamoHD🤣 you guys rock!!keep kickin a$$ 👊

[@jordanboyd3287]

As a recently red seal licensed truck guy who enjoys learning tips/tricks about all types of equipment/fab work/repairs etc, this is by far the best channel ive come across. Absolutely amazing detail in every video! Always recommending you guys to my wrench buddies lol. Keep up the great content!

[@Graveltrucking]

The guys getting it done. The ginger gorilla being himself as usual 😂

[@gchris1642]

Whoever is editing these needs a raise

[@jessepeck354]

Best way to spend days off, watching other guys working.

[@marky3617]

Makes you appreciate the day off more😂

[@Kenionatus]

I love work. I could watch people doing it for ages.

[@jaseyjase7703]

It’s crazy to me how this channel doesn’t have more subs but some other crappy ones have more. Love their humor, tech know how and playfulness

[@TekamoHD]

We appreciate it man. Sharing our videos on other websites does help 🫡

[@heavywrenchkris]

The quality is getting very slick boys. Love it, keep it up!

[@TekamoHD]

Thank you boss 🫡 that’s very kind

[@TreSneaky]

I don't know a single thing about heavy machinery but these guys hooked me within the 1st minute.

[@Jacob-64]

I'm here for Tyler ,dude's sense of humour is on point and still gets the job done

[@hiramrodriguez4323]

Oilfield memories are coming back watching this.

[@TekamoHD]

is that good or bad lol

[@patrickbeer7865]

This channel is what keeps me inspired being an agricultural mechanic. Hopefully one day we can bring ag to this channel! Love the videos guy they alway turn out awesome!

[@TekamoHD]

What equipment do you work on man!

[@patrickbeer7865]

Case ih equipment from small 60 hp tractor up to our 715 big quad tracks. Tons of combines! Sprayers just about everything that has to do with farming equipment

[@peanuts2105]

Be careful dude. Farm machinery is a killer. If in doubt turn it off, and think how the machine is plotting to kill you

[@Budabaii]

I've never had such a powerful desire to work somewhere. These guys are too much fun.

[@Sacred_Silence]

The way he points at things and calls them by noises tells me that he's a true professional

[@DieselandIron]

Everything about this is great. The editing, the personalities and the reference of an eclipse to explain your alignment issue. Awesome channel guys! Love what you're doing.

[@TekamoHD]

Thanks for the love! We try to make our videos fun and informative.

[@lukemehrtens7205]

Props to the guy fabricating, best weld I’ve ever seen on equipment attachment

[@DylanOlguin-u2c]

We need more videos of Tyler. He is the star of the show.

[@gdadimi149]

This channle is amazing! As a Millwright mechanic, seeing how other fields of mechanics work is really interesting.

[@brendanhay5788]

It's been a while since I heard someone who calls themselves a Millwright. I finished the foundation program locally in 2014 but never looked for a job. I work in a different field nowadays but can't forget some of what I learned.

[@syko7634]

Gotta Love tylor man, by far the most relatable 😂

[@Takabeee]

The videos are well edited. It's better than old TV and has some humor. I'm really happy I found this channel.

[@TekamoHD]

We’re glad you found us! We try to make ‘em fun!

[@NelzonBlaze]

now this is the real show man i love this channel

[@TekamoHD]

thanks boss we appreciate it

[@hoatzen7887]

one of the best youtube channels I've come across.

[@TekamoHD]

Aw f yeah thanks man

[@jesseponce9923]

I thought this was a damn tv show for the first like 10 minutes. You guys are awesome.

[@the_mcmartin]

YT rarely recommends good stuff and after finding this channel today, it's been a good day.

[@gnarlytothemax]

idk shit about heavy machinery but this is so fun to watch.

[@franciscopena26]

This is a new record for me, subscribed at 1:43 into the first video I’ve seen from this channel

[@PlankwalkinOG]

Mann I wanna work for you guys so bad I just love doing stuff like this. Like when he was lining up the H link to the quick attach, reminded me of when I gotta service the extension dipper cylinder, putting it back together leaving one half hanging from the chain hoist and lining up inner and outer dipper arms to slide em right in. Practice makes perfect! Keep the content coming!

[@Nick-xc4fy]

Great content and awesome too see how supportive and patient you are with the younger guys. Often older guys in this industry just shout and expect you to get it right straight away otherwise they loose their shit, but you guys are way better.

[@myinfo3406]

Can't wait for tylor to explain snap on 4 way wrenches 🤷‍♂️

[@TekamoHD]

Have you heard about the snap on 4 way angle wrenches??

[@TYSuggested]

@@TekamoHD Please tell us more!

[@markm0000]

@@TekamoHD I must know!

[@thedaredevil1907]

From what ive heard they are the best ....becuase they have .......FOUR angles crazy

[@nathanpetrohilos]

Its a true 4 way

[@douglasmayherjr.5733]

Great Video. Normally Cam is the funniest, but Tylor and his Pin Cleaning and other comments had me laughing at my lunch break. Thanks for showing your side of the trade.

