I take the Mecalac MC-8 to the Brickyard & test its claims. I push its limits to see if it can do what it says it can do.
Пікірлер: 355
@TemeculaBobby2 жыл бұрын
I’ve had the 8MCR for 18 months now. I have about 100 hrs on it. My first ex/skid. Sold my Cat 420D backhoe to get it. It’s for personal use on 2.5 acre home in Southern California. Hilly yard with 20’ elevation drop. I take pallets of pavers down 21% slope. A little scary even with blade down. My uneven yard makes for a bouncy ride. The wheeled version might be a better choice for my yard, but it’s a bit higher and does not get into tight areas as well. I can use the offset to a small degree to compensate for off-camber work. It’s super nice to extend pallets or buckets where the Cat backhoe could not be maneuvered. A bit of a gas guzzler compared to my Deere 210LE skip loader and New Holland 1630 Boomer. The skid steer bucket is 900 pounds empty. Loaded, forget about fully extending to the side unless you want to tip it. Front with blade down is at limit when heaped with heavy dirt. Keep load low and close for comfort and less strain on turret. Being able to ex and shovel by reversing buckets is very useful when working near retaining walls. I use the skidsteer adapter plate to run lighter buckets from my New Holland and a hydraulic auger. I was going to get the tilt-rotator attachment but paused on the $30,000 cost of the frill. Wish I had as cost has gone up. I think a good skidsteer operator can outperform the 8MCR in most scenarios, but some situations the MCR is a better choice. I appreciate its tele-handler function the most in my yard. It’s a very well made and designed machine. I saw it at the Las Vegas ConAg Expo in 2017 and 2020. Great demo. I decided my Cat was too big for my yard, sold it and got the Mecalac. Good choice for my use. Beat the multipurpose JCB offerings. Lifting 3200 pound pallets was key for me. That ruled out the smaller 6MCR. I’d get the counterweight as a hedge for side loads.
@danielstewart77322 жыл бұрын
Thanks for the real world info!
@ccowgill12 жыл бұрын
great dealership, im from ohio and got a 6mcr mecalac from trenchers plus last year. We use it for downspouts and sewer installs mostly, have used a skid steers brush grapple, harley rake, and rock hound with it as well on different projects. The only issues i have come across is that it weighs more than your average skid steer so slightly more yard damage (imprints from the tracks) and the skid steer attachments get offset slightly since they are centered on the boom and not the house. thanks for showing this machine off at the equipment show a few years back thats what got us interested in them in the first place
@Dirtmonkey2 жыл бұрын
Noted thanks for sharing your experiences with it. I wasn't considering getting one myself but I'm sure it'll help out others who are thinking about it. Sounds like it works pretty decent for ya
@vpweber2 жыл бұрын
Man, I wish they'd have let you run it for a day or two and really put it through the paces!! Great stuff as always, Stan!
@CZAnthonyX2 жыл бұрын
This machine is so incredible! I just got home from a long day of mowing, to a video from you, AWESOME! Keep up the great work!
@Dirtmonkey2 жыл бұрын
A good long day of mowing has a certain satisfaction to it.
@seandonaghy92242 жыл бұрын
I don't know if you were doing fire prevention mowing but that's what I'm doing over here California but I with you heat bugs birds and not trying to kill everything in the field give the the lizards a chance to eat the bugs the birds to eat the lizards and the heated eat us all up alive
@KarasCyborg2 жыл бұрын
Thanks Stan for asking the hard questions. I think I like it better than the JCB Teleskid. Not so crazy about that back sprocket, as the teeth might come in contact with the pavement and wear out over time, whereas most skid loaders the sprocket is at the highest point. Track changing /remount will be easier on this machine. It's not quite a zero-tail-swing machine, but looks good. Not too crazy about some of those exposed hydraulic lines because if you are going to push trees over with it, they could be snagged by falling branches or demolition type work of taking down a barn. Some of those lines between the boom joints look like they could be pinched, stressed. What is the hydraulic flow rating of this machine, can it run a big mower/mulcher? It's not going to be able to get under trees with the cab, but the boom gives you a pretty good reach under trees too, but it's going to contact multi-trunk trees. Are those tracks skid steer steel impregnated tracks or the weaker excavator tracks? The added lifting height and capacity is great to load high trucks and be able to pack down compost/dirt into a truck and help level it down. The tilt boom would be good for taper cutting a ditch. A new skid steer and excacator would be around $160k before taxes and dealer junk fees, so what does this all-in-one unit retail for?
