Testing EVERY Mod on the KBD67 Lite R3!

[@tehdiii]

Your videos seem to cover my exact needs. Your few videos have covered all the research I've been doing, and honestly, with this level of editing and production quality, you deserve a lot more than 400 subs. I've been looking around for building my second keeb and I originally wanted to try out some nk creams. After I watched your review though, I ended up going for the alpacas. Thanks!

[@coleydotmp4]

^^^ This guy knows what's up! Seriously, thank you for the kind words. I don't intend to slow down any time soon, just bought a new tripod for overhead shots and better b-roll, so i'm really excited for what I have coming. I'd also like to start streaming builds, if that's something you all would be interested in. ps - great call on those alpacas, you'll love em

[@MatthewEncina]

That final sound 👌🏽

[@jaredj5ca500]

Oh maaannn that final sound test is beautiful!! Really great job here. I think I'm gonna open mine up tonight and follow suit re PE foam and Tape modding at least.

[@averageuser4669]

i just received my kbd67 lite r4 and was looking for videos on which mods to do on it!! it's my first ever custom keyboard so i'm a little nervous and want to make it as good as can be. this video was super helpful and you're so funny and insightful! thanks for the amazing video and can't wait to see future content!

[@FinnTecKeyboards]

Super video! Can’t wait for this channel to blow up! This was like 10,000 times more helpful than anything on KZbin! I hate it when KZbinrs make a board and just stop at mediocre sound, you have the board sounding great! Subbed btw

[@coleydotmp4]

Means a ton coming from you, i love your keeb videos!!!

[@KuritsuAkira]

This is honestly a great look at just about every major mod I’ve heard of, and your other videos are also all really well done. Imo you deserve way more subs and views for this kind of effort and editing. Can’t wait to see where you go in the future of content creation for keebs, keep up the awesome work 👍

[@coleydotmp4]

Wow, thanks so much! Yeah - tbh with youtube I think if i keep cranking along, it will exponentially grow. I have so many awesome videos planned, so i hope you stick around! :)

[@FredrikAuestad]

Thank you for this awesome and detailed vid! Definitely will try some of these mods on my board. Good job, keep 'em coming.

[@coleydotmp4]

Thank you Fredrik! I plan to :)

[@turaturoe6453]

i hope your vids blow up because it's really great and very easy to understand even for newbies, thank you

[@evanllewellyn]

Am trying tape mod because of you, thank you so much (I am subbed with notis now :)

[@Lemjj]

I've been trying to look for mods that can make the kbd67 lite thock yet remove the muted sound from the board. This was the perfect video for it. Tysm for making this video :)

[@coleydotmp4]

You are so welcome!

[@boggieman5082]

This is gonna be epic, can’t wait!

[@tileychannel]

This video was definitely worth the wait :D will be trying some of these for my own 67lite

[@coleydotmp4]

Thank you so much for your patience!!

[@_solid__]

Thanks for doing all this, keep up the great work!

[@elevator-_-6083]

Good video over all, but if I were you I would take out the pe foam and the NOICO and only use the kbd fans foam to preserve more of the pleasing clack of the NK creams Idk just my thoughts Anyway very well put together I like the editing, and gl w KZbin algorithm:)

[@coleydotmp4]

Great suggestion. I'm definitely debating taking out the noico, as im not sure how necessary it is. I do like the heft it gives the board though! But thank you - praying the algorithm sweeps me off my feet hahaha

[@recon12803]

This was a great video, will be doing pe foam, tape maybe gasket, one thing I would change about you video is to include a section that includes all the different mods one after each other. Personally I'm able to differentiate sounds better when I don't need to go back to certain sections and the sounds are continuous

[@coleydotmp4]

Awesome feedback! I'm actually editing my Bakeneko review to be like that :)

[@sn95chuy89]

I normally don’t give video a like but this is one of the few that were music to my ear and deserved a like

[@sebsaint]

