Terävä Skrama 240 - Carbon steel 80CrV2 - KNIFE/MACHETE DESTRUCTION TEST - UNTIL IT BREAKS

/ joex8
www.buymeacoffee.com/JOEX
I AM NOT SPONSORED BY VARUSTELEKA!!!! JUST LOVE THE BLADES !!!!
‪@ufprogear‬ ‪@Clawgearcom‬ ‪@varusteleka‬ ‪@VolkswagenMexico‬
www.varusteleka.com
www.varusteleka.com/en/produc...
STEEL: 80CRV2 CARBON STEEL, 59 HRC
MADE IN FINLAND
Total length: 430 mm /16.9"
Weight (knife only): 525 g / 18.50 oz
Blade length: 240 mm / 9.4"
Blade width: 46 mm / 1.8"
Blade thickness: 4.2 mm / 0.17"
Main edge: 34° for chopping
Base edge: 25° for finer work
Steel: Carbon steel 80CrV2, 59 HRC
Grip Molded rubber, rough texture
EXTREME TESTING Terävä Skrama 240 Carbon Steel -
KNIFE TEST - FIRST IMPRESSION - STABBER
BRICK TEST, TIP TEST, TORTURE TEST, CAR STABBING
KNFE REVIEW - FIRST LOOK - DESTROYING - UNBOXING
- DEATHBOXING - BREAKING POINT - KNIFE REVIEW
Shot with a GLOCK 17, 9 mm bullets
SHOT with Assault Rifle STEYR AUG, 5,56 mm
SHOT with SHOTGUN in the car (Stoeger - UBERTI Double Defence shotgun)

[@gerdakodak]

This is what I asked for - and got - for my birthday from my wife. Thanks to you. My entire wish list consists only of knives that you have tested and found to work for you.

[@joex]

u have a nice wife!

[@greygleam]

Best large blade at this price point and leaves much more expensive blades waaay back in the dust... my personal favourite for many years now.!!! I carry this as a light axe (beil) replacement because it has almost same chopping power but is overall more versatile.

[@joex]

yes!

[@androna1919]

Totalment d'acord.

[@ThirdoptionJCSU]

@@joex Which brand and model of a gasmask would you recommend me my friend?

[@budthecyborg4575]

11:08 I was about to say you were being too gentle on the knife with the tip tests, and then you bent it 80 degrees multiple times and it doesn't even take a set. Phenomenal. Top notch knife and testing.

[@joex]

thanks a lot!

[@hightowerTB303]

Amen to that! The Varusteleka boys and girls are proud you and your work hopefully 🍻

[@zoltanvonsomogyi7272]

I have that knife. One time i was swinging at a stump, trying to get a piece of Fatwood from it. I made a glancing blow and almost burried it in my shin! I dont take full-power swings with it anymore, but i do keep it razor sharp. Excelent tool!

[@joex]

many of my replies are deleted by YT , thats weird!

[@Nick-lm5lz]

I want one. And the 80 . Obviously I am not sure if I should get this or a civivi. From what I've heard civivi is unbeatable....that being said a 240 and an 80 would be great for me.

[@joex]

CIVIVI!!!!!

[@Nick-lm5lz]

@@joex always !! !!!!!!!!

[@Big.Daddy.]

Amazing! It still works even when rusty.

[@joex]

yes!

[@Maurice895]

Who's the man who kills blades for fun? who's in the cave with a loaded gun? who keeps the Fanboys on the run? "Marlboro Man" "Marlboro Man", "Marlboro Man"!

[@pms2023]

"Psycho Dad" song, by The Bones.

[@Maurice895]

@@pms2023 😆

[@stevenrobertson6656]

WoW amigo...that was nearly mission impossible. Epic blade 🐝👊👍

[@joex]

it is!

[@evenhand7743]

better than a 300.00 tops knife 👍👍👍👍👍

[@joex]

exactly!

[@simonfoo2235]

Sir , you were a professional destruction artist , totally agree ! 👍👍👍💪💪💪

[@joex]

awesome, thanks bro!

[@adammcguinness9950]

Awesome review Joe. I was chopping wood with my 12” Bowie and had a slip like you did. The knife buried itself in my shin and I had to go to hospital for stitches. I waited for 4 hours but the bleeding wouldn’t stop. The stitches hurt worse than the accident.😂

[@joex]

cool, thanks"

[@kennethkrieb3018]

Excellent video Joe X. Thanks

[@joex]

thanks a lot!