@johnsonexcavatingandlandcl34732 жыл бұрын
I looked into the prices of these and just can’t justify the cost. One thing I did realize is many residential jobs I have run into, have overhead lines coming to the house, when using this as a skid steer to transport material the height of this machine becomes a hazard as opposed to a lower sitting skid steer.
@babiesfartingfire60072 жыл бұрын
Implement a mini skid instead ;)
@josephtellier77392 жыл бұрын
The 6MCR collapses down to 109 inches or just over 9 feet. The largest Bobcat CTL is just over 7 feet. If this one spec is your deciding factor, it will be limited, but these machines are not aimed at doing everything, but to be a more versatile tool. They are good for a single operator who only wants to haul, insure and operate 1 machine as opposed to 2 or 3.
@csresidentiallawnmowinglan72442 жыл бұрын
As a landscaper who has neither a skid steer or a mini excavator, I am drooling over this!
@Dirtmonkey2 жыл бұрын
Haha I bet 👍
@thebeans8042 жыл бұрын
I think your guys might enjoy that. That was awesome. Thank you so much for the videos. I truly enjoy them. ☺🙏
@charlesahon2 жыл бұрын
That is a pretty slick machine. I can think of lots of ways to use that. Thanks for sharing it.
@Dirtmonkey2 жыл бұрын
Yessir me too. Thanks for being here
@alangraham45262 жыл бұрын
These are used all over Europe for the last 10 years or so. The design criteria for Europe is different than the USA as generally smaller spaces / jobs so a small contractor needs to pack a lot of bang for the buck in one machine if possible. Also access for transport and storage of 3-4 machines on site is an issue too as even the smallest of jobs could do with an excavator, skid steer and loader come crane. Most European venues do not have lowboys nor the access for a lot of equipment so this type of machine make sense. Downside is any mechanical / hydraulic issues the job is shut down there is no other machinery around to get you out of a bind but that said you are only maintaining 1 machine also!
@Dirtmonkey2 жыл бұрын
Great points. And I had no idea they were using these all over Europe for a while now, that's pretty sweet.
@jefffielder2429 Жыл бұрын
Thank you Stan is always interesting to see what you show
@fredpayne75812 жыл бұрын
This is awesome, so glad you did this video, was gonna include asking you to in other comment but forgot, brother you do a fantastic job explaining everything, awesome 👌
@Dirtmonkey2 жыл бұрын
Thanks Fred👊👍
@CarlGorn2 жыл бұрын
I'm surprised it doesn't come with side stabilizing feet like I've seen on Yanmar tractors. That would go a long way to letting that arm extend out more with weight, by lowering the center of gravity.
@V4zz334 ай бұрын
Man, when I was in plant hire, we and our customers would have loved this! Especially council. Saves them money.
@ascott68042 жыл бұрын
Got a quick fill and grade, this is a viable option! Edit: I never would have seen this machine other than this vid!! Never knew.
@Dirtmonkey2 жыл бұрын
True that
@landscapingspecialist2 жыл бұрын
That’s what I was thinking, 1/2 the amount of equipment to move around while still efficiently completing the work.
@gerardsirrine93702 жыл бұрын
Loved the video I'd love to see them let you take it to your farm and put it to a test demo God bless
@Dirtmonkey2 жыл бұрын
That would be interesting but I don't think it would happen.
@glennwolfe16632 жыл бұрын
Stan, I'm not an operator, but the concept appears to be fairly sound. Thanks for sharing and always look forward to your videos👍👍👍👍👍😸🤗🐺
@Dirtmonkey2 жыл бұрын
Thanks for watching!
@rayrussell60642 жыл бұрын
Way to go Stan at least you got nate to push it as far as he was comfortable most salesman wouldn't do that. Thanks for taking me along and as soon as I get rich and shamless I'll buy one or even win the lottery. God bless and as always be safe 👍
@Dirtmonkey2 жыл бұрын
Hahah well said. Thanks for being here!
@dennislamers9862 жыл бұрын
What a great machine. I would love to play with that thing.