I'd probably need a jug of coffee just to start doing these mods! Great vid! The easiest and most effective mod I did was to click on that sub tab!😊

[@coleydotmp4]

Haha i know, i probably took the 67lite apart like 10 times to make this video. Worth it though i love the sound I ended on :) Thanks for subbing

[@dorito2607]

Great quality videos, I love it! This video will definitely blow up

[@coleydotmp4]

Appreciate it! I hope you're right ;)

[@CaviteTechnology]

Currently binge watching your vids, the KBD67 Lite sounds really nice after you modded it! Kudos :)

[@_astroandy_]

You're so cool! This was exactly the video I was looking for. Thank you so much!

[@clovercapstech7442]

nice! this channel is so nice. Thank you so much!

[@wobix_real]

I have come from your kbd67 thocciest keyboard, and just want to say, you are an amazing youtuber, and you deserve a lot more likes and subs

[@coleydotmp4]

That means the most

[@algaez8809]

I've seen many modding vids and never really wanted to change the gaskets out but I am so tempted to plan to do that. Will save this vid for when I get all my parts tysm!

[@SuperPizzaBear]

YESSS THIS VIDEO IS RIGHT UP MY ALLEY? SO GOOD

[@coleydotmp4]

YOOO HOMIE WITH THE MARLO PFP

[@SuperPizzaBear]

@@coleydotmp4 YEAH MAN HE'S SUCH A GUY

[@ThockyDocKey]

Great content! Keep it up!

[@faisalee]

Love this! exactly what I was looking for :) Subbed!

[@Hirotara]

I always make sure that for a budget board that the mods used in your video are utilized. Something a bit more than that doesn't need it but for budget boards, it really is needed to compete.

[@JuanPassiveMenis]

That spacebar with pe foam would get me out of bed every morning just so I can tap it. Excellent job on the stabs, me like.

[@kav9533]

i’ve been waiting!

[@coleydotmp4]

Thank you for your patience! I have SO many videos in the works for this channel, and I've been a busy bee IRL so i really appreciate you sticking around, Kav.

[@monke9386]

Who hasnt

[@kav9533]

it’s hard to be patient but if im getting a way to make my kbd67 better i can wait :)

[@lindis8030]

Ooh thank you for this! I'll give it a try for my KBD67

[@coleydotmp4]

Good luck modding :)

[@lindis8030]

@@coleydotmp4 Thank youu! 👋

[@lindis8030]

@@coleydotmp4 I've done it! My 67LR3 sounds and actually feels better now. The only mods I did was tempest mod and I removed the pcb foam included and replaced it with a thicker PE foam. I already replaced the kbdfans included stabs with some durock v2s smokeys. The last thing I did is I added some strips from stabilizer foam into the plates that come in contact with silicon nubs (still stiff but the removable of the silicone dampener actually added some more flex). Overall, acoustic wise, the tempest mod and the removable of the muting silicone really shone light to my C3 tangerines. It still thoc but the thoc is not the muted kind of thoc. Thanks again for the in depth review of the mods you did!

[@coleydotmp4]

@@lindis8030 Wow! You went all in. I'm so happy to hear that this video helped you. Enjoy your kickass board :)

[@lindis8030]

@@coleydotmp4 I will, thank you!!! You too! 👋😄

[@parks9459]

first of all, veri gud vidyeo seconf of all, dam that board sounds nice third of all, ur content is better than switch and click's imo fourth of all, when discrod server fifth of all, have gud day sixth of all, ur underrated seventh of all, i forgor eighth of all, keep it up bc i always get excited when u upload :D

[@coleydotmp4]

You missed it yesterday was a party in the bix server!!!

[@parks9459]

@@coleydotmp4 what?

[@parks9459]

oh nvm ye its bc i was on a 2 hr trip from my home to trenton bc im in new jersey

[@dtn0640]

Hi

[@denyel_]

the video im gonna recommend to everyone getting into modding from now on!

