Test Fitting 35s on a Tacoma Without Any Additional Trimming

[@Tacomaholic]

Be sure to checkout the Tacomaholics Anonymous Facebook Group! facebook.com/groups/863008420793324/

[@mmunoz5875]

It's going to look sweet!!!! If you don't mind me asking, how much did you pay for one tire with tax and all?

[@Tacomaholic]

@@mmunoz5875 Can't wait! The 1 tire was around 250 shipped through Discount Tire Direct. Funny because that's about 80 less than what a single 33 cost when I got those a few years back.

[@mmunoz5875]

@@Tacomaholic well that's crazy if you ask me, you would think it would cost more🤔🤨🤷‍♂️ Well, it's going to give it a better stands for sure!! I was thinking about 34s but then again, 35s are nice! Lol Have you regeared? If not I hope that's your next mod lol

[@Tacomaholic]

@@mmunoz5875 Lol no regear... yet

[@jubankta1627]

Brother if you think those 33s are boring I’d gladly take them off your hands

[@johncorpuz3325]

No wheel spacers needed ?

[@Tacomaholic]

Nope! My wheels have 3.5" of backspacing though

[@alexandergarcia2447]

Hi, whats the name of wheels, thank you.

[@Tacomaholic]

These are the F5 model from Stealth Custom Series.

[@Michael-xs7rz]

Man I I got the F5's in my garage right now. Cant wait for my Baja Boss tires to get in!

[@nicknorcross2041]

Where did you get the mountain wrap for the truck!

[@Threedaysextension]

Please educate me. So the bigger the wheels the lesser miles/gallon?

[@Tacomaholic]

Less mpgs, more spgs (smiles per gallon), more ground clearance, more footprint.

[@stevenkhan4344]

Why didn’t you turn the front wheels to see if they hit the cab mount or fender?

[@juankipr5104]

🔥

[@ktm250xcw2]

Change the orange

[@TheBeast-hd9bl]

What lift do you have ?

[@Tacomaholic]

Up front is King 2.5" coilovers w/resi + Icon billet UCAs. Rear is King 2.0" w/resi 12" shocks (relocated) with OME Dakar leafsprings.

[@ArkansasOffroad]

How can that 35 (69lbs) with the 19lb wheel both weigh 67lbs?? Very likely going to run a similar setup so doing my homework here. Should be at least 90lbs total??

[@Tacomaholic]

It's bizarre for sure.

[@wyckedan]

You can use a shovel like a lever to lift the tire. It makes it so easy

[@jackk8422]

Take a long bar 36" or so set it under the center of your hub. Role the tire onto the bar. Hold tire with left hand pick up bar with right hand and set on the studs.

[@Tacomaholic]

Might have to try that next time.

[@jackk8422]

Works good. Its how i change dump truck tires.

[@Tacomaholic]

@@jackk8422 I've got a 3-4' pipe that should work perfectly.

[@Mav505_]

What’s the wheels specs? I’ve got BR6s for my 3rd Gen Tacoma in a -12mm offset but I’m unsure about upper control arm clearance with 315/75/16s

[@Tacomaholic]

These are -25mm offset

[@dylanhooper6214]

Regearing?

[@Tacomaholic]

Eventually yes

[@lrlapua8035]

get a set of fiberglass baja fenders and plenty of clearance....

[@cpt_sweettooth]

Dude your commentary is legendary. Love it.

[@XxTjRoGaNxX]

Good choice. Can’t wait to see the full set!

[@westoe]

Looks good. Went easier than expected

[@TreyPerryWx]

was this before or after your 1" body lift?

[@Tacomaholic]

This was before the body lift.

[@merrilldobson7062]

Do you know if stock wheels from a 2006 tundra would fit on a 2020 tacoma

[@Tacomaholic]

It wouldn't surprise me if they fit assuming the lug pattern is the same.

[@Snake_Bite_666]

I love mine! Toyo AT 35x12.50x17 No runs, no drips, no errors.

[@bradleyfallentineee]

Can I buy your old wheels and tires

[@Tacomaholic]

I'm using my wheels with the new tires.

[@wvmontani]

You should have at least tried a lock-to-lock turn of the wheels to see if it they rub while turning. And how did you get 285's on in the first place; I just put new 275's on mine and I have rubbing on a tight turn.

[@Tacomaholic]

For my 285s I trimmed plastic, folded the pinch weld, and did the cab mount chop.

[@wvmontani]

@@Tacomaholic Yeah, but my rubbing is on the inside fender; not the plastic flare (which is factory-olor white, so I'm reluctant to trim it. I just ordered some Chop-Mount plates. We'll see if that helps....

[@kevinmanzano8898]

Hey @Tacomaholic i have a 2006 Toyota tacoma would you know what are the biggest wheels/rims i can get without having to lift the truck or get any mechanical arrangements besides an alignment I hope you see this

[@Tacomaholic]

Hey buddy! If you don't want to cut or trim anything then 265/75R16 is going to be the biggest tire.

[@RetroDude79]

Quick question. I have 2011 stock prerunner, how big can I go without rubbing on stock 17”?