@Dirtmonkey2 жыл бұрын
Truly a beast
@dexewing12 жыл бұрын
That's a truly unique and interesting machine. So if a contractor has a need for both a skid loader and excavator, they can purchase this one machine and have essentially both, as opposed to purchasing two machines....having to maintain two machines...having to transport two machines to the jobsite and back...substantial cost savings right there. Very cool. I dig videos like this Stan. More please as time and scheduling permit!
@Dirtmonkey2 жыл бұрын
Yep you nailed it. Glad you like em! Thanks for sticking around
@Ninjump2 жыл бұрын
Not to mention it can also act as a reach fork or mini crane for single story construction if you have a jib attachment. I'm a GC, this thing would fill so many roles for us.
@courier11sec2 жыл бұрын
That machine would be perfect for the little sustainability lab community I'm in. Really great little unit. For what we do.
@Dirtmonkey2 жыл бұрын
Awesome. What kind of stuff do you guys do?
@courier11sec2 жыл бұрын
@@Dirtmonkey We've got all sorts of stuff going. We've done a lot of hand built adobe structures, we have quite a few food bearing micro gardens, hand built the potable water reservoir for our well and currently an experimental evaporative cooling tower is in the works. Passive solar hot water all over the property and currently working toward becoming independent of the power grid with our own solar electric. That's going to take some time, but we're hoping to have our well completely grid independent in the next year as well as the swamp coolers for several structures. We're out in the desert in southern AZ.
@EddieSchirmer2 жыл бұрын
a self leveling function while using the pallet forks, would be an amazing feature for both safety and efficiency... i wonder how that could be done, or if some one has already figured it out.
@RadDadisRad2 жыл бұрын
It would be great while hauling a bucket full of stuff too.
@Dirtmonkey2 жыл бұрын
It might have that built in but I don't know for sure.
@yardvarkslawncare78662 жыл бұрын
Great idea
@jonathanlanglois27422 жыл бұрын
That kind of functionality does exist on many other machines. It is really just a question of licencing code and adjusting for the capacity of that machine.
@gunfisher46612 жыл бұрын
Personally I was thinking how nice it would be to have the 4 way hydraulic joint at the bucket mount like on some of the euro peon only models I`m sure it would cut down on the heavy duty portion of excavating but is a usefull feature in my figuring. But a typical skid of block often go 3600-4000 lb. another con I see is it has a lot more hydraulic hoses than a typical track hoe for those that use em for what they are worth will be crying adbout blowing hoses on occasion. would`nt mind having one to play with in Ohio.
@tangiewattles86802 жыл бұрын
This a really cool piece of equipment
@Dirtmonkey2 жыл бұрын
Its an interesting combo to say the least
@brianmassey58972 жыл бұрын
Nice piece of equipment could use an auto leveler for when lifting certain things would be nice. But from what I seen it's a good little unit.
@paulkramer41762 жыл бұрын
Wow, I wish that had been around 5 years ago when I bought my excavator. It sure would be nice to have the loader and forks. Yep, nice to have two vehicles, but nice to have one that does a lot of things. I'd take it over ONE machine.
@Dirtmonkey2 жыл бұрын
My thoughts too, wish this came out a while back before I got what I already have
@TheRock-ww8rd2 жыл бұрын
It was around 5 years ago. Nobody knew about it. The machine has been in Europe for 15 years or so
@kylekroschel38792 жыл бұрын
@@Dirtmonkey so you bought a new one already?
@rogerozdarski29352 жыл бұрын
Very interesting videos. Still not sure about the machine. But I'm thinking about getting somemore information on it. Thank you Stan, you've got me thinking.
@daltonhayes53812 жыл бұрын
Love the look of this piece of equipment
@kylequinn19632 жыл бұрын
I'd rather have a skid loader and excavator, but honestly, this is insanely useful. I just feel like I couldn't do grading work nearly as fast as I could with a skid loader
@Dirtmonkey2 жыл бұрын
I agree with you. I don't think it would do grading or digging as good as a dedicated piece of equipment.
