Testing a MANUAL GPU Overclock VS. NVIDIA *NEW* AUTO-TUNING

[@Xilly]

Hey everyone, we just released OVERCLOCKING SERVICES in my Discord server, if you're interested in a GPU overclock (proper one) or any other overclock join my Discord and head to the Overclocking-Services text channel: dsc.gg/xilly

[@CroissantDestroyer9]

bro says his 3090 is trash when its reaching 80C even do thats completly fine and plays at 1080p when the 3090 is recommended to play at 1440p or 4k💀

[@fede9328]

80 degrees on 1920x1080 in a 3090? i dont think thats good, 3090 is a bad card because it consumes a lot of power

[@CroissantDestroyer9]

@@fede9328 good point but his airflow could be relatively bad and he has almost 300 fps in that benchmark a gpu also doesnt like that even a card from the 40 series could get does temps and still if you overclock 80C is completly fine most gpus get to that temp if overclocked or a few cards who are older than 2 years

[@thraxberserker9960]

80c on 1080p is TERRIBLE for a card made for 4k gaming

[@tubelesstrippin]

He prolly got a shitt cooling situation and font forget he is overclocking a power hungry card it's gonna run hot

[@PhantomlyReaper]

​@@thraxberserker9960You have no clue how GPUs work.

[@lofigamervibes]

With MSI I was using 125/1165 OC... So I tried the auto and my 4090 tuned to 165mhz for core, and like you said only 200mhz for memory... So I just went back to MSI and upped my core from 125 to 165, but stuck with my 1165mhz boost for memory. It's been stable so far for a few weeks.

[@naid3947]

I have an MSI too and i have a problem: Every time I restart my laptop I have to re-activate the automatic tuning? it is always activated, but it is not overclocked when I use it the next day, I have to wait for it to do the check of my laptop every day and it is very annoying.

[@humansmene]

running an laptop with an RTX 3050 the nvidia tuning gave me an oc of +50 on both core and mem. BUT manual tuning on afterburner gave me a +120 on core and +670 on mem

[@obsessed2247]

good to hear brother

[@MiracleSpotify]

Is this safe, should I be concerned for long Term use?

[@humansmene]

@@MiracleSpotify no. Because you are not modifying the voltage, only the core clocks.

[@humansmene]

I mean you shouldn't be concerned, it's safe

[@MiracleSpotify]

@@humansmene thanks for informing! I will use this feature

[@bcknight727]

Nvidia Ge Force has had this for years in Alt Z performance overlay, never could tell any difference with auto tune and GeForce causes lag itself, only good if you’re a streamer.

[@zushikatetomotoshift1575]

It's really not the same.

[@sethyboi0715]

i heard they are shutting down nvid geforce and using the nvidia app from now on

[@obsessed2247]

usually my 3060 can push 225+ on the core but cod crashes at 190+

[@ToddHillerich]

I was crashing like crazy since I built this pc so I had to figure out why and tested everything to conclude that my ram was in the wrong slots. I'm using 2 of the same kits same speed just different capacity. There lots of blogs that mention mixing DDR4 but very few mention that the higher capacity should go in the A slots with the lower in the B slots. Before doing this I couldn't even get windows or game to be stable even on the lowest speed let alone use xmp. I tried everything from cpu resetting to reinstall windows and even undervolting my cpu in bios. Nothing beside having the ram in the proper slots made any difference. Windows would crash on boot after login and even let me load a a game just to crash a minute or two into the session. The rule of thumb I absorbed is single the proper placement of the ram in the proper slots are absolutely imperative to even use any auto overclocking tool. After this I was able to auto tune the GPU which landed me +88mhz. I assume it's possible to manually overclock to get higher speed but considering it doesn't void warranty makes it a bit more of a solution for many users.

[@Moymoy-25]

Over clock your CPU too

[@itsgunship1629]

4070 super +200 core +1050 mem 74-75c under load, stable for now lol

[@ImJusSha]

the overclock seems fine but the fan curve is odd sometimes spins fast for no reason

[@michaelrobinson9643]

I'd like to know if you can undervolt, and then use the auto-OC perhaps? It does the harder work of testing.