[@pullo5518]

Excellent video Joe, the Scandinavians sure know how to make good blades!

[@joex]

this one yes!

[@rautateemu]

This knife made of Finlad, it’s in Fennoskandia, not Skandinavia 😉

[@joi777]

@@rautateemu yes scandinavia is Norway, Sweden n Denmark. Calling it Norden would be ok as that is Norway, Sweden, Denmark, Finland n Island.

[@thegreyghost2789]

Awesome testing. I was surprised the tip didn't break at the hole. 80CrV2 steel is incredibly tough and the manufacturer seems to have dialed in the heat treat.

[@joex]

awesome, thanks bro!

[@skifskifsky3739]

I have a set for garden, forest, fishing, hunting Terava Skrama 240, Jaakaripuukko 110, Jaakaripuukko 85 Bare Tang. Metal pipes and red cars do not grow in my garden, the nearest forest or river, and I have much less strength) My knives will live a very long life) Thanks for the good movie.

[@joex]

u are welcome!

[@heyarno]

I like how the breaking points look so smooth. And the transition between blade and tang is gradual without stress risers.

[@joex]

yeah, it is a good one!

[@cliffguthrie7530]

Enjoyed - thanks!

[@joex]

u are welcome!

[@John..18]

I used to have this knife, but got rid of it,,, 🤯,, really wishing I hadn't now,, 😢😢,,, fantastic video as usual, 👍👍👍🗡️🗡️

[@joex]

thanks a lot!

[@luciosila2183]

Magnífico trabajo amigo. Sigues siendo mi KZbinr favorito 👍

[@joex]

gracias!

[@russellcharles7839]

By favorite big blade! Finland did a great job! Can get razor sharp easy on my Shapton water stones fast too!

[@joex]

they did!

[@themanuchao]

Hola Joe, ese Terava realmente te hizo trabajar duro! Muchas gracias por compartir!

[@joex]

mucho gusto amigo!

[@cafeqc3793]

you are a barbarian, you killed an indestructible knife 😂

[@user-ge1hz6tk2j]

Jackass is more accurate

[@Maurice895]

@@user-ge1hz6tk2j No, Joe is cool.😎

[@joex]

i know sorry!

[@joex]

whats a "Jackass" porn?

[@BladeWalker77]

That is a knife!

[@joex]

yes!

[@trontitan9496]

WOW SUPER MESSER . GEFÄLLT MIR .

[@joex]

yes!

[@Shits-and-Giggles669]

At 11:35 that could go TERRIBLY wrong. I love your videos, just be careful. ✌️

[@joex]

thanks a lot!

[@Shits-and-Giggles669]

@@joex you’re welcome. I love your videos. I would hate for it all to come to an end do to a punctured jugular. 🤪✌️

[@whatisrealwtf]

Real nice blade for under 120.00 they got the heat treat right this would be one to buy..... thanks Joe

[@joex]

u are welcome!

[@benoittalbot7698]

Such an impressive blade! Stay safe!!

[@joex]

i will, thanks!

[@johnmutton799]

I have had one for years, and still as good! They don't give their soldiers crap knives!

[@joex]

yeah, nice army!

[@dernamewarverfuegbar]

what a fantastic blade!

[@joex]

yes!

[@8626John]

Great knife. Love mine.

[@joex]

cool!

[@hightowerTB303]

Wow, what a performance of the 240 Skrama and action testing, bro! 🍻 The Skrama and also the Jääkäripuukko, love them all, own them all! The handle grip is just awesome! Love the leather sheaths and the hardening of them blades! Perfect balance of hardness and toughness!!! Bro, you have found your bending master! 😂🍻 Greetings to you, amigo and the Varusteleka boys and girls!

[@joex]

awesome, thanks bro!

[@hightowerTB303]

@@joex You‘re welcome, bro 🍻

[@genin69]

Terava knives are amazing

[@joex]

indeed!

[@dbratof1]

Alright my friend !

[@joex]

thanks a lot!

[@alexnemes1232]

You are so funny,you make my day better

[@joex]

glad u like my stuff!

[@ThomasRonnberg]

Awesome!

[@joex]

thanks a lot!