@mjberta73192 жыл бұрын
@@Dirtmonkey its like a Swiss Army knife, not amazing at everything but good enough at it to get by... Especially for someone just starting out who can't afford 2 pieces of equipment, I think it would be great to do trenching for plumbing and electrical inside structures like schools and warehouses, I definitely could have used something like this for a couple jobs where a mini fit but we needed to backfill and couldn't use a skid steer and it was against a wall so we couldn't use the mini either
@kyledavis22952 жыл бұрын
Depending on price because there is a jcb 1cxt already out …
@landscapingspecialist2 жыл бұрын
What you plan to do with any piece of machinery will tell you what’s better and what’s not. Impressive to see it lift a double stack of standards and remain completely composed(ideal surface conditions)
@landscapingspecialist2 жыл бұрын
@@mjberta7319 yes I could see it being boss for backfilling
@mikeknight98182 жыл бұрын
Almost wish i wasn't retired.I'd love to be operating this
@pedrocaballero14972 жыл бұрын
Very versatile piece of equipment. A proficient operator can circles around multiple operators using numerous pieces of equipment at the same time. One has to wonder how many millions of dollars it costs to acquire it and all the accessories.
@Dirtmonkey2 жыл бұрын
it costs about 140G
@blondeguy082 жыл бұрын
This machine is great for not having to constantly turn like a skid steer.
@tommywalton19742 жыл бұрын
This thing has major hardscape potential. Put me a tiltrotator on that thing and wow
@Dirtmonkey2 жыл бұрын
👌👍
@Ninjump2 жыл бұрын
Hard agree 💯
@isaachill47252 жыл бұрын
Love the videos Stan. It could be a good machine for someone just starting out.
@roberto.peterson99172 жыл бұрын
As a fork lift set up also have the advantage of a rough terrain forklift with extention of boom reaching in or over obstacles better than just fork lift
@Dirtmonkey2 жыл бұрын
as a rough terain fork lift its probably one of the best I have seen.
@Ryan_Maineaquaria2 жыл бұрын
Now just imagine that mecalac with a tilt rotator and a grapple like you use for placing boulders!
@Dirtmonkey2 жыл бұрын
A dream!
@PAINFOOL132 жыл бұрын
I don't know shineola about tractors but I like this one. Thanks Stan . We can always count on you for indepth vid 🙏🏻👍🏻
@Jpipify2 жыл бұрын
I looked it up and it looks like they have those attachments.
@andysukosd81772 жыл бұрын
Cool video, Loved watching.
@Dirtmonkey2 жыл бұрын
Thanks man appreciate you 👊
@pcatful2 жыл бұрын
I don't know much about this machinery but that's impressing me anyway.
@landscapingspecialist2 жыл бұрын
What I like is the scenario where you already have EITHER a mini-x OR a track loader. If you get one of these now you have 2 mini-x’s AND one loader OR 2 track loaders and a mini-x.
@Dirtmonkey2 жыл бұрын
Yup pretty neat 👍
@jrmorrissey207 Жыл бұрын
This thing could pick up a mini-x and toss it across the yard. This is way more functional that what people seem to think here. The sales guy was slow and clumsy, (no disrespect), so hard to tell how productive it would be. My guess is 2 of these units, with two experienced operators, would beat 4 separate units (2 skids and 2 Ex) in a production comparison, especially when you consider maintenance, cost, and transportation. This thing is an actual excavator with pretty crazy power for its size.
@jamesgarrison64302 жыл бұрын
As a sales man he's doing just fine
@Dirtmonkey2 жыл бұрын
I like unpushy saleman that let the equipment do the selling.
@Joshsibley142 жыл бұрын
a swivel attachment would be a bonusssssss!!!
@Dirtmonkey2 жыл бұрын
Oh yeah!
@joshuaplacka84802 жыл бұрын
My only problem us i would still want my track skid loader. You can still only do one job at a time. Most jobs are multi faceted. Bad ass machines, I want one.
@Dirtmonkey2 жыл бұрын
I agree with ya on that. When you run 2 jobs you still need 2 machines.
@digger78712 жыл бұрын
No dealer anywhere in my neck of the woods. Been wanting to try one of these out. Maybe some day
@Dirtmonkey2 жыл бұрын
🙏👍
@stanhensley30822 жыл бұрын
That machine could do a lot of work in a small space.Thanks 😊
@Dirtmonkey2 жыл бұрын
True that 👊👊
@Charlie-go6eb2 жыл бұрын
Neat piece of equipment. The price’s I’m seeing are 135-140k, not sure if that is accurate or not. That said, if it is around there, my SVL75 and KX040 were roughly 20k less new together. That’s two loaded machine’s. Full cabs, ac, high flow, 6-1, etc. I’d rather the two machine’s. As neat as it is, it simply wouldn’t put out the work two machine’s like I have working in tandem. Would probably be close even with a single operator switching out of machine’s. Nice piece of equipment though.