[@Assault_corgi]

When he stared at the instructions with great intensity and whispers Fuckin woooooords. That is where I lost my shit 😂

[@rossdinius3303]

I FREAKING LOVE THIS KZbin CHANNEL!!!!!😂😂😂

[@TekamoHD]

WE FREAKING LOVE YOU!!!!! 🫡

[@kunobuje542]

Why is this not a Netflix series yet. Salute from Denmark 🇩🇰

[@krisxpytot]

idk have clue who you boys are but this video is golden filled with comedy and i even learned something new for once

[@masonalbanese]

The video production is amazing the editing everything and the crew know what they’re doing and make sure to put extra effort for the video also

[@666Bushwacker666]

i have found the 54'' demo pry bar is great to slide into the center of the track pad is enough to get it to move easily to get those bolts started in the bearing when your just out a little bit.

[@douglasmayherjr.5733]

Just bought some of the Mueller Kueps Tools from Fortis HD, so far so good. Thanks for the discount code.

[@TekamoHD]

Thank you very very very much for supporting us, Douglas. It really does help us out when you buy from Fortis and you let them know you watch Tekamo!

[@sabreoneopeneing]

Rent1 Ditch Witch SK750 Mini Track Loader, its like an hydraulic shovel! Another awesome video guys!

[@asaxander740]

Did some welding a couple of years ago and I must say your fabricator knows how to lay down a nice bead.

[@robbiet8725]

This was an awesome video, love seen the workshop fabrication stuff

[@TekamoHD]

We’ll be implementing a lot more fabrication work. Glad you enjoyed the episode 🫡

[@Pussifer]

first timer here i like whats going on and how yall record and act dont change

[@TekamoHD]

Welcome to our community boss glad you’re here 🫡

[@ForbiddenCloudGaming]

Tyler is who I aspire to be on site, absolute unit of a man with an absolute winner of a sense of humor; call me crude and that's fine, but people like that keep the job interesting, and your abs toned. 😂 EDIT: P.S. The whole crew is actually hilarious, how do you guys even get work done I'd be too busy being floored from laughter!

[@andreranch6161]

Happy Sunday lads

[@TekamoHD]

Same to you!

[@fatbuddycat]

This is a great series! One of our excavators is going to need this action eventually.

[@jeberjaber]

This is a perfect example of the talk that happens on a trade job site all day

[@drewwagner9584]

That paint job looks great.

[@MPerly]

The foreshadowing on Tyler is hilarious

[@Koby4L150]

Love your guys videos ! Im going to take my foundation cource over on here on the island cause of u guys 🤙 hopefully one day ill get the chance to work with my ginger brother 🫵

[@65Lynchy]

Lots of fun... currently on 55t 22m long reach on a barge,no quick hitch,gotta keep changing bucket n breaker...... luckily I've been on the machine fair while,keep.it greased baby 🤘

[@DaequipPremiumAttachments]

Great Video! look forward to working with you guys more!

[@TekamoHD]

For sure guys!! Really appreciate you inviting us to film 🫡

[@Murzerker333]

Damn, from the title I thought this was going to be about Diddy...

[@rihovaher]

Hello! At my workplace, I watched with interest the replacement of the slewing ring bearing of the Komatsu PC 800 excavator. This is also a very big job. A large crane lifted the booms and lifting cylinders and finally lifted the upper part off with the engine. I was a Merlo Roto basket with a forklift to help with this work. Your big and strong bearded man is a real repairman. Good luck to you!

[@poncetrucking3034]

Just started watching, love the long hour videos

[@trith72]

Aw man I thought this was going to be a look into the adult video industry based on the title, but it was still a great watch.

[@theforkliftguy]

Cam’s the man! Great video boys! 🔥

[@TekamoHD]

Thanks Elmer, can’t wait for your videos 🫡🫡

[@Keith-tz2jy]

Great work guys.

[@TekamoHD]

Thank you Keith 🫡

[@johnforster5312]

Carson's back on screen! Woo!

[@deanl2427]

Another awesome video guys! Haha, I love the halo of Cam The Great, helping Tylor through his difficult times of reading instructions, kind of his guiding light........ LOL Hey Tylor, I have a Lazy boy couch. Can you tell me where I can find one of those Casting Couches you were talking about? 🤪 I did a lot of welding on equipment before I moved, and working on getting set up again. I really enjoy and would like to see a lot more fabrication.

[@sweetbabyofdaddywalsh.2104]

You guys should put hidden cameras on Tylor’s truck, that would be pretty entertaining.

[@Francisco-vg2ws]

Cam I hate how rude you are to your apprentice Its so unprofessional.... (Do it again)

[@jasonclark8578]

Awesome content as always

[@TekamoHD]

Thanks Jason we appreciate that 🤙

[@dylanholmes9075]

Rent1 Volvo 340! Love you guys!