[@jtallday31]

Fine stuff...which I don't do😂 love your content brother. I owe my Skrama 240 purchase to your original review

[@joex]

cool u are not regretting it!

[@ashag2535]

I use an Skrama200 - same steel and handle material, but 4cm shorter blade. Done hard work with it, but never destroy it. But I never done hard work like you with it and also never shoot on it - but now I think I can ;-) nice vid 👍

[@joex]

cool, thanks!

[@Gman1024]

Thank you for taking the time and energy to make this video Joe, especially while hungover. That's on my wants list, such a badazz chopper.

[@joex]

yeah, u do stupid things when u are drunk...

[@LosRiji]

Lieblings Destruction artist

[@joex]

awesome, thanks bro!

[@jonbeck5945]

I’m watching the tip test right now and it’s whipping your ass JoeX! Wow. I’m blown away.

[@joex]

glad u like my style!

[@QuantumPyrite_88.9]

The Skrama alredy had a great reputation and JOE X made it even better . Is the warranty on the Stabby Red car still good? How much do you want for it? Have a *fantastic" Friday and weekend.

[@joex]

thanks a lot!

[@ptrd4111]

Ive been thinking of picking this blade up, think i will now. Couldnt find a good chopper so ive been using a small hatchet

[@joex]

u need this one!

[@JoeyKnifeInnovations]

I have made a 240mm bladed 80crc2 puukko and its really a great chopper. I havent wagged it as hard as you but for wood working it works great. I have fastened the handle piece from the top part of the fishtang through a brass plate with a hammer and glued the construction together thats how it wont come apart.

[@joex]

nice! i should test it!

[@JoeyKnifeInnovations]

@@joex I need this leuku for myself but its not Impossible to make a leuku for you but I wont promise anything. It would be epic to see you beat a leuku I made 😁

[@user-hbx91]

what a good Knife!🗡👍

[@joex]

indeed!

[@roopsk]

Joe x good as always 🤓😎

[@joex]

thanks a lot!

[@marciolprado1]

Amazing! Reliable knife!

[@joex]

indeed!

[@Razor6On3]

I just ordered this blade. Absolutely beast of a knife. I love the innovation of the different grinds and how they harden the center of the blade to 59hrc and the outside is like 54hrc.... I'm really looking forward to this blade.... #Marlboro

[@joex]

awesome! it is fantastic! Marlboro!

[@Ve-suvius]

Tough blade. The blade coming out of the handle is its weak point. That could be taken care by the manufacturer. Maybe the pommel a little wider so it stops the rubber handle from sliding backwards. Or a couple of notches in the tang. But only further on the tang. So it doesn't break at those notches, which tend to happpen when they are right below the blade.

[@joex]

it is!

[@gizmocarr3093]

Great knife for the price!! I bet they are in high demand.👍

[@joex]

i think so too!

[@supernova1976]

Out of stock

[@jeffdowns2146]

Dang good knife

[@joex]

yes!

[@krymz1]

it's shape after it snapped in half, would make a sick "razel"type knife with some grinding and sharpening!

[@joex]

good idea!

[@Stefan-dt5io]

I still wonder the Sissipuuko broke so easy since it is made from the same steel from the same factory, I would expect similar performance

[@joex]

there will be no part 2 !

[@Stefan-dt5io]

@@joex OK, null problemo

[@JuaneDosesII-wj6dd]

You can use a pipe as a cheater bar to bend the knife , leveraging and control

[@joex]

i am not cheating!!

[@michaelwaldeck7081]

If I ever break my Condor bushman parang, I’m getting this for sure

[@joex]

u should!

[@thatchsmash]

Good knife, glad i own. Love to see you torture a Case XX bowie if you can get your hands on one. I believe it may surprise you 💪🏻

[@joex]

cool!

[@vibeslide]

Damn mosquitos!

[@joex]

yeah!

[@cvalswockeh2npc1pya82]

I think well heattreated 80CrV2 resp. L2-steel is very much compareable to 3V if not better.

[@joex]

i think better!"

[@loboibero7512]

Fantástico cuchillo!!! Me encantan todos los Terava, pero el mango FUCK. Supongo que con hacerle unos pasadores con tornillos estaría arreglado, pero no me convence taladrar un cuchillo nuevo. De nuevo gran vídeo. Ya eres un referente amigo. Saludos Arriba España!!!!! 🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸🇪🇸

[@joex]

thanks a lot my lobo!