@Dirtmonkey2 жыл бұрын
Feel it
@Charlie-go6eb2 жыл бұрын
@@DMAX-tp4pc I loved my T190. Machine was flawless for many many years. I’m older(lol) and was very good with the foot controls(had pilot to), took me a while to get use to the Kubota.
@AndrewShafer2 жыл бұрын
It's a sweet machine, found some used ones under 80k for a 2012, but for 160k or more on the newer side, you could easily get a skid steer and mini excavator for the same money. Also seems like it would be slow for grading and other typical skid steer tasks, but a really cool idea. Impressive how easily it could swing around 5000 pounds
@Dirtmonkey2 жыл бұрын
Good pointers, definitely versatile and can be super helpful but that doesn't mean it's going to give you the greatest results
@mekosmowski2 жыл бұрын
Travel time to haul both machines vs one trip for this.
@AndrewShafer2 жыл бұрын
@@mekosmowski that's true, it would be great for a quick project, but I think you're still winning with two machines even after the extra time and diesel...especially at $200k. Plus you can bill more for having two machines on site lol
@AndrewShafer2 жыл бұрын
@@Dirtmonkey thanks for the reply, love your videos Stan
@jlbush8249 Жыл бұрын
I don't see how it would be slower than a standard skid steer.
@scarab9762 Жыл бұрын
Jack of all trades.. master of none!
@chummymcgee28237 ай бұрын
often times better than a master of one
@tonynewton79022 жыл бұрын
Nice one Stan. 👍👍🏴🏴
@Dirtmonkey2 жыл бұрын
Thanks Tony 👊
@kylejohnson65412 жыл бұрын
We have a mcr6 we love it makes it less crowded on job sites
@rickward43842 жыл бұрын
man they would have to do something with the rats nest of hoses on top of the boom for me to consider buying one. I see it as an excavator with options...not a skid loader at all. More testing on the job would be needed, I have been clamping the skid buckets in the minis and using them to carry material for decades not sure this is a game changer.
@evilbrat53762 жыл бұрын
Noticed that it would help if the machine had a self-leveling ability, would make it safer lifting weight up higher or further out, not bad for a salesman - operator.
@Dirtmonkey2 жыл бұрын
Yeah that seems necessary too
@scottliska30882 жыл бұрын
Hi Stan thank you for the excellent video as always it would be great to see you do a follow up video to answer some of the questions about self levelling and high flow hydraulics also can you put a grapple on it? Another thing that would be great is to see you buy or lease one for a while to see how you and your operators like it and how it goes in real world applications Would you buy one of these machines yourself? And lastly I would love to see a video on the Mecalac loader.
@Dirtmonkey2 жыл бұрын
I wouldn't buy one just because I already have machines that do exactly what this does, this just does it all in one. I could see how beneficial it would be for someone starting out that just wants to get one machine for multiple different uses though
@vaughnburrows Жыл бұрын
@@DirtmonkeyStan if you we’re starting all over would this be your first machine?
@tonnyplaysgames220dailygam52 жыл бұрын
Another great video
@Dirtmonkey2 жыл бұрын
Glad you enjoyed. Thanks for supporting
@oldmanSturzl2 жыл бұрын
A few questions: 1) What does it cost? 2) What is the name of the dealership? 3) Can you float the bucket like a a loader? I love the idea of this machine for retaining wall builds but would be nice to have a swivel grapple or at least a thumb.
@ExcavationNation2 жыл бұрын
Used they are 120,000 to 190,000 🤣🤣
@ExcavationNation2 жыл бұрын
New you have to call for pricing 😜
@ZacharyE4 ай бұрын
6MCR w/ thumb is 129K new. Got mine last year and absolutely love it. I'm now feeling comfortable after 32 hours of use and I'm 100% new to heavy equipment.
@jrmorrissey207 Жыл бұрын
Hi Stan. Do you happen to remember what the sound level was like next to the machine. Stats say 99dB, which is loud, but it doesn't sound that loud from the video. Do you remember if it was exceptionally loud, or average loud, or reasonably quiet?
@landscapingspecialist2 жыл бұрын
I mean it looks like what I picture a cross between a track loader and mini-x would look like
@michelpicton83572 жыл бұрын
Amazing content!! 👏
@Dirtmonkey2 жыл бұрын
Thanks Michel 😁
@rays86112 жыл бұрын
Talk about a Snow Stacker!!! WOW that thing is awesome.
