Yeah I love the dumbo RC stuff super responsive and crazy long range without any issues or delys
@RydinginStyle723 жыл бұрын
Thanks a million. Solved my issue 😃
@arnaldogonzalez15703 жыл бұрын
mine isint binding, any suggestions
@rcviper66444 жыл бұрын
Thanks for this video!
@alantaylor3533 жыл бұрын
Cheers mate, just what I needed.! 😜
@ItsRCTeng3 жыл бұрын
Cheers 🍻 👍
@RakishRc3 жыл бұрын
Did it glitch a few times? I tested the range and it kept going beyond 300 meters. Only glitches sometimes
@ItsRCTeng3 жыл бұрын
I haven’t tried going that far yet. No glitches yet.
@LeleganceCoral2 жыл бұрын
that steering servo makes me kinda sad .. thanks for the video!
@Jet.trunks Жыл бұрын
Thanks man
@TheflyingkiwiRC3 жыл бұрын
Sweet, that worked. Thanks man.
@tonyynot4843 жыл бұрын
Is it possible to bind a different contoller from the stock receiver of this truck? The stock controller sucks.
@ItsRCTeng3 жыл бұрын
Yeah you can. You will need one of those hobby grade transmitter that can bind and save a bunch of trucks with different receivers. Those transmitter are not cheap. Some are almost the same price as the rc car and that’s just the transmitter alone. You can also get a new radio system like the dumborc radio. They have them in 4ch all the way up to 6ch with built in gyro. It’s like $35 and you can get a bunch of receiver for as little as $9 each. That’s how I am running most of my truck with just 1 controller.
@Z4KG473 жыл бұрын
Thanks!
@aikun83413 жыл бұрын
Thanks bro
@AK-dy9xn Жыл бұрын
Thank you. I thought my handset was broken
@TransAmDrifter Жыл бұрын
Thank You soooo much! The instruction provided by dumborc is dumb.
@xxslylancexx52652 жыл бұрын
Nice video keep going.But is there any qay to do it without the button,cuz when i pressed it it just broke off
@xxslylancexx52652 жыл бұрын
It happened to both my x6f receivers
@ItsRCTeng2 жыл бұрын
you can try using a program card device which should work with any receivers. If that don’t work, then you might have to get a new receiver. I would recommend having a bunch on hand since they are not that expensive. I usually buy 3 at once just to have as backup. 👍
@xxslylancexx52652 жыл бұрын
@@ItsRCTeng ok ill try thx
@xxslylancexx52652 жыл бұрын
@@ItsRCTeng but wait how do i have tp do it
@ItsRCTeng2 жыл бұрын
Oh wait sorry the program card is only for programming the esc. For receivers, you will have to replace it of the the button no longer work. You can try to use a needle to push it but I would just replace it.
@PeasantNo.4713 жыл бұрын
does it work, a x6gyro from the dumbo 6ch to a 4ch from dumbo?dont want to waist money :-) mybe a Mate testeted it out before me?
@ItsRCTeng3 жыл бұрын
Yes the x6fg receiver will work with the x4 transmitter but you won’t have gyro cause the x4 is only 4 channel and you need the 5th or 6th knob on the controller to control gyro. My suggestion is to go with the x6 dumbo transmitter and receiver, this way you have 6 channels and gyro to play with. I got my dumbo x4 before the x6 version came out so now I’m looking to upgrade to the x6 model. But yeah the x6 receiver will work with an x4 transmitter. I’m using the x6f non gyro receiver for all my bashers. 👍
@randudoftwilliamsiii27553 жыл бұрын
Having an issue with my Dumbo X4 and X6 controller and receiver for the Cheetah. I get no steering or throttle response at all from neither. Tried binding them to there respective controllers but I can't tell if the receivers the problem or something further like an eye problem. I need some help.
@ItsRCTeng3 жыл бұрын
Try recalibrating, I have a video on that. Your receiver should light up green when bind. Once that is bind you might have to redo the calibration all over again. It’s always like this when you introduce a new radio system or switch receivers to the esc. Hope this helps 👍
@mosthuggable2 жыл бұрын
Hi I hv a x4 transmitter n a x6f receiver n can't get them to bind..8 push the little button in n it flashes n nothing....Can the receiver be bad???
@ItsRCTeng2 жыл бұрын
Push and hold the button on the receiver with the transmitter right next to it. It has to be close to each other.