[@shmanzo2793]

have you thought of trying to gas67? it seems to actually have a lot of similar modding capability to the 67 lite and seeing as it's way cheaper that could be cool for beginners to know

[@DJ-vq9rt]

What switch did u use for the build? It sounds sooo creamy :)

[@ClaytonGomberg]

Sounds great! which noico did you use, do you happen to have a link?

[@brittle1]

agree, mods made it sound way better! nice one

[@coleydotmp4]

Thank you!!

[@zhiccai]

Great vid.

[@Hoang-fg2zq]

Can i ask is your keycap are akko WOB and switches are nk cream ,right?

[@coleydotmp4]

Yes to both! But I am not currently using the creams, I wouldn't recommend them. I'd get Gateron Cj's or Crystal Icebergs over creams, depending on the sound profile you prefer.

[@saqif200]

The top case silicone is to prevent any contact w the plate idk if the pieces of stabilizer pads r enough to replace them. Just a thought

[@coleydotmp4]

the thick poron gaskets+ pads on top of the plate are more than enough, plus I've had that config on my keeb for over a year now and it works flawlessly and sounds fantastic. But if you don't want to do the mod, that's up to you!

[@taotie7968]

Underrated af

[@derekdinh5632]

I was waiting for this one to see if they is anyother mod i should try, i dont mind keeping the silicon mute pad, but im definitely going to try the tape mod.

[@jonathangapay1724]

Ok this is another good video I needed to watch. I’m just dipping my toes into this rabbit hole of a hobby and ordered bits for the kbd67 lite r4, and the mute silicone was not available and kbdfans isn’t going to restock it. 😅 Now I know how I can mount the plate to the case.

[@kirti3839]

Tbh I really should have just gotten other stabs for this board. I took apart this board and put it back together more times than I want to admit just to fix my backspace. The tape mod is probably my favourite, depending on the board it brings out a unique sound. The rest of the mods are also really interesting but honestly I do kinda like a muted board sometimes. The rest of my small collection all have very distinct sounds, sometimes with no or barely any foam inside. So I guess for me it's just another unique thing about this one. But all in all, great video. You probably took this thing apart more times than I did, and I'm already sick of it. Amazing work!

[@Финнейпук]

me too lmao

[@blackcatooow]

ended up a sub after this, i went for r3 soon as it was up during black friday and got the board and all, lubed + flimed pom durocks and stock board, the deepness of the sound really got boring in the first couple days , ive since been wanting to introduce more pop or clack to it to it but no idea how, i cannot comprehend why people go for more thock more deep and continue to push towards it.

[@coleydotmp4]

Thanks for subbing!! Yeah I agree. I think we can all have different preferences but I'm disappointed that overall consensus in the community is that deep/thock/muted is superior. We should be helping everyone achieve the sounds they want!

[@blackcatooow]

@@coleydotmp4 true! and also simply appreciating different sound signatures since the truth is that those require a lot more to achieve than condensing foam inside just about any keyboard

[@patrickjeromeobaldo2450]

You can also use the stabilizer washers for this force break mod.

[@Hecatonicosachoron54]

Good idea! Does this board need the force break mod tho

[@patrickjeromeobaldo2450]

@@Hecatonicosachoron54 Not really since it's plastic, but it does change how to keyboard sounds and it's shocking how different the sound is. Try it out if you have a KBD67 Lite on hand. I can also say that the of the two types of washers: cardboard or plastic, the plastic one sounds a bit better.

[@malte3421]

Thank you for the great video. I am on the quest to turn my q10 as thocky as possible, so I will try some of the mods listed.

[@chickenbeforeegg]

Ah yes, marbles bouncing down a thinly carpeted staircase

[@bigjokercommando6580]

Great Video! Where do you get the gaskets from?

[@_optimal]

I’m most definitely going to be doing the Tape and PE foam mod on first board, don’t know if I can gasket mod my BM43A with how it mounts since it’s a hard mount.