[@Tacomaholic]

Largest tire without needing to trim anything is usually a 265/70 for a 17" wheel.

[@RetroDude79]

Awesome thank you sir!!

[@anthonygiordano3991]

What is the exact size/dimensions of these tires? Thinking of getting these for my ‘03 Tacoma. Why did you settle on the Yokohama Geolanders? Are they loud? Any problems?

[@Tacomaholic]

Here's a useful link for tire sizes: tiresize.com/calculator/ I made a follow-up vid where I go over why I love these tires so much: kzbin.info/www/bejne/jYvaaZhva8eYopo

[@anthonygiordano3991]

@@Tacomaholic - Thanks bud!

[@lp1652]

Love the wheels and tires!!

[@davidholmes4976]

I had 38.5 groundhogs on my old 85 toy. Had to sit like you and use my legs to help lift the tire. Cant wait to see it with tires mounted.

[@kylem3944]

Do a video on reason you went with those tires

[@MORECOFFEE123]

I'm ready to see what it looks like with all four on.

[@Tacomaholic]

My gears are supposed to arrive mid-August and I was initially planning on mounting the 35s a little before then, but now I'm excited to maybe mount them sooner.

[@Scott_69HemiDart]

35's are going to be OUTSTANDING!

[@habitat2371]

Looks like the tire guy scratch your rim putting the tire on.

[@Tacomaholic]

Oh those are from Mother Nature.

[@JDawgBuilds]

Move your caster forward.

[@Tacomaholic]

Already got that maxed.

[@cpt_sweettooth]

Is there anyone out there that did the fender trim on the taco but is running 33s

[@911muscle19]

My fenders were cut when I bought the truck and it has 32s

[@chrisp5937]

I've got a 2007 Tacoma access cab running 285/75/16 with no lift or cab chop and they are also still on the factory rims

[@williamscott185]

I love the 35s, it looks like an absolute unit with the bigger tires

[@sariego9]

Yaaaas this is the way to go! I have the KM3 315/70/17 and have to run spacers with the SPC UCA. You probably won't have to though, but yeah see what the turn radius looks like. I also had to cut the sides AND ends of the cab mount. Next year we go to 37s!!

[@DirtRoad_Chronicles]

How do you take care of the odometer and speedometer issue when getting bigger tires?? That’s really my biggest concern with dealing with the dealer servicing and all that how do you keep the odometer correct??

[@EeyoreTheDope]

Have you had any problems with the bed rail cracking from the tire?

[@Tacomaholic]

None at all

[@ej1siktc]

Are you on a 3" of lift or more?

[@Tacomaholic]

3" up front and 4" in the back.

[@ohios27]

Wow looks so good. I love the sidewall on the geolanders too.

[@Tacomaholic]

Nice and beefy!

[@hungrybear1]

35 wheels and tires look fantastic! Love the aggressive/beefy look lol

[@douglansburg4545]

Bigger is always better, my next tacoma will get 5.29s and 34 10.50 on regrettably 17 inch wheels

[@russellbrown1068]

Except, of course when we’re talking carburettors and pussy.

[@Lochsa89]

Have you regeared it or upgraded axles?

[@Tacomaholic]

Stock gears for now but I've got some on order.

[@PotentialDifference1]

Making me want to get 35s! Also love your channel dude! Subscribed with notification.. Stay cool and Keep on trucking my friend 🍻

[@Tacomaholic]

Thanks for the sub!

[@glennstock4573]

Curious, what is the size of wood (length, width, height) you used to lift the front end with the jack?

[@Tacomaholic]

Lol just a 4x4. Works great when the skid plate is on the truck.

[@westerncoloradowheeling]

Looking forward to more videos, I am saving up to do a 6” with 35s on my second gen.

[@sanchezzz1]

It's going to look and wheel fantastic!

[@jp2246]

Love those wheels 👍

[@MarkfromArizona]

Lol, love the 35 inch. Also I laughed at your little comments that maybe a adult would only get. It's looking good 👍

[@odevious8081]

The only problem I have with my 2019 Tacoma is the throttle response lol it lags so much

[@marzbound]

Pedal commander my guy.

[@drunkenmonkey_le5697]

I’m riding my 06’ taco on 35’s with six” lift. Love the look and rides well. Tight turns rubs on the sway bar, I would need the wheel adapters for the future. That heavy breathing thou. Lmao!! These tires are heavy and a bit of a pain in the bit to fit them in. Great video!

[@garettjohnson2234]

I know you commented a while back, but what is needed to lift the tacoma 6" other than the lift kit?

[@state48overland]

Cutting the 2” off the flare is the easy part right? It’s when you cut the 2” on the metal fender underneath you will have some choice words. Also. Think about how to anchor those flares. The fender clips and cheap plastic housing around them will eventually fail from wind drag and full stuff. If you cut the rear beside the same. Think about making some bedside support brackets and lock them flares down. I’ll send picks of my truck. Dm you on TW tomorrow for how I sorted mine.