@Dirtmonkey2 жыл бұрын
Heck yeah 👊
@interestin97209 ай бұрын
SO just wondering if after a year, have you decided to buy one of the Mycatalac's yet cause this thing seems pretty sweet and just thinking of dropping a snowblower or forestry head on it me thinks would be really useful. Like for pushing back a massive snow pile or relocating a massive pile and condensing it or trimming branches over head with the forestry head and dozens of other things slash idea's lol.
@rgr34272 жыл бұрын
Thank you for part 2. Nate did well for sales guy, would have liked to see someone who has “big” hours on it run the thing. Agree with numerous comments, the Swiss Army Knife descriptor fits. Just seems a bit wonky. As to grading, digging and loading. 2 machines with experienced operators would run rings around this, ALSO with 2 dedicated machines working the job site -vs- 1 of these, you only can do one job at a time, mmmmm. Cool equipment though, if Dirty Monkey had a give-a-way contest I would sign up 😎 ***Monty is very seldom in the office; BECAUSE he is out fighting the Empire !
@davidmak38632 жыл бұрын
I just put 280 hours on my. I love it it’s the best one from 10 of my heavy equipment that I own.
@logresmentotum70652 жыл бұрын
Operating equivalent, it's gonna struggle versus 2 machines. But imagine how you maximize your staff and job load! A 2 person crew with just this can knock out a complex job where you would maybe need two trucks, trailers, and 3 or 4 people otherwise. That allows a 10-12 person company to really ramp up operations. I think this would be an amazing business amplifier for a crew like DMF.
@Dirtmonkey2 жыл бұрын
Well said. In certain situation this would be so helpful 👊
@actionsportster76862 жыл бұрын
I don't think you really demonstrated some of the things that sets the Mecalac apart. For instance, this machine when operated as a mini excavator, has a digging depth of 12' ... Not that you would want to try to go to that depth with the skid loader bucket attached, but think about how this machine could be used in skid-loader mode to grade an embankment without having to move the machine. And that's just one way this machine is capable of working outside the box. Just one question: How much?
@Dirtmonkey2 жыл бұрын
Good point, it sounds like the salesman doesn't even know all of what this machine can do! It's priced at around 140k
@racerx92232 жыл бұрын
This is where balls and an understanding of physics are important, any good skilled operator would be totally confident that they could just hover the load 2 or 3 inches from the ground and extend until it's touching and the weight is transferring forward, tipping the rear or side up slightly when trying to lift. It can be safely tested to the limits. Looks like it handled it really well though for the size of the unit, I'd like to stick a 12" bucket on it and see how well it rips ground!
@Dirtmonkey2 жыл бұрын
You got it. And that would be pretty cool
@tonnyplaysgames220dailygam52 жыл бұрын
Hot dang that a creative arm. I keep thinking back to that massive 11’ retaining wall y’all built last year. I’m wondering is there any way this machine would’ve sped things up or just plain made the job easier or safer for the monkeys. Great Innovative Machine
@Dirtmonkey2 жыл бұрын
Sure would've helped back then!
@terrencecescon102 Жыл бұрын
Stan the man, swing the thang!
@kingwood43572 жыл бұрын
I'm impressed 👍
@Dirtmonkey2 жыл бұрын
I thought it was cool!
@aaronmyers53492 жыл бұрын
I can see how in the right circumstances it would be handy. Like loading out of piles into vehicles, like mulch, gravel, or even dirt. On a jobsite trying to do production not the best of either type of machines.
@Dirtmonkey2 жыл бұрын
agreed. I see that as well
@aaronmyers53492 жыл бұрын
I would still like to try it out for a day and see how it would do.
@WOW-io2yp2 жыл бұрын
I feel this machine would be slow at all aspects of work , also I feel like there would be a lot of wear and tear . 5 ton excavator and skid steer would run rings around this machine .
@waltere.mellin35372 жыл бұрын
That's one versatile machine, and it is capable of loading a semi end dump too. But can it plow snow??
@Dirtmonkey2 жыл бұрын
Good question. I'm assuming it can given the universal attachment style
@1farmer6082 жыл бұрын
Hey Stan. I got a new summer job working for my city. I’ll be spending 8 hours a day doing lawn mowing and tractor driving which is going to be awesome. In other news I’m going to a flea market with Izzy on her birthday which is Saturday. She invited me which is great. Then after words I’ll go up to my cabin to run the kubota 10 hours a day to work on the road. I’m super excited. I have no idea what I should get Izzy for her birthday since we are dating now. Any ideas?