[@TekamoHD]

Thanks Dylan you the man 👌

[@DH-.]

Yea this is what I expected a video about lube would be like. 👍

[@dylanmartin57]

Love watching y'all it's too hilarious but so great

[@TekamoHD]

Thank you Dylan we got more episodes coming out 👌

[@sweetbabyofdaddywalsh.2104]

Rent1 Volvo 340! Love you guys! Awesome work! Keep er mooving! - some cow in the Midwest

[@TekamoHD]

Thank you Brett ya legend 🫡

[@sweetbabyofdaddywalsh.2104]

@@TekamoHD you bet! Hoping to work with you guys someday!

[@meeseeks4795]

Saw the title of the video thought it was a Diddy video I was disappointed but found a cool new channel 😂

[@smartiesnestle6679]

Rest in peace, your guys microphones tylers a beast

[@heyimamaker]

This could have been a spinoff show from Gold Rush 😂

[@mikeznel6048]

Rent1 PC238 for sure. Have a brand new one and work and it’s nice.

[@leopard2a797]

8:41 the cartman voice 🤣🤣

[@intensetoxin8298]

POV black dude and your mom killed me lmao

[@sdjhaulinghotshot7935]

Rent1 Cat 390. Tylor's mom must be proud 😂👍

[@AnonYmous-kd9el]

This is the group of guys Id get along with

[@DirtyNara]

From a fellow grease monkey working for a large mining company in Australia keep it up boys!! Love these episodes.

[@TekamoHD]

Hahaha yo the Australian mines are going crazy on recruiting on Instagram Reels and TikTok eh

[@DirtyNara]

Haha yeah all the companies here are screaming for people!@@TekamoHD

[@JohnnySalazar-us8xv]

Rent1 Johnny Deere 345 , Cam should come to Texas for a vid 🗣️love the vids fellas !

[@BerzerkaDurk]

When putting new angular contact bearings in CNC milling machines, I typically pack them in Kluber Isoflex NBU 15, which costs about $500 per kg, so your bucket-o-grease seems a little cheap to me. I guess everything is relative.

[@Lucasholzlein]

Another absolute banger video with the boys the vids are always awesome and never disappoint. And we need more vids with Brandon Tylor and Carson 👍🏼👍🏼👌🏼👌🏼

[@TekamoHD]

Thank you Tim 🫡

[@Lucasholzlein]

@@TekamoHD your welcome guys

[@thesneak281]

Aww you made Wagner style forks for a front end loader. Been around wagners moving logs for awhile. That's a good idea because who the hell makes a Wagner anymore lol. Even the attachment to scrape the bark at the end of the shift to clean the ground.

[@z0mgbananas]

funny how I get off work welding and the second I get home i'm watching HD mechanics do their thing.

[@SlackerU]

I didn't realize that grease only has a 36 month shelf-life. Makes me want to redo my machine.

[@mikecrevier5811]

Love it 🎉, what happened with the wiring on that Deere, left me hanging on that plug and play deal. Great content 👌 as always with the boys

[@luanskrelja232]

Sounds like a normal weekend

[@tofuman2192]

Dunno why but this was kinda badass

[@TekamoHD]

thanks boss

[@devinborges]

Love these videos!

[@TekamoHD]

Glad you like em Devin. Lots more episodes coming

[@kevinbeefchips]

i feel like some tapered pins would seriously help with locating the bolts for the excavator.

[@spencersimpson7805]

Love the vids as always!

[@TekamoHD]

Thanks Spencer!!!! 👌

[@rogerbrandt6678]

12:09 fk man that’s a huge piece of steel, I was strong when I was younger but that may have pushed me to my limit.

[@thekrakensf7077]

More Tylor!

[@gabrielnilo6101]

I am not sure if I am wrong or not (I don't work in this area) but at 12:18 he removes it... ok... but does he applies it again? I do not have any knowledge on this but I think that the spray that he uses is for cleaning and emergencies, not to be used on long periods of work. So, if I am not mistaken, should he have applied graphite-based lubricant before inserting it again?

[@chrischurch4551]

I thought this was a Diddy video until I saw the date.

[@mephInc]

We use grease that's $5k for a 5 gallon bucket where I'm at. Super fancy stuff they use on the space shuttle

[@adenthhorne7963]

Love your tools 🔧 😂😂

[@KingofUrasus]

“Well It’s not your truck it’s my truck and I pay for on the repair bills so I’m gonna go put this hya on onto this over hya.” Lmaoooo

[@N3gativeChill]

I'm so damn mad I found this at 4am northern fuckistan time, I think I've found my other go to watch when big Peg doesn't upload

[@b200324454]

Rent1 Volvo 340 would be pretty sick ngl :)) here’s hoping!! 🤞

[@tjglass123]

Watching in New Zealand and love the content! 🤙

[@TekamoHD]

Right on bro that’s awesome 🤙