@Christian-yx1gs3 жыл бұрын
Thanks
@TheGanjaGod3 ай бұрын
Thank You
@sonofwind342 жыл бұрын
Hi.ı ve another problem.l turn on transmitter and then esc but l ve never heard that double beep on reciever as others .Car can works but not as powerful as before. I tried stock combo reciever and esc for testing motor. No problem. I checked any cable and plug but ı ve never heard transmitter and reciver matching 2 beep sound.l calibrate and reset reciver but nothing change. Do u ve any advice?
@ItsRCTeng2 жыл бұрын
Make sure all your trim knob on the transmitter is turn all the way up to full 100% when you calibrate the esc. I’m not sure why your esc don’t beep but it should. Sounds like it starting to lose its juice and might have to be replaced.
@sonofwind342 жыл бұрын
@@ItsRCTeng Omg.It was broken.??? This 120amp esc is new and motor just 3650 3500kv.
@kevin_perez90882 жыл бұрын
Nice
@Das-Veilchen-X3 жыл бұрын
Thx 🙏🏻
@briansteep22453 жыл бұрын
My receiver has no light,it has less channels,it won’t bind like this..my esc shows a green light for half a second then just flashes red.I do get the 3 beeps...holding the button has done nothing..do all dumbo receivers light up?
@ItsRCTeng3 жыл бұрын
It sounds like you need a new receiver. It’s super cheap and easy to replace. From what I know about dumbo rc radio systems is that all dumbo receivers have 6 channels and they light up. The only differences between the two is one have gyro (x6fg) and the other is non gyro (x6f) they both can be bind to both X4 and X6 transmitter or controller. I have the x4 controller non gyro.
@andi86543 жыл бұрын
Hey there! I just got my Cheetah today and went out for a first run. But I noticed that the steering somehow is reversed, when I'm steering with the transmitter to the left the car steers to the right. What should I do? Pls help
@ItsRCTeng3 жыл бұрын
There’s a steering and throttle reverse switch. Switch the reverse for the steering and that should fix the issue.👍🍻
@andi86543 жыл бұрын
@@ItsRCTeng Ayy thanks 🍻🍻
@nultianeks3 жыл бұрын
Hi! I have a problem. I have reverse steering which is not really a problem but still, I have no reverse most of the times and the lights are always on, so no response to the 3rd channel. What is that? Thnx
@ItsRCTeng3 жыл бұрын
You might want to recalibrate the controller and ESC. The 3rd and 4th channel has to be reprogram on the controller to make it turn off. I’ll make a video later in the future showing how to program the dumbo rc radio.
@nultianeks3 жыл бұрын
@@ItsRCTeng So the lights should be able to turn off? I think the reverse does not work when the EPA isn't high enough. If it is above maybe 50% then I have to push the trigger fully once and only on the second push the reverse works. Is that normal? Thank you!
@ItsRCTeng3 жыл бұрын
Yeah that’s normal to engage reverse with 2 push. Only on Crawlers they have instant reverse and auto drag brake. It’s usually brake before reverse so yeah that’s normal.
@jordanrim3rt982 жыл бұрын
My remote will only connect with the adjustment dials to the receiver but the throttle and turn knob won't do anything
@ItsRCTeng2 жыл бұрын
Check your receiver. Channel 1 plug should be the servo. Channel 2 plug should be throttle. In some case, the plug might be in backwards. Plug it out and turn it around and plug it back in then start the recalibrate step over again.
@anatoliipahas5862 жыл бұрын
hello friend. help please. lost back and forth on Domborc, what can be done
@ItsRCTeng2 жыл бұрын
Calibrate the controller. I have video on that in my playlist.
@nashnazer3 жыл бұрын
Can u bind multiple receivers to tx ? So I be able use one transmitter with multiple cars
@ItsRCTeng3 жыл бұрын
Yes you can. Both of my Cheetah run on 1 controller. I’m planing to bind all my rc to one controller.
@nashnazer3 жыл бұрын
It’s RC Teng how do u do it plz
@ItsRCTeng3 жыл бұрын
Just buy a bunch of receiver that is made for your transmitter then bind them all to the controller. Now you will have 1 controller bind to as much receiver/car you want.
@nashnazer3 жыл бұрын
It’s RC Teng thanks mate 👍
@paulrakis3 жыл бұрын
Nice man. Thanks too easy what car is that ?