[@coleydotmp4]

Maybe not this type of poron plate gasket, but you might be successful putting little o-ring gaskets on the screw holes - look up the tofu gasket mod. it would be a very similar idea.

[@Hoang-fg2zq]

@@coleydotmp4 does the poron gasket more efficient than the d65 gasket stock ?

[@mx5kenny]

i love noico, haven’t used it in my keeb yet but i have it in my car and god damn that shits solid

[@perrytheplatypus1430]

Gained my respect for life

[@ripixll]

I modded mine with pe foam, but should I also tape mod mine, or does it not really make much of a difference? I also use the included case foam, tho im not sure how much of a difference that makes. P.S i brought those keycaps u recommended from aliexpress and its actually really good lol

[@coleydotmp4]

omg! That's all so great to hear (what colorway did you get of the keycaps?) Tape mod will help the board reverberate toward you (upwards), making the board slightly louder and poppier. If that's what you're looking for, it's super worth it especially since its so cheap, or free if you already own masking tape.

[@ripixll]

@@coleydotmp4ill definitely tape mod mine soon then. Also for the keycaps I got the dark blue "monster" one.

[@coleydotmp4]

@@ripixll Oh hell yeah! Such a slick colorway

[@froge159]

is the holee mod worth it? A lot of people in discord have been strongly against it saying that it is too mushy, and is a gimmick that youtube creators overhyped. They said lube and balancing is all you need.

[@coleydotmp4]

Holee mod will break in overtime. it will definitely feel mushy at first. especially if you put in too much material to the stems. If you're using a better stab than the durocks or the KBD stabs from this video, you probably just need to do a solid job lubing and tuning. I've found that the durocks take well to a holee mod once the mod is broken in. But you wouldnt need to do it on a TX stab, for example. it would be overkill. Overhyped? not when everyone was using durocks and cherry stabs. But these days, if you have a higher end stab, youll be fine with just lube. Hope that helps!

[@Kindred135]

Tried all the mods with Boba U4T's after watching the vid and obviously it still sounds like a plastic case but it's like the board has a voice again. I'll take higher pitched and louder over heavily muted.

[@minttu5381]

How much thickness is the pe foam that you put In-between the plate and pcb?

[@coleydotmp4]

Ideally as thin as you have! Youll know its too thick if the switches cant seat correctly into the PCB.

[@kevinanhtran5907]

how many layers of the gasket strip did you use?

[@amspo8518]

dope video

[@IronCan88]

I prefer the sound without tape mode. Also the force break mod is more needed for aluminum casing, since plastic doesn't ping like metals

[@elevator-_-6083]

Idk what it is but I still.. Like stock more… maybe tape mod but idk just sounds like the mods just took away the sound of the NK creams and replaced it with jelly sound IMO

[@itsmekinowa6052]

How thick is your noico?

[@coleydotmp4]

1.8 mm! www.amazon.com/Noico-Deadening-Automotive-Insulation-Dampening/dp/B07QY1X35P?pd_rd_w=xeja9&pf_rd_p=bb77d25e-38d7-4c74-a263-e922267edaaa&pf_rd_r=CN14WRVQR9XKPyoutube4E72NE0&pd_rd_r=902077b8-13da-4bf7-afce-f667409fcacd&pd_rd_wg=uVJYI&pd_rd_i=B07QY1X35P&psc=1&ref_=pd_bap_d_rp_3_i

[@iZeroIX]

Will be getting the 67 lite today with lavebder switches! Im hyped on my first custom keeb! Will try to do these modes but I dont really know where to get PE foam and Noico here in Norway. Good vid tho! Subbed!

[@coleydotmp4]

Have fun! Did you get Akko CS Lavenders or the Cannon Keys Lavenders?

[@iZeroIX]

@@coleydotmp4 I actuaøly got Durock Lavenders 😀

[@4glock.]

where u get the keybord stock

[@yeungdoug]

I want to build a silent keyboard using this. Already have Bobas U4. Any other suggestions to build a really silent one? Thanks!

