Teryx 4 Brake Pad Install

today we installed a set of Bruteperformance.com standard brake pads on a 2012 teryx 4. despite being the lowest cost option from BP, they are an HH pad material which provides great brake performance for stock to modified machines.
bruteperforman...

[@Lucky_22317]

What do you recommend for a lubricant, I’m getting ready to do my pads for the first time. & I want to make sure it’s top notch. TIA for any & all info &/or extra tips you may have not mentioned in the video 😊

[@sspadventures9374]

A basic graphite brake lube works best in my experience. In the environments we ride, most if not all that junk gets washed out, but graphite continues to provide some slide even as a dry powder

[@georgetrevino5724]

Thanks from Pasadena TX for sharing your videos.

[@sspadventures9374]

Thanks for watching!

[@codydebaat4533]

Did you bleed the breaks after the pad change?

[@sspadventures9374]

No sir. Press piston in, install pads/caliper, then firlmly apply brake a couple times

[@emery5583]

My brakes still won't tighten

[@bowtiebuilding]

@@emery5583 try flushing the brake fluid?

[@emery5583]

I did. They still won't pump up.

[@bowtiebuilding]

@@emery5583 sounds like you either have a bad master cylinder, a leak or air trapped