@Dirtmonkey2 жыл бұрын
"I have no idea what I should get Izzy for her birthday since we are dating now. Any ideas?" yes- it doesn't have to be expensive but should be well thought out. Every gift should have a meaning somehow and you then explain the meaning to her. if she enjoys a certain kind of gum- get her that. If she enjoys a movie or show get her a souvenir from her favorite flick. Lots of little things that don't cost much but have tons of meaning to her will go a lot further than an expensive gift. thats my opinion at least
@rileytrentham37782 жыл бұрын
Hey Stan. You should try and get a long term rent on one.
@Dirtmonkey2 жыл бұрын
Hmm we'll see
@rileytrentham37782 жыл бұрын
@@Dirtmonkey how much does one go for
@rileytrentham37782 жыл бұрын
@@Dirtmonkey how much does one go for
@robertvannicolo44352 жыл бұрын
Stan once again cool multi functional machine obviously salesman novice running it Impressed with weight capacity off side of machine 👍
@Dirtmonkey2 жыл бұрын
For sure 🙌
@brianpearl7504 Жыл бұрын
I wouldn't be picking up 5000+#'s up high on the side like that. I'm surprised it didn't tip over. Facing the tracks I would but not sideways.
@jonanderson51372 жыл бұрын
The salesman treated it like a red headed skid steer the whole time. Show it's capabilities as an excavator too.
@falsenamehaha2 жыл бұрын
Only thing I dont like is it's not zero swing and you can tell by the scratches on the machine, it's good to have a narrow track frame but what's the point if you cant slew in a tight area?
@justinotten66732 жыл бұрын
I wonder if this machine will end up like a TLB??? Seems like a neat concept, but maybe not perform either function as well as needed.
@nashcobb30562 жыл бұрын
here to help
@Dirtmonkey2 жыл бұрын
👊
@danielstewart77322 жыл бұрын
This would be an incredilbe machine for smaller companies, this is a do everything piece of equipment. Maybe doesn't make sense if you already have a bunch of other machinery, that will be better in its specific niche. But just having a single machine to service and insure and move, that can do most anything would be a real boon to smaller companies.
@Dirtmonkey2 жыл бұрын
Couldn't agree more!
@ericking9767 Жыл бұрын
Most other manufacturers sales guys can operate too...boys gotta learn
@wesleemiller2 жыл бұрын
That's awesome . You thinking about buying one?
@Dirtmonkey2 жыл бұрын
Nope, I already have the separate versions of this lol
@wesleemiller2 жыл бұрын
@@Dirtmonkey Awe, but its different. 🙂 Do you have a rough price on one? because I am interested in it.
@ianbond39822 жыл бұрын
For those that don't know, Mecalac has been in business for many, many years. There are plenty of videos on KZbin about them. I realise that the 2 guys operating are salesmen, but their are functions on these machines that they obviously dont know about. I now that when lifting, that there is a function that keeps the forks or bucket level, or can be used for bank sloping etc. The geometry of that boom makes them exceptional for lifting. For those that are asking, yes you can fit a grapple or any ter attachment to it, just like a 'normal' excavator, & they can be fitted with laser control for leveling site works. There is even a video of the Mecalac 15 tonne wheeled machine lifting & carrying, traveling, & placing a big concrete water/sewerage tank, from a trailer on the street, into the back yard of a house. These machines are incredibly versatile. Watch this 8MCR on demo at a European show, with a good operator in it. I'd buy one tomorrow if i had the use for it, which I did a few years ago, but life circumstances changed. The other excavator worth looking at is the 'Menzi Muck' !
@daltoniks2 жыл бұрын
how much does it cost?
@Dirtmonkey2 жыл бұрын
Wow that's awesome thanks for sharing those extra cool pointers on the machine!
@Dirtmonkey2 жыл бұрын
This one cost around $140K
@Poksutin2 жыл бұрын
that is really impressive :)
@sdrammm6969692 жыл бұрын
Amazing! I want one.!!!
@Dirtmonkey2 жыл бұрын
You and me both!
