TESTING FIKE TWINFLEX PRO PANEL AND MCP | FIRE ALARM DEMO

[@DanstheEngineer]

Don't forget to visit the playlist for this series of fire alarm panel and MCP demos VARIETY OF FIRE PANEL AND MANUAL CALL POINT DEMO: kzbin.info/aero/PLihy68GHHjMdlJCT9qXo3T1eDg4kpPvWw

[@mrtopbreak333]

What's the best way to install a Fike 600-0092 Twinflex Remote Indicator setup, I need to be able to shut off a gas solenoid valve , do I just connect on a zone circuit? Aux or I/P O/P terminals Thanks

[@Ed.E]

Interesting vid - thank you!

[@chavztv]

Nice talent lods

[@omerkivrak]

If I’ve lost the key. What’s the generic code?

[@antonios4926]

8737

[@davileben5666]

It would be very handy to have a real fire test with model Fike CIE-A-200!

[@garrybuntain6873]

Very simular there is a key or code your supposed to press the call point then the key reset the call point

[@imreszappanos690]

Is this panel the same as the ESP MagDuo panel and are the devices the same ? Is this system conventional?

[@antonios4926]

How do reset the engineer's code as someone has changed it. Fike Twinflex pro

[@rickyreynolds17]

Dan - Question - can you use the new style sounder/strobe with the old style of twinflex panels? Cheers

[@DanstheEngineer]

rickyreynolds17 if you mean the combined ASD with sounder strobe, then yes it can go on both Twinflex and Twinflex Pro panels.

[@rickyreynolds17]

Dans the Engineer the old style non LCD panels? Thanks for the quick response :)

[@DanstheEngineer]

rickyreynolds17 yes on the that's the one.

[@FNDmusic1322]

Somebody tell me about EOL missing shows in alam panel what can I do to solve this

[@antonios4926]

Go to the last device and set it to EOL NUMBER 1 IN THE ON POSITION DOWN

[@garrybuntain6873]

Are you talking about on the twinflex pro ? If so there is a dil switch on the detector/ manual call point or sounder to enable the eol

[@nisarhussain9840]

Does this system need EOL monitor or resisters

[@uksds3806]

Resistors

[@haroonwaziri9639]

Hello

[@anthonymachin564]

Not enough information about the panel any one can test a call point

[@IITRIGSII]

Shocking panels, shocking product. Worked at a company that’s used it for years, non compliant settings on the detectors, no thanks mate!

[@DanstheEngineer]

SILENTx xTRIGGER not a fan then!

[@yeety1208]

@@DanstheEngineer To be fair they do have some reliability issues, especially the older panels

[@ryanwest2359]

@@yeety1208 changing the two back up lead acid batteries , do I have to switch mains off to do this ? Can I leave power on while I do the switch ?

[@yeety1208]

@@ryanwest2359 nah you can leave it on some panels will not power up just on batteries, not sure about twinflex pro tho