[@user-kj9yf7qk1v]

Súper machete 👍

[@joex]

indeed!

[@mariaconcepcionrodriguezhe2850]

Mr joe dont you learn the lesson of dylan mulvaney? Beer is very bad... Drink a little wine but dont get drunk❤

[@joex]

ok i will!

[@Cuchillosydemascosas]

Un gran cuchillo. Saludos

[@joex]

gracias amigo!"

[@veshtitsacraftsandtunes4693]

I'd really like to see you do the benchmade puukko//leuku in 3v! Hope someone sends one to watch how long it will take for you to fuck it up

[@joex]

so expensive...

[@lacajamh2985]

Hey Joe. Try the HX Outdoors Mercenary tactical axe. Looks cool but probably won't last.

[@joex]

nope!

[@lucianbrad4291]

Hey Joe, You shouldn't play with knives, especially large ones, while you have a hangover 😂 On the other hand, I tend to do the same from time to time , so I completely understand 😂😂😂 On the knife itself : Skrama IS Badass ... Good steel, good profile - it's the kind of knife that you could take in a fight / combat in a pinch - hands down ...

[@joex]

i know, but who cares! right!

[@quetzalcoatl262]

Verry awesome quality of flex.., cutting and choping knife!! I probably buy one. I had 2x Jakaripukko, but this think is insane, price good. Anyway, what about the BUSSE testing? I've bought one NMSFNO, old production, INFI and better quality, great knife?

[@joex]

delayed because Jerry chickend out! Stickman and this Jerry B. are some cowards!

[@frankmorris2603]

Jagdkommando Joe !

[@joex]

never heard of that club!

[@frankmorris2603]

@@joex Lol.

[@Gedankengeist]

Hi Joe, sehr interessant, daß es am Loch nicht gebrochen ist... top job again, respect! 👍 - Einen Kritikpunkt habe ich heute aber... wenn ich Dir schreibe, passe besser auf dich auf, dann betrifft daß auch deine Knie/ Beine etc., wo Du NICHT hinein stechen/ hacken/ schneiden sollst... 😉 Bis neulich, LG Gedankengeist 👻

[@joex]

danke grüße!

[@ejan8088]

Can't break this shit = JOE X out of shape 😂

[@joex]

yes!

[@waltero3035]

All we could do is cringe whenever Joe X does his destruction tests. Pretty tough knife that one.

[@joex]

indeed!

[@heyarno]

With that long lever the tip should break more easy. It's amazing how much it flexes. With 2 of them, you could build a crossbow.

[@joex]

for sure possible!

[@Stefan-dt5io]

Did you not already test this blade in an older video?

[@joex]

yes i did!

[@ThomasRonnberg]

These are hard not to buy for their price and build.

[@joex]

true!

[@daro4087]

Good job joex👍next test odenwolf m machete similar terrava scrama ?

[@joex]

wolf is still rotting in the woods!

[@joex]

Reini R made a vid"

[@gkhanjriii91-04]

WOW 🔪💪🏼😳

[@joex]

yes!

[@davidneal6920]

What a great blade. And it’s not too big so be easy to Carry on a belt. How many Euro’s do they cost? Great blade design and handle design. 🇦🇹 🇫🇮 🇳🇿

[@joex]

70 Euros!

[@Klartext.Germany-lg9dm]

🎉🎉🎉

[@joex]

thanks a lot!!!!

[@PetrosVideos9]

Test Ka-bar 1249 Kukri

[@joex]

i did one!

[@robertpogorzelski8513]

😎👍

[@joex]

thanks a lot!

[@Anvil-wg2je]

Would you say the Cold Steel black bear bowie is better?

[@joex]

no!

[@dersvenni1976]

Is it possible to change the Tip for example with a Flex or similar ? ... i mean make it more as a for example Crocodile Dundee Knive or similar = sharper edge ??? 🙂🤔😂

[@joex]

a real tip would be cool!

[@daro4087]

Odenwolf machete in d2 steel 90$

[@olxgrabowek-br3xt]

Hello I've got a question for Joe but also other users who had experience with Cold Steel Trail master. What do you think about it, which steel would you choose? (Cpm V3 or Vg1 San Mai III version) or is it overrated and not worth buying? If it is legit from which european website can I buy one which isn't fake?Thanks for any advice, love the channel best regards.