[@coleydotmp4]

Yes - tbh, build it stock. haha. The stock config is really quiet because of the silicone. Tape mod makes it pop more. Honestly, build stock + the u4 silents and it should be prettttyyyy quiet.

[@coleydotmp4]

and if you need to make it more quiet, fill the case as much as possible - noico would probably be best but any other dense foam will work.

[@yeungdoug]

@@coleydotmp4 Thanks a lot for the tip! Really like your channel and how you approach things. Keep up the good work!!!

[@frebasaurus2331]

that thumbnail insinuates pure pain in those eyes.. were in for a ride

[@coleydotmp4]

Haha kinda. It was just so many rounds of taking it apart and tweaking it, rip. I had a different thumbnail planned but this screencap KZbin took for the recommended thumbnail was too funny not to use

[@TheRealEggPlayz]

Wait frebasaurus

[@ChubiPanda]

This was a fun watch. I'm always perplexed about this current trend to "chase the flex". How hard to people type? I always thought gaskets had a bigger impact on sound rather than feel.

[@coleydotmp4]

I think people dont give enough credit to gaskets for helping the sound. If you're on a board like the mr suit or the ikki68 aurora, then yeah the gaskets influence the typing feel because of all the flex cuts. But this, or even on the Keychron Q1 knob edition I just got, or the KBDfans D65... it's like yeah. There's flex. if you knead the keyboard like dough. lol. but those boards sound better than if they were sandwich mounted/integrated plate.

[@ChubiPanda]

@@coleydotmp4 I'm in for the ikki68 R2 so I'm looking forward to playing with that. Every flex test I've seen has the reviewer pushing down of the keeb like they're packing a holiday suitcase! It's just not realistic!

[@coleydotmp4]

@@ChubiPanda Haha right?! But the Ikki does have significant flex compared to other boards, especially at that price point. You'll have to let me know how it feels when you get it in! EDIT: also ironic your last name is Stiff lmao

[@ChubiPanda]

@@coleydotmp4 Mr. Stiff here to promote that stiff boards will be the hot item for 2022!

[@coleydotmp4]

@@ChubiPanda Haha you'd love my ID80! all aluminum integrated plate. Thing's a brick

[@Kxgura]

Where did u get the gasket?

[@skiddy1463]

*sits in chair with monster* it'll all be worth it soon

[@coolepicbu7710]

is it better to use mute silicone or plate foam or can you put both which one makes a clacky sound

[@coleydotmp4]

the clackiest sound would probably be getting rid of the silicone, replacing with other gaskets, and not using any plate foam/PEfoam mod at all

[@coolepicbu7710]

@@coleydotmp4 oh ok thanks

[@coolepicbu7710]

@@coleydotmp4 what gaskets i mean like what material

[@coolepicbu7710]

do i remove the mute silicone?

[@coolepicbu7710]

@@coleydotmp4 also one more questions sorry if im asking alot of questions im kinda new to costum keyboards i want my keyboard to be clacky but not to high pitch can i just put pe mod and plate foam is it still going to sound clacky?

[@christian.js.1997]

wow that tempest tape mod made a lot

[@coleydotmp4]

It's insane how cheap and easy it is to do. Big Brain Tempest

[@IlanDavid]

Did you install the Noico upside down on purpose?

[@coleydotmp4]

I figured the unpeeled paper facing upwards would result is a "Creamier" sound, but admittedly I'm not sure there's a difference. I also opted not to "stick" it in incase i didnt like what it did to the board

[@yourasianchum3659]

Did you use the pcb screws?

[@coleydotmp4]

The screws to hold the plate to the pcb, yes!

[@mgr6393]

very entertaining for a channel with

[@coleydotmp4]

Working on it, I think right now lighting and my new tripod i just got will help a ton :)

[@coleydotmp4]

7:04 is a good example of my level of quality when my lighting is good and i record natively on my camera, instead of through OBS. I have a solid camera, just need to get better at setting up scenes. Thank you for the feedback, though!!!