[@yamaFC]

id like to see as well!! i actually sold my 35s because of this and i haven’t totally given up on the idea. just need the right guidance

[@justingalvan4050]

Hugo Leapz there's write ups on tacoma world already. Best thing in my opinion is 2" on the metal and 1.5-2" on the flares

[@Mon.M0TIVATION]

I think you are gunna need more lift, to fit 35s with zero rubbing I needed about 6 inches of lift.

[@Tacomaholic]

It's doable with 3" with some strategic trimming, hammering and cursing.

[@Mon.M0TIVATION]

@@Tacomaholic The firewall? 🤠

[@justingalvan4050]

deafn Ive ran 37s on 3". Just needs massaging

[@Tacomaholic]

@@justingalvan4050 Massaging with a BFH 😀

[@justingalvan4050]

Tacomaholic your truck is going to question what it did wrong trust me😂. She can handle it though

[@oldterm6978]

Looks great, a bit of trimming. If you remove front shock (using jack stands for frame then use hydraulic jack to raise your a- arm, it would show you all the rub possibilities) you could check full range of travel. I hear a re-gear and supercharger in the works?

[@javiercaballero3182]

man i like those rims what are those

[@Tacomaholic]

Stealth Custom Series F5 in the dark bronze 👍

[@HumanBean520]

Thought about trying this on my regular cab with my Jeep’a 35 😂😅

[@Musky0503]

35 better than 33's

[@devildoc6749]

looking sweet. I would like some insight and opinion on a few items that i have been wanting to do. I was trying to find a message board to send the inquires but i guess this will do for now. The stock fenders on the side above the tires, are small but decent looking. I went the easy route and Spray Dipped it to black, My down fall is that its not shinny, but for the first time, it looks ok. I am not looking for huge fenders, because I have 265 -65 -17 Cooper. I know now that I wanted to get a bigger size and dealing with the side fenders, they match or look in proportion. If I were to put something like yours, It would look out of place. I wanted to find a fender that is maybe about the same size as the truck or a size bigger. Can you offer some suggestions and do you have a video on how to change the fenders from stock to a different size?

[@Tacomaholic]

The only thing I've seen is the +2 or +4 (or wider) fiberglass complete fender replacements.

[@user-cl2es9iu1j]

I love them. Have you regeared?

[@Tacomaholic]

I've got them on order. 👍

[@Dex8357]

Interested in seeing how your tacoma drives with out a regear. That light SCS wheel really helps knocks some weight off My tires are dead, and now is the time to buy tires it’s getting unsafe. So now may be the time to step up to 35s.

[@mrgmc6314]

Every truck should come 35s or larger stock in 4x4 configurations... In 2wd idk .....

[@scooter041031]

Time for some gears. The tire weight is also further away from the center of the wheel so that weight even if it is the same will play a roll in accel and braking.

[@kcassidy90]

I want 35’s I have 31’s now

[@nickbarry7381]

Me reading the video title knowing they won't fit....

[@Tacomaholic]

😀

[@ericfike1861]

35s = 3.5 mpg... Long-travel and new fenders come next...

[@Tacomaholic]

3.5mpg but 98.7 spg (smiles per gallon)

[@michaeloloughlinsr.7809]

I have a 17 taco Pro model in cement I guess be FGK2 hours 33’s all around I’m gonna go with 35s for the tires were out at about 80,000 miles also can you send a link of where you got the camper top I live here on the big Island and I was gonna buy a trailer and camp with that with that camper top and some pads in the back and sleeping bags is good enough and put my dog outside underneath and he watch everybody at night so my goalMy goal is to camp at every park on the island and there’s hundreds of them the big Island Hawaii is quite an adventure it’s a great place to 4 Wheel and Landon on the beach I’m retired so that’s what I do fish will pigs goats sheep cows donkey cars are all wild open season on everything Mahalo bra

[@Tacomaholic]

I actually got my Bestop used locally.

[@nsbtacoma6650]

Dude I have problems getting the 35’s on all the time. Easiest way I’ve found is to put the end of a plank underneath the tire and lift on the opposite end

[@CashW.C]

Those 35s are gonna look real good. Question though??? When can us Kenny Chesney fans expect to see you back in concert?

[@Tacomaholic]

😅

[@MooseDitty17]

That's hilarious. You had it supported by the axle, why would lowering it cause the suspension to compress? 🤣

[@ericnealfishing4118]

You just threw your transmission shift points off and now you will need to re gear. This this is the death of most drive trains.

[@shawncarter5619]

Why? Kills what little mileage you have, wreaks havock on your gearing...not a great idea

[@jeffraymma2]

Good luck off road. Those will definitely rub when you hit full lock and at max flex. Been there. And it sucked. I don’t think 35s are made for mid travel. Cool video tho.

[@Tacomaholic]

That's where the trimming and hammering comes into play

[@ronaldbeck8689]

Ahhh why, doesn’t need 35s

[@edgarmoreno3748]

Save up some money for changing your Gears on your rear end☹️👨🏻‍🔧🤦🏻‍♂️

[@Tacomaholic]

Already got those on the way for front and back. 👍

[@garylund5834]

Just order a Bronco, no fuss no muss

[@guambomb671]

😁😁😁😁😁😁😁🤙🏼