[@olxgrabowek-br3xt]

By Europe I meant EU

[@joex]

Trail M will never happen! sorry!

[@joex]

buy a Skrama!

[@mariaconcepcionrodriguezhe2850]

Lamnia. Cpm3v

[@user-qf1xb9pg6i]

🤝👍✊

[@joex]

thanks!

[@vladdracula7116]

a guats messer, is scho 2x bestellt 😊

[@joex]

cool!

[@budthecyborg4575]

Jerry and Dan may as well retire now.

[@joex]

ok cool!

[@Nepravilniy_Obzorschik_Nozhej]

У меня два таких…

[@joex]

cool!

[@TheDeathOfPassion]

Man i like your video you are fuckin intense man! I've been thinking of buying this knife since it came out In 2016 or something on varusteleka...now I know I will. Just the rust thing bugs me, it would not be practical in the rain forest.

[@joex]

thanks a lot!!!!! it is a must have!

[@user-xy8el7dt4g]

Hi joe bist du ein Österreicher, und lebst du in Österreich?

[@joex]

dont know!

[@user-jy7ik3gp6g]

Wich knife survived?

[@joex]

some!

[@user-jy7ik3gp6g]

@@joex I have a hungarian handmade, 8 mm slepiner steel survival knife.

[@1977aliveandkicking]

The new destructtest got a little complicated for me. One bottle of wine could not quench the new sauce (the last supper), so I had to take a nap. While I was looking further, the second bottle was used up and I dozed off again. Damn Joe, was that destructtest boring or did I drink too much wine? I'm going to watch it again. This time without a thirst quencher. 👍😉

[@joex]

i think u drink too much!!! or too lesss?

[@1977aliveandkicking]

@@joex too much too much

[@marcosrenald6215]

👋👋👋👋👌👌

[@joex]

thanks a lot!

[@JuaneDosesII-wj6dd]

I wish you were my neighbor , oh and did you barf in your mask?

[@joex]

yeah would be cool, no, i ate my vomit! no energy is wasted here!

[@JuaneDosesII-wj6dd]

Yum

[@InLakech_AlaKin]

You're gonna hurt yourself brah

[@joex]

always!

[@DinoNucci]

PizzA

[@Maurice895]

potteD MeAt

[@UcoSalta]

The only reason why it is even half tuff is because it has a straight full thickness profile with a very crappy thick edge. Even then, you babyed it on the car. Your stabs were half hearted and even chopping at the door you werern't going full force. That makes all the difference in how much damage the knife will take. For such a prybar I expected it to be tougher. Pretty crappy knife. There is much better at this price that can actually cut and stab.

[@joex]

but i like ti!

[@BladeWalker77]

For example? Can You suggest a few knives better than the skrama? Thanks.

[@UcoSalta]

@@BladeWalker77 . Sure at near or under prices range, silky nata 240mm, condor moonshiner bowie, cudeman bowie, ontario marine raider bowie. I prefer knives that have a point so the skrama and the silky nata don't cut it. But the nata is a good knife. Any himalayan imports khukuri would work as well.

[@BladeWalker77]

@UcoSalta thanks! I have a Cudeman entresierras, I love fit and finish of Spanish knives.

[@UcoSalta]

@@BladeWalker77 Cudeman seems to have a lot of really nice designs. Boker's Argentine made knives are also very good. But I am biased. 😁

[@flemishlion69]

Sober videos are boring

[@joex]

exactly!

[@flemishlion69]

Next one on magic mushrooms?@@joex

[@donjuanmckenzie4897]

Now you have to do it again in the stainless steel :) lol

[@joex]

not on the market!

[@donjuanmckenzie4897]

weird since i bought one @@joex

[@user-eb9cx8wi8n]

Joe please, tell me which is the strongest fixed blade knife?

[@joex]

WTG ARES

[@user-eb9cx8wi8n]

@@joex i have it! Except ares which one?

[@joex]

APO1S

[@user-eb9cx8wi8n]

@@joex between apo1s and apo1t which one is better and stronger?

[@Maurice895]

Joe X Win's! "Flawless Victory, Fatality"🩸🩸🩸

[@joex]

yes!

[@Porn_Lab]

How many seconds does it take you to break a cast iron anvil?

[@joex]

max 0,2 sec