@irishpotota53062 жыл бұрын
I get the concept if it. Just think if you put a rototilt hitch an Scandinavian buckets on the digger it would be as even more versatile an more efficient, plus's it comes with the pinching grabbing fingers on the back if the hitch. The only advantage I see with this machine is its lifting center of gravity
@CareTaker20102 жыл бұрын
Cool like it
@Dirtmonkey2 жыл бұрын
Heck yeah
@supertopiacorp2 жыл бұрын
Thank you to share this video.What attachments does this machine have?I am going to go to the dealership to look how good is it.
@garyobelich4612 жыл бұрын
Like your mulchstash👌🤙
@Dirtmonkey2 жыл бұрын
😂👌
@Frank-bh3cm2 жыл бұрын
Bit of a learning curve. Would be great to see it in the hands of an expert operator!
@Dirtmonkey2 жыл бұрын
Heck yeah 👍
@gordowg1wg1452 жыл бұрын
Still not sure what makes this so unique? It seems to have two selling points based on that claim. 1/ the bucket can be backed up by the 'dozer blade, but other machines have that so there's something special about it? 2/ there is mantion of the controls being able to be switched but, to me, it just looks like it's going to be more confusing for the operator as the boom, dipper, etc, will operate differently to the same inputs - like getting the hang of the pedals depending on the track orientation, only more so. This may be down to my using excavators almost exclusively, heck I can't recall the last time I used a skid-steer. Oh, I thought I recalled seeing something like the loader before - you looked at the Mecalac product line at a show a couple years ago, according to the suggested viewing link 👍 For those that missed it - kzbin.info/www/bejne/jqi2qICAp9d9mKc
@ericking9767 Жыл бұрын
Cool machine
@TheHelgadog2 жыл бұрын
Interesting machine. Could save from having to by multiple machines.
@matty2helpfull2 жыл бұрын
If I had to buy one piece of equipment is gladly buy one of those that 16k unit is awesome
@Dirtmonkey2 жыл бұрын
Yeeehaw you betcha 👊
@matty2helpfull2 жыл бұрын
@@Dirtmonkey I would love to have a excavator. As a farmer that machine would probably the most universal machine I could have
@Dirtmonkey2 жыл бұрын
@@matty2helpfull You're probably right
@devin1976012 жыл бұрын
The cost is prohibitive when looking at the Mecalac. Pretty good machine though
@scottyz2 жыл бұрын
How much?
@Dirtmonkey2 жыл бұрын
$140K
@mrturnip8182 жыл бұрын
@@Dirtmonkey Not sure about in the states but here in Canada a new 8 ton cost about 140k. Seems cheap really. did they mention if you can run it in excavator mode with the loader arm down for extra reach?
@carlbeard410711 ай бұрын
I’m sold! Would you take a post dated check?!?!😃
@wcresponder2 жыл бұрын
Can it run a hydro-bucket? Consider doing a Menzi muck.
@Dirtmonkey2 жыл бұрын
I assume so, he said it works for all universal attachments
@efrainmontero5138 Жыл бұрын
I will like to know whats the breaking force and move the bucket full of dirt or stone up and down with out shaking the machine or trying to tip to the front
@BattlestarCanada2 жыл бұрын
Thanks, Dirt Monkey! -- I don't feel like I got the full experience as you weren't in the seat operating it.
@Dirtmonkey2 жыл бұрын
Lol you and me both..I'd say he still pushed it pretty hard though!
@BattlestarCanada2 жыл бұрын
@@Dirtmonkey Absolutely! Just miss the 'Stan' experience lol. Would they do a demo rental? I would love to see that in use on a few of your applications.
@greg36292 жыл бұрын
100k+ for a used one...not calling around to dealers to find out how much a new one costs...im guessing 175k lol So 2 separate machines..would cost a little more depending on what you got new of course. Might be a great new business machine.
@Dirtmonkey2 жыл бұрын
Exactly
@iveneverdonethisbefore83902 жыл бұрын
Wouldn’t any excavator operate as both if the excavator has a skid steer bucket that could be mounted forwards on the boom?
@brianspurrell33482 жыл бұрын
One thing I like about European is that they do really great in house engineering. i.e. BMW, Volvo and Mercedes. Just saying.
@Dirtmonkey2 жыл бұрын
Can't argue that point but parts availability scares me.
@matthewtoes64333 ай бұрын
Would this machine work in agriculture are there attachments to lift bales, earth augurs, post knockers water pipe layers