@ItsRCTeng3 жыл бұрын
This is the JLB Cheetah 👍🍻
@paulrakis3 жыл бұрын
@@ItsRCTeng wow I heard that thing is really fast. How is it holding up? Any issue with it far as durability
@ItsRCTeng3 жыл бұрын
Yeah it makes 45-48mph stock out of the box with the included 3s battery. It’s even faster when you up the c rating on the lipo. Durability is good enough for me to get another one so now I have both the gen1 and gen2 Cheetah. 👍🍻
@paulrakis3 жыл бұрын
@@ItsRCTeng Nice man. Yeah i always like the cheetah and also some of the ZD racing buggys. I love my kraton EXB and outcast 6S once you go to 1/8 scale 6S theres no going back to lol. But i do wanna get arrma typhon 3S since they are so freaking fast as well.
@raymartcatindig77743 жыл бұрын
Bro! Is that dumborc has gyro? Can i use dumbo rc with gyro on my maximus?
@ItsRCTeng3 жыл бұрын
My dumbo radio is the X4 version. If you get the X6 it comes with a gyro built in to the receiver. The receiver is a x6fg. My receiver is x6f no G. It’s a good radio system and it will definitely make the Maximus handle even better. 👍
@raymartcatindig77743 жыл бұрын
Oh okay. Planning to buy with gyro. Cost around 1,300 to 1,500 pesos or 28-30$. Will the gyro works with the stock servo?
@ItsRCTeng3 жыл бұрын
I think it should because it’s built in the receiver and everything gets plugged into it. I’m planing to get another dumbo radio too with gyro.
@raymartcatindig77743 жыл бұрын
@@ItsRCTeng okay. Planning to buy end of november. If you have yours as early as mine. Pls post for feedbacks.
@cphs07773 жыл бұрын
Can you bind the x6 transmitter with the x6dc receiver?
@ItsRCTeng3 жыл бұрын
You mean x6fg? Yeah you can bind a x6 transmitter to a x6fg or even a x6f receiver. If your controller don’t have channel 5 or 6 nob, you won’t have gyro, but it should be still compatible with any dumbo rc controller. I’m running x6f non gyro on my x4 dumbo controller and it works fine.
@cphs07773 жыл бұрын
@@ItsRCTeng no, the x6dc, the one with the light controller.
@ItsRCTeng3 жыл бұрын
Yeah you can bind the receiver but setup and functions I don’t know. There’s a video of someone showing the setup and functions of the lights just type in “Dumbo rc x6dc”
@cphs07773 жыл бұрын
@@ItsRCTeng I'm planning to use a regular x6 transmitter directly to x6dc receiver, so the motors, servo, etc will connect directly there
@ItsRCTeng3 жыл бұрын
Yeah the binding and normal function should work but setting up the lights function is something I have no clue on. But binding should work.
@edwardniqqa-hanz90994 жыл бұрын
Which one goes to channel 1? Throttle or steering?
@ItsRCTeng4 жыл бұрын
Steering is channel 1. Esc goes to channel 2 which controls throttle.
@edwardniqqa-hanz90994 жыл бұрын
@@ItsRCTeng thanks!
@joegomez44083 жыл бұрын
Is this the same as radiolink
@ItsRCTeng3 жыл бұрын
I don’t know I don’t think so.
@aerolazrul73373 жыл бұрын
Can somebody help me? I had issues with my transmitter, the steering wheel won't work at channel 1. But when i switched to channel 4, 5 & 6, the servo is functioning well. Thank in advance
@ItsRCTeng3 жыл бұрын
If the servo works in other channels then most likely your receiver channel1 is burnt out. You can also try to recalibrate the ESC I have a video on that it’s in the playlist.
@fireskullride4837 Жыл бұрын
Mine doesn’t blink when I press and hold it
@danielmadridmajalca70333 жыл бұрын
What happens if botton broke and also it’s binded when I turn it on but randomly disconnects and starts beeping?
@ItsRCTeng3 жыл бұрын
check channel 2 plug on the receiver and make sure its plugged right way. Try to bind it again from the beginning after checking the plug on channel 2. If you get steering and throttle after its bind, then its not a binding issue. You can also try recalibrating the esc. check my playlist for that video. Its an easy process that helps most of the time unless the plug from the esc to the receiver is burnt out or channel 2 on the receiver can be burnt out as well. Hope that helps.
@danielmadridmajalca70333 жыл бұрын
But he botton for the reciver is broken
@ItsRCTeng3 жыл бұрын
Then you will need a new receiver. They’re only like $8-9 depending on the site.