[@knislleh]

Crashed my system too.. Lastest nvidia drivers, RTX 3080

[@Gaetan.N]

Very interesting video! I have tested with the nvidia app and for a free stuff it’s decently good. Once you made the manual overclock , How do you close msi afterburner and keep the overclock like you advised on another video?

[@Xilly]

Turn on Windows logo button in Afterburner, it applies it on startup from then on forward

[@ManongBoompi]

What is the ideal fan speed target for nvidia GeForce 1650

[@zushikatetomotoshift1575]

Also I hope you set the the clocks to stock before doing the AI overclock.

[@zushikatetomotoshift1575]

Why did you overvolt the gpu to 100% you are crazy. First you don't want to raise the voltage bar you never really need to mess with. I recommend not touching the voltage. I recommend undervolting by 10% Good way to fry your gpu by sliding the voltage bar that much.

[@Xilly]

You don't know how to undervolt or overclock using MSI Afterburner, go rewatch the video and go rewatch what happened to my voltage when I applied my profile, you don't know what the core voltage slider does...

[@zushikatetomotoshift1575]

@@Xilly I know how it works and I still don't recommend doing it unless you don't care about the lifespan. PS I been into the heavy overclocking scene. If you are using something called liquid nitrogen then you would need to set the voltages. Go and talk to a couple of youtube techies and you will see. I am trying to save people money. A

[@zushikatetomotoshift1575]

@@Xilly You can still overclock without messing with voltages. Tip when you have to start messing with voltages then your gpu is near the med or end of it's life cycle.

[@Samer_Design]

agree

[@Silent_523]

You are so very lost brother & should not be advising anyone on overclocking. The voltage slider in afterburner is extremely locked down by AIB/Nvidia and won't actually allow you to set it to any damaging amount. With regards to being beneficial or not.... its dependant on a case by case basis. To check if additional voltage will help boost performance Open GPU-Z and check the perfcap reason under the sensors tab - if it displays: "vRel" increase the voltage slider. "Pwr" increase the power limit % "Thrm" increase fan speed or reduce voltage slider TL;DR this guy knows nothing and the voltage slider won't affect your card in any MEANINGFUL way except, at worst - higher temps & potentially (if it was vRel limited) higher performance.

[@RT-oc6iu]

your voltage is on maximum?

[@CroissantDestroyer9]

thats just dumb it only works if you have youre cores at default and with the overclock it will be unstable

[@TewwTone]

My pc started running lower fps and stuttering after trying the Nvidia oc setting. Is it anyway I can fix this!?

[@nikruhvh]

turn it off?😂 pretty self explanatory no?

[@percafterperc2000]

Great video bro

[@NagoyaRR]

My Undervolt is better than anything the Nvidia App could come up with

[@darkizofficial]

260 fps and 80c is garbage? bro is buggin :D

[@gokugaming21]

can you give me link to your xilly os?

[@TheKeebGuy]

u gotta pay

[@gokugaming21]

@@TheKeebGuy oh I broke

[@TheKeebGuy]

@@gokugaming21 wdyum

[@gokugaming21]

@@TheKeebGuy I don't have any money I just wanted to know about it or like a preview

[@TheKeebGuy]

@@gokugaming21 Its the best i would rec

[@ChadComputers]

Are you interested in doing an affiliate partnership? We sell gaming laptops, and you do gaming optimization videos, so it might be a good fit. I've emailed you with some details.

[@SamkoKalajdzini]

bro wtf is wrong with you using one word subtitles instead of having the whole ass sentance on screen thats retairded

[@clutchyclutch263]

afterburner is better you can set fan temp to never exceed high temp

[@Anicrad]

you can set that in nvidia app aswell lol

[@Fabiaaas]

nvidias "new" overclock aint new 😭shit was already here on geforce experience

[@NotDenisss]

apex legends optimization plsss

[@SlaxFS]

ily

[@gerardgauthier4876]

How to make the most annoying video. Try flashing words as you speak.

[@nerfmyaim]

w

[@Crextures]

I TWEAK BETTER BUDDY