Testing out my new Ram micro motor handpiece. Carving. Wood carving. Power carving.

I just got my new Ram micro motor carving unit/handpiece and i thought i would show it on youtube for the power wood carvers out there.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?aff=24
All the carving tools i use are in this amazon shop listed below👇
www.amazon.com/shop/carvingfu...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/carvingfusion
etsy.me/2Usrss6
/ carving_fusion
/ carvingfusion

[@lynnkuzio7904]

Is this the same one that's now 180 .00 America dollars? I get really confused at times I love all ur videos u r the bomb ! U & Rob .I had a wreck in 3/2021 had concussion for 3 mths.still I don't get things like others which I have never did ! But seeing things done helps me more than reading .Sometimes I can't comprehend when I'm reading I want to applause u for the way u take ur time trying to show others how to do things the correct way .To me u r a gift from God giving all u do for people u don't even know .I hope when I get back on my feet I can try & give back as much as u do 😊 Sorry about me sending u a message out of the blue again .But I just want to ty again for all of ur kindness & for always making us guys laugh .you & Rob to me R both awesome I love watching all yells videos 😊😊 u both r awesome 👌 & r always making me laugh 😊God Bless 🙌 💖 you both 😊

[@CarvingFusion]

:) yes it's the Ram.icube carver

[@mikedelauter904]

Very cool. Yeah, "knock offs" usually just cost ya more money in the long run (Y) "Good day, carry on"

[@NorCalSucculentShop]

Great show and tell video. I like how quiet that new machine is.

[@mtsinterests3255]

new nick name will be , "I barely touched it!" looks like a wonderful tool addition, Jordy.

[@CarvingFusion]

Lol

[@sterlingdavidgrasssr]

All i got to say is ,:if you can't trust Pete & Rob you can't trust anyone .. Years of experience, so let the chips fly Jordy, See Ya, Texas

[@augustcalderaro3797]

Very nice, Congratulations on treating yourself, awesome machine for sure, remember be kind to it and it will live a long life!!

[@glenmckelvey5952]

Not cheap but it looks well made . Looking forward to seeing what it can do .

[@carvingthewoodwjasonray5840]

Awesome Jordy! 👍 .... maybe one day my wife will let me get one🤔

[@shea3046]

Cool ! stepping up Jordy, still wanting the foredom. hope to catch you on Thursday. learning every video

[@PostalPhilly]

Wicked vid! Thanks for posting been wanting to see it in action since we spoke about it a few weeks back.

[@MultiTom1956]

Wow! This ram power is on steroids 😀 . Thank you Jordy for your review .

[@carloscreations6241]

Jordy I run my at 37 rpm and I think works better for me. Just my view sometimes higher but depending the Wood

[@KyleHallwoodworker]

Good stuff Jordy thanks for sharing. Looks like a great addition for you .

[@tiffanybelisle]

Oh that grain!!! Beautiful

[@bobv2247]

From what I see as a weak point at first glance is the supply wire going into the handle getting worn out from bending ,it happens to all power tools

[@lizakin1274]

Great new tool Jordy.

[@carloscreations6241]

I have the strong 202 micro motor and I love it.

[@janiceyee4857]

Just subscribe to your channel last week. Enjoyed watching and learning from your 3 videos so far. Lots to learn . Please keep on making more!! Thanks

[@CarvingFusion]

Thanks Janice there is lots of vids to learn from

[@karthiganapathi407]

One should compare at same speed.

[@CarvingFusion]

Ohh

[@tiffanybelisle]

I'm so excited for u

[@yaakovmoran4227]

It will take off more material

[@rodrigosouza3192]

Hi just love your chanel Can you do every thing you do with the dremel on the rampower?

[@CarvingFusion]

Hi yup

[@tiffanybelisle]

Nice... it even sounds cooler lol

[@hawkman1946]

You LL love it Jordy but its not a hog I have had one for 3 years and love it

[@CarvingFusion]

Wicked ok ty

[@charliemedley7699]

Wud b a good detail carver.

[@qwestt1304]

How is it holding up?

[@markduggan3451]

Looks and sounds great mate, bit too expensive for me. Are you going to replace your RTX?

[@donpayne562]

Looks like a extreme bit on that detail carver.lol

[@CarvingFusion]

Haahah it was

[@dereksturrock5546]

It's on my shopping list.. Do they sell them in the UK?

[@nomad_woodmizer696]

Wow that’s a lot of $$$, but if seems awesome!

[@tiffanybelisle]

Oh man I wish my rtx was that easy to change burrs

[@pamelalee1508]

Hi Jordy... Have you used the Ram much this last year ?...I'm wondering about the micro-carvers..if it might help with the the small details I've been doing...thank you...🌿🌿🌿

[@CarvingFusion]

Hi Pam Thank u for the pay pal, :) I sold my ram micro carver to parry dibbs last summer maybe ask larry

[@pamelalee1508]

@@CarvingFusion ... you're welcome.. Ok ..I'll keep researching...thank you...🌿🌿🌿

[@CarvingFusion]

@Pamela Lee I THINK the Micro carver master carver is a good bang for the buck

[@pamelalee1508]

@@CarvingFusion ...thank you...I'll check them out...🌿🌿🌿

[@ianmcfadden4709]

is another b/d in the books

[@CarvingFusion]

Yupp ill be getting another rtx

[@nomad_woodmizer696]

That’s cool! Is it expensive?

[@tiffanybelisle]

I dont understand why there is a reverse? So u dont have to move ur wood around to carve the other direction?

[@ianmcfadden4709]

sounds as if the 4000 is a little better under your heavy hand

[@CarvingFusion]

H Nahhh it ram is way more power and i wont be using it for lots of removal

[@evilevilrick]

re you sure your gonna be able to handle all that POWER? Hi Jordy.

[@CarvingFusion]

Im to afraid to use the tool ill break it

[@MrBrewner]

I don’t think 10k RPM is worth an extra $250. If your looking for a smoother finish you could put a $5 diamond bit in your $120 Dremel. It definitely doesn’t have the torque that the dremel has. The dremel is way more versatile that that thing. I could see that being very good for engraving or glass work but again you could just use your dremel for that too.

[@CarvingFusion]

Yup thats your opinion, I will be using the ram for detail not removing wood, it has way more solid power and smoother then the dremel

[@MrBrewner]

Peter Blair NO! You obviously can’t do math so I’ll explain. The ram power runs at 45,000 RPM. The dremel runs at 35,000 RPM. That is a difference of 10,000 RPM. exactly what I said in my post. If it was 10 times faster that would make it 350,000 RPM which it is NOT.

[@CarvingFusion]

Hey Big_B. Have u ever tried to carve with a micro motor hand piece?? If u havent it truthfully is a beautiful tool and im glad i spent the $$$ on it, It is a pro tool for smaller carvings and detail work, i wont be using it that often, but when i doo... I will love every second of it Maybe u should get one, U then would understand my point!!

[@MrBrewner]

Carving Fusion By : Jordy Johnson I have used one many times at my job. It definitely is nice to have for some things but not necessary. I consider myself a craftsman and don’t rely on gadgets to achieve a goal. I already own a dremel and have no desire to buy one of these things because I can get the same results and if I can’t, I’ll use the good ol fashioned hand tools and carving knives. That’s just taking away profit at the end of the day. Just my opinion!

[@yaakovmoran4227]

Lower your rpms...

[@CarvingFusion]

Lol