@danielmadridmajalca70333 жыл бұрын
@@ItsRCTeng does it mater the brand or does it have to be the same
@ItsRCTeng3 жыл бұрын
Not all transmitter or receiver can bind together. You will have to get a receiver that is compatible with your controller. Or, if you have one of those super high tech controller that is like $500 then you can bind to almost any receiver and save it the memory of the controller.
@Humphrey2103 жыл бұрын
I did the same but still no response from controller.....any reason why??
@ItsRCTeng3 жыл бұрын
Is your controller and receiver the same brand? If you are using a different brand controller to bind with a dumbo receiver it will not work. Also, one thing people make mistakes on is plugging in the connection backwards. Unplug it and flip it around and plug it back in. Remember channel 1 is steering and channel 2 is throttle/esc. Give it a try and let me know.
@Humphrey2103 жыл бұрын
It's the same brand, just replaced the receiver.......try both Chanel 1&2, still doesn't work.....Am I missing any steps?? I can see red light keep flashing around ESC. Thanks a lot
@ItsRCTeng3 жыл бұрын
Hummm. I’m not sure 🤔
@johanjacobo3763 жыл бұрын
Can this controller and rc go with a nitro rc ?
@johanjacobo3763 жыл бұрын
Receiver *
@ItsRCTeng3 жыл бұрын
Yeah this dumbo rc radio system can work with nitro setup.
@johanjacobo3763 жыл бұрын
@@ItsRCTeng gear just need to know how to blind them Bc rc has a battery channel and it doesn’t say in the receiver where it should go
@ItsRCTeng3 жыл бұрын
You can reprogram the channels on this controller to power up another unit like a battery or control multiple servos for at same time. The x6fg model controller have up to 6 channels to program. My controller is x4f model only has 4 channels
@johanjacobo3763 жыл бұрын
@@ItsRCTeng do you know a video that can help me on reprogramming
@juangonzalezgarica37473 жыл бұрын
Why does my turn red and green?
@kingofkards11102 жыл бұрын
What I'f ur throttle doesn't work?
@ItsRCTeng2 жыл бұрын
Once bind, recalibrate the esc.
@cameroneshleman48333 жыл бұрын
Mine doesn't have reverse and it just reverses for a split second and I'm very very upset
@ItsRCTeng3 жыл бұрын
You might have to recalibrate the ESC.
@JC-111112 жыл бұрын
Hmmm. Mine won't flash no matter how long I hold it in.
@ItsRCTeng2 жыл бұрын
Sometimes it could be the program button is faulty.
@martij822 жыл бұрын
Won't bind to my traxxas slash velineon system.
@ItsRCTeng2 жыл бұрын
Did you try checking the plugs on the receiver to make sure the plugs are in the right way. Sometimes people plug it in backwards by accident. Also, some brands of rc only works with their own brand of receiver and transmitter. Most after market esc will work with dumbo receiver and transmitter.
@martij822 жыл бұрын
@@ItsRCTeng yea I checked the plugs because I had an old velineon system and it workes with that one. Once that one buned out I bought a new velineon system and it wouldn't work with the new one.
@KevinBaird-r5p Жыл бұрын
Mine won’t blink
@markalsendi28893 жыл бұрын
It’s not working it keeps blinking green and red
@S40TBS3 жыл бұрын
🤣
@danielmadridmajalca70333 жыл бұрын
If any body knows help
@Liviu0032 жыл бұрын
Hi 🤜🤛, I just purchased 'JLB Racing CHEETAH 120A' and I have a little problem, it doesn't brake when I hit backward, ....it only hardly slows down. For example if I set Throttle to 25%-50% backward it doesn't work at all. I did a default calibration for ESC (kzbin.info/www/bejne/n3mYnYSYg9Sle7c) but that didn't solve the problem, also I followed your tutorial (JLB Cheetah - How To Reprogram A HW SC8 RTR 120a ESC!!! Without Using a Program Card/Program device)I manually checked the settings and everything it's ok se it on default, and I change Maximum Brake Force to 75%, and still the same problem. From your experience this is a 100% ESC issue and need to be replaced, or it can also be related to 'Rc Receiver"? . 10X 🤝
@ItsRCTeng2 жыл бұрын
It could be an esc issue. Try to program the brake to 100 and see if that helps. 👍
@Liviu0032 жыл бұрын
@@ItsRCTeng It did not work :(...
@ItsRCTeng2 жыл бұрын
I don’t know then I’m thinking it’s the esc
@Liviu0032 жыл бұрын
@@ItsRCTeng so do I...I'll see if I can solve this with banggood...10x man🤝