[@shmanzo2793]

niceeeee! if you're after flex though have you thought about trying plateless? it seems to work really well and with these mods (except for removing the silicone) it'd sound really nice

[@coleydotmp4]

I have considered! The plateless on kbd67lite seems a bit sketchy just watching Andy N's video. but it would be worth experimenting.

[@Dawation]

i build a 67lite r3 for my friend and used stock stabs and they sound great even after a few months. idk why people always have problems with them lol

[@coleydotmp4]

I mean they're definitely not the first stabs I've lubed + tuned. I could get them initially sound good but after some use, they would start to tick/rattle again. KBDFans stabs are definitely better than GMMK "goat" stabs, and most stock stabs in DIY kits at this price point, but I'd much rather upgrade them. Glad they work for you though! Thanks for watching

[@Dawation]

@@coleydotmp4 i only lubed them with 205 and they havent started ticking in two months. Good job on your board btw, sounds great

[@QuickE23]

You should check out the ciy gas67. It's like a bugdet Kbd67 lite it's like 60 usd on drop and 30 on taobao

[@frosty-dr6uw]

What size stabs 6.25 or 7 for the durocks

[@coleydotmp4]

This is a 6.25u spacebar. depending on the vendor a full set of durocks should include both 7 and 6.25!

[@frosty-dr6uw]

Ok I am buying them from kinetic labs they make you pick between the two so I will get the 6.25u thank you

[@DanielBerthellemy]

Medical cotton that every house hold owns can be used as keeb filler, works like a charm for me.

[@hotmintchoco]

the tempest tape mod is seriously a game changer haha

[@Daki-dz6gl]

In my opinion i like the muted sound but its really preference

[@TdogCute]

What’s some mods I can do on the board with the silicone in it?

[@coleydotmp4]

Tape mod for sure! And if you want the board to be quieter, filling the bottom of the case. I've heard some people were able to do the PE PCB foam mod even with the silicone, so it could be worth a try, or switch pads. Also, change out the stabilizers for sure!!

[@TdogCute]

@@coleydotmp4 Thank you! btw I love your content keep it up.

[@keebyky5808]

You should do a video on going plateless with the kbd67 lite. It made mine sound way better than gasket mod

[@baccalieri7561]

really good build and mods, but those nk creams hurt the sound badly with the scratch imo.

[@coleydotmp4]

Dont worry, replaced them quickly and only used them at the time because those were the only switches i had on hand. currently got gateron V Birds in there :) no scratch.

[@baccalieri7561]

@@coleydotmp4 poggies. I really like the aesthetic of NK creams, sad they have really bad scratch when they aren't broken in.

[@sigmafun3880]

I'm gonna be honest: I don't like the new sound that much. PE foam + tape modded keyboards sound all the same, the sound is very dry, simple, doesn't feel like quality. Those are good mods I would recommend to do on very budget keyboards, like prebuilts, but in my opinion the KBD67lite can sound better than that. Anyway, it's a great vid and I absolutely support you. Modding the stabs is a game changer.

[@jairlopez2209]

I’m getting my kdb in a couple days what mods do you recomend, I didn’t buy the d65 gaskets so I will most likely use the silicon do you have any suggestions to make it sound deeper

[@sigmafun3880]

@@jairlopez2209 In my opinion, the easiest way to obtain a deep sound (without drying it with PE foam) is just to use switches with a deep sound signature and SA profile keycaps. If you want to reduce the hollowness, I suggest you to fill the case with silicon: KBDfans sells a bespoke silicon mold for the case, but I think it's sold out, so you can just do a silicon pour. You can also fill it with EVA foam but the sound will be more muted and less thocky.

[@jairlopez2209]

@@sigmafun3880 can I keep the mute silicon and I am using milky gat yellows with Akko asa keycaps since it’s more of a budget build

[@ccat3095]

uhm what is that keycap profile?

[@coleydotmp4]

ASA, it's akko's take on SA profile! Shorter at the top, I have a video about this set here: kzbin.info/www/bejne/p2KnqIGpaq2GaKM

[@ccat3095]

@@coleydotmp4 tysm

[@dico8199]

No dico mod? Sad

[@coleydotmp4]

im sorry dico i failed you how can i make this up to you???

[@dico8199]

@@coleydotmp4 It's fine lol. But Dico mod>Pe foam mod

[@Финнейпук]

Im going to these mods the board sound so good

[@leopold429]

New vid yess

[@dan7696]

have you thought of trying the bottom silicone pad? it surprisingly makes the board sound poppier and unmutes it, and with a proper gasket mount and pe foam it'd probably sound similar to a mr suit

[@coleydotmp4]

I have not, but great suggestion! I ended up changing my switches to the new Crystal Icebergs (review coming soon) and they helped the sound signature of my board a ton. Here's the sound test I helped make for those switches: kzbin.info/www/bejne/hIXapaNtaddjf9k

[@coleydotmp4]

Because tbh, i think a lot of the lack of pop is due to the creams being such a deep sounding switch. I just didnt want to change out the original switch, so the sound comparisons were fair throughout the video.

[@krystall995]

Am I the only one who cannot make the PE foam mod?

[@coleydotmp4]

Is your foam too thick? that might make it difficult. Whats the issue?

[@krystall995]

@@coleydotmp4 It should be around 1.5mm thick. Maybe yours is thinner than mine. Do you have any foam recommendations? Anyway, did you use silicone dampener too? Maybe that's why I cannot make it. I'm trying to make the PE foam mod while still using silicone dampener

[@coleydotmp4]

@@krystall995 I'm not sure the size of mine. It came as packaging to an old keychron k4. I do not have it with the silicone dampener, but you should be ok to have both. What is the issue though? Are the switches not actuating?

[@krystall995]

@@coleydotmp4 yes. The switches cannot be fully place on the pcb, because there's too much space between pcb and plate, since there's silicone dampener and pe foam that make too much thickness. Now, I'll try to make the mod without silicone dampener

[@pandadoubl3561]

Aww I still did not found how to make KBDFans stabilizers sounds good :( Rip But good video and really good mods

[@coleydotmp4]

you could try holee mod - that might help eliminate rattle for a longer period of time than just jamming a ton of thick lube where the wire ends sit.

[@coleydotmp4]

my issue was the rattle would come back on those stock stabs after using them for a short period of time, regardless of how much i put in.

[@pandadoubl3561]

@@coleydotmp4 Okay, thanks

[@monke9386]

How painful is the modding

[@coleydotmp4]

Haha its actually not bad at all. What was painful was me having to go back and keep adding more because i knew it could be pushed further - probably took the thing apart and put it together 6 times haha

[@pandadoubl3561]

@@coleydotmp4 Actually the worse part in modding a keyboard is screwing and unscrewing... It's so frustrating

[@pandadoubl3561]

Waiting... Still waiting... Have to wait 3 hours...

[@dpenguino2540]

i did them all and its still not thocky

[@coleydotmp4]

What switches you rocking?

[@dpenguino2540]

gateron hippos

[@ThockyDocKey]

soooo cool! Did something similar on my channel, I also upgraded the PE foam. Would appreciate your inputs if you have the time to drop by. Congratulations on your growing channel. Lovin the content and your voice as well :)

[@aleror1]

Waiting .... Intesified

[@tanessadraws469]

COLEYDOTMP4 IM UR BIGGEST FAN PLS DO THE WHIP AND NAE NAE!!

[@coleydotmp4]

*hits whip + nae nae* for u tan

[@petter3995]

I just built mine.

[@QuickE23]

Try the gas 67 it's pretty cheap and offers a similar kit like the 67 lite

[@antasari_ahmad5325]

📌TRUE !! and i ❤ ur Video Review